Spray cooling has proved its superior heat transfer performance in removing high heat flux for ground applications. However, the dissipation of vapor liquid mixture from the heat sur- face and the closed-loop circulat...Spray cooling has proved its superior heat transfer performance in removing high heat flux for ground applications. However, the dissipation of vapor liquid mixture from the heat sur- face and the closed-loop circulation of the coolant are two challenges in reduced or zero gravity space enviromnents. In this paper, an ejected spray cooling system for space closed-loop application was proposed and the negative pressure in the ejected condenser chamber was applied to sucking the two-phase mixture from the spray chamber. Its ground experimental setup was built and exper- imental investigations on the smooth circle heat surface with a diameter of 5 mm were conducted with distilled water as the coolant spraying from a nozzle of 0.51 mm orifice diameter at the inlet temperatures of 69.2 ℃ and 78.2 ℃ under the conditions of heat flux ranging from 69.76 W/cm2 to 311.45 W/cm2, volume flow through the spray nozzle varying from 11,22 L：h to 15.76 L·h. Work performance of the spray nozzle and heat transfer performance of the spray cooling system were analyzed; results show that this ejected spray cooling system has a good heat transfer performance and provides valid foundation for space closed-loop application in the near future.展开更多
基金supported by the National Natural Science Foundation of China(No.50506003)
文摘Spray cooling has proved its superior heat transfer performance in removing high heat flux for ground applications. However, the dissipation of vapor liquid mixture from the heat sur- face and the closed-loop circulation of the coolant are two challenges in reduced or zero gravity space enviromnents. In this paper, an ejected spray cooling system for space closed-loop application was proposed and the negative pressure in the ejected condenser chamber was applied to sucking the two-phase mixture from the spray chamber. Its ground experimental setup was built and exper- imental investigations on the smooth circle heat surface with a diameter of 5 mm were conducted with distilled water as the coolant spraying from a nozzle of 0.51 mm orifice diameter at the inlet temperatures of 69.2 ℃ and 78.2 ℃ under the conditions of heat flux ranging from 69.76 W/cm2 to 311.45 W/cm2, volume flow through the spray nozzle varying from 11,22 L：h to 15.76 L·h. Work performance of the spray nozzle and heat transfer performance of the spray cooling system were analyzed; results show that this ejected spray cooling system has a good heat transfer performance and provides valid foundation for space closed-loop application in the near future.
