Using Fourier Transform Infrared (FTIR) combined with an adiabatic oxidation test, temperature-programmed oxidation and gas analysis, we studied the changes of active functional groups during low-temperature oxidation...Using Fourier Transform Infrared (FTIR) combined with an adiabatic oxidation test, temperature-programmed oxidation and gas analysis, we studied the changes of active functional groups during low-temperature oxidation of lignite, gas coal, fat coal and anthracite. During slow low-temperature heat accumulation, aliphatic hydrocarbons, such as methyl and methylene, are attacked by oxygen atoms absorbed by pores on coal surfaces, generating unstable solid intermediate carbon-oxygen complexes, which then decompose into gaseous products (CO, CO2) and stable solid complexes. At the accelerated oxidation stage, the stable complexes begin to decompose in large amounts and provided new active sites for further oxidation, while the aliphatic structures gained energy and fell from the benzene rings to produce CxHy and H2.展开更多
In order to efficiently seal air leakages and control spontaneous combustion of coal, solidified foam was developed by adding a certain compound additive to fly coal ash and cement as the main materials. It was prepar...In order to efficiently seal air leakages and control spontaneous combustion of coal, solidified foam was developed by adding a certain compound additive to fly coal ash and cement as the main materials. It was prepared basing on the foaming characteristic through physical and mechanical system. We studied the effects of the different types of foaming agents, the mass ratio of cement to fly ash, and the mass ratio of solid to water and content of cellulose on the performance of solidified foam. The results show that when adding the composite protein, surfactant and cellulose foaming agents. The cement-fly ash ratio of 0.75:1, the water solid ratio as large as 2:1, and the solidified foam with high properties and density of only 516 kg/m 3 and compressive strength of up to 12.68 MPa were prepared. But the initial setting time, identity and compressive strength may be changed by varying the water solid ratio and/or the additives. We theoretically analyzed the influence mechanism of foam density, compressive strength and water solid ratio. The solidified foam is especially suitable for sealing surface leakage channels and filling the goaf with a wide application prospects.展开更多
基金Financial support for this work provided by the National Natural Science Foundation of China (No.50674088) is deeply appreciated
文摘Using Fourier Transform Infrared (FTIR) combined with an adiabatic oxidation test, temperature-programmed oxidation and gas analysis, we studied the changes of active functional groups during low-temperature oxidation of lignite, gas coal, fat coal and anthracite. During slow low-temperature heat accumulation, aliphatic hydrocarbons, such as methyl and methylene, are attacked by oxygen atoms absorbed by pores on coal surfaces, generating unstable solid intermediate carbon-oxygen complexes, which then decompose into gaseous products (CO, CO2) and stable solid complexes. At the accelerated oxidation stage, the stable complexes begin to decompose in large amounts and provided new active sites for further oxidation, while the aliphatic structures gained energy and fell from the benzene rings to produce CxHy and H2.
基金provided by the National Natural Science Foundation of China (No. 50904066)the Program for New Century Excellent Talents in University (No. NCET-09-0729)the National Excellent Doctoral Dissertation Special Fund (No. 2007B53)
文摘In order to efficiently seal air leakages and control spontaneous combustion of coal, solidified foam was developed by adding a certain compound additive to fly coal ash and cement as the main materials. It was prepared basing on the foaming characteristic through physical and mechanical system. We studied the effects of the different types of foaming agents, the mass ratio of cement to fly ash, and the mass ratio of solid to water and content of cellulose on the performance of solidified foam. The results show that when adding the composite protein, surfactant and cellulose foaming agents. The cement-fly ash ratio of 0.75:1, the water solid ratio as large as 2:1, and the solidified foam with high properties and density of only 516 kg/m 3 and compressive strength of up to 12.68 MPa were prepared. But the initial setting time, identity and compressive strength may be changed by varying the water solid ratio and/or the additives. We theoretically analyzed the influence mechanism of foam density, compressive strength and water solid ratio. The solidified foam is especially suitable for sealing surface leakage channels and filling the goaf with a wide application prospects.
