Adaptive restarting method for LCC-HVDC based on principle of fault location by current injection

The existing LCC-HVDC transmission project adopts the fixed-time delay restarting method.This method has disadvantages such as non-selectivity,long restart process,and high probability of restart failure.These issues cause a secondary impact on equipment and system power fluctuation.To solve this problem,an adaptive restarting method based on the principle of fault location by current injection is proposed.First,an additional control strategy is proposed to inject a current detection signal.Second,the propagation law of the current signal in the line is analyzed based on the distributed parameter model of transmission line.Finally,a method for identifying fault properties based on the principle of fault location is proposed.The method fully considers the influence of the long-distance transmission line with earth capacitance and overcomes the influence of the increasing effect of the opposite terminal.Simulation results show that the proposed method can accurately identify the fault properties under various complex fault conditions and subsequently realize the adaptive restarting process.

Analysis of influencing factors of excitation parameters for magnetoacoustic tomography with current injection

Magneto-acoustic tomography with current injection(MAT-CI) is a type of hybrid imaging;under the excitation of the static magnetic field, the thermoacoustic effect and the Lorentz force effect will exist at the same time. Therefore,the detected signal is a mixed signal generated by the simultaneous action of the two effects, but the influence of excitation parameters on the two effects is different. In this paper, for objects with different conductivity, the proportion of thermoacoustic signal(TA) and magneto-acoustic signal(MA) in the mixed signal is quantitatively analyzed in terms of three aspects: the magnetic induction intensity, pulse excitation and injection current polarity. Experimental and simulation analyses show that the intensity ratio of MA to TA is not affected when the conductivity varies from 0.1 S/m to 1.5 S/m and other conditions remain unchanged. When the amplitude of the pulse excitation and the strength of the magnetic induction are different, the growth rates of MA and TA are different, which has a significant impact on the proportion of the two signals in the mixed signal. At the same time, due to the Lorentz force effect, MA is affected by the polarity of the injected current and the direction of the static magnetic field. The combination of the static magnetic field and the injected current can not only distinguish the two signals in the mixed signal, but also effectively enhance the intensity of the mixed signal and improve the quality of the reconstructed image.

Research on Open-circuit Fault Tolerant Control of Six-phase Permanent Magnet Synchronous Machine Based on Fifth Harmonic Current Injection

This paper proposes a novel control approach for fault-tolerant control of dual three-phase permanent magnet synchronous motor(PMSM) under one-phase open-circuit fault.A modified six-phase static coordinate transformation matrix and an extended rotating coordinate transformation matrix are investigated considering the influence of the fifth harmonic space on fault-tolerant control. These mathematical models are further analyzed in the fundamental space and the fifth harmonic space after the fault and to eliminate the coupling between the d-q axis voltage equation in the fundamental wave space and the d-q axis voltage equation in the fifth harmonic space, a secondary rotation coordinate transformation matrix is proposed. To achieve the purpose of reducing torque ripple, the fault-tolerant control method proposed in this paper not only takes the minimum copper loss as the constraint condition, but also injects the fifth harmonic current. The experimental result of current and torque is used to verify the accuracy of fault-tolerant control.

Use of Double Differential-mode Current Injection Method Equivalent to High Level Illumination for Susceptibility Testing

To achieve the electric field strength and the induced currents in equivalence in susceptibility tests with the high-level field radiation above 400 MHz,a double differential-mode(DM) current injection method based on directional couplers is proposed.Two cascaded symmetrical directional couplers compose a coupling device to inject the DM currents.When the coupling device is used,two devices are necessary to achieve the equivalence between radiation and injection,i.e.the equivalence between the injected voltages and the field strength,which is linear,regardless of the characteristics of the equipment under test(EUT).The results are verified by experiments using typical coaxial cables and nonlinear devices,where the equivalence between the nonlinear EUT responses induced by radiation and injection at both ends is achieved by using two coupling devices.At a frequency up to 1.75 GHz,the maximal experimental error is only 3.39%.The experimental results confirm the accuracy of the proposed method even both the EUTs work in the nonlinear region.The proposed method is applicable for radiated susceptibility(RS) testing of interconnected systems in the microwave frequency band.

Accurate capacitance-voltage characterization of organic thin films with current injection

To deal with the invalidation of commonly employed series model and parallel model in capacitance-voltage(C-V)characterization of organic thin films when current injection is significant,a three-element equivalent circuit model is proposed.On this basis,the expression of real capacitance in consideration of current injection is theoretically derived by small-signal analysis method.The validity of the proposed equivalent circuit and theoretical expression are verified by a simulating circuit consisting of a capacitor,a diode,and a resistor.Moreover,the accurate C-V characteristic of an organic thin film device is obtained via theoretical correction of the experimental measuring result,and the real capacitance is 35.7%higher than the directly measured capacitance at 5-V bias in the parallel mode.This work strongly demonstrates the necessity to consider current injection in C-V measurement and provides a strategy for accurate C-V characterization experimentally.

Research on the Equivalence Between Double Differential- mode Current Injection and Radiation Test Method

There are the application scope limits for single differential-mode current injection test method, so in order to carry out injection susceptibility test for two-pieces equipment interconnected with both ends of a cable simultaneously, a double differential-mode current in- jection test method (DDMCI) is proposed. The method adopted the equivalence source wave theorem and Baum-Liu-Tesche(BLT) equation as its theory foundation. The equivalent corresponding relation between injection voltage and radiation electric field intensity is derived, and the phase relation between the two injection voltage sources is confirmed. The results indicate that the amplitude and phase of the equivalent injection voltage source is closely related to the S parameter of directional coupling device, the transmission line length, and the source vector in BLT equation, but has nothing to do with the reflection coefficient between the two equipment pieces. Therefore, by choosing the right amplitude and phase of the double injection voltage sources, the DDMCI test is equivalent to the radiation test for two interconnected equipment of a system.

The Forward and Inverse Problem Based on Magneto-Acoustic Tomography with Current Injection

The Magneto-acoustic Tomography with Current Injection (MAT-CI) is a new biological electrical impedance imaging technique that combines Electrical Impedance Tomography (EIT) with Ultrasonic Imaging (UI), which possesses the non-invasive and high-contrast of the EIT and the high-resolution of the UI. The MAT-CI is expected to acquire high quality image and embraces a wide application. Its principle is to put the conductive sample in the Static Magnetic Field(SMF) and inject a time-varying current, during which the SMF and the current interact and generate the Lorentz Force that inspire ultrasonic signal received by the ultrasonic transducers positioned around the sample. And then according to related reconstruction algorithm and ultrasonic signal, electrical conductivity image is obtained. In this paper, a forward problem mathematical model of the MAT-CI has been set up to deduce the theoretical equation of the electromagnetic field and solve the sound source distribution by Green’s function. Secondly, a sound field restoration by Wiener filtering and reconstruction of current density by time-rotating method have deduced the Laplace’s equation that caters to the current density to further acquire the electrical conductivity distribution image of the sample through iteration method. In the end, double-loop coils experiments have been conducted to verify its feasibility.

Effects of Current-Injection on Superconductivity of YBa_2Cu_3O_(7-δ) in La_(0.8)Te_(0.2)MnO_3/YBa_2Cu_3O_(7-δ)Bilayer

La_(0.8)Te_(0.2)MnO_3/YBa_2Cu_3O_(7-δ)(F/S)bilayers were fabricated by electrophoretic technique. The thickness of La_(0.8)Te_(0.2)MnO_3 is ~70 μm, the dimensions of YBa_2Cu_3O_(7-δ) superconductor are 5 mm×10 mm×0.5 mm. The image of cross-sectional profile was measured by scanning electron microscopy (SEM). Standard four-probe method was used for YBa_2Cu_3O_(7-δ) superconducting resistance measurements. Either 1 mA current is injected from S layer to F layer ((+I_(inj))) or from F layer to S layer (-I_(inj)),the normal resistance is lower than that without current injection. The critical transition temperature is higher than that without current injection.

基于滑模谐波控制的PMSM转矩脉动抑制

针对永磁同步电动机工作时由于谐波电流产生的谐波电磁转矩脉动问题,提出了一种基于滑模控制的谐波控制器,以实现在全频域范围内降低PMSM转矩谐波的目的。通过滑模速度谐波控制器提取电动机转速谐波,得到q轴谐波电流期望值,避免了传统谐波输入法中对电动机的提前测定。通过滑模电流谐波控制器得到逆变器输入电压。针对谐波信号变化频率快的特点,设计了一种新型的趋近律函数,同时引入模糊神经网络控制器对趋近律参数进行在线修正,有效提升了滑模控制器的动态品质。仿真结果表明,该方法避免了复杂的数学运算,在不同工况下有效抑制了PMSM谐波电磁转矩脉动。

Rectifier Configurations Based on Harmonic Injecting and Counteracting Principle

On the basis of detailed analysis of a novel harmonic counteracting method which can be used to effectively compensate the supply line harmonic currents of a passive single phase diode bridge rectifier, this paper presents two simpler single phase diode bridge rectifier configurations and their alternatives which can achieve low supply line current THD(total harmonic distortion) too. Moreover, this paper also proposes a few passive hamonic counteracting networks for multi single phase rectifiers which are connected in parallel.

基于信号注入法的电容电流计算方法改进

随着电网容量和密度的增大,系统单相接地时电容电流越来越大,因此准确计算电网电容电流十分必要。该文针对传统信号注入法存在的集中电容模型等效准确性不足、系统自然谐振频率过低、谐振频率搜索时存在偏差且搜索时间过长等问题进行分析与改进。首先,分析传统信号注入法产生的误差,结合中压配电网的频率特性,提出改进的单端口等效模型。然后,人为串联电容,解决谐振频率过低导致的励磁支路分流问题。最后,基于相位比较提出谐振频率的二分搜索法,降低搜索次数。改进的信号注入法计算电网电容误差为9.77%,传统方法误差为27.62%;现场实测电流绝对误差值降低3.65 A,超标率降低40%。改进的信号注入法可以有效降低计算电网电容的误差。

Observation and analysis of halo current in EAST

Plasma in a typically elongated cross-section tokamak （for example, EAST） is inherently unstable against vertical displacement. When plasma loses the vertical position control, it moves downward or upward, leading to disruption, and a large halo current is generated helically in EAST typically in the scrape-off layer. When flowing into the vacuum vessel through in-vessel components, the halo current will give rise to a large J × B force acting on the vessel and the in-vessel components. In EAST VDE experiment, part of the eddy current is measured in halo sensors, due to the large loop voltage. Primary experimental data demonstrate that the halo current first lands on the outer plate and then flows clockwise, and the analysis of the information indicates that the maximum halo current estimated in EAST is about 0.4 times the plasma current and the maximum value of TPF × Ih/Ip0 is 0.65, furthermore Ih/Ipo and TPF × Ih/Ipo tend to increase with the increase of Ip0. The test of the strong gas injection system shows good success in increasing the radiated power, which may be effective in reducing the halo current.

Degradation of the transconductance of a gate-modulated generation current in nMOSFET

The degradation of transconductance （G） of a gate-modulated generation current IGD in a LDD nMOSFET is investigated. The G curve shifts rightward under the single electron-injection-stress （EIS）. The trapped electrons located in the gate oxide over the LDD region （QL） makes the effective drain voltage diminish. Accordingly, the G peak in depletion （GMD） and that in weak inversion （GMw） decrease. It is found that △GMD and △GMw each have a linear relationship with the n-th power of stress time （tn） in a dual-log coordinate： △GMD octn, AGMD octn （n = 0.25）. During the alternate stress, the injected holes neutralize QL induced by the previous EIS. This neutralization makes the effective VD restore to the initial value and then the IGD peak recovers completely. Yet the threshold voltage recovery is incomplete due to the trapped electron located over the channel （Qc）. As a result, GMW only recovers to circa 50% of the initial value after the hole-injection-stress （HIS）. Instead, GMD almost recovers. The relevant mechanisms are given in detail.

Rashba spin-orbit coupling induced rectified currents in monolayer graphene with exchange field and sublattice potential

We investigate the effect of Rashba spin-orbit coupling(RSOC)on photoconductivities of rectified currents in monolayer graphene with exchange field and sublattice potential.The system shows that the photoconductivities of resonant shift and injection current contributions are nonzero,while the photoconductivities of non-resonant shift current contribution are zero.We find that the RSOC induces a warping term,which leads to the nonzero rectified currents.Moreover,the photoconductivities of resonant injection(shift)current contribution are(not)related to the relaxation rate.The similar behavior can be found in other Dirac materials,and our findings provide a way to tune the nonlinear transport properties of Dirac materials.

Development of data acquisition and over-current protection systems for a suppressor-grid current with a neutral-beam ion source

Neutral beam injection is one of the effective auxiliary heating methods in magnetic-confinementfusion experiments. In order to acquire the suppressor-grid current signal and avoid the grid being damaged by overheating, a data acquisition and over-current protection system based on the PXI（PCI e Xtensions for Instrumentation） platform has been developed. The system consists of a current sensor, data acquisition module and over-current protection module. In the data acquisition module,the acquired data of one shot will be transferred in isolation and saved in a data-storage server in a txt file. It can also be recalled using NBWave for future analysis. The over-current protection module contains two modes： remote and local. This gives it the function of setting a threshold voltage remotely and locally, and the forbidden time of over-current protection also can be set by a host PC in remote mode. Experimental results demonstrate that the data acquisition and overcurrent protection system has the advantages of setting forbidden time and isolation transmission.

单级三相谐波电流注入可升降压AC/DC变换器

为适应电动车充电电压宽范围变化需求,本文针对传统充电桩前级整流器拓扑开展研究,提出一种新式单级三相AC/DC变换器。该变换器集成了三相桥式不控整流电路与Cuk模块,为降低输入侧电流谐波分量,选用双向开关管构建谐波电流回馈通路,整体构造成单级式拓扑结构。文章阐述了变换器的电路结构及工作模态,通过建立变换器的等效模型推导出电压增益。变换器通过简单的控制逻辑即可实现正弦输入电流并拥有高功率因数。最后通过搭建变换器数字控制实验平台验证了所提变换器的可行性。

面向中压直流配电网的模块化多电平电池储能系统电荷吞吐量抑制策略

模块化多电平电池储能系统(modular multilevel converter-battery energy storage system,MMC-BESS)中各子模块功率周期性波动,与其相连的电池组充放电状态频繁切换,产生额外的电荷吞吐量,危害电池储能系统寿命。当MMC-BESS用于中压直流配电网时,其交直流侧功率传输情况复杂多变,增大电荷吞吐量的抑制难度。因此,文中针对中压直流配电网中的MMC-BESS,提出一种基于二倍频环流注入的电荷吞吐量抑制策略。首先,构建中压直流配电网中MMC-BESS的数学模型;其次,剖析MMC-BESS电荷吞吐量的产生机理,分析不同运行方式下电荷吞吐量的影响因素;再次,提出基于二倍频环流注入的电荷吞吐量抑制策略,以系统总电荷吞吐量最小为目标,选取不同工况下需注入的最优二倍频环流分量;最后,多种工况下的仿真及实验结果表明,所提方法可有效抑制中压直流配电网中MMC-BESS的电荷吞吐量。

高速比较器与时钟驱动器电源模块电磁敏感性研究

高空电磁脉冲(HEMP)能够对电子器件或系统产生不可忽视的电磁脉冲效应。选取高速比较器与时钟驱动器,采用脉冲电流注入(PCI)的实验方法研究这两种器件电源模块的电磁敏感性。试验结果表明:双指数脉冲电流的上升沿是引起高速比较器与时钟驱动器输出扰动的主要原因,且扰动幅度都受到注入脉冲电流幅值的影响;高速比较器工作在不同电平时电源模块的电磁敏感性不同;高速比较器与时钟驱动器在不同工作频率下会表现出不同的电磁敏感性。研究结果对电子器件或系统的电磁敏感性分析与加固具有一定的指导意义。

级联H桥储能变流器直流侧纹波电流协同抑制方法

H桥模块(单相变流器)作为级联储能变流器的基本单元,其固有功率变换特性会导致直流侧产生大量纹波电流,严重威胁交流侧电能质量和储能电池寿命。文中在全面分析纹波电流产生机理的基础上,提出一种基于串-并联滤波器的级联H桥变流器协同抑制方案,有效提高直流侧电流质量。通过分析无源参数的阻抗特点,给出了双LC滤波器参数配置方案,使所提滤波器既能吸收二倍频纹波电流,又能吸收高频纹波电流。同时,提出一种改进的三次谐波注入法,进一步减小直流侧纹波电流。最后,仿真和实验结果验证了所提方案的有效性。

基于广义二阶积分器的高频脉振电压注入PMSM无位置传感器控制

传统高频脉振电压注入法需要使用多个滤波器滤除杂波信号,会使系统产生延时且估计误差较大,本文提出广义二阶积分器代替滤波器滤除杂波,实现对转速和转子位置估计精度的提高。针对传统高频脉振电压注入法位置观测精度和动态性能较差的问题,采用一种基于广义二阶积分器的速度环和电流环位置误差信息提取方法。采用广义二阶积分器代替位置观测闭环的带通滤波器和低通滤波器,提取电机速度和转子位置信息,简化参数整定过程,提高位置观测精度;同时用2个广义二阶积分器串联取代电流环中的低通滤波器,提取基频电流分量,增加电流环带宽,减小系统延时。仿真和实验结果表明,该方法提高了位置观测精度和系统的动态响应性能。