To effectively separate and recover Co(Ⅱ) from the leachate of spent lithium-ion battery cathodes,we investigated solvent extraction with quaternary ammonium salt N263 in the sodium nitrite system.NO_(2)^(-)combines ...To effectively separate and recover Co(Ⅱ) from the leachate of spent lithium-ion battery cathodes,we investigated solvent extraction with quaternary ammonium salt N263 in the sodium nitrite system.NO_(2)^(-)combines with Co(Ⅱ) to form an anion [Co(NO_(2))_(3)]^(-),and it is then extracted by N263.The extraction of Co(Ⅱ) is related to the concentration of NO_(2)^(-).The extraction efficiency of Co(Ⅱ) reaches the maximum of99.16%,while the extraction efficiencies of Ni(Ⅱ),Mn(Ⅱ),and Li(Ⅰ) are 9.27%-9.80% under the following conditions:30vol% of N263 and15vol% of iso-propyl alcohol in sulfonated kerosene,the volume ratio of the aqueous-to-organic phase is 2:1,the extraction time is 30 min,and1 M sodium nitrite in 0.1 MHNO_(3).The theoretical stages require for the Co(Ⅱ) extraction are performed in the McCabe–Thiele diagram,and the extraction efficiency of Co(Ⅱ) reaches more than 99.00% after three-stage counter-current extraction with Co(Ⅱ) concentration of 2544mg/L.When the HCl concentration is 1.5 M,the volume ratio of the aqueous-to-organic phase is 1:1,the back-extraction efficiency of Co(Ⅱ)achieves 91.41%.After five extraction and back-extraction cycles,the Co(Ⅱ) extraction efficiency can still reach 93.89%.The Co(Ⅱ) extraction efficiency in the actual leaching solution reaches 100%.展开更多
The recycling of graphite from spent lithium-ion batteries(LIBs)is overlooked due to its relatively low added value and the lack of efficient recovering methods.To reuse the spent graphite anodes,we need to eliminate ...The recycling of graphite from spent lithium-ion batteries(LIBs)is overlooked due to its relatively low added value and the lack of efficient recovering methods.To reuse the spent graphite anodes,we need to eliminate their useless components(mainly the degraded solid electrolyte interphase,SEI)and reconstruct their damaged structure.Herein,a facile and efficient strategy is proposed to recycle the spent graphite on the basis of the careful investigation of the composition of the cycled graphite anodes and the rational design of the regeneration processes.The regenerated graphite,which is revitalized by calcination treatment and acid leaching,delivers superb rate performance and a high specific capacity of 370 mAh g^(-1)(~99% of its theoretical capacity)after 100 cycles at 0.1 C,superior to the commercial graphite anodes.The improved electrochemical performance could be attributed to unchoked Li^(+) transport channels and enhanced charge transfer reaction due to the effective destruction of the degraded SEI and the full recovery of the damaged structure of the spent graphite.This work clarifies that the electrochemical performance of the regenerated graphite could be deteriorated by even a trace amount of the residual“impurity”and provides a facile method for the efficient regeneration of graphite anodes.展开更多
The recycling and reutilization of spent lithium-ion batteries(LIBs)have become an important measure to alleviate problems like resource scarcity and environmental pollution.Although some progress has been made,batter...The recycling and reutilization of spent lithium-ion batteries(LIBs)have become an important measure to alleviate problems like resource scarcity and environmental pollution.Although some progress has been made,battery recycling technology still faces challenges in terms of efficiency,effectiveness and environmental sustainability.This review aims to systematically review and analyze the current status of spent LIB recycling,and conduct a detailed comparison and evaluation of different recycling processes.In addition,this review introduces emerging recycling techniques,including deep eutectic solvents,molten salt roasting,and direct regeneration,with the intent of enhancing recycling efficiency and diminishing environmental repercussions.Furthermore,to increase the added value of recycled materials,this review proposes the concept of upgrading recycled materials into high value-added functional materials,such as catalysts,adsorbents,and graphene.Through life cycle assessment,the paper also explores the economic and environmental impacts of current battery recycling and highlights the importance that future recycling technologies should achieve a balance between recycling efficiency,economics and environmental benefits.Finally,this review outlines the opportunities and challenges of recycling key materials for next-generation batteries,and proposes relevant policy recommendations to promote the green and sustainable development of batteries,circular economy,and ecological civilization.展开更多
The worldwide proliferation of portable electronics has resulted in a dramatic increase in the number of spent lithium-ion batteries(LIBs).However,traditional recycling methods still have limitations because of such h...The worldwide proliferation of portable electronics has resulted in a dramatic increase in the number of spent lithium-ion batteries(LIBs).However,traditional recycling methods still have limitations because of such huge amounts of spent LIBs.Therefore,we proposed an ecofriendly and sustainable double recycling strategy to concurrently reuse the cathode(LiCoO_(2))and anode(graphite)materials of spent LIBs and recycled LiCoPO_(4)/graphite(RLCPG)in Li^(+)/PF^(-)_(6) co-de/intercalation dual-ion batteries.The recycle-derived dualion batteries of Li/RLCPG show impressive electrochemical performance,with an appropriate discharge capacity of 86.2 mAh·g^(-1) at25 mA·g^(-1) and 69%capacity retention after 400 cycles.Dual recycling of the cathode and anode from spent LIBs avoids wastage of resources and yields cathode materials with excellent performance,thereby offering an ecofriendly and sustainable way to design novel secondary batteries.展开更多
The proper recycling of spent lithium-ion batteries(LIBs)can promote the recovery and utilization of valuable resources,while also negative environmental effects resulting from the presence of toxic and hazardous subs...The proper recycling of spent lithium-ion batteries(LIBs)can promote the recovery and utilization of valuable resources,while also negative environmental effects resulting from the presence of toxic and hazardous substances.In this study,a new environmentally friendly hydro-metallurgical process was proposed for leaching lithium(Li),nickel(Ni),cobalt(Co),and manganese(Mn)from spent LIBs using sulfuric acid with citric acid as a reductant.The effects of the concentration of sulfuric acid,the leaching temperature,the leaching time,the solid-liquid ratio,and the reducing agent dosage on the leaching behavior of the above elements were investigated.Key parameters were optimized using response surface methodology(RSM)to maximize the recovery of metals from spent LIBs.The maxim-um recovery efficiencies of Li,Ni,Co,and Mn can reach 99.08%,98.76%,98.33%,and 97.63%.under the optimized conditions(the sulfuric acid concentration was 1.16 mol/L,the citric acid dosage was 15wt%,the solid-liquid ratio was 40 g/L,and the temperature was 83℃ for 120 min),respectively.It was found that in the collaborative leaching process of sulfuric acid and citric acid,the citric acid initially provided strong reducing CO_(2)^(-),and the transition metal ions in the high state underwent a reduction reaction to produce transition metal ions in the low state.Additionally,citric acid can also act as a proton donor and chelate with lower-priced transition metal ions,thus speeding up the dissolution process.展开更多
Traditional hydrometallurgical methods for recovering spent lithium-ion batteries(LIBs)involve acid leaching to simultaneously extract all valuable metals into the leachate.These methods usually are followed by a seri...Traditional hydrometallurgical methods for recovering spent lithium-ion batteries(LIBs)involve acid leaching to simultaneously extract all valuable metals into the leachate.These methods usually are followed by a series of separation steps such as precipitation,extraction,and stripping to separate the individual valuable metals.In this study,we present a process for selectively leaching lithium through the synergistic effect of sulfuric and oxalic acids.Under optimal leaching conditions(leaching time of 1.5 h,leaching temperature of 70°C,liquid-solid ratio of 4 mL/g,oxalic acid ratio of 1.3,and sulfuric acid ratio of 1.3),the lithium leaching efficiency reached89.6%,and the leaching efficiencies of Ni,Co,and Mn were 12.8%,6.5%,and 21.7%.X-ray diffraction(XRD)and inductively coupled plasma optical emission spectrometer(ICP-OES)analyses showed that most of the Ni,Co,and Mn in the raw material remained as solid residue oxides and oxalates.This study offers a new approach to enriching the relevant theory for selectively recovering lithium from spent LIBs.展开更多
Graphite, as a strategic mineral resource, the recycling from spent lithium-ion batteries(LIBs) has attracted considerable attention for meeting considerable economic value. However, closed-circuit recycling still suf...Graphite, as a strategic mineral resource, the recycling from spent lithium-ion batteries(LIBs) has attracted considerable attention for meeting considerable economic value. However, closed-circuit recycling still suffers from the lack of effective repair methods. Considering the existing defects, a series of Cchain length carbons have been successfully introduced to repair spent graphite. Obviously, with the evolution of carbon resources, the thickness and pores of the coating layer were tailored with the functional groups. Benefitting from the increased active sites and created fold structure, their coulombic efficiency is obviously restored from 14% to 86.89%, while the stable capacity is kept at approximately 384.9 mAh gafter 100 cycles. Moreover, their excellent rate properties are kept about approximately 200 mAh gat2 C, meeting the standard of commercial materials. Supported by the detailed kinetic behaviors, the enhanced rate is mainly dominated by pseudocapacitive behaviors, accompanied by deepening redox reactions. Meanwhile, the cost of the proposed approach for recycling spent graphite is 894.87 $ t^(-1),and the recycling profit for regenerating graphite is approximately 7000 $ t^(-1). Given this, this work is anticipated to shed light on the closed-circuit recycling of spent graphite and offer significant strategies to repair graphite.展开更多
The existing recycling and regeneration technologies have problems,such as poor regeneration effect and low added value of products for lithium(Li)-ion battery cathode materials with a low state of health.In this work...The existing recycling and regeneration technologies have problems,such as poor regeneration effect and low added value of products for lithium(Li)-ion battery cathode materials with a low state of health.In this work,a targeted Li replenishment repair technology is proposed to improve the discharge-specific capacity and cycling stability of the repaired LiCoO_(2) cathode materials.Compared with the spent cathode material with>50%Li deficiency,the Li/Co molar ratio of the regenerated LiCoO_(2) cathode is>0.9,which completely removes the Co_(3)O_(4) impurity phase formed by the decomposition of LixCoO_(2) in the failed cathode material after repair.The repaired LiCoO_(2) cathode mater-ials exhibit better cycling stability,lower electrochemical impedance,and faster Li^(+)diffusion than the commercial materials at both 1 and 10 C.Meanwhile,Li_(1.05)CoO_(2) cathodes have higher Li replenishment efficiency and cycling stability.The energy consumption and greenhouse gas emissions of LiCoO_(2) cathodes produced by this repair method are significantly reduced compared to those using pyrometallurgical and hydro-metallurgical recycling processes.展开更多
Direct recycling has been regarded as one of the most promising approaches to dealing with the increasing amount of spent lithium‐ion batteries(LIBs).However,the current direct recycling method remains insufficient t...Direct recycling has been regarded as one of the most promising approaches to dealing with the increasing amount of spent lithium‐ion batteries(LIBs).However,the current direct recycling method remains insufficient to regenerate outdated cathodes to meet current industry needs as it only aims at recovering the structure and composition of degraded cathodes.Herein,a nickel(Ni)and manganese(Mn)co‐doping strategy has been adopted to enhance LiCoO_(2)(LCO)cathode for next‐generation high‐performance LIBs through a conventional hydrothermal treatment combined with short annealing approach.Unlike direct recycling methods that make no changes to the chemical composition of cathodes,the unique upcycling process fabricates a series of cathodes doped with different contents of Ni and Mn.The regenerated LCO cathode with 5%doping delivers excellent electrochemical performance with a discharge capacity of 160.23 mAh g^(−1) at 1.0 C and capacity retention of 91.2%after 100 cycles,considerably surpassing those of the pristine one(124.05 mAh g^(−1) and 89.05%).All results indicate the feasibility of such Ni–Mn co‐doping‐enabled upcycling on regenerating LCO cathodes.展开更多
Lithium,as the lightest and lowest potential metal,is an ideal "battery metal" and the core strategic metal of the new energy industry revolution.Recovering lithium from spent lithium batteries(LIBs)has beco...Lithium,as the lightest and lowest potential metal,is an ideal "battery metal" and the core strategic metal of the new energy industry revolution.Recovering lithium from spent lithium batteries(LIBs)has become one of the significant approaches to obtaining lithium resources.At present,the lithium extraction being generally placed at the last step of the spent LIBs recovery process has puzzles such as high acid consumption,low Li recovery purity and low recovery efficiency.Selective lithium extraction at the first step of the recovery process can effectively solve those puzzles.Since lithium leaching is a non-spontaneous reaction requiring additional energy to achieve,it is found that these methods can be divided into five ways according to the different types of energy driving the reaction occurring:(ⅰ)electric energy driving lithium extraction;(ⅱ) chemical energy driving lithium extraction;(ⅲ) mechanical energy driving lithium extraction;(ⅳ) thermal energy driving lithium extraction;(ⅴ) other energy driving lithium extraction.Through the analysis of the principle,reaction process and results of recovering lithium methods can provide a few directions for scholars’ subsequent research.It is necessary to speed up the exploration of the principle of these methods.It is expected that this study could provide a reference for the research on the selective lithium extraction.展开更多
It is challenging to efficiently and economically recycle many lithium-ion batteries(LIBs)because of the low valuation of commodity metals and materials,such as LiFePO_(4).There are millions of tons of spent LIBs wher...It is challenging to efficiently and economically recycle many lithium-ion batteries(LIBs)because of the low valuation of commodity metals and materials,such as LiFePO_(4).There are millions of tons of spent LIBs where the barrier to recycling is economical,and to make recycling more feasible,it is required that the value of the processed recycled material exceeds the value of raw commodity materials.The presented research illustrates improved profitability and economics for recycling spent LIBs by utilizing the surplus energy in lithiated graphite to drive the preparation of organolithiums to add value to the recycled lithium materials.This study methodology demonstrates that the surplus energy of lithiated graphite obtained from spent LIBs can be utilized to prepare high-value organolithiums,thereby significantly improving the economic profitability of LIB recycling.Organolithiums(R-O-Li and R-Li)were prepared using alkyl alcohol(R-OH)and alkyl bromide(R-Br)as substrates,where R includes varying hindered alkyl hydrocarbons.The organolithiums extracted from per kilogram of recycled LIBs can increase the economic value between$29.5 and$226.5 kg^(−1) cell.The value of the organolithiums is at least 5.4 times the total theoretical value of spent materials,improving the profitability of recycling LIBs over traditional pyrometallurgical($0.86 kg^(−1) cell),hydrometallurgical($1.00 kg^(−1) cell),and physical direct recycling methods($5.40 kg^(−1) cell).展开更多
The global importance of lithium-ion batteries(LIBs)has been increasingly underscored with the advancement of high-performance energy storage technologies.However,the end-of-life of these batteries poses significant c...The global importance of lithium-ion batteries(LIBs)has been increasingly underscored with the advancement of high-performance energy storage technologies.However,the end-of-life of these batteries poses significant challenges from environmental,economic,and resource management perspectives.This review paper focuses on the pyrometallurgy-based recycling process of lithium-ion batteries,exploring the fundamental understanding of this process and the importance of its optimization.Centering on the high energy consumption and emission gas issues of the pyrometallurgical recycling process,we systematically analyzed the capital-intensive nature of this process and the resulting technological characteristics.Furthermore,we conducted an in-depth discussion on the future research directions to overcome the existing technological barriers and limitations.This review will provide valuable insights for researchers and industry stakeholders in the battery recycling field.展开更多
The rapidly increasing production of lithium-ion batteries(LIBs)and their limited service time increases the number of spent LIBs,eventually causing serious environmental issues and resource wastage.From the perspecti...The rapidly increasing production of lithium-ion batteries(LIBs)and their limited service time increases the number of spent LIBs,eventually causing serious environmental issues and resource wastage.From the perspectives of clean production and the development of the LIB industry,the effective recovery and recycling of spent LIBs require urgent solutions.This study provides an overview of the current hydrometallurgical processes employed in the recycling of spent cathode materials,focusing on the leaching of valuable metals and their postprocessing.In particular,this research reviews the various leaching systems(inorganic acid,organic acid,and ammonia)and the separation of valuable metals,and then,recommendations for subsequent study are offered in an attempt to contribute to the development of highly efficient methods for recycling spent cathode materials.In addition,a range of existing technologies,such as solvent extraction,chemical precipitation,electrochemical deposition,and regeneration,for the postprocessing of leaching solutions are summarized.Finally,the promising technologies,existing challenges and suggestions with respect to the development of effective and environmentally friendly recycling methods for handling spent cathode materials are identified.展开更多
The recycling of cathode materials from spent lithium-ion battery has attracted extensive attention,but few research have focused on spent blended cathode materials.In reality,the blended materials of lithium iron pho...The recycling of cathode materials from spent lithium-ion battery has attracted extensive attention,but few research have focused on spent blended cathode materials.In reality,the blended materials of lithium iron phosphate and ternary are widely used in electric vehicles,so it is critical to design an effective recycling technique.In this study,an efficient method for recovering Li and Fe from the blended cathode materials of spent LiFePO_(4)and LiNi_xCo_yMn_(1-x-y)O_(2)batteries is proposed.First,87%A1 was removed by alkali leaching.Then,91.65%Li,72.08%Ni,64.6%Co and 71.66%Mn were further separated by selective leaching with H_(2)SO_(4)and H_(2)O_(2).Li,Ni,Co and Mn in solution were recovered in the form of Li_(2)CO_(3)and hydroxide respectively.Subsequently,98.38%Fe was leached from the residue by two stage process,and it is recovered as FePO_(4)·2H_(2)O with a purity of 99.5%by precipitation.Fe and P were present in FePO_(4)·2H_(2)O in amounts of 28.34%and 15.98%,respectively.Additionally,the drift and control of various components were discussed,and cost-benefit analysis was used to assess the feasibility of potential application.展开更多
Recycling graphite anode from spent lithium-ion batteries(SLIBs)is regarded as a crucial approach to promoting sustainable energy storage industry.However,the recycled graphite(RG)generally presents degraded structure...Recycling graphite anode from spent lithium-ion batteries(SLIBs)is regarded as a crucial approach to promoting sustainable energy storage industry.However,the recycled graphite(RG)generally presents degraded structure and performance.Herein,the residual fluoride self-activated effect is proposed for the upgraded utilization of RG.Simple and low-energy water immersion treatment not only widens the interlayer spacing,but also retains appropriate fluoride on the surface of RG.Theoretical analysis and experiments demonstrate that the residual fluoride can optimize Li~+migration and deposition kinetics,resulting in better Li~+intercalation/deintercalation in the interlayer and more stable Li metal plating/stripping on the surface of RG,As a result,the designed LFP||RG full cells achieve ultrahigh reversibility(~100%Coulombic efficiency),high capacity retention(67%after 200 cycles,0.85 N/P ratio),and commendable adaptability(stable cycling without short-circuiting,0.15 N/P ratio).The energy density is improved from 334 Wh kg^(-1)of 1.1 N/P ratio to 367 Wh kg^(-1)of 0.85 N/P ratio(total mass based on cathode and anode).The exploration of RG by residual fluoride self-activated effect achieves upgraded utilization beyond fresh commercial graphite and highlights a new strategy for efficient reuse of SLIBs.展开更多
Maximizing the sustainable recycling of spent lithium-ion batteries(LIBs)shows economic and environmental significance.This study recovered lithium cobaltate(LiCoO_(2),LCO)from spent LIBs cathode powder.The recovered ...Maximizing the sustainable recycling of spent lithium-ion batteries(LIBs)shows economic and environmental significance.This study recovered lithium cobaltate(LiCoO_(2),LCO)from spent LIBs cathode powder.The recovered LCO was then combined with NaHSO_(3)to remove refractory organic pollutants of carbamazepine(CBZ)in water.The degradation of CBZ reached 80.0%within 60 min,by 1O_(2),SO_(4),OH and O_(2)^(-)generated in the LCO/NaHSO_(3)reaction.The electron transfer between Co(III)and Co(II)was beneficial to the generation of free radicals.The LCO/NaHSO_(3)degraded CBZ effectively in both secondary outlet water and tap water.However,high concentrations of inorganic ions(Cl^(−),HCO_(3)^(-),HPO_(4)^(2-),SO_(2)−4,NO_(3)^(-))and natural organic matter(humic acid,HA)could inhibit the degradation of CBZ.After three cycles,the stability of the LCO/NaHSO_(3)system was demonstrated by the maintained high efficiency in the degradation of CBZ.The obtained data indicate that the LCO/NaHSO_(3)system holds great application potential in the field of advanced oxidation degradation of pollutants.展开更多
The reductant is a critical factor in the hydrometallurgical recycling of valuable metals from spent lithium-ion batteries(LIBs).There is limited information regarding the use of SnCl_(2) as a reductant with organic a...The reductant is a critical factor in the hydrometallurgical recycling of valuable metals from spent lithium-ion batteries(LIBs).There is limited information regarding the use of SnCl_(2) as a reductant with organic acid(maleic acid)for recovering valuable metals from spent Li-CoO_(2) material.In this study,the leaching efficiencies of Li and Co with 1 mol·L^(−1) of maleic acid and 0.3 mol·L^(−1) of SnCl_(2) were found to be 98.67%and 97.5%,respectively,at 60°C and a reaction time of 40 min.We investigated the kinetics and thermodynamics of the leaching process in this study to better understand the mechanism of the leaching process.Based on a comparison with H_(2)O_(2) with respect to leaching efficiency,the optimal leaching parameters,and the activation energy,we determined that it is feasible to replace H_(2)O_(2) with SnCl_(2) as a leaching reductant in the leaching process.In addition,when SnCl_(2) is used in the acid-leaching process,Sn residue in the leachate may have a positive effect on the re-synthesis of nickel-rich cathode materials.Therefore,the results of this study provide a potential direction for the selection of reductants in the hydrometallurgical recovery of valuable metals from spent LIBs.展开更多
The number of lithium-ion batteries(LIBs)is steadily increasing in order to meet the ever-growing demand for sustainable energy and a high quality of life for humankind.At the same time,the resulting large number of L...The number of lithium-ion batteries(LIBs)is steadily increasing in order to meet the ever-growing demand for sustainable energy and a high quality of life for humankind.At the same time,the resulting large number of LIB waste certainly poses safety hazards if it is not properly disposed of and will seriously harm the environment due to its inherent toxicity due to the use of toxic substances.Moreover,the consumption of many scarce precious metal resources is behind the mass production of batteries.In the light of severe environmental,resources,safety and recycling problems,recycling spent LIBs have become an essential urgently needed action to achieve sustainable social development.This review therefore critically analyses the value and the need for recycling of spent LIBs from a variety of resources and the environment.A range of existing technologies for recycling and reusing spent LIBs,such as pretreatment,pyrometallurgy,hydrometallurgy,and direct recycled methods,is subsequently summarized exclusively.In addition,the benefits and problems of the methods described above are analyzed in detail.It also introduces recycling progress of other LIB components,such as anodes,separators,and electrolytes,as well as the high-value cathode.Finally,the prospects for recycling LIBs are addressed in four ways(government,users,battery manufacturers,and recyclers).This review should contribute to the development of the recycling of used LIBs,particularly in support of industrialization and recycling processes.展开更多
Along with the extensive application of energy storage devices,the spent lithium-ion batteries(LIBs)are unquestionably classified into the secondary resources due to its high content of several valuable metals.However...Along with the extensive application of energy storage devices,the spent lithium-ion batteries(LIBs)are unquestionably classified into the secondary resources due to its high content of several valuable metals.However,current recycling methods have the main drawback to their tedious process,especially the purification and separation process.Herein,we propose a simplified process to recycle both cathode(LiCoO_(2))and anode(graphite)in the spent LIBs and regenerate newly high-performance anode material,CoO/CoFe2O4/expanded graphite(EG).This process not only has the advantages of succinct procedure and easy control of reaction conditions,but also effectively separates and recycles lithium from transition metals.The 98.43%of lithium is recovered from leachate when the solid product CoO/CoFe2O4/EG is synthesized as anode material for LIBs.And the product exhibits improved cyclic stability(890 mAh g^(-1) at 1 A g^(-1) after 700 cycles)and superior rate capability(208 mAh g^(-1) at 5 A g^(-1)).The merit of this delicate recycling design can be summarized as three aspects:the utilization of Fe impurity in waste LiCoO_(2),the transformation of waste graphite to EG,and the regeneration of anode material.This approach properly recycles the valuable components of spent LIBs,which introduces an insight into the future recycling.展开更多
The effective and low-temperature extraction of lithium from the pyrometallurgical slag of spent lithium-ion batteries(LIBs)remains a great challenge.Herein,potassium carbonate/sodium carbonate(K_(2)CO_(3)/Na_(2)CO_(3...The effective and low-temperature extraction of lithium from the pyrometallurgical slag of spent lithium-ion batteries(LIBs)remains a great challenge.Herein,potassium carbonate/sodium carbonate(K_(2)CO_(3)/Na_(2)CO_(3)),which could form a eutectic molten salt system at 720℃,was used as a roasting agent to extract lithium from pyrometallurgical slag.Lithium was successfully extracted from the slag by K_(2)CO_(3)/Na_(2)CO_(3) roasting followed by water leaching.Theoretical calculation results indicate that the lengths of Li-O bonds increase after K^(+)/Na^(+)adsorption,resulting in the easy release of Li^(+)from the LiAlSi_(2)O_(6) lattice after roasting with K_(2)CO_(3)/Na_(2)CO_(3).Thermogravimetry-differential scanning calorimetry results indicate that the eutectic phenomenon of K_(2)CO_(3) and Na_(2)CO_(3) could be observed at 720℃ and that the reaction of the slag and eutectic molten salts occurs at temperatures above 720℃.X-ray diffraction results suggest that Li^(+)in the slag is exchanged by K^(+)in K_(2)CO_(3) with the concurrent formation of KAlSiO_(4),while Na_(2)CO_(3) mainly functions as a fluxing agent.The lithium extraction efficiency can reach 93.87%under the optimal conditions of a roasting temperature of 740℃,roasting time of 30 min,leaching temperature of 50℃,leaching time of 40 min,and water/roasted sample mass ratio of 10:1.This work provides a new system for extracting lithium from the pyrometallurgical slag of spent LIBs.展开更多
基金financially supported by the National Natural Science Foundation of China(No.51804084)the Natural Science Foundation of Guangxi Province,China(No.2021GXNSFAA220096)the Science and Technology Major Project of Guangxi Province,China(No.AA17204100)。
文摘To effectively separate and recover Co(Ⅱ) from the leachate of spent lithium-ion battery cathodes,we investigated solvent extraction with quaternary ammonium salt N263 in the sodium nitrite system.NO_(2)^(-)combines with Co(Ⅱ) to form an anion [Co(NO_(2))_(3)]^(-),and it is then extracted by N263.The extraction of Co(Ⅱ) is related to the concentration of NO_(2)^(-).The extraction efficiency of Co(Ⅱ) reaches the maximum of99.16%,while the extraction efficiencies of Ni(Ⅱ),Mn(Ⅱ),and Li(Ⅰ) are 9.27%-9.80% under the following conditions:30vol% of N263 and15vol% of iso-propyl alcohol in sulfonated kerosene,the volume ratio of the aqueous-to-organic phase is 2:1,the extraction time is 30 min,and1 M sodium nitrite in 0.1 MHNO_(3).The theoretical stages require for the Co(Ⅱ) extraction are performed in the McCabe–Thiele diagram,and the extraction efficiency of Co(Ⅱ) reaches more than 99.00% after three-stage counter-current extraction with Co(Ⅱ) concentration of 2544mg/L.When the HCl concentration is 1.5 M,the volume ratio of the aqueous-to-organic phase is 1:1,the back-extraction efficiency of Co(Ⅱ)achieves 91.41%.After five extraction and back-extraction cycles,the Co(Ⅱ) extraction efficiency can still reach 93.89%.The Co(Ⅱ) extraction efficiency in the actual leaching solution reaches 100%.
基金supported by the National Key R&D Program of China(2021YFB2400300)Key R&D Program of Hubei Province of China(2020BAB088)+2 种基金National Natural Science Foundation of China(52002277)the Fundamental Research Funds for the Central Universities(2021GCRC001)Guangdong Basic and Applied Basic Reuter Foundation(2021A1515011748).
文摘The recycling of graphite from spent lithium-ion batteries(LIBs)is overlooked due to its relatively low added value and the lack of efficient recovering methods.To reuse the spent graphite anodes,we need to eliminate their useless components(mainly the degraded solid electrolyte interphase,SEI)and reconstruct their damaged structure.Herein,a facile and efficient strategy is proposed to recycle the spent graphite on the basis of the careful investigation of the composition of the cycled graphite anodes and the rational design of the regeneration processes.The regenerated graphite,which is revitalized by calcination treatment and acid leaching,delivers superb rate performance and a high specific capacity of 370 mAh g^(-1)(~99% of its theoretical capacity)after 100 cycles at 0.1 C,superior to the commercial graphite anodes.The improved electrochemical performance could be attributed to unchoked Li^(+) transport channels and enhanced charge transfer reaction due to the effective destruction of the degraded SEI and the full recovery of the damaged structure of the spent graphite.This work clarifies that the electrochemical performance of the regenerated graphite could be deteriorated by even a trace amount of the residual“impurity”and provides a facile method for the efficient regeneration of graphite anodes.
基金financially supported by the National Natural Science Foundation of China(NSFC)(52274295)the Natural Science Foundation of Hebei Province(E2020501001,E2021501029,A2021501007,E2022501028,E2022501029)+5 种基金the Natural Science Foundation-Steel,the Iron Foundation of Hebei Province(No.E2022501030)the Performance subsidy fund for Key Laboratory of Dielectric and Electrolyte Functional Material Hebei Province(22567627H)the Science and Technology Project of Hebei Education Department(ZD2022158)the Central Guided Local Science and Technology Development Fund Project of Hebei province(226Z4401G)the China Scholarship Council(No.202206080061,202206050119)the 2023 Hebei Provincial Postgraduate Student Innovation Ability training funding project(CXZZSS2023195)。
文摘The recycling and reutilization of spent lithium-ion batteries(LIBs)have become an important measure to alleviate problems like resource scarcity and environmental pollution.Although some progress has been made,battery recycling technology still faces challenges in terms of efficiency,effectiveness and environmental sustainability.This review aims to systematically review and analyze the current status of spent LIB recycling,and conduct a detailed comparison and evaluation of different recycling processes.In addition,this review introduces emerging recycling techniques,including deep eutectic solvents,molten salt roasting,and direct regeneration,with the intent of enhancing recycling efficiency and diminishing environmental repercussions.Furthermore,to increase the added value of recycled materials,this review proposes the concept of upgrading recycled materials into high value-added functional materials,such as catalysts,adsorbents,and graphene.Through life cycle assessment,the paper also explores the economic and environmental impacts of current battery recycling and highlights the importance that future recycling technologies should achieve a balance between recycling efficiency,economics and environmental benefits.Finally,this review outlines the opportunities and challenges of recycling key materials for next-generation batteries,and proposes relevant policy recommendations to promote the green and sustainable development of batteries,circular economy,and ecological civilization.
基金the National Natural Science Foundation of China(No.52173246)the Science and Technology Planning Project of Guangzhou City,China(No.2023B03J1278)。
文摘The worldwide proliferation of portable electronics has resulted in a dramatic increase in the number of spent lithium-ion batteries(LIBs).However,traditional recycling methods still have limitations because of such huge amounts of spent LIBs.Therefore,we proposed an ecofriendly and sustainable double recycling strategy to concurrently reuse the cathode(LiCoO_(2))and anode(graphite)materials of spent LIBs and recycled LiCoPO_(4)/graphite(RLCPG)in Li^(+)/PF^(-)_(6) co-de/intercalation dual-ion batteries.The recycle-derived dualion batteries of Li/RLCPG show impressive electrochemical performance,with an appropriate discharge capacity of 86.2 mAh·g^(-1) at25 mA·g^(-1) and 69%capacity retention after 400 cycles.Dual recycling of the cathode and anode from spent LIBs avoids wastage of resources and yields cathode materials with excellent performance,thereby offering an ecofriendly and sustainable way to design novel secondary batteries.
基金supported by Key R&D Program of Zhejiang Province,China (No.2022C03061)the National Natural Science Foundation of China (No.52074204)the Fundamental Research Funds for the Central Universities (No.2023-vb-032).
文摘The proper recycling of spent lithium-ion batteries(LIBs)can promote the recovery and utilization of valuable resources,while also negative environmental effects resulting from the presence of toxic and hazardous substances.In this study,a new environmentally friendly hydro-metallurgical process was proposed for leaching lithium(Li),nickel(Ni),cobalt(Co),and manganese(Mn)from spent LIBs using sulfuric acid with citric acid as a reductant.The effects of the concentration of sulfuric acid,the leaching temperature,the leaching time,the solid-liquid ratio,and the reducing agent dosage on the leaching behavior of the above elements were investigated.Key parameters were optimized using response surface methodology(RSM)to maximize the recovery of metals from spent LIBs.The maxim-um recovery efficiencies of Li,Ni,Co,and Mn can reach 99.08%,98.76%,98.33%,and 97.63%.under the optimized conditions(the sulfuric acid concentration was 1.16 mol/L,the citric acid dosage was 15wt%,the solid-liquid ratio was 40 g/L,and the temperature was 83℃ for 120 min),respectively.It was found that in the collaborative leaching process of sulfuric acid and citric acid,the citric acid initially provided strong reducing CO_(2)^(-),and the transition metal ions in the high state underwent a reduction reaction to produce transition metal ions in the low state.Additionally,citric acid can also act as a proton donor and chelate with lower-priced transition metal ions,thus speeding up the dissolution process.
基金financially supported by the Young Scientists Fund of the National Natural Science Foundation of China(Nos.52104395 and 52304365)the Science and Technology Planning Project of Guangzhou,China(Nos.202102021080 and 2024A04J10006)+1 种基金the National Key R&D Program of China(No.2021YFC2902605)the Natural Science Foundation of Guangdong Province,China(Nos.2023A1515030145 and 2023A1515011847)。
文摘Traditional hydrometallurgical methods for recovering spent lithium-ion batteries(LIBs)involve acid leaching to simultaneously extract all valuable metals into the leachate.These methods usually are followed by a series of separation steps such as precipitation,extraction,and stripping to separate the individual valuable metals.In this study,we present a process for selectively leaching lithium through the synergistic effect of sulfuric and oxalic acids.Under optimal leaching conditions(leaching time of 1.5 h,leaching temperature of 70°C,liquid-solid ratio of 4 mL/g,oxalic acid ratio of 1.3,and sulfuric acid ratio of 1.3),the lithium leaching efficiency reached89.6%,and the leaching efficiencies of Ni,Co,and Mn were 12.8%,6.5%,and 21.7%.X-ray diffraction(XRD)and inductively coupled plasma optical emission spectrometer(ICP-OES)analyses showed that most of the Ni,Co,and Mn in the raw material remained as solid residue oxides and oxalates.This study offers a new approach to enriching the relevant theory for selectively recovering lithium from spent LIBs.
基金financially supported by the National Key Research and Development Program(2019YFC1907801,2019YFC1907804)the National Natural Science Foundation of China(51904340)the Natural Science Foundation of Hunan(2020JJ4733,2021JJ20066)。
文摘Graphite, as a strategic mineral resource, the recycling from spent lithium-ion batteries(LIBs) has attracted considerable attention for meeting considerable economic value. However, closed-circuit recycling still suffers from the lack of effective repair methods. Considering the existing defects, a series of Cchain length carbons have been successfully introduced to repair spent graphite. Obviously, with the evolution of carbon resources, the thickness and pores of the coating layer were tailored with the functional groups. Benefitting from the increased active sites and created fold structure, their coulombic efficiency is obviously restored from 14% to 86.89%, while the stable capacity is kept at approximately 384.9 mAh gafter 100 cycles. Moreover, their excellent rate properties are kept about approximately 200 mAh gat2 C, meeting the standard of commercial materials. Supported by the detailed kinetic behaviors, the enhanced rate is mainly dominated by pseudocapacitive behaviors, accompanied by deepening redox reactions. Meanwhile, the cost of the proposed approach for recycling spent graphite is 894.87 $ t^(-1),and the recycling profit for regenerating graphite is approximately 7000 $ t^(-1). Given this, this work is anticipated to shed light on the closed-circuit recycling of spent graphite and offer significant strategies to repair graphite.
基金supported by the National Natural Science Foundation of China (Nos. 51972030 and 51772030)the S&T Major Project of Inner Mongolia Autonomous Region in China (No. 2020ZD0018)+1 种基金the Beijing Outstanding Young Scientists Program (No. BJJWZYJH01201910007023)the Guangdong Key Laboratory of Battery Safety (No. 2019B121203008)
文摘The existing recycling and regeneration technologies have problems,such as poor regeneration effect and low added value of products for lithium(Li)-ion battery cathode materials with a low state of health.In this work,a targeted Li replenishment repair technology is proposed to improve the discharge-specific capacity and cycling stability of the repaired LiCoO_(2) cathode materials.Compared with the spent cathode material with>50%Li deficiency,the Li/Co molar ratio of the regenerated LiCoO_(2) cathode is>0.9,which completely removes the Co_(3)O_(4) impurity phase formed by the decomposition of LixCoO_(2) in the failed cathode material after repair.The repaired LiCoO_(2) cathode mater-ials exhibit better cycling stability,lower electrochemical impedance,and faster Li^(+)diffusion than the commercial materials at both 1 and 10 C.Meanwhile,Li_(1.05)CoO_(2) cathodes have higher Li replenishment efficiency and cycling stability.The energy consumption and greenhouse gas emissions of LiCoO_(2) cathodes produced by this repair method are significantly reduced compared to those using pyrometallurgical and hydro-metallurgical recycling processes.
基金support of NanoFAB in Electron Microscopy and FIB sample preparation at the University of Alberta in Canadasupported by the Natural Sciences and Engineering Research Council of Canada(NSERC)+3 种基金through the Discovery Grant Program(RGPIN-2018-06725)the Discovery Accelerator Supplement Grant program(RGPAS-2018-522651)by the New Frontiers in Research Fund-Exploration program(NFRFE-2019-00488)financial support from the University of Alberta and Future Energy Systems(FES-T06-Q03).
文摘Direct recycling has been regarded as one of the most promising approaches to dealing with the increasing amount of spent lithium‐ion batteries(LIBs).However,the current direct recycling method remains insufficient to regenerate outdated cathodes to meet current industry needs as it only aims at recovering the structure and composition of degraded cathodes.Herein,a nickel(Ni)and manganese(Mn)co‐doping strategy has been adopted to enhance LiCoO_(2)(LCO)cathode for next‐generation high‐performance LIBs through a conventional hydrothermal treatment combined with short annealing approach.Unlike direct recycling methods that make no changes to the chemical composition of cathodes,the unique upcycling process fabricates a series of cathodes doped with different contents of Ni and Mn.The regenerated LCO cathode with 5%doping delivers excellent electrochemical performance with a discharge capacity of 160.23 mAh g^(−1) at 1.0 C and capacity retention of 91.2%after 100 cycles,considerably surpassing those of the pristine one(124.05 mAh g^(−1) and 89.05%).All results indicate the feasibility of such Ni–Mn co‐doping‐enabled upcycling on regenerating LCO cathodes.
基金financially supported by the National Key Research and Development Program of China(2019YFC1907900)the Key Project of Research and Development Plan of Jiangxi Province(20201BBE51007)the National Science Fund for Distinguished Young Scholars(52125002)。
文摘Lithium,as the lightest and lowest potential metal,is an ideal "battery metal" and the core strategic metal of the new energy industry revolution.Recovering lithium from spent lithium batteries(LIBs)has become one of the significant approaches to obtaining lithium resources.At present,the lithium extraction being generally placed at the last step of the spent LIBs recovery process has puzzles such as high acid consumption,low Li recovery purity and low recovery efficiency.Selective lithium extraction at the first step of the recovery process can effectively solve those puzzles.Since lithium leaching is a non-spontaneous reaction requiring additional energy to achieve,it is found that these methods can be divided into five ways according to the different types of energy driving the reaction occurring:(ⅰ)electric energy driving lithium extraction;(ⅱ) chemical energy driving lithium extraction;(ⅲ) mechanical energy driving lithium extraction;(ⅳ) thermal energy driving lithium extraction;(ⅴ) other energy driving lithium extraction.Through the analysis of the principle,reaction process and results of recovering lithium methods can provide a few directions for scholars’ subsequent research.It is necessary to speed up the exploration of the principle of these methods.It is expected that this study could provide a reference for the research on the selective lithium extraction.
基金National Natural Science Foundation of China,Grant/Award Number:51232005Key-Area Research and Development Program of Guangdong Province,Grant/Award Number:2020B090919003+1 种基金Joint Fund of the National Natural Science Foundation of China,Grant/Award Number:U1401243Shenzhen Technical Plan Project,Grant/Award Number:CYJ20170412170911187。
文摘It is challenging to efficiently and economically recycle many lithium-ion batteries(LIBs)because of the low valuation of commodity metals and materials,such as LiFePO_(4).There are millions of tons of spent LIBs where the barrier to recycling is economical,and to make recycling more feasible,it is required that the value of the processed recycled material exceeds the value of raw commodity materials.The presented research illustrates improved profitability and economics for recycling spent LIBs by utilizing the surplus energy in lithiated graphite to drive the preparation of organolithiums to add value to the recycled lithium materials.This study methodology demonstrates that the surplus energy of lithiated graphite obtained from spent LIBs can be utilized to prepare high-value organolithiums,thereby significantly improving the economic profitability of LIB recycling.Organolithiums(R-O-Li and R-Li)were prepared using alkyl alcohol(R-OH)and alkyl bromide(R-Br)as substrates,where R includes varying hindered alkyl hydrocarbons.The organolithiums extracted from per kilogram of recycled LIBs can increase the economic value between$29.5 and$226.5 kg^(−1) cell.The value of the organolithiums is at least 5.4 times the total theoretical value of spent materials,improving the profitability of recycling LIBs over traditional pyrometallurgical($0.86 kg^(−1) cell),hydrometallurgical($1.00 kg^(−1) cell),and physical direct recycling methods($5.40 kg^(−1) cell).
基金the Technology Innovation Program(or Industrial Strategic Technology Development Program)and the Ministry of Trade,Industry&Energy(MOTIE)of the Republic of Korea(No.20022950)。
文摘The global importance of lithium-ion batteries(LIBs)has been increasingly underscored with the advancement of high-performance energy storage technologies.However,the end-of-life of these batteries poses significant challenges from environmental,economic,and resource management perspectives.This review paper focuses on the pyrometallurgy-based recycling process of lithium-ion batteries,exploring the fundamental understanding of this process and the importance of its optimization.Centering on the high energy consumption and emission gas issues of the pyrometallurgical recycling process,we systematically analyzed the capital-intensive nature of this process and the resulting technological characteristics.Furthermore,we conducted an in-depth discussion on the future research directions to overcome the existing technological barriers and limitations.This review will provide valuable insights for researchers and industry stakeholders in the battery recycling field.
基金financially supported by the National Natural Science Foundation of China(Nos.51774127 and 52074353)the Scientific Research Project of Hunan Education Department,China(No.20K044)Hunan Provincial Innovation Foundation For Postgraduate(No.CX20231105)。
文摘The rapidly increasing production of lithium-ion batteries(LIBs)and their limited service time increases the number of spent LIBs,eventually causing serious environmental issues and resource wastage.From the perspectives of clean production and the development of the LIB industry,the effective recovery and recycling of spent LIBs require urgent solutions.This study provides an overview of the current hydrometallurgical processes employed in the recycling of spent cathode materials,focusing on the leaching of valuable metals and their postprocessing.In particular,this research reviews the various leaching systems(inorganic acid,organic acid,and ammonia)and the separation of valuable metals,and then,recommendations for subsequent study are offered in an attempt to contribute to the development of highly efficient methods for recycling spent cathode materials.In addition,a range of existing technologies,such as solvent extraction,chemical precipitation,electrochemical deposition,and regeneration,for the postprocessing of leaching solutions are summarized.Finally,the promising technologies,existing challenges and suggestions with respect to the development of effective and environmentally friendly recycling methods for handling spent cathode materials are identified.
基金financially supported by the National Key Research and Development Program(Nos.2019YFC1907801,2019YFC1907803 and 2019YFC1907804)the Natural Science Foundation of Hunan(Nos.2021JJ2020066 and 2020JJ4733)+1 种基金the National Natural Science Foundation of China(No.51904340)the Central South University Innovation-Driven Research Program(No.2023CXQD009)。
文摘The recycling of cathode materials from spent lithium-ion battery has attracted extensive attention,but few research have focused on spent blended cathode materials.In reality,the blended materials of lithium iron phosphate and ternary are widely used in electric vehicles,so it is critical to design an effective recycling technique.In this study,an efficient method for recovering Li and Fe from the blended cathode materials of spent LiFePO_(4)and LiNi_xCo_yMn_(1-x-y)O_(2)batteries is proposed.First,87%A1 was removed by alkali leaching.Then,91.65%Li,72.08%Ni,64.6%Co and 71.66%Mn were further separated by selective leaching with H_(2)SO_(4)and H_(2)O_(2).Li,Ni,Co and Mn in solution were recovered in the form of Li_(2)CO_(3)and hydroxide respectively.Subsequently,98.38%Fe was leached from the residue by two stage process,and it is recovered as FePO_(4)·2H_(2)O with a purity of 99.5%by precipitation.Fe and P were present in FePO_(4)·2H_(2)O in amounts of 28.34%and 15.98%,respectively.Additionally,the drift and control of various components were discussed,and cost-benefit analysis was used to assess the feasibility of potential application.
基金the National Natural Science Foundation of China(21975212)the Industry Leading Key Projects of Fujian Province(2022H0057)the High-level talent start-up Foundation of Xiamen Institute of Technology for financial support。
文摘Recycling graphite anode from spent lithium-ion batteries(SLIBs)is regarded as a crucial approach to promoting sustainable energy storage industry.However,the recycled graphite(RG)generally presents degraded structure and performance.Herein,the residual fluoride self-activated effect is proposed for the upgraded utilization of RG.Simple and low-energy water immersion treatment not only widens the interlayer spacing,but also retains appropriate fluoride on the surface of RG.Theoretical analysis and experiments demonstrate that the residual fluoride can optimize Li~+migration and deposition kinetics,resulting in better Li~+intercalation/deintercalation in the interlayer and more stable Li metal plating/stripping on the surface of RG,As a result,the designed LFP||RG full cells achieve ultrahigh reversibility(~100%Coulombic efficiency),high capacity retention(67%after 200 cycles,0.85 N/P ratio),and commendable adaptability(stable cycling without short-circuiting,0.15 N/P ratio).The energy density is improved from 334 Wh kg^(-1)of 1.1 N/P ratio to 367 Wh kg^(-1)of 0.85 N/P ratio(total mass based on cathode and anode).The exploration of RG by residual fluoride self-activated effect achieves upgraded utilization beyond fresh commercial graphite and highlights a new strategy for efficient reuse of SLIBs.
基金the National Natural Science Foundation of China(Nos.42067057,42367060)the Science and Technology Plan Project of Yunnan Provincial Science and Technology Department,China(No.202101AT070087)the High-level Scientific Research Foundation for Talent Introduction of Kunming University of Science and Technology,China(No.10978172).
文摘Maximizing the sustainable recycling of spent lithium-ion batteries(LIBs)shows economic and environmental significance.This study recovered lithium cobaltate(LiCoO_(2),LCO)from spent LIBs cathode powder.The recovered LCO was then combined with NaHSO_(3)to remove refractory organic pollutants of carbamazepine(CBZ)in water.The degradation of CBZ reached 80.0%within 60 min,by 1O_(2),SO_(4),OH and O_(2)^(-)generated in the LCO/NaHSO_(3)reaction.The electron transfer between Co(III)and Co(II)was beneficial to the generation of free radicals.The LCO/NaHSO_(3)degraded CBZ effectively in both secondary outlet water and tap water.However,high concentrations of inorganic ions(Cl^(−),HCO_(3)^(-),HPO_(4)^(2-),SO_(2)−4,NO_(3)^(-))and natural organic matter(humic acid,HA)could inhibit the degradation of CBZ.After three cycles,the stability of the LCO/NaHSO_(3)system was demonstrated by the maintained high efficiency in the degradation of CBZ.The obtained data indicate that the LCO/NaHSO_(3)system holds great application potential in the field of advanced oxidation degradation of pollutants.
基金This work was financially supported by the National Key R&D Program of China(No.2016YFB0100301)the National Natural Science Foundation of China(Nos.21875022 and U1664255).
文摘The reductant is a critical factor in the hydrometallurgical recycling of valuable metals from spent lithium-ion batteries(LIBs).There is limited information regarding the use of SnCl_(2) as a reductant with organic acid(maleic acid)for recovering valuable metals from spent Li-CoO_(2) material.In this study,the leaching efficiencies of Li and Co with 1 mol·L^(−1) of maleic acid and 0.3 mol·L^(−1) of SnCl_(2) were found to be 98.67%and 97.5%,respectively,at 60°C and a reaction time of 40 min.We investigated the kinetics and thermodynamics of the leaching process in this study to better understand the mechanism of the leaching process.Based on a comparison with H_(2)O_(2) with respect to leaching efficiency,the optimal leaching parameters,and the activation energy,we determined that it is feasible to replace H_(2)O_(2) with SnCl_(2) as a leaching reductant in the leaching process.In addition,when SnCl_(2) is used in the acid-leaching process,Sn residue in the leachate may have a positive effect on the re-synthesis of nickel-rich cathode materials.Therefore,the results of this study provide a potential direction for the selection of reductants in the hydrometallurgical recovery of valuable metals from spent LIBs.
基金financially supported by the National Natural Science Foundation of China(No.52173246)the 111 Project(B13013).
文摘The number of lithium-ion batteries(LIBs)is steadily increasing in order to meet the ever-growing demand for sustainable energy and a high quality of life for humankind.At the same time,the resulting large number of LIB waste certainly poses safety hazards if it is not properly disposed of and will seriously harm the environment due to its inherent toxicity due to the use of toxic substances.Moreover,the consumption of many scarce precious metal resources is behind the mass production of batteries.In the light of severe environmental,resources,safety and recycling problems,recycling spent LIBs have become an essential urgently needed action to achieve sustainable social development.This review therefore critically analyses the value and the need for recycling of spent LIBs from a variety of resources and the environment.A range of existing technologies for recycling and reusing spent LIBs,such as pretreatment,pyrometallurgy,hydrometallurgy,and direct recycled methods,is subsequently summarized exclusively.In addition,the benefits and problems of the methods described above are analyzed in detail.It also introduces recycling progress of other LIB components,such as anodes,separators,and electrolytes,as well as the high-value cathode.Finally,the prospects for recycling LIBs are addressed in four ways(government,users,battery manufacturers,and recyclers).This review should contribute to the development of the recycling of used LIBs,particularly in support of industrialization and recycling processes.
基金This work was supported by National Natural Science Foundation of China(51902347,51822812,51772334,51778627).
文摘Along with the extensive application of energy storage devices,the spent lithium-ion batteries(LIBs)are unquestionably classified into the secondary resources due to its high content of several valuable metals.However,current recycling methods have the main drawback to their tedious process,especially the purification and separation process.Herein,we propose a simplified process to recycle both cathode(LiCoO_(2))and anode(graphite)in the spent LIBs and regenerate newly high-performance anode material,CoO/CoFe2O4/expanded graphite(EG).This process not only has the advantages of succinct procedure and easy control of reaction conditions,but also effectively separates and recycles lithium from transition metals.The 98.43%of lithium is recovered from leachate when the solid product CoO/CoFe2O4/EG is synthesized as anode material for LIBs.And the product exhibits improved cyclic stability(890 mAh g^(-1) at 1 A g^(-1) after 700 cycles)and superior rate capability(208 mAh g^(-1) at 5 A g^(-1)).The merit of this delicate recycling design can be summarized as three aspects:the utilization of Fe impurity in waste LiCoO_(2),the transformation of waste graphite to EG,and the regeneration of anode material.This approach properly recycles the valuable components of spent LIBs,which introduces an insight into the future recycling.
基金financially supported by the National Natural Science Foundation of China(No.21276022)。
文摘The effective and low-temperature extraction of lithium from the pyrometallurgical slag of spent lithium-ion batteries(LIBs)remains a great challenge.Herein,potassium carbonate/sodium carbonate(K_(2)CO_(3)/Na_(2)CO_(3)),which could form a eutectic molten salt system at 720℃,was used as a roasting agent to extract lithium from pyrometallurgical slag.Lithium was successfully extracted from the slag by K_(2)CO_(3)/Na_(2)CO_(3) roasting followed by water leaching.Theoretical calculation results indicate that the lengths of Li-O bonds increase after K^(+)/Na^(+)adsorption,resulting in the easy release of Li^(+)from the LiAlSi_(2)O_(6) lattice after roasting with K_(2)CO_(3)/Na_(2)CO_(3).Thermogravimetry-differential scanning calorimetry results indicate that the eutectic phenomenon of K_(2)CO_(3) and Na_(2)CO_(3) could be observed at 720℃ and that the reaction of the slag and eutectic molten salts occurs at temperatures above 720℃.X-ray diffraction results suggest that Li^(+)in the slag is exchanged by K^(+)in K_(2)CO_(3) with the concurrent formation of KAlSiO_(4),while Na_(2)CO_(3) mainly functions as a fluxing agent.The lithium extraction efficiency can reach 93.87%under the optimal conditions of a roasting temperature of 740℃,roasting time of 30 min,leaching temperature of 50℃,leaching time of 40 min,and water/roasted sample mass ratio of 10:1.This work provides a new system for extracting lithium from the pyrometallurgical slag of spent LIBs.