A model for simulating the spray forming process with scanning atomizer was developed.Models for the scanning atomization and the deposition processes were coupled together in order to obtain a new description of the ...A model for simulating the spray forming process with scanning atomizer was developed.Models for the scanning atomization and the deposition processes were coupled together in order to obtain a new description of the spray forming process.The model,which is able to predict the shape of a spray-formed billet prepared with scanning atomizer,was established after analyzing the changes in droplet size and density distribution along the r-axis in the spray cone in scanning atomization.The effects of the two kinds of atomization were compared,showing that the scanning atomization is good for deposition.展开更多
In order to understand the solidification process of an atomized droplet and predict the fraction solidification of droplets with flight distance during spray forming, a numerical model based on the population dynamic...In order to understand the solidification process of an atomized droplet and predict the fraction solidification of droplets with flight distance during spray forming, a numerical model based on the population dynamics approach is developed to describe the microstructure evolution under the common action of the nucleation and growth of grains. The model is coupled with droplets heat transfer controlling equations and solved for AI-4.5 wt pct Cu alloy. It is demonstrated that the numerical results describe the solidification process well.展开更多
Two kinds of high strength-damping aluminum alloys （LZ7） were fabricated by rapid solidification and powder metallurgy （RS-PM） process. One material was extruded to profile aluminum directly and the other was extr...Two kinds of high strength-damping aluminum alloys （LZ7） were fabricated by rapid solidification and powder metallurgy （RS-PM） process. One material was extruded to profile aluminum directly and the other was extruded to bar and then rolled to sheet. The damping capacity over a temperature range of 25-300 ℃was studied with damping mechanical thermal analyzer （DMTA） and the microstructures were investigated by optical microscopy （OM）, scanning electron microscopy （SEM） and transmission electron microscopy （TEM）. The experimental results show that the damping capacity increases with the test temperature elevating. Internal friction value of rolled sheet aluminum is up to 11.5×10^-2 and that of profile aluminum is as high as 6.0×10^-2 and 7.5×10^-2 at 300 ℃, respectively. Microstructure analysis shows the shape of precipitation phase of rolled alloy is more regular and the distribution is more homogeneous than that of profile alloy. Meanwhile, the interface between particulate and matrix of rolled sheet alloy is looser than that of profile alloy. Maybe the differences at interface can explain why damping capacity of rolled sheet alloy is higher than that of profile alloys at high temperature （above 120 ℃）.展开更多
The grain growth behavior of spray-formed Al-70wt.%Si alloys was studied in the semi-solid state. The specimens were isothermally heat-treated at various temperatures between the solidus and liquidus of Al-Si alloys a...The grain growth behavior of spray-formed Al-70wt.%Si alloys was studied in the semi-solid state. The specimens were isothermally heat-treated at various temperatures between the solidus and liquidus of Al-Si alloys and then quenched in water. The microstructure of reheated specimens was characterized using optical and scanning electron microscopies. The isothermal holding experiment was carried out to investigate grain growth behavior as a function of holding time and temperature in the semi-solid state. The coarsening mechanism and the effect of porosity on microstructure were also studied.展开更多
基金This work is financially supported by Program of 863 Project ( No 2006AA03Z114)Programon National Key Laboratory Foundation (No 9140C500101060C50)
文摘A model for simulating the spray forming process with scanning atomizer was developed.Models for the scanning atomization and the deposition processes were coupled together in order to obtain a new description of the spray forming process.The model,which is able to predict the shape of a spray-formed billet prepared with scanning atomizer,was established after analyzing the changes in droplet size and density distribution along the r-axis in the spray cone in scanning atomization.The effects of the two kinds of atomization were compared,showing that the scanning atomization is good for deposition.
文摘In order to understand the solidification process of an atomized droplet and predict the fraction solidification of droplets with flight distance during spray forming, a numerical model based on the population dynamics approach is developed to describe the microstructure evolution under the common action of the nucleation and growth of grains. The model is coupled with droplets heat transfer controlling equations and solved for AI-4.5 wt pct Cu alloy. It is demonstrated that the numerical results describe the solidification process well.
基金Project (50971012) supported by the National Natural Science Foundation of China
文摘Two kinds of high strength-damping aluminum alloys （LZ7） were fabricated by rapid solidification and powder metallurgy （RS-PM） process. One material was extruded to profile aluminum directly and the other was extruded to bar and then rolled to sheet. The damping capacity over a temperature range of 25-300 ℃was studied with damping mechanical thermal analyzer （DMTA） and the microstructures were investigated by optical microscopy （OM）, scanning electron microscopy （SEM） and transmission electron microscopy （TEM）. The experimental results show that the damping capacity increases with the test temperature elevating. Internal friction value of rolled sheet aluminum is up to 11.5×10^-2 and that of profile aluminum is as high as 6.0×10^-2 and 7.5×10^-2 at 300 ℃, respectively. Microstructure analysis shows the shape of precipitation phase of rolled alloy is more regular and the distribution is more homogeneous than that of profile alloy. Meanwhile, the interface between particulate and matrix of rolled sheet alloy is looser than that of profile alloy. Maybe the differences at interface can explain why damping capacity of rolled sheet alloy is higher than that of profile alloys at high temperature （above 120 ℃）.
文摘The grain growth behavior of spray-formed Al-70wt.%Si alloys was studied in the semi-solid state. The specimens were isothermally heat-treated at various temperatures between the solidus and liquidus of Al-Si alloys and then quenched in water. The microstructure of reheated specimens was characterized using optical and scanning electron microscopies. The isothermal holding experiment was carried out to investigate grain growth behavior as a function of holding time and temperature in the semi-solid state. The coarsening mechanism and the effect of porosity on microstructure were also studied.
