An automatic monitoring method of the 3-D deformation is presented for crustal fault based on laser and machine vision. The laser source and screen are independently set up in the headwall and footwall, the collimated...An automatic monitoring method of the 3-D deformation is presented for crustal fault based on laser and machine vision. The laser source and screen are independently set up in the headwall and footwall, the collimated laser beam creates a circular spot on the screen, meanwhile, the industrial camera captures the tiny deformation of the crustal fault by monitoring the change of the spot position. This method significantly reduces the cost of equipment and labor, provides daily sampling to ensure high continuity of data. A prototype of the automatic monitoring system is developed, and a repeatability test indicates that the error of spot jitter can be minimized by consecutive samples. Meanwhile, the environmental correction model is determined to ensure that environmental changes do not disturb the system. Furthermore, the automatic monitoring system has been applied at the deformation monitoring station(KJX02) of China Beishan underground research laboratory, where continuous deformation monitoring is underway.展开更多
Laser shock peening（LSP） is an innovative surface treatment method,which has been shown to greatly improve the fatigue life of many metallic components.This work investigates surface integrity of TC17 titanium alloy...Laser shock peening（LSP） is an innovative surface treatment method,which has been shown to greatly improve the fatigue life of many metallic components.This work investigates surface integrity of TC17 titanium alloy treated by LSP with innovative square laser spot.Nd：glass laser with duration of 30 ns and spot size of 4 mm×4 mm is applied.The surface morphology and surface residual stress of the TC17 titanium alloy,treated with varying peening parameters such as laser power density and overlapping ratio,have been studied in detail.The results show that laser pulse energy greatly influences surface morphology and surface residual stress around single-spot treated areas,and compressive residual stresses are saturated as laser pulse energy is over 55 J.There are significantly different surface morphologies and residual stress distributions at the overlapped areas with different overlapping ratios.A relative smooth surface is produced with uniform compressive residual stress distribution at an overlapping ratio of 8 %.The experiment of residual stress relaxation is implemented by measuring residual stress at the center of four overlapped spots and by four point bending fatigue test at the frequency of 105 Hz.The compressive residual stresses induced by LSP are found to relax quite slowly under cyclic fatigue loading.展开更多
A visual sensing system was established to monitor the weld pool in laser spot welding. The top-hat and bottom-hat transformation algorithms based on mathematical morphology were used to compensate for non-uniform con...A visual sensing system was established to monitor the weld pool in laser spot welding. The top-hat and bottom-hat transformation algorithms based on mathematical morphology were used to compensate for non-uniform contrast of weld pool edge. Moreover, the canny edge detector was applied to extract the weld paol profile. The edge detected results show that the morphological operation is obviously superior to the traditional contrast enhancement method. In addition, the combination of dilation and erosion was applied to eliminate the irrelevant edge details, and the smooth weld pool edge was acquired. Based on the image processing technology described above, the dynamic process of weld pool diameter during laser spot welding was obtained.展开更多
Laser spot thermography is a novel technique for the detection of surface cracks with a laser to heat sample locally and with an IR camera to record the surface temperature distribution. Common methods to characterize...Laser spot thermography is a novel technique for the detection of surface cracks with a laser to heat sample locally and with an IR camera to record the surface temperature distribution. Common methods to characterize cracks are only suitable for the situation that the laser scanning path is vertical to the crack. But due to the randomness of cracks,when the scanning path is parallel to the crack,surface cracks cannot be detected by these methods. To tackle this problem,a method is presented which is suitable for the situation that the scanning path is parallel to crack. The main idea is to evaluate the crack-caused asymmetries of the surface temperature distribution. The effect of temperature gradient and the maximum scanning interval are analyzed by a 2D simulation. A new crack imaging technique is presented that is based on delayed temperature difference at symmetric points to characterize the crack in the thermal image. Compared well with those obtained by the spatial first derivative method,experimental results are shown to efficiently prove this method.展开更多
Laser shock processing（LSP）,also known as laser peening,is a novel surface treatment technique in the past few years.Compressive residual stresses which imparted by LSP are very important for improving fatigue,corro...Laser shock processing（LSP）,also known as laser peening,is a novel surface treatment technique in the past few years.Compressive residual stresses which imparted by LSP are very important for improving fatigue,corrosion and wea rresistance of metals.Finite element analysis（FEA） simulation using ABAQUS software has been applied to predict residualstresses induced by LSP on Ti-6Al-4V titanium alloy with laser pulse duration 30 ns and water confined ablation mode.The residual stress field generated by different shape laser spots was studied,and the square laser spot is shown the most suitability for avoiding stress lack phenomenon and overlapping LSP.Surface residual stresses and plastically affected depth within single square spot both increased with the increase of laser intensity and laser shock times.Furthermore,compared with circle and ellipse spot,the residual stress distribution in overlapping square spots is very uniform only with small overlapping ratio.LSP with square spot can process advantageous residual stress field,and this technique will be used widely.展开更多
基金supported by Earthquake Sciences Spark Programs of China Earthquake Administration(No.XH22020YA)Science Innovation Fund granted by the First Monitoring and Application Center of China Earthquake Administration(No.FMC202309).
文摘An automatic monitoring method of the 3-D deformation is presented for crustal fault based on laser and machine vision. The laser source and screen are independently set up in the headwall and footwall, the collimated laser beam creates a circular spot on the screen, meanwhile, the industrial camera captures the tiny deformation of the crustal fault by monitoring the change of the spot position. This method significantly reduces the cost of equipment and labor, provides daily sampling to ensure high continuity of data. A prototype of the automatic monitoring system is developed, and a repeatability test indicates that the error of spot jitter can be minimized by consecutive samples. Meanwhile, the environmental correction model is determined to ensure that environmental changes do not disturb the system. Furthermore, the automatic monitoring system has been applied at the deformation monitoring station(KJX02) of China Beishan underground research laboratory, where continuous deformation monitoring is underway.
基金Subject in Advance of General Armament Department(813040405-1)
文摘Laser shock peening（LSP） is an innovative surface treatment method,which has been shown to greatly improve the fatigue life of many metallic components.This work investigates surface integrity of TC17 titanium alloy treated by LSP with innovative square laser spot.Nd：glass laser with duration of 30 ns and spot size of 4 mm×4 mm is applied.The surface morphology and surface residual stress of the TC17 titanium alloy,treated with varying peening parameters such as laser power density and overlapping ratio,have been studied in detail.The results show that laser pulse energy greatly influences surface morphology and surface residual stress around single-spot treated areas,and compressive residual stresses are saturated as laser pulse energy is over 55 J.There are significantly different surface morphologies and residual stress distributions at the overlapped areas with different overlapping ratios.A relative smooth surface is produced with uniform compressive residual stress distribution at an overlapping ratio of 8 %.The experiment of residual stress relaxation is implemented by measuring residual stress at the center of four overlapped spots and by four point bending fatigue test at the frequency of 105 Hz.The compressive residual stresses induced by LSP are found to relax quite slowly under cyclic fatigue loading.
文摘A visual sensing system was established to monitor the weld pool in laser spot welding. The top-hat and bottom-hat transformation algorithms based on mathematical morphology were used to compensate for non-uniform contrast of weld pool edge. Moreover, the canny edge detector was applied to extract the weld paol profile. The edge detected results show that the morphological operation is obviously superior to the traditional contrast enhancement method. In addition, the combination of dilation and erosion was applied to eliminate the irrelevant edge details, and the smooth weld pool edge was acquired. Based on the image processing technology described above, the dynamic process of weld pool diameter during laser spot welding was obtained.
基金supported by the National Key Scientific Instrument and Equipment Development Projects,China(Grant No.2013YQ470767)。
文摘Laser spot thermography is a novel technique for the detection of surface cracks with a laser to heat sample locally and with an IR camera to record the surface temperature distribution. Common methods to characterize cracks are only suitable for the situation that the laser scanning path is vertical to the crack. But due to the randomness of cracks,when the scanning path is parallel to the crack,surface cracks cannot be detected by these methods. To tackle this problem,a method is presented which is suitable for the situation that the scanning path is parallel to crack. The main idea is to evaluate the crack-caused asymmetries of the surface temperature distribution. The effect of temperature gradient and the maximum scanning interval are analyzed by a 2D simulation. A new crack imaging technique is presented that is based on delayed temperature difference at symmetric points to characterize the crack in the thermal image. Compared well with those obtained by the spatial first derivative method,experimental results are shown to efficiently prove this method.
基金Project supported by the Foundation of National Key Laboratory of Science and Technology on Power Beam Processing(Grant No.9140C4505020705)
文摘Laser shock processing（LSP）,also known as laser peening,is a novel surface treatment technique in the past few years.Compressive residual stresses which imparted by LSP are very important for improving fatigue,corrosion and wea rresistance of metals.Finite element analysis（FEA） simulation using ABAQUS software has been applied to predict residualstresses induced by LSP on Ti-6Al-4V titanium alloy with laser pulse duration 30 ns and water confined ablation mode.The residual stress field generated by different shape laser spots was studied,and the square laser spot is shown the most suitability for avoiding stress lack phenomenon and overlapping LSP.Surface residual stresses and plastically affected depth within single square spot both increased with the increase of laser intensity and laser shock times.Furthermore,compared with circle and ellipse spot,the residual stress distribution in overlapping square spots is very uniform only with small overlapping ratio.LSP with square spot can process advantageous residual stress field,and this technique will be used widely.
