Durable K-ion batteries with 100% capacity retention up to 40,000 cycles

Currently,the major challenge in terms of research on K-ion batteries is to ensure that they possess satisfactory cycle stability and specific capacity,especially in terms of the intrinsically sluggish kinetics induced by the large radius of K+ions.Here,we explore high-performance K-ion half/full batteries with high rate capability,high specific capacity,and extremely durable cycle stability based on carbon nanosheets with tailored N dopants,which can alleviate the change of volume,increase electronic conductivity,and enhance the K+ion adsorption.The as-assembled K-ion half-batteries show an excellent rate capability of 468 mA h g^(−1) at 100 mA g^(−1),which is superior to those of most carbon materials reported to date.Moreover,the as-assembled half-cells have an outstanding life span,running 40,000 cycles over 8 months with a specific capacity retention of 100%at a high current density of 2000 mA g^(−1),and the target full cells deliver a high reversible specific capacity of 146 mA h g^(−1) after 2000 cycles over 2 months,with a specific capacity retention of 113%at a high current density of 500 mA g^(−1),both of which are state of the art in the field of K-ion batteries.This study might provide some insights into and potential avenues for exploration of advanced K-ion batteries with durable stability for practical applications.

Seismic stability of reinforced soil walls under bearing capacity failure by pseudo-dynamic method

In order to evaluate the seismic stability of reinforced soil walls against bearing capacity failure,the seismic safety factor of reinforced soil walls was determined by using pseudo-dynamic method,and calculated by considering different parameters,such as horizontal and vertical seismic acceleration coefficients,ratio of reinforcement length to wall height,back fill friction angle,foundation soil friction angle,soil reinforcement interface friction angle and surcharge.The parametric study shows that the seismic safety factor increases by 24-fold when the foundation soil friction angle varies from 25°to 45°,and increases by 2-fold when the soil reinforcement interface friction angle varies from 0 to 30°.That is to say,the bigger values the foundation soil and/or soil reinforcement interface friction angles have,the safer the reinforced soil walls become in the seismic design.The results were also compared with those obtained from pseudo-static method.It is found that there is a higher value of the safety factor by the present work.

Stability Analysis of Space Compcoite Structore and Its Ultimate Bearing Capacity

In this paper, using incremental equilibrium equation, the authors have studiedthe effeet of ultimate bearing capacity of every component on structuralstability, and discussed the stability analysis method for space compositestructures. With the help of the test results for the concrete filled ateel tubeskeleton of the long-spen RC arch bridse, it is proved that the proposed methodis accurate and reliable.

Determination of the load bearing capacity of pre-stressed expandable props for ground support in underground mines

This paper aims to determine the load bearing capacity of pre-stressed expandable props with different geometries and load eccentricities for flexible support in underground mining or excavation.It is deduced that the expandable device could have much higher strength(>89 MPa)by laboratory tests,and the load bearing capacity of the expandable prop may depend on the stability of the supporting steel pipe structure.A good agreement was found between the laboratory test and numerical results in terms of the load bearing capacity and the final macro-bending failure pattern for expandable props with heights of 1.5 and 2.7 m,and the theoretical calculation for the strength of traditional steel structures is not directly suitable for the expandable props.Moreover,additional numerical simulations were performed for the expandable props with different normalized slenderness ratiosλ_(n)and loading eccentric distances e.The variation of stability coefficient of the expandable prop is in line with the Perry-Robertson equation and its correlation coefficients are fitted as a of 0.979 and b of 0.314.For estimating the load bearing capacity of the expandable props,the strength equation for traditional steel structures is improved by introducing a bending magnification factor and by modifying the normalized slenderness ratio to a converted slenderness ratio.Based on the underground field monitoring for the strength of expandable props with different heights,the empirical eccentric distances were back calculated,and a safety factor is introduced to obtain the designed strength of the expandable prop.In addition,a four-step design procedure is proposed for the expandable prop.

Lateral load-carrying capacity analyses of composite shear walls with double steel plates and filled concrete with binding bars

A method is developed to predict the lateral load-carrying capacity of composite shear walls with double steel plates and filled concrete with binding bars(SCBs). Nonlinear finite element models of SCBs were established by using the finite element tool, Abaqus. Tie constraints were used to connect the binding bars and the steel plates. Surface-to-surface contact provided by the Abaqus was used to simulate the interaction between the steel plate and the core concrete. The established models could predict the lateral load-carrying capacity of SCBs with a reasonable degree of accuracy. A calculation method was developed by superposition principle to predict the lateral load-carrying capacity of SCBs for the engineering application. The concrete confined by steel plates and binding bars is under multi-axial compression; therefore, its shear strength was calculated by using the Guo-Wang concrete failure criterion. The shear strength of the steel plates of SCBs was calculated by using the von Mises yielding criterion without considering buckling. Results of the developed method are in good agreement with the testing and finite element results.

Shape design of the reinforcement for bending load-carrying capacity of under-matched butt joint under four-point bending load

To improve the bending load-carrying capacity （ BLCC） of under-matched butt joint under four-point bending load in the elastic stage, the shape design of the reinforcement is studied based on the theoretics of mechanics of materials. The concept, criterion, realization condition and design proposal of equal bending load-carrying capacity （EBLCC） are put forward. The theoretical analysis results have been verified by the finite element method. The simulation results are coincident basically with the ones of theoretical analysis. The research results show that the shape design of the reinforcement of EBLCC can improve BLCC of under-matched butt joint and the unilateral-side type reinforcement can replace double-side symmetry

Using a GIS to Assessment the Load-Carrying Capacity of Soil Case of Berhoum Area, Hodna Basin, (Eastern Algeria)

The concept of load-carrying capacity of the soil can be evaluated by two main components: permissible stress and permissible depth;and therefore, running it begins its assessment that allows an outline of exploitation. Nevertheless, the assessment of the load-carrying capacity made the object of several works of research and many models, based on the multi-criteria analysis, have been established. This work examines the contribution of GIS approach to assessment load-carrying capacity of the soil. This one has been finished in two practicums: 1) Assessment of the capacity of soil by a multi-criteria approach, using the Weighted Sum Model (WSM);2) It brought to use the GIS approach to evaluate and spatialize degree of soil bearing stresses resulting from the buildings, as well as load distribution. The method has been applied to the Berhoum area of Hodna Basin, in eastern Algeria, where each is characterized by its various natural properties and density of equipment. Final results are better in the classification of the degree of load-carrying capacity possible in each site. This results in allowing exploiters to program their optimal designs for the rational management of the area.

A Bio-inspired Mutual-hook Strategy for the Soft Finger to Improve Load-bearing Capacity and Grasping Stability

Soft grippers have great potential applications in daily life,since they can compliantly grasp soft and delicate objects.However,the highly elastic fingers of most soft grippers are prone to separate from each other while grasping objects due to their low stiffness,thus reducing the grasping stability and load-bearing capacity.To tackle this problem,inspired from the venus flytrap plant,this work proposes a mutual-hook mechanism to restrain the separation and improve the grasping performance of soft fingers.The novel soft gripper design consists of three modules,a soft finger-cot,two Soft Hook Actuators(SHAs)and two sliding mechanisms.Here,the soft finger-cot covers on the soft finger,increasing the contact area with the target object,two SHAs are fixed to the left and right sides of the finger-cot,and the sliding mechanisms are designed to make SHAs stretch flexibly.Experiments demonstrate that the proposed design can restrain the separation of soft fingers substantially,and the soft fingers with the finger-cots can grasp objects three times heavier than the soft fingers without the proposed design.The proposed design can provide invaluable insights for soft fingers to restrain the separation while grasping,thus improving the grasping stability and the load-bearing capacity.

Boundary slippage for generating hydrodynamic load-carrying capacity

Boundary slippage is used to generate the load-carrying capacity of the hydrodynamic contact between two parallel plane surfaces. In the fluid inlet zone, the fluidcontact interfacial shear strength on a stationary surface is set at low to generate boundary slippage there, while in the fluid outlet zone the fluid-contact interfacial shear strength on the stationary surface is set at high enough to prevent the occurrence of boundary slippage. The fluid-contact interfacial shear strength on the entire moving surface is set at high enough to prevent boundary slippage on the moving surface. These hydrodynamic contact configurations are analyzed to generate the pronounced load-carrying capacity. The optimum ratio of the outlet zone width to the inlet zone width for the maximum load-carrying capacity of the whole contact is found to be 0.5.

A Discusion on Limited Load-Carrying Capacity of Rectangular Plates

The elastic-plastic method is often used in designing the inner flat bulkhead plates of submarines, and the upper structure of ships and drilling platforms. Such bulkhead plates can bear the load only once. For the improvement of the load-carrying capacity or the reduction of the weight of plates, the yield line analytical method is employed in this paper to design the bulkhead plate to improve economy and increase the effiective load. Besides, a further sutdy of this method has been made theoretically and experimentally, and the data of the limited load-carrying capacity of the plate have been obtained. Furthermore, the safety coefficients for such a method are presented, which can be used as reference for related departments and staffs.

STABILITY OF THE HIGH-ORDER BAM AND ITS PERFORMANCE ANALYSIS

High order bidirectional associative memory (HOBAM) by Tai et al is extension to Kosko′s bidirectional associative memory(BAM). It not only possesses merits of the BAM, but also relaxes the continuity assumption for reliable recalls and significantly improves the storage capacity and error correcting capability of the BAM. However, Tai′s performance analysis for the HOBAM is only limited in the computer simulations, in the other words, they did not give a theoretical analysis result. This paper fills the blank and gives a theoretical proof for HOBAM′s stability and storage capacity analysis so that the system can theoretically ensure all the training pattern pairs to become its stable points.

Facile In Situ Fabrication of Nanostructured Graphene–CuO Hybrid with Hydrogen Sulfide Removal Capacity

A simple and scalable synthetic approach for one-step synthesis of graphene–Cu O(TRGC) nanocomposite by an in situ thermo-annealing method has been developed.Using graphene oxide(GO) and copper hydroxide as a precursors reagent,the reduction of GO and the uniform deposition of in situ formed Cu O nanoparticles on graphene was simultaneously achieved.The method employed no solvents,toxic-reducing agents,or organic modifiers.The resulting nanostructured hybrid exhibited improved H2 S sorption capacity of 1.5 mmol H2S/g-sorbent(3 g S/100 g-sorbent).Due to its highly dispersed sub-20 nm Cu O nanoparticles and large specific surface area,TRGC nanocomposite exhibits tremendous potential for energy and environment applications.

Studies of Thermodynamic Properties and Relative Stability of Polybrominated Xanthones by Density Functional Theory

The thermodynamic properties of xanthone（XTH） and 135 polybrominated xanthones（PBXTHs） in the standard state have been calculated at the B3LYP/6-31G＊ level using Gaussian 03 program.The isodesmic reactions were designed to calculate the standard enthalpy of formation（△fHθ） and standard free energy of formation（△fGθ） of PBXTH congeners.The relations of these thermodynamic parameters with the number and position of Br atom substitution（NPBS） were discussed,and it was found that there exist high correlation between thermodynamic parameters（entropy（Sθ）,△fHθ and △fGθ） and NPBS.According to the relative magnitude of their △fGθ,the relative stability order of PBXTH congeners was theoretically proposed.The relative rate constants of formation reactions of PBXTH congeners were calculated,Moreover,the values of molar heat capacity at constant pressure（Cp,m） from 200 to 1000 K for PBXTH congeners were also calculated,and the temperature dependence relation of them was obtained,suggesting very good relationships between Cp,m and temperature（T,T^1 and T^2） for almost all PBXTH congeners.

Experimental Study on Stability of Breakwaters with Penetrating Box Foundations

The breakwater with top sealed, shallow and wide penetrating box foundations is a new type of structure, applicable to deep water and soft seabed. The relations of horizontal and vertical bearing capacities of the box foundation structure as well as the instability induced failure modes to its dimensions and external loads are discussed through static model tests and wave tests. The mechanical properties of the stability of the box foundation are similar to those of embedded rigid foundations, i.e. the vertical stresses at the bottom of the box are distributed in a linear pattern under the action of vertical loads, and passive and active soil pressures are developed at the front and back sides of the box under the action of horizontal loads; there are two instability induced failure modes of the foundation structure-horizontal slide along the box base and tilting due to insufficient local vertical bearing capacity of the soil beneath the box base. The stability of box foundations can be analyzed by use of the methods applied to analysis of the embedded rigid foundations. To increase the width of the box is the most effective way to improve the stability of box foundations.

Reliability and sensitivity analysis of loop-designed security and stability control system in interconnected power systems

Security and stability control system(SSCS)in power systems involves collecting information and sending the decision from/to control stations at different layers;the tree structure of the SSCS requires more levels.Failure of a station or channel can cause all the execution stations(EXs)to be out of control.The randomness of the controllable capacity of the EXs increases the difficulty of the reliability evaluation of the SSCS.In this study,the loop designed SSCS and reliability analysis are examined for the interconnected systems.The uncertainty analysis of the controllable capacity based on the evidence theory for the SSCS is proposed.The bidirectional and loop channels are introduced to reduce the layers and stations of the existing SSCS with tree configuration.The reliability evaluation and sensitivity analysis are proposed to quantify the controllability and vulnerable components for the SSCS in different configurations.By aiming at the randomness of the controllable capacity of the EXs,the uncertainty analysis of the controllable capacity of the SSCS based on the evidence theory is proposed to quantify the probability of the SSCS for balancing the active power deficiency of the grid.

Evaluation of survival stow position and stability analysis for heliostat under strong wind

Heliostats are sensitive to the wind load, thus as a key indicator, the study on the static and dynamic stability bearing capacity for heliostats is very important. In this work, a numerical wind tunnel was established to calculate the wind load coefficients in various survival stow positions. In order to explore the best survival stow position for the heliostat under the strong wind, eigenvalue buckling analysis method was introduced to predict the critical wind load theoretically. Considering the impact of the nonlinearity and initial geometrical imperfection, the nonlinear post-buckling behaviors of the heliostat were investigated by load-displacement curves in the full equilibrium process. Eventually, combining B-R criterion with equivalent displacement principle the dynamic critical wind speed and load amplitude coefficient were evaluated. The results show that the determination for the best survival stow position is too hasty just by the wind load coefficients. The geometric nonlinearity has a great effect on the stability bearing capacity of the heliostat, while the effects of the material nonlinearity and initial geometrical imperfection are relatively small. And the heliostat is insensitive to the initial geometrical imperfection. In addition, the heliostat has the highest safety factor for wind-resistant performance in the stow position of 90-90 which can be taken as the best survival stow position. In this case, the extreme survival wind speeds for the static and dynamic stability are 150 m/s and 36 m/s, respectively.

Spatially resolved micron-scale wrinkle structures at asphaltene films induced by mild thermal treatment and its impact on emulsion stability

Mild thermal treatment is an important partial upgrading technique to enable bitumen pipeline transportation,but no attention has been paid to the impact of mild thermal treatment on the emulsification behavior of emerging partially upgraded bitumen.Asphaltene compounds are active emulsion stabilizers in bitumen oil.The emulsion stabilizing capacity of bitumen asphaltenes was investigated,before and after a mild thermal treatment at 400℃.The structural morphology and mechanical property of the asphaltene interfacial films were analyzed by using a combination of cryo-SEM,Langmuir trough,and Brewster angle microscopy.The thermal treatment significantly enhanced the emulsion stabilizing capacity of bitumen asphaltenes;the interfacial films formed by the thermally treated asphaltene samples appeared to be rougher and thicker with more abundant micron-scale wrinkle structures.The interfacial corrugation may intensify the mechanical stability/flexibility of the asphaltene films and consequently strengthen the stability of emulsion droplet.

Effects of Layer Change and Chemical Composition on Thermal Stability and Catalytic Activity of Pillared Montmorillonite

ＥｆｅｃｔｓｏｆＬａｙｅｒＣｈａｎｇｅａｎｄＣｈｅｍｉｃａｌＣｏｍｐｏｓｉｔｉｏｎｏｎＴｈｅｒｍａｌＳｔａｂｉｌｉｔｙａｎｄＣａｔａｌｙｔｉｃＡｃｔｉｖｉｔｙｏｆＰｉｌａｒｅｄＭｏｎｔｍｏｒｉｌｏｎｉｔｅＬｉａｏＨｕｉｓｈｅｎｇ，ＨｅＭｉｎｇｙｕａｎ...

Delay-dependent asymptotic stability of mobile ad-hoc networks:A descriptor system approach

In order to analyze the capacity stability of the time-varying-propagation and delay-dependent of mobile ad-hoc networks （MANETs）, in this paper, a novel approach is proposed to explore the capacity asymptotic stability for the delay- dependent of MANETs based on non-cooperative game theory, where the delay-dependent conditions are explicitly taken into consideration. This approach is based on the Lyapunov-Krasovskii stability theory for functional differential equations and the linear matrix inequality （LMI） technique. A corresponding Lyapunov-Krasovskii functional is introduced for the stability analysis of this system with use of the descriptor and ＂neutral-type＂ model transformation without producing any additional dynamics. The delay-dependent stability criteria are derived for this system. Conditions are given in terms of linear matrix inequalities, and for the first time referred to neutral systems with the time-varying propagation and delay- dependent stability for capacity analysis of MANETs. The proposed criteria are less conservative since they are based on an equivalent model transformation. Furthermore, we also provide an effective and efficient iterative algorithm to solve the constrained stability control model. Simulation experiments have verified the effectiveness and efficiency of our algorithm.

Research on Acidic Stability of Immobilized Heavy Metals in Sediment from Polluted River

The heavy metals can accumulate in sediment after discharged into surface water bodies. Before the sediment can be further landfilled or recycled,a large amount of heavy metal in it needs to be treated,known as solidification/stabilization. The properties of treated sediment may change with environment such as acid rain and landfill time,which may lead to the release of heavy metals from treated sediment into environment,posing great risks to environment and human health. In this study,the quantitative relationship has been tested between the dissolution of heavy metals from treated sediment and the p H of the leaching solution,by changing the p H of the treated sediment-leaching solution continuously. The results showed that when the p H of the treated sediment-leaching solution was higher than 5. 5,the heavy metals released from the treated sediment into solution were relatively low;when the p H of the treated sediment-leaching solution dropped to about 5. 5,a large amount of Cu,Zn,Ni and other heavy metals were released. The solidification of Cu,Zn,Cr and Cd in the treated sediment is relatively stable,while that of Ni and Pb still need to be improved. The buffer capacity of the treated sediment to acid is 0. 999 meq/g,which means it has relatively high capacity to buffer the pH change caused by external acid.