Combined support mechanism of rock bolts and anchor cables for adjacent roadways in the external staggered split-level panel layout

Using the spatial structure of the external staggered split-level panel layout,a combined support technology for adjacent roadways was developed and analyzed for a rock bolt and anchor cable mechanism.The influence of the side rock bolt and anchor cable parameters on the mechanical properties of the anchorage body and the support stress distribution of the lateral coal body were revealed using the FLAC3D software.The optimal support parameters of the side rock bolts and anchor cables were subsequently determined,and the support effect of gob-side entry in a mining scenario was verified.The results show that the support of the side rock bolts and anchor cables improves the mechanical properties and stress state of the anchorage body,producing a good protective effect on the coal body of the air-intake entry roof and side wall.This is beneficial to the stability of the side wall and the realization of the suspension effect for roof rock bolts and anchor cables,which in turn makes the surrounding rock maintenance of the gob-side entry to a thick coal seam more favorable.

Optimization Design of the Multi-Layer Cross-Sectional Layout of An Umbilical Based on the GA-GLM

Marine umbilical is one of the key equipment for subsea oil and gas exploitation,which is usually integrated by a great number of different functional components with multi-layers.The layout of these components directly affects manufacturing,operation and storage performances of the umbilical.For the multi-layer cross-sectional layout design of the umbilical,a quantifiable multi-objective optimization model is established according to the operation and storage requirements.Considering the manufacturing factors,the multi-layering strategy based on contact point identification is introduced for a great number of functional components.Then,the GA-GLM global optimization algorithm is proposed combining the genetic algorithm and the generalized multiplier method,and the selection operator of the genetic algorithm is improved based on the steepest descent method.Genetic algorithm is used to find the optimal solution in the global space,which can converge from any initial layout to the feasible layout solution.The feasible layout solution is taken as the initial value of the generalized multiplier method for fast and accurate solution.Finally,taking umbilicals with a great number of components as examples,the results show that the cross-sectional performance of the umbilical obtained by optimization algorithm is better and the solution efficiency is higher.Meanwhile,the multi-layering strategy is effective and feasible.The design method proposed in this paper can quickly obtain the optimal multi-layer cross-sectional layout,which replaces the manual design,and provides useful reference and guidance for the umbilical industry.

Web Layout Design of Large Cavity Structures Based on Topology Optimization

Large cavity structures are widely employed in aerospace engineering, such as thin-walled cylinders, blades andwings. Enhancing performance of aerial vehicles while reducing manufacturing costs and fuel consumptionhas become a focal point for contemporary researchers. Therefore, this paper aims to investigate the topologyoptimization of large cavity structures as a means to enhance their performance, safety, and efficiency. By usingthe variable density method, lightweight design is achieved without compromising structural strength. Theoptimization model considers both concentrated and distributed loads, and utilizes techniques like sensitivityfiltering and projection to obtain a robust optimized configuration. The mechanical properties are checked bycomparing the stress distribution and displacement of the unoptimized and optimized structures under the sameload. The results confirm that the optimized structures exhibit improved mechanical properties, thus offering keyinsights for engineering lightweight, high-strength large cavity structures.

Development of Fixture Layout Optimization for Thin-Walled Parts:A Review

An increasing number of researchers have researched fixture layout optimization for thin-walled part assembly during the past decades.However,few papers systematically review these researches.By analyzing existing literature,this paper summarizes the process of fixture layout optimization and the methods applied.The process of optimization is made up of optimization objective setting,assembly variation/deformation modeling,and fixture layout optimization.This paper makes a review of the fixture layout for thin-walled parts according to these three steps.First,two different kinds of optimization objectives are introduced.Researchers usually consider in-plane variations or out-of-plane deformations when designing objectives.Then,modeling methods for assembly variation and deformation are divided into two categories:Mechanism-based and data-based methods.Several common methods are discussed respectively.After that,optimization algorithms are reviewed systematically.There are two kinds of optimization algorithms:Traditional nonlinear programming and heuristic algorithms.Finally,discussions on the current situation are provided.The research direction of fixture layout optimization in the future is discussed from three aspects:Objective setting,improving modeling accuracy and optimization algorithms.Also,a new research point for fixture layout optimization is discussed.This paper systematically reviews the research on fixture layout optimization for thin-walled parts,and provides a reference for future research in this field.

Performance-Oriented Layout Synthesis for Quantum Computing

Layout synthesis in quantum computing is crucial due to the physical constraints of quantum devices where quantum bits(qubits)can only interact effectively with their nearest neighbors.This constraint severely impacts the design and efficiency of quantum algorithms,as arranging qubits optimally can significantly reduce circuit depth and improve computational performance.To tackle the layout synthesis challenge,we propose an algorithm based on integer linear programming(ILP).ILP is well-suited for this problem as it can formulate the optimization objective of minimizing circuit depth while adhering to the nearest neighbor interaction constraint.The algorithm aims to generate layouts that maximize qubit connectivity within the given physical constraints of the quantum device.For experimental validation,we outline a clear and feasible setup using real quantum devices.This includes specifying the type and configuration of the quantum hardware used,such as the number of qubits,connectivity constraints,and any technological limitations.The proposed algorithm is implemented on these devices to demonstrate its effectiveness in producing depth-optimal quantum circuit layouts.By integrating these elements,our research aims to provide practical solutions to enhance the efficiency and scalability of quantum computing systems,paving the way for advancements in quantum algorithm design and implementation.

Optimizing wind farm layout for enhanced electricity extraction using a new hybrid PSO-ANN method

With the growing need for renewable energy,wind farms are playing an important role in generating clean power from wind resources.The best wind turbine architecture in a wind farm has a major influence on the energy extraction efficiency.This paper describes a unique strategy for optimizing wind turbine locations on a wind farm that combines the capabilities of particle swarm optimization(PSO)and artificial neural networks(ANNs).The PSO method was used to explore the solution space and develop preliminary turbine layouts,and the ANN model was used to fine-tune the placements based on the predicted energy generation.The proposed hybrid technique seeks to increase energy output while considering site-specific wind patterns and topographical limits.The efficacy and superiority of the hybrid PSO-ANN methodology are proved through comprehensive simulations and comparisons with existing approaches,giving exciting prospects for developing more efficient and sustainable wind farms.The integration of ANNs and PSO in our methodology is of paramount importance because it leverages the complementary strengths of both techniques.Furthermore,this novel methodology harnesses historical data through ANNs to identify optimal turbine positions that align with the wind speed and direction and enhance energy extraction efficiency.A notable increase in power generation is observed across various scenarios.The percentage increase in the power generation ranged from approximately 7.7%to 11.1%.Owing to its versatility and adaptability to site-specific conditions,the hybrid model offers promising prospects for advancing the field of wind farm layout optimization and contributing to a greener and more sustainable energy future.

GNN Representation Learning and Multi-Objective Variable Neighborhood Search Algorithm for Wind Farm Layout Optimization

With the increasing demand for electrical services,wind farm layout optimization has been one of the biggest challenges that we have to deal with.Despite the promising performance of the heuristic algorithm on the route network design problem,the expressive capability and search performance of the algorithm on multi-objective problems remain unexplored.In this paper,the wind farm layout optimization problem is defined.Then,a multi-objective algorithm based on Graph Neural Network(GNN)and Variable Neighborhood Search(VNS)algorithm is proposed.GNN provides the basis representations for the following search algorithm so that the expressiveness and search accuracy of the algorithm can be improved.The multi-objective VNS algorithm is put forward by combining it with the multi-objective optimization algorithm to solve the problem with multiple objectives.The proposed algorithm is applied to the 18-node simulation example to evaluate the feasibility and practicality of the developed optimization strategy.The experiment on the simulation example shows that the proposed algorithm yields a reduction of 6.1% in Point of Common Coupling(PCC)over the current state-of-the-art algorithm,which means that the proposed algorithm designs a layout that improves the quality of the power supply by 6.1%at the same cost.The ablation experiments show that the proposed algorithm improves the power quality by more than 8.6% and 7.8% compared to both the original VNS algorithm and the multi-objective VNS algorithm.

Optimizing Memory Access Efficiency in CUDA Kernel via Data Layout Technique

Over the past decade, Graphics Processing Units (GPUs) have revolutionized high-performance computing, playing pivotal roles in advancing fields like IoT, autonomous vehicles, and exascale computing. Despite these advancements, efficiently programming GPUs remains a daunting challenge, often relying on trial-and-error optimization methods. This paper introduces an optimization technique for CUDA programs through a novel Data Layout strategy, aimed at restructuring memory data arrangement to significantly enhance data access locality. Focusing on the dynamic programming algorithm for chained matrix multiplication—a critical operation across various domains including artificial intelligence (AI), high-performance computing (HPC), and the Internet of Things (IoT)—this technique facilitates more localized access. We specifically illustrate the importance of efficient matrix multiplication in these areas, underscoring the technique’s broader applicability and its potential to address some of the most pressing computational challenges in GPU-accelerated applications. Our findings reveal a remarkable reduction in memory consumption and a substantial 50% decrease in execution time for CUDA programs utilizing this technique, thereby setting a new benchmark for optimization in GPU computing.

Study on the general layout of semi-submersible offshore drilling platforms based on process flow

The general layout of 6th generation semi-submersible drilling platforms is the main factor impacting the efficiency of their drilling operations. This paper provides a compound/integrated algorithm based on process flow that is aimed at improving efficiency, while giving attention to stability and safety at the same time. The paper describes the process flow of dual drilling centers and a hierarchical division of rigs based on the different modes of transportation of various drilling support systems. The general layout-centripetal overall arrangement spatially was determined based on drilling efficiency. We derived our modules according to drilling functionality; the modules became our basic layout units. We applied different layout algorithm to mark out the upper and lower decks. That is, the upper deck was designed based on the lowest transportation cost while the lower deck＇s calculations were based on the best-fit scope. Storage configurations in columns and pontoons were also considered for the layout design. Finally the center of gravity was taken into consideration and the general layout was adjusted accordingly, to result in an optimal center of gravity. The methodology of the general layout can provide a reference for implementation of domestic designs of semi-submersible rigs.

NOVEL APPROACH TO LOCATOR LAYOUT OPTIMIZATION BASED ON GENETIC ALGORITHM

Proper fixture design is crucial to obtain the better product quality according to the design specification during the workpiece fabrication. Locator layout planning is one of the most important tasks in the fixture design process. However, the design of a fixture relies heavily on the designerts expertise and experience up to now. Therefore, a new approach to loeator layout determination for workpieces with arbitrary complex surfaces is pro- posed for the first time. Firstly, based on the fuzzy judgment method, the proper locating reference and locator - numbers are determined with consideration of surface type, surface area and position tolerance. Secondly, the lo- cator positions are optimized by genetic algorithm（GA）. Finally, a typical example shows that the approach is su- perior to the experiential method and can improve positioning accuracy effectively.

Plane Layout Features of Residential Courtyards in Henan

The traditional houses with various forms in Henan province experienced thousands of years.Its courtyard appearance which changes greatly can be summarized into four types:quadrangle,three-section compound,kiln housing and mountainous housing.In this paper,the courtyard of the showing width of 1-2 rooms are called the narrow-type courtyard,with 2-3 rooms are called the wide-type courtyard,with less one room is called very narrow-type courtyard,and with over three rooms are called very wide-type courtyard.

Research on the rationality of artificial reef layout of Dashentang

By the means of technology of CFD （Computational Fluid Dynamics）, this research has studied the surrounding flow field effect of different combination of artificial reefs. In the study, four kinds of configurations are used to simulate numerically and these are ＂444＂ three columns, ＂464＂ three columns, ＂12345＂ five triangles and the ＂34543＂ five column regular hexagon .The result shows that the combination of artificial reefs of Dashentang can play a good role in regulating the reefs.

Fame:A Fast Detailed Placement Algorithm for Standard\| Cell Layout Based on Mixed Mincut and Enumeration

Rapid progress in manufacturing greatly challenges to the VLSI physical design in both speed and performance. A fast detailed placement algorithm, FAME is presented in this paper, according to these demands. It inherits the optimal positions of cells given by a global placer and exact position to each cell by local optimization. FM Mincut heuristic and local enumeration are used to optimize the total wirelength in y and x directions respectively, and a two way mixed optimizing flow is adopted to combine the two methods for a better performance. Furthermore, a better enumeration strategy is introduced to speed up the algorithm. An extension dealing with blockages in placement has also been discussed. Experimental results show that FAME runs 4 times faster than RITUAL and achieves a 5% short in total wirelength on average.

Total Ionizing Dose Radiation Effects on MOS Transistors with Different Layouts

Both nMOS and pMOS transistors with two-edged and multi-finger layouts are fabricated in a standard commercial 0.6μm CMOS/bulk process to study their total ionizing dose （TID） radiation effects. The leakage current, threshold voltage shift, and transconductance of the devices are monitored before and after T-ray irradiation. Different device bias conditions are used during irradiation. The experiment results show that TID radiation effects on nMOS devices are very sensitive to their layout structures. The impact of the layout on TID effects on pMOS devices is slight and can be neglected.

Cellular manufacturing layout on adding/removing machines

In order to rapidly respond to the complex and mutational market, a new facility layout plan based on cellular manufacturing is proposed, which gives consideration to high efficiency and flexibility. The plan designs two phases of integrated cell layout, i.e., cell construction and cell system layout, on the condition of adding/removing machines. First, in view of the costs of logics and machine-relocation, the cell construction based on the alternative processing routes and intra-cell layout are integrated as a whole, which achieves cell formation, process planning and the intra-cell layout in a single step. Secondly, an approach of a continuous optimized multi-line layout for solving the cell system layout problem is proposed, which eliminates the coupling relationship from the machine-relocation and realizes an integrated design of the two phases of the cell layout. An application based on real factory data is optimally solved by the Matlab 7.0 software to validate and verify the models.

Spatial Layout Art of Chinese Private Gardens

Private garden is one of the three major garden styles in China,the artistic achievements of which have devoted remarkable contributions to the development of global landscape architecture.Through studying the spatial layout of private gardens,the authors further analyzed three ways of landscape layouts,specifically,separated scenery,winding scenery and borrowed scenery.Concrete examples were taken to demonstrate the connotations and application skills of such three layouts,in order to benefit the inheritance and development of traditional Chinese garden art.

集成电路版图(layout)设计方法与实例

首先在理论上介绍了集成电路版图设计方法的详细步骤以及设计规则的特点。并结合一个运算放大器的版图设计实例详细讲解了集成电路版图设计的基本步骤技巧与准则。

Layout在电梯部件设计中的应用

以电梯轿底托架为例,介绍了利用Pro/E的Layout参数表和关系式对电梯部件进行设计应用情况,以达到快速满足客户需求的目的。

基于高职院校PCB Layout职业培训方案的探索

开展职业培训既是高职院校实施校企合作的途径之一,又是高职院校教学改革的催化剂。PCB Layout职业培训方案的提出是基于版图设计企业PCB Layout人才紧缺的背景。本着为社会服务、为企业服务和为学校服务的态度,应使PCB Layout职业培训工作在高职院校进行,并建立一套完整的培训方案,最终由企业的资深工程师给出鉴定结果。

Construction of Tourism Spatial Layout in Huaihua from the Recreational Perspective

With the investigation of the current situation of tourism activities and characteristics of recreational tourism spatial layout in Huaihua,problems in tourism spatial layout are pointed out,that is,indistinct division of tourism functions,comparatively bad relevance in the "point-axle" spatial structure,and comparatively bad horizontal and vertical coherence in tourism space.It is suggested to rationally construct tourism spatial layout in Huaihua City after the model of spatial layered structure of recreational sightseeing,that is,the model of setting Huaihua City as the center,and from the inside out with three layers of recreational island within the city,recreational sites around the city and recreational sites at towns and villages away from the city through the spatial layout of point,axis and plane.