AASHTO’s guideline for geometric design of highways and similar guidelines require that roadside areas on the inside of horizontal curves be cleared of high objects to provide stopping sight distance. The guidelines ...AASHTO’s guideline for geometric design of highways and similar guidelines require that roadside areas on the inside of horizontal curves be cleared of high objects to provide stopping sight distance. The guidelines have analytical models for determining the extent of clearance, known as the horizontal sightline offset or clearance offset, for simple curves. Researchers in the past have developed analytical models for clearance offsets for spiraled and reverse curves. Very few researchers developed analytical models for available sight distances for compound curves. Still missing are models for horizontal sightline offsets and locations of the offsets for compound curves. The objective of this paper is to present development of analytical models and charts for determining horizontal sightline offsets and their locations for compound curves. The paper considers curves whose component arcs are individually shorter than stopping sight distance. The resulting models and the charts have been verified with accurate values determined using graphical methods. The models and the charts will find application in geometric design of highway compound curves.展开更多
The problem of parametric speed approximation of a rational curve is raised in this paper. Offset curves are widely used in various applications. As for the reason that in most cases the offset curves do not preserve ...The problem of parametric speed approximation of a rational curve is raised in this paper. Offset curves are widely used in various applications. As for the reason that in most cases the offset curves do not preserve the same polynomial or rational polynomial representations, it arouses difficulty in applications. Thus approximation methods have been introduced to solve this problem. In this paper, it has been pointed out that the crux of offset curve approximation lies in the approximation of parametric speed. Based on the Jacobi polynomial approximation theory with endpoints interpolation, an algebraic rational approximation algorithm of offset curve, which preserves the direction of normal, is presented.展开更多
Design guidelines require that high objects on the inside of horizontal curves be cleared so as to provide sufficient sight distance. An example of the guidelines that require such clearance is the AASHTO’s Green Boo...Design guidelines require that high objects on the inside of horizontal curves be cleared so as to provide sufficient sight distance. An example of the guidelines that require such clearance is the AASHTO’s Green Book. The Green Book has an analytical model for determining minimum clearance for a given design sight distance. The model is well suited for middle sections of long curves. Applying such clearance to sections near beginnings and ends of the curves and to sections where there is reverse of curvature will result in over-clearance. Over-clearance implies extra cost of earthwork where highways pass in cut zones. To avoid such extra costs the guideline suggests using the graphical method to determine exact clearance offsets. The graphical method is accurate but it is also tedious and time consuming. This study developed analytical models for efficiently determining clearance offsets that match the offsets determined with the graphical method. The offsets are ordinates from driver paths to flat roadside spirals that make the boundary of the roadside area to clear. Mathematical equations for the spirals comprise of terms related to highway speed (in the form of design sight distance), curve features, and driver locations. In turn, these terms define magnitudes of the offsets to the spirals. Combination of the terms results in many parameters to the extent of making difficult development of design charts for offsets. However, examining suitability of published offset charts for simple curves as estimates of offsets for sites with reverse curves leads to finding that the charts are suitable as long as the reverse curves have common tangents that are at least as long as 25% of design sight distance. For reverse curves with no common tangents, offset charts have been developed and presented in this paper. Practitioners can use these charts or the derived equations to determine clearance offsets for new sites as well as for existing sites that are deficient in design sight distance.展开更多
文摘AASHTO’s guideline for geometric design of highways and similar guidelines require that roadside areas on the inside of horizontal curves be cleared of high objects to provide stopping sight distance. The guidelines have analytical models for determining the extent of clearance, known as the horizontal sightline offset or clearance offset, for simple curves. Researchers in the past have developed analytical models for clearance offsets for spiraled and reverse curves. Very few researchers developed analytical models for available sight distances for compound curves. Still missing are models for horizontal sightline offsets and locations of the offsets for compound curves. The objective of this paper is to present development of analytical models and charts for determining horizontal sightline offsets and their locations for compound curves. The paper considers curves whose component arcs are individually shorter than stopping sight distance. The resulting models and the charts have been verified with accurate values determined using graphical methods. The models and the charts will find application in geometric design of highway compound curves.
基金Project supported by the National Basic Research Program (973) of China (No. 2002CB312101) and the National Natural Science Foun-dation of China (Nos. 60373033 and 60333010)
文摘The problem of parametric speed approximation of a rational curve is raised in this paper. Offset curves are widely used in various applications. As for the reason that in most cases the offset curves do not preserve the same polynomial or rational polynomial representations, it arouses difficulty in applications. Thus approximation methods have been introduced to solve this problem. In this paper, it has been pointed out that the crux of offset curve approximation lies in the approximation of parametric speed. Based on the Jacobi polynomial approximation theory with endpoints interpolation, an algebraic rational approximation algorithm of offset curve, which preserves the direction of normal, is presented.
文摘Design guidelines require that high objects on the inside of horizontal curves be cleared so as to provide sufficient sight distance. An example of the guidelines that require such clearance is the AASHTO’s Green Book. The Green Book has an analytical model for determining minimum clearance for a given design sight distance. The model is well suited for middle sections of long curves. Applying such clearance to sections near beginnings and ends of the curves and to sections where there is reverse of curvature will result in over-clearance. Over-clearance implies extra cost of earthwork where highways pass in cut zones. To avoid such extra costs the guideline suggests using the graphical method to determine exact clearance offsets. The graphical method is accurate but it is also tedious and time consuming. This study developed analytical models for efficiently determining clearance offsets that match the offsets determined with the graphical method. The offsets are ordinates from driver paths to flat roadside spirals that make the boundary of the roadside area to clear. Mathematical equations for the spirals comprise of terms related to highway speed (in the form of design sight distance), curve features, and driver locations. In turn, these terms define magnitudes of the offsets to the spirals. Combination of the terms results in many parameters to the extent of making difficult development of design charts for offsets. However, examining suitability of published offset charts for simple curves as estimates of offsets for sites with reverse curves leads to finding that the charts are suitable as long as the reverse curves have common tangents that are at least as long as 25% of design sight distance. For reverse curves with no common tangents, offset charts have been developed and presented in this paper. Practitioners can use these charts or the derived equations to determine clearance offsets for new sites as well as for existing sites that are deficient in design sight distance.
