Aφ6-m Tunnel Boring Machine Steel Arch Splicing Manipulator

Robotic splicing of steel arches is a challenging task that is necessary to realize the grasping and docking of steel arches in a limited space.Steel arches often have a mass of more than 200 kg and length of more than 4 m.Owing to the large volume and mass of steel arches and the high requirements for accurately positioning the splicing,it is difficult for a general manipulator to meet the stiffness requirements.To enhance the structural stiffness of the steel arch splicing manipulator,a single-degree-of-freedom(DOF)closed-loop mechanism was added to the grasping structure of the manipulator.Based on the basic principle of structural synthesis,a solution model of the single-DOF closed-loop mechanism was developed,and alternative kinematic pairs of the mechanism with different input constraints and output requirements were derived.Based on this model,a design method for a single-DOF closed-loop grasping mechanism and a posture adjustment mechanism for a steel arch was devised.Combined with the same dimensional subspace equivalence principle of the graphical-type synthesis method,12 types of steel arch splicing manipulator were constructed.By analyzing the motion/force transmission and structural complexity of the steel arch splicing manipulators,the best scheme was selected.A prototype of the steel arch splicing manipulator was manufactured.Adams software was used to obtain clearly the output trajectory of the end of the manipulator.The relative spatial positions of the upper and lower jaws under different working stages were analyzed,demonstrating that the manipulator satisfied the grasping requirements.Through a steel arch splicing experiment,the grasping effect,docking accuracy,and splicing efficiency of the manipulator met the design requirements.The steel arch splicing manipulator can replace the manual completion of the steel arch splicing operation,significantly improving the operation efficiency.