Proton exchange membrane fuel cells(PEMFCs)are largely used in various applications because of their pollution-free products and high energy conversion efficiency.In order to improve the related design,in the present ...Proton exchange membrane fuel cells(PEMFCs)are largely used in various applications because of their pollution-free products and high energy conversion efficiency.In order to improve the related design,in the present work a new spiral flow field with a bypass is proposed.The reaction gas enters the flow field in the central path and diffuses in two directions through the flow channel and the bypass.The bypasses are arranged incrementally.The number of bypasses and the cross-section size of the bypasses are varied parametrically while a single-cell model of the PEMFC is used.The influence of the concentration of liquid water and oxygen in the cell on the performance of different flow fields is determined by means of Computational fluid dynamics(COMSOL Multiphysics software).Results show that when the bypass number is 48 and its cross-sectional area is 0.5 mm^(2),the cell exhibits the best performances.展开更多
In order To evaluate whether the parameters of spiral artery blood flow, as measured by transvaginal color Doppler, may be used to assess endometrium receptivity prior to embryo transfer (ET), a retrospective study of...In order To evaluate whether the parameters of spiral artery blood flow, as measured by transvaginal color Doppler, may be used to assess endometrium receptivity prior to embryo transfer (ET), a retrospective study of 94 infertile women who had undergone ART treatments with different outcomes (pregnant or nonpregnant) was done. Subendometrial blood flow was evaluated. The resistance index (RI), systolic/diastolic ratio (S/D) and pulsatility index (PI) were significantly lower in those who achieved pregnancy as compared with those who did not: 0.62±0.04 vs 0.68±0.04 (P<0.001), 2.66±0.33 vs 3.19±0.39 (P<0.01) and 1.15±0.17 vs 1.34±0.22 (P<0.05), respectively. Furthermore, when RI>0.72, PI>1.6, and S/D>3.6, no pregnancy occurred. These data suggest that the parameters of spiral artery blood flow could be used as a new assay in predicting endometrial receptivity before ET.展开更多
In view of the importance of gas-liquid two-phase spiral flow and the few research reports at home and abroad,the gas-liquid two-phase spiral flow patterns have been researched in a horizontal pipe with different para...In view of the importance of gas-liquid two-phase spiral flow and the few research reports at home and abroad,the gas-liquid two-phase spiral flow patterns have been researched in a horizontal pipe with different parameters investigated by means of observation and a high-speed camera.Since the appearance of spiral flow makes the distribution of twophase flow more complicated,the flow patterns appearing in the experiments were divided into the Spiral Wavy Stratified Flow(SWS),the Spiral Bubble Flow(SB),the Spiral Slug Flow(SS),the Spiral Linear Flow(SL),the Spiral Axial Flow(SA),and the Spiral Dispersed Flow(SD) by the observations and with reference to the predecessors' research achievements.A flow pattern map has been drawn up.The influence of velocity,vane angle and vane area on flow pattern conversion boundary and pressure drop has been studied,with a solid foundation laid for the future research work.展开更多
Aspiration spiral flow type centrifugal flotation machine takes full advantage of centrifugal force field and gravitational field, and strengthens flotation of coal slurry. As a new-type flotation machine of high effi...Aspiration spiral flow type centrifugal flotation machine takes full advantage of centrifugal force field and gravitational field, and strengthens flotation of coal slurry. As a new-type flotation machine of high efficiency, its key component is bubble generator. Which completes the process of ore pulp inflation and liberalization. The design, parameters and working principle of bubble generator provide the design of the same device in similar equipment with reference. The result of industrial operation shows that this machine is of such features as small occupational area, greater concentration ratio, high processing capacity, high efficiency and lower investment etc.展开更多
In this paper,we investigate two dimensional subsonic and subsonic-sonic spiral flows outside a porous body.The existence and uniqueness of the subsonic spiral flow are obtained via variational formulation,which tends...In this paper,we investigate two dimensional subsonic and subsonic-sonic spiral flows outside a porous body.The existence and uniqueness of the subsonic spiral flow are obtained via variational formulation,which tends to a given radially symmetric subsonic spiral flow at far field.The optimal decay rate at far field is also derived by Kelvin ’s transformation and some elliptic estimates.By extracting spiral subsonic solutions as the approximate sequences,we obtain the spiral subsonic-sonic limit solution by utilizing the compensated compactness.The main ingredients of our analysis are methods of calculus of variations,the theory of second-order quasilinear equations and the compensated compactness framework.展开更多
A new effective technique, useful in telecommunications industry for passing an optical telephone cord attached to a connector through pipeline,has been developed using the spiral flow. Using this technique, the cord ...A new effective technique, useful in telecommunications industry for passing an optical telephone cord attached to a connector through pipeline,has been developed using the spiral flow. Using this technique, the cord could be passed through a straight pipeline 150 meters long and a roll of vinyl tube 50 meters long. However, under the same condition, the cord could not pass through when using the turbulent flow. To obtain a high speed stable spiral flow, a nozzle with an annular slit connected to a conical cylinder was used. A pressurized fluid with no tangential flow was supplied through this slit and the fluid, passing through the conical cylinder, was deformed into spiral flow with the steeper axial velocity distribution compared to that of turbulence pipe flow due to Coanda effect and instability. As a result, the cord was attracted to the axis area of the pipe, which effectively increased the ability for the work of cord passing. This high ability for cord passing is attributed mainly to the reduction of the friction made between the cord and the pipe wall, caused by the deformation to spiral flow.展开更多
The dry-gas seal has been widely used in different industries. With increased spin speed of the rotator shaft, turbulence occurs in the gas film between the stator and rotor seal faces. For the micro-scale flow in the...The dry-gas seal has been widely used in different industries. With increased spin speed of the rotator shaft, turbulence occurs in the gas film between the stator and rotor seal faces. For the micro-scale flow in the gas film and grooves, turbulence can change the pressure distribution of the gas film. Hence, the seal performance is influenced. However, turbulence effects and methods for their evaluation are not considered in the existing industrial designs of dry-gas seal. The present paper numerically obtains the turbulent flow fields of a spiral-groove dry-gas seal to analyze turbulence effects on seal performance. The direct numerical simulation (DNS) and Reynolds-averaged Navier-Stokes (RANS) methods are utilized to predict the velocity field properties in the grooves and gas film. The key performance parameter, open force, is obtained by integrating the pressure distribution, and the obtained result is in good agreement with the experimental data of other researchers. Very large velocity gradients are found in the sealing gas film because of the geometrical effects of the grooves. Considering turbulence effects, the calculation results show that both the gas film pressure and open force decrease. The RANS method underestimates the performance, compared with the DNS. The solution of the conventional Reynolds lubrication equation without turbulence effects suffers from significant calculation errors and a small application scope. The present study helps elucidate the physical mechanism of the hydrodynamic effects of grooves for improving and optimizing the industrial design or seal face pattern of a dry-gas seal.展开更多
An experimental study on heat transfer and resistance coefficients of linearly arranged smooth and spirally corrugated tube bundles in cross-flow was performed. The heat transfer and resistance coefficients are presen...An experimental study on heat transfer and resistance coefficients of linearly arranged smooth and spirally corrugated tube bundles in cross-flow was performed. The heat transfer and resistance coefficients are presented in this paper with transverse and longitudinal tube-pitch and tube geometries taken into account. The experiment's results can provide technical guidelines for application to horizontal air preheater with arranged in-line spirally corrugated tube bundles, especially to the air preheater for CFBCBs (Circulating Fluidized Bed Combustion Boilers).展开更多
Numerical analysis was performed to investigate flow and heat transfer characteristics in spiral coiled tube heat exchanger. Radius of curvature of the spiral coiled tube was gradually increased as total rotating angl...Numerical analysis was performed to investigate flow and heat transfer characteristics in spiral coiled tube heat exchanger. Radius of curvature of the spiral coiled tube was gradually increased as total rotating angle reached 12π. As the varying radius of curvature became a dominant flow parameter, three-dimensional flow analysis was performed to this flow together with different Reynolds numbers while constant wall heat flux condition was set in thermal field. From the analysis, centrifugal force due to curvature effect is found to have significant role in behavior of pressure drop and heat transfer. The centrifugal force enhances pressure drop and heat transfer to have generally higher values in the spiral coiled tube than those in the straight tube. Even then, friction factor and Nusselt number are found to follow the proportionality with square root of the Dean number. Individual effect of flow parameters of Reynolds number and curvature ratio was investigated and effect of Reynolds number is found to be stronger than that of curvature effect.展开更多
背景:现子宫内膜结构及子宫螺旋动脉血流参数对夫精宫腔内人工授精(artificial insemination by husband,AIH)妊娠率的影响水平尚不明确,该研究通过校准其他混杂因素后,确定了其独立影响因素,并构建了预测模型,具有较好的临床应用效能...背景:现子宫内膜结构及子宫螺旋动脉血流参数对夫精宫腔内人工授精(artificial insemination by husband,AIH)妊娠率的影响水平尚不明确,该研究通过校准其他混杂因素后,确定了其独立影响因素,并构建了预测模型,具有较好的临床应用效能。目的:基于子宫内膜结构及子宫螺旋动脉血流参数构建AIH临床妊娠预测模型及验证。方法:回顾性分析2017年1月至2021年1月于常州市妇幼保健院接受AIH助孕治疗患者共1299例,将其中1182例未临床妊娠者纳入未妊娠组,117例临床妊娠者纳入妊娠组;通过1∶1倾向评分匹配,妊娠组与未妊娠组各匹配成功93例;采用单、多因素分析筛选子宫内膜结构及子宫螺旋动脉血流参数对AIH结局的影响因素,通过受试者工作曲线确定各独立影响因素的最佳截断值,限制性立方样条法分析各独立影响因素对AIH妊娠影响的风险趋势,临床决策曲线与临床影响曲线对该联合预测模型的临床应用效能进行检验。结果与结论:①倾向评分后妊娠组与未妊娠组各非内膜因素均无显著统计学意义,数据具有较好的均衡性(P>0.05);②单因素分析结果显示,内膜下血管化指数、血流指数、血管化血流指数、子宫动脉阻力指数、子宫动脉搏动指数、收缩期最高血流速度/舒张期末血流速度、基底子宫内膜到外子宫肌层内层平均交界区、最大交界区厚度为AIH妊娠的影响因素(P<0.05);③多因素Logistic回归结果显示,基底子宫内膜到外子宫肌层内层平均交界区厚度、子宫动脉搏动指数、血管化血流指数为AIH妊娠的独立影响因素,影响大小依次为血管化血流指数>基底子宫内膜到外子宫肌层内层平均交界区厚度>子宫动脉搏动指数;④受试者工作曲线显示,血管化血流指数的曲线下面积为0.704(0.629,0.779),最佳截断值为6.26;基底子宫内膜到外子宫肌层内层平均交界区厚度的曲线下面积为0.660(0.582,0.739),最佳截断值为6.38;子宫动脉搏动指数的曲线下面积为0.642(0.563,0.721),最佳截断值为1.18;⑤限制性立方样条曲线显示,当血管化血流指数>6.24时,其对AIH妊娠具有显著的正影响趋势;基底子宫内膜到外子宫肌层内层平均交界区厚度≤6.55 mm时,其对AIH妊娠具有显著的正影响趋势;当子宫动脉搏动指数>1.27时,其对AIH妊娠具有负影响风险;⑥临床决策曲线与临床影响曲线显示,该联合预测模型在阈概率值为0.17-0.93时具有临床最大净获益,且在该阈概率范围内损失与获益的比值始终小于1,显示出该联合预测模型具有较好的临床效能;⑦结果表明,通过倾向评分与多因素Logistic回归校正子宫内膜外其他混杂因素后,基底子宫内膜到外子宫肌层内层平均交界区厚度、子宫动脉搏动指数、血管化血流指数为AIH妊娠的独立影响因素,通过对其最佳截断值的确定与风险趋势性评估,证实该联合预测模型具有较好的预测价值与临床应用效能。展开更多
In order to solve the problem of using middle or low water pressure to form fine water mist,a new nozzle is proposed in fire rescue robot.Existing water mist nozzles are basically used for high pressure and in large s...In order to solve the problem of using middle or low water pressure to form fine water mist,a new nozzle is proposed in fire rescue robot.Existing water mist nozzles are basically used for high pressure and in large size,complex structure and poor low pressure atomization effect in comparison with requirement of snake-like fire rescue robots.On the basis of comprehensive typical spray nozzles,a direct spiral double helix converging nozzle(DSDHCN) is proposed,which has the advantages of small volume,light weight,simple structure,and convenient installation.To make the spray nozzle have good performance,and meet the requirements of more efficient fire extinguishing,a numerical study is carried out to analyze the internal and external full flow field of nozzle.A gas-liquid two-phase flow is applied to simulate the external full flow field of nozzle with VOF model in fluent software.The simulation results show the real situation of water flow out of the atomization nozzle and the water jet trajectory.Some simulations about middle or low water pressure direct spiral double helix converging optimized nozzle have been done in 30 bar pressure.The simulation results show that the optimized nozzle structure not only makes the spray droplets have a good cone angle,but also have a sufficient axial velocity,which proves the structure rationality of the proposed optimized nozzle.展开更多
In this paper, the standard k-εtwo-equation model is adopted to numerically simulate fully developed fluid flow and heat transfer in a spiral finned tube within a cracking furnace for ethylene manufacturing. By varia...In this paper, the standard k-εtwo-equation model is adopted to numerically simulate fully developed fluid flow and heat transfer in a spiral finned tube within a cracking furnace for ethylene manufacturing. By variable transformation, the orlglnal 3-D problem is converted into a 2-D problem in spiral coordinates. The algorithm of SIMPLEC is used to study the fully developed fluld flow and heat transfer in the spiral finned tube at constant periphery temperature and constant axial heat flux, The computed results agree pretty well with the experimental data obtained from the industry, Further studies on the fluid flows and temperature profiles at different Reynolds numbers within straight and spiral finned tubes are conducted and the mechanisms involved are explored. It is found that with the spiral finned tube, pressure drop increases to a great extent whereas heat transfer tends to be decreased.展开更多
基金Thanks to Major Scientific and Technological Innovation Projects in Shandong Province(2018-CXGC0803)for the financial support of this article.
文摘Proton exchange membrane fuel cells(PEMFCs)are largely used in various applications because of their pollution-free products and high energy conversion efficiency.In order to improve the related design,in the present work a new spiral flow field with a bypass is proposed.The reaction gas enters the flow field in the central path and diffuses in two directions through the flow channel and the bypass.The bypasses are arranged incrementally.The number of bypasses and the cross-section size of the bypasses are varied parametrically while a single-cell model of the PEMFC is used.The influence of the concentration of liquid water and oxygen in the cell on the performance of different flow fields is determined by means of Computational fluid dynamics(COMSOL Multiphysics software).Results show that when the bypass number is 48 and its cross-sectional area is 0.5 mm^(2),the cell exhibits the best performances.
文摘In order To evaluate whether the parameters of spiral artery blood flow, as measured by transvaginal color Doppler, may be used to assess endometrium receptivity prior to embryo transfer (ET), a retrospective study of 94 infertile women who had undergone ART treatments with different outcomes (pregnant or nonpregnant) was done. Subendometrial blood flow was evaluated. The resistance index (RI), systolic/diastolic ratio (S/D) and pulsatility index (PI) were significantly lower in those who achieved pregnancy as compared with those who did not: 0.62±0.04 vs 0.68±0.04 (P<0.001), 2.66±0.33 vs 3.19±0.39 (P<0.01) and 1.15±0.17 vs 1.34±0.22 (P<0.05), respectively. Furthermore, when RI>0.72, PI>1.6, and S/D>3.6, no pregnancy occurred. These data suggest that the parameters of spiral artery blood flow could be used as a new assay in predicting endometrial receptivity before ET.
基金supported by the National Natural Science Foundation of China (Grant number 51776015)
文摘In view of the importance of gas-liquid two-phase spiral flow and the few research reports at home and abroad,the gas-liquid two-phase spiral flow patterns have been researched in a horizontal pipe with different parameters investigated by means of observation and a high-speed camera.Since the appearance of spiral flow makes the distribution of twophase flow more complicated,the flow patterns appearing in the experiments were divided into the Spiral Wavy Stratified Flow(SWS),the Spiral Bubble Flow(SB),the Spiral Slug Flow(SS),the Spiral Linear Flow(SL),the Spiral Axial Flow(SA),and the Spiral Dispersed Flow(SD) by the observations and with reference to the predecessors' research achievements.A flow pattern map has been drawn up.The influence of velocity,vane angle and vane area on flow pattern conversion boundary and pressure drop has been studied,with a solid foundation laid for the future research work.
文摘Aspiration spiral flow type centrifugal flotation machine takes full advantage of centrifugal force field and gravitational field, and strengthens flotation of coal slurry. As a new-type flotation machine of high efficiency, its key component is bubble generator. Which completes the process of ore pulp inflation and liberalization. The design, parameters and working principle of bubble generator provide the design of the same device in similar equipment with reference. The result of industrial operation shows that this machine is of such features as small occupational area, greater concentration ratio, high processing capacity, high efficiency and lower investment etc.
基金partially supported by National Natural Science Foundation of China(11701431,11971307,12071359)。
文摘In this paper,we investigate two dimensional subsonic and subsonic-sonic spiral flows outside a porous body.The existence and uniqueness of the subsonic spiral flow are obtained via variational formulation,which tends to a given radially symmetric subsonic spiral flow at far field.The optimal decay rate at far field is also derived by Kelvin ’s transformation and some elliptic estimates.By extracting spiral subsonic solutions as the approximate sequences,we obtain the spiral subsonic-sonic limit solution by utilizing the compensated compactness.The main ingredients of our analysis are methods of calculus of variations,the theory of second-order quasilinear equations and the compensated compactness framework.
文摘A new effective technique, useful in telecommunications industry for passing an optical telephone cord attached to a connector through pipeline,has been developed using the spiral flow. Using this technique, the cord could be passed through a straight pipeline 150 meters long and a roll of vinyl tube 50 meters long. However, under the same condition, the cord could not pass through when using the turbulent flow. To obtain a high speed stable spiral flow, a nozzle with an annular slit connected to a conical cylinder was used. A pressurized fluid with no tangential flow was supplied through this slit and the fluid, passing through the conical cylinder, was deformed into spiral flow with the steeper axial velocity distribution compared to that of turbulence pipe flow due to Coanda effect and instability. As a result, the cord was attracted to the axis area of the pipe, which effectively increased the ability for the work of cord passing. This high ability for cord passing is attributed mainly to the reduction of the friction made between the cord and the pipe wall, caused by the deformation to spiral flow.
基金supported by Scientific Research Foundation for Returned Scholars,Ministry of Education of China
文摘The dry-gas seal has been widely used in different industries. With increased spin speed of the rotator shaft, turbulence occurs in the gas film between the stator and rotor seal faces. For the micro-scale flow in the gas film and grooves, turbulence can change the pressure distribution of the gas film. Hence, the seal performance is influenced. However, turbulence effects and methods for their evaluation are not considered in the existing industrial designs of dry-gas seal. The present paper numerically obtains the turbulent flow fields of a spiral-groove dry-gas seal to analyze turbulence effects on seal performance. The direct numerical simulation (DNS) and Reynolds-averaged Navier-Stokes (RANS) methods are utilized to predict the velocity field properties in the grooves and gas film. The key performance parameter, open force, is obtained by integrating the pressure distribution, and the obtained result is in good agreement with the experimental data of other researchers. Very large velocity gradients are found in the sealing gas film because of the geometrical effects of the grooves. Considering turbulence effects, the calculation results show that both the gas film pressure and open force decrease. The RANS method underestimates the performance, compared with the DNS. The solution of the conventional Reynolds lubrication equation without turbulence effects suffers from significant calculation errors and a small application scope. The present study helps elucidate the physical mechanism of the hydrodynamic effects of grooves for improving and optimizing the industrial design or seal face pattern of a dry-gas seal.
文摘An experimental study on heat transfer and resistance coefficients of linearly arranged smooth and spirally corrugated tube bundles in cross-flow was performed. The heat transfer and resistance coefficients are presented in this paper with transverse and longitudinal tube-pitch and tube geometries taken into account. The experiment's results can provide technical guidelines for application to horizontal air preheater with arranged in-line spirally corrugated tube bundles, especially to the air preheater for CFBCBs (Circulating Fluidized Bed Combustion Boilers).
基金supported by the Second Stage of Brain Korea 21 Projects,Korea
文摘Numerical analysis was performed to investigate flow and heat transfer characteristics in spiral coiled tube heat exchanger. Radius of curvature of the spiral coiled tube was gradually increased as total rotating angle reached 12π. As the varying radius of curvature became a dominant flow parameter, three-dimensional flow analysis was performed to this flow together with different Reynolds numbers while constant wall heat flux condition was set in thermal field. From the analysis, centrifugal force due to curvature effect is found to have significant role in behavior of pressure drop and heat transfer. The centrifugal force enhances pressure drop and heat transfer to have generally higher values in the spiral coiled tube than those in the straight tube. Even then, friction factor and Nusselt number are found to follow the proportionality with square root of the Dean number. Individual effect of flow parameters of Reynolds number and curvature ratio was investigated and effect of Reynolds number is found to be stronger than that of curvature effect.
文摘背景:现子宫内膜结构及子宫螺旋动脉血流参数对夫精宫腔内人工授精(artificial insemination by husband,AIH)妊娠率的影响水平尚不明确,该研究通过校准其他混杂因素后,确定了其独立影响因素,并构建了预测模型,具有较好的临床应用效能。目的:基于子宫内膜结构及子宫螺旋动脉血流参数构建AIH临床妊娠预测模型及验证。方法:回顾性分析2017年1月至2021年1月于常州市妇幼保健院接受AIH助孕治疗患者共1299例,将其中1182例未临床妊娠者纳入未妊娠组,117例临床妊娠者纳入妊娠组;通过1∶1倾向评分匹配,妊娠组与未妊娠组各匹配成功93例;采用单、多因素分析筛选子宫内膜结构及子宫螺旋动脉血流参数对AIH结局的影响因素,通过受试者工作曲线确定各独立影响因素的最佳截断值,限制性立方样条法分析各独立影响因素对AIH妊娠影响的风险趋势,临床决策曲线与临床影响曲线对该联合预测模型的临床应用效能进行检验。结果与结论:①倾向评分后妊娠组与未妊娠组各非内膜因素均无显著统计学意义,数据具有较好的均衡性(P>0.05);②单因素分析结果显示,内膜下血管化指数、血流指数、血管化血流指数、子宫动脉阻力指数、子宫动脉搏动指数、收缩期最高血流速度/舒张期末血流速度、基底子宫内膜到外子宫肌层内层平均交界区、最大交界区厚度为AIH妊娠的影响因素(P<0.05);③多因素Logistic回归结果显示,基底子宫内膜到外子宫肌层内层平均交界区厚度、子宫动脉搏动指数、血管化血流指数为AIH妊娠的独立影响因素,影响大小依次为血管化血流指数>基底子宫内膜到外子宫肌层内层平均交界区厚度>子宫动脉搏动指数;④受试者工作曲线显示,血管化血流指数的曲线下面积为0.704(0.629,0.779),最佳截断值为6.26;基底子宫内膜到外子宫肌层内层平均交界区厚度的曲线下面积为0.660(0.582,0.739),最佳截断值为6.38;子宫动脉搏动指数的曲线下面积为0.642(0.563,0.721),最佳截断值为1.18;⑤限制性立方样条曲线显示,当血管化血流指数>6.24时,其对AIH妊娠具有显著的正影响趋势;基底子宫内膜到外子宫肌层内层平均交界区厚度≤6.55 mm时,其对AIH妊娠具有显著的正影响趋势;当子宫动脉搏动指数>1.27时,其对AIH妊娠具有负影响风险;⑥临床决策曲线与临床影响曲线显示,该联合预测模型在阈概率值为0.17-0.93时具有临床最大净获益,且在该阈概率范围内损失与获益的比值始终小于1,显示出该联合预测模型具有较好的临床效能;⑦结果表明,通过倾向评分与多因素Logistic回归校正子宫内膜外其他混杂因素后,基底子宫内膜到外子宫肌层内层平均交界区厚度、子宫动脉搏动指数、血管化血流指数为AIH妊娠的独立影响因素,通过对其最佳截断值的确定与风险趋势性评估,证实该联合预测模型具有较好的预测价值与临床应用效能。
基金Supported by the National Natural Science Foundation of China(No.61105086)Self-Planned Task(SKLRS-2010-MS-12)of State Key Laboratory of Robotics and System(HIT)Hubei Province Natural Science Foundation(No.2010CDB03405)
文摘In order to solve the problem of using middle or low water pressure to form fine water mist,a new nozzle is proposed in fire rescue robot.Existing water mist nozzles are basically used for high pressure and in large size,complex structure and poor low pressure atomization effect in comparison with requirement of snake-like fire rescue robots.On the basis of comprehensive typical spray nozzles,a direct spiral double helix converging nozzle(DSDHCN) is proposed,which has the advantages of small volume,light weight,simple structure,and convenient installation.To make the spray nozzle have good performance,and meet the requirements of more efficient fire extinguishing,a numerical study is carried out to analyze the internal and external full flow field of nozzle.A gas-liquid two-phase flow is applied to simulate the external full flow field of nozzle with VOF model in fluent software.The simulation results show the real situation of water flow out of the atomization nozzle and the water jet trajectory.Some simulations about middle or low water pressure direct spiral double helix converging optimized nozzle have been done in 30 bar pressure.The simulation results show that the optimized nozzle structure not only makes the spray droplets have a good cone angle,but also have a sufficient axial velocity,which proves the structure rationality of the proposed optimized nozzle.
文摘In this paper, the standard k-εtwo-equation model is adopted to numerically simulate fully developed fluid flow and heat transfer in a spiral finned tube within a cracking furnace for ethylene manufacturing. By variable transformation, the orlglnal 3-D problem is converted into a 2-D problem in spiral coordinates. The algorithm of SIMPLEC is used to study the fully developed fluld flow and heat transfer in the spiral finned tube at constant periphery temperature and constant axial heat flux, The computed results agree pretty well with the experimental data obtained from the industry, Further studies on the fluid flows and temperature profiles at different Reynolds numbers within straight and spiral finned tubes are conducted and the mechanisms involved are explored. It is found that with the spiral finned tube, pressure drop increases to a great extent whereas heat transfer tends to be decreased.