To clarify phase transformation evolution of Nb-doped Ni-Mn-Ga bulk alloys after aging and ball milling, the microstructure and phase transformation of the aged and ball-milled dual-phase Nb-doped Ni-Mn-Ga alloys were...To clarify phase transformation evolution of Nb-doped Ni-Mn-Ga bulk alloys after aging and ball milling, the microstructure and phase transformation of the aged and ball-milled dual-phase Nb-doped Ni-Mn-Ga alloys were investigated by SEM, EDS, XRD, DSC and susceptibility measurements. The as-cast alloys were mainly composed of the second phase with layer-shape and presented a reduced martensitic transformation with increasing the second phase content. The second phase transformed from layer-shape to dense bar-shape and the martensitic transformation was enhanced after being quenched at 1173 K. After aging at 673 and 873 K, the 3% Nb alloy with less second phase exhibited a single-step phase transformation, whereas the 6% Nb and 9% Nb alloys with more second phase exhibited a two-step martensitic transformation and Curie transition. The martensitic transformation and Curie transition of the as-milled dual-phase particles disappeared and were retrieved after annealing at 1073 K due to the recovery of high ordered structure of the matrix.展开更多
Porous glass was prepared by thermally treating sodium borosilicate glass for different time, the effect of thermal treatment on pore size distribution was discussed and the pore size of the prepared porous glass was ...Porous glass was prepared by thermally treating sodium borosilicate glass for different time, the effect of thermal treatment on pore size distribution was discussed and the pore size of the prepared porous glass was measured by scanning electron microscopy （SEM） and differential thermal analysis （DTA）. The results show that the optimum porous glass with an average diameter of 80 nm can be prepared by thermal treatment at 600℃ for 12 h and then acid treatment for 12 h in 2 mol·L^-1 hydrochloric acid solution.展开更多
Nanostructured zirconia top coat was deposited by air plasma spray and NiCoCrAlTaY bond coat was deposited on Ni substrate by low pressure plasma spray.Nanostructured and conventional thermal barrier coatings were hea...Nanostructured zirconia top coat was deposited by air plasma spray and NiCoCrAlTaY bond coat was deposited on Ni substrate by low pressure plasma spray.Nanostructured and conventional thermal barrier coatings were heat-treated at temperature varying from 1050 to 1 250oC for 2-20 h.The results show that obvious grain growth was found in both nanostructured and conventional thermal barrier coatings(TBCs)after high temperature heat treatment.Monoclinic/tetragonal phases were transformed into cubic phase in the agglomerated nano-powder after calcination.The cubic phase content increased with increasing calcination temperature.Calcination of the powder made the yttria distributed on the surface of the nanocrystalline particles dissolve in zirconia when grains grew.Different from the phase constituent of the as-sprayed conventional TBC which consisted of diffusionlesstransformed tetragonal,the as-sprayed nanostructured TBC consisted of cubic phase.展开更多
Heat-resistant aluminum alloys are widely used in aerospace and automotive fields for manufacturing hot components due to their advantages in lightweight design and energy conservation.However,the high-temperature str...Heat-resistant aluminum alloys are widely used in aerospace and automotive fields for manufacturing hot components due to their advantages in lightweight design and energy conservation.However,the high-temperature strength of existing cast aluminum alloys is always limited to about 100 MPa at 350℃due to coarsening and transformation of strengthening phases.Here,we reveal that the yield strength and ultimate tensile strength of the T6 state Al-8.4Cu-2.3Ce-1.0Mn-0.5Ni-0.2Zr alloy at 400◦C increase by 34%and 44%after re-aging at 300℃for 100 h,and its thermal strength exhibits distinguished ad-vantage over traditional heat-resistant aluminum alloys.The enhanced elevated-temperature strength is attributed to the reprecipitation of the Ni-bearing T-Al_(20)Cu_(2)Mn_(3)phase,whose number density increases over one time.The significant segregation of Ni,Ce,and Zr elements at the interfaces helps improve the thermal stability of the T phase.The thermostable T phase effectively strengthens the matrix by in-hibiting dislocation motion.Meanwhile,a highly interconnected 3D intermetallic network along the grain boundaries can still remain after long-term re-aging at 300℃,which is conducive to imposing a drag on the grain boundaries at high temperatures.This finding offers a viable route for enhancing the elevated-temperature strength of heat-resistant aluminum alloys,which could provide expanded opportunities for higher-temperature applications.展开更多
基金Project(51201044) supported by the National Natural Science Foundation of ChinaProject(HEUCFG201836) supported by the Fundamental Research Funds for the Central Universities,China+1 种基金Project(LBH-Q16046) supported by the Postdoctoral Scientific Research Developmental Fund of Heilongjiang Province,ChinaProject supported by the Key Laboratory of Superlight Materials&Surface Technology(Harbin Engineering University),Ministry of Education,China
文摘To clarify phase transformation evolution of Nb-doped Ni-Mn-Ga bulk alloys after aging and ball milling, the microstructure and phase transformation of the aged and ball-milled dual-phase Nb-doped Ni-Mn-Ga alloys were investigated by SEM, EDS, XRD, DSC and susceptibility measurements. The as-cast alloys were mainly composed of the second phase with layer-shape and presented a reduced martensitic transformation with increasing the second phase content. The second phase transformed from layer-shape to dense bar-shape and the martensitic transformation was enhanced after being quenched at 1173 K. After aging at 673 and 873 K, the 3% Nb alloy with less second phase exhibited a single-step phase transformation, whereas the 6% Nb and 9% Nb alloys with more second phase exhibited a two-step martensitic transformation and Curie transition. The martensitic transformation and Curie transition of the as-milled dual-phase particles disappeared and were retrieved after annealing at 1073 K due to the recovery of high ordered structure of the matrix.
基金Funded by the National Natural Science Foundation of China (No.50302007)Chenguang Project of Wuhan(No.20055003059-7) 2003 Opening Foundation of State Key Laboratory of Advanced Technology for Materials Synthesis and Processing.
文摘Porous glass was prepared by thermally treating sodium borosilicate glass for different time, the effect of thermal treatment on pore size distribution was discussed and the pore size of the prepared porous glass was measured by scanning electron microscopy （SEM） and differential thermal analysis （DTA）. The results show that the optimum porous glass with an average diameter of 80 nm can be prepared by thermal treatment at 600℃ for 12 h and then acid treatment for 12 h in 2 mol·L^-1 hydrochloric acid solution.
基金Project(1343-77212)supported by the Innovation Program for Graduate Students of Central South University,China
文摘Nanostructured zirconia top coat was deposited by air plasma spray and NiCoCrAlTaY bond coat was deposited on Ni substrate by low pressure plasma spray.Nanostructured and conventional thermal barrier coatings were heat-treated at temperature varying from 1050 to 1 250oC for 2-20 h.The results show that obvious grain growth was found in both nanostructured and conventional thermal barrier coatings(TBCs)after high temperature heat treatment.Monoclinic/tetragonal phases were transformed into cubic phase in the agglomerated nano-powder after calcination.The cubic phase content increased with increasing calcination temperature.Calcination of the powder made the yttria distributed on the surface of the nanocrystalline particles dissolve in zirconia when grains grew.Different from the phase constituent of the as-sprayed conventional TBC which consisted of diffusionlesstransformed tetragonal,the as-sprayed nanostructured TBC consisted of cubic phase.
文摘Heat-resistant aluminum alloys are widely used in aerospace and automotive fields for manufacturing hot components due to their advantages in lightweight design and energy conservation.However,the high-temperature strength of existing cast aluminum alloys is always limited to about 100 MPa at 350℃due to coarsening and transformation of strengthening phases.Here,we reveal that the yield strength and ultimate tensile strength of the T6 state Al-8.4Cu-2.3Ce-1.0Mn-0.5Ni-0.2Zr alloy at 400◦C increase by 34%and 44%after re-aging at 300℃for 100 h,and its thermal strength exhibits distinguished ad-vantage over traditional heat-resistant aluminum alloys.The enhanced elevated-temperature strength is attributed to the reprecipitation of the Ni-bearing T-Al_(20)Cu_(2)Mn_(3)phase,whose number density increases over one time.The significant segregation of Ni,Ce,and Zr elements at the interfaces helps improve the thermal stability of the T phase.The thermostable T phase effectively strengthens the matrix by in-hibiting dislocation motion.Meanwhile,a highly interconnected 3D intermetallic network along the grain boundaries can still remain after long-term re-aging at 300℃,which is conducive to imposing a drag on the grain boundaries at high temperatures.This finding offers a viable route for enhancing the elevated-temperature strength of heat-resistant aluminum alloys,which could provide expanded opportunities for higher-temperature applications.
