Study on high and steep slope stability of surface mine based on RFPA-SRM

The instability and failure mechanism of high and steep slopes in surface mines, and the basis for some reasonable landslide prevention measures were provided using the RFPA-SRM. Based on the actual progress of the Pingzhuang Western Surface Mine and based on strength reduction method, the dynamic instability processes of the top high and steep slope was simulated. Also, the landslide mode was determined, the characteristics of the displacement distribution, the deformation, failure, and the stress distribution in the slope were demonstrated, and the stability was calculated. Conclusions can be drawn as follows： the landslide or failure of high and steep slopes on a surface mine is a gradual process, in which the slope undergoes the generation, expansion, and connection of the fractures and the displacement increases until landslide occurs; a small portion of the upper rocks fail due to the tension and the lower rocks fail due to the shear; the potential sliding surface is combined and the essential cause of the landslide is the shear stress concentration.

Stability of loess high-fill slope based on monitored soil moisture changes

This paper aims to assess the influence of moisture content changes during rainfall on the stability of loess high-fill slopes by taking a loess high-fill slope in Lanzhou City as an example.First,according to the moisture content monitoring data collected from a slope online monitoring system,direct shear tests were performed on soil samples of different moisture content to determine the relationship between the shear strength parameters and moisture content.Next,a coupled hydro-mechanical model with soil shear strength related to moisture content was established and used to analyze 16 working conditions with various rainfall intensities and durations for two cases:shear strength parameters from the site exploration report and those from this study.Finally,the results from the two cases were compared regarding the changes in stresses and displacements after rainfall infiltration to analyze the influence of moisture content on the stability of loess high-fill slopes.The conclusions are as follows:(1)Segmental relationship equations of cohesion and angle of internal friction were established for loess with various moisture content.(2)Under the conditions of different rainfall intensities,significant differences were observed in the trends of slope stress and displacement changes.(3)The slope displacement occurred in the shallow soil layer within about 12.5 m from the slope top,and the plastic strain concentrated in the soil layer within about 6 m from the slope top.(4)The results of slope stability analyses based on moisture content monitoring data are more in line with the observed.

Deformation and failure of a high-steep slope induced by multi-layer coal mining

During underground mining,accurate revelation on the deformation and failure mechanisms of a high-steep slope under multi-layer mining conditions facilitates the prevention and control of geological disasters in mines.Numerical simulation based on discrete element theory can be used to explore the characteristics and mechanism of action of deformation and failure of a slope under complex geological and multi-layer mining conditions.By utilising PFC2 D(particle flow code) software,the deformation and failure characteristics of a high-steep slope in Faer Coal Mine in Guizhou Province,China were investigated.Additionally,the mechanism of influence of different numbers of mining layers on the deformation and failure of the high and steep slope was elucidated.The result showed that after the goaf passed by the slope toe,multi-layer mining aggravated the subsidence and deformation of the slope toe:the slope toppled forward as it sank.The toppling of the slope changed the slope structures:the strata in the front of the slope were transformed from anti-dip to down-dip features.Extruded by collapsedtoppled rock mass,the slope toe and the rock mass located in the lower part of the slope toe generally exhibited a locking effect on the slope.Multi-layer mining degraded the overall stability of the slope,in that the total displacement of the slope was much greater than the total mining thickness of the coal seams.Based on the aforementioned research,ideas for preventing and controlling geological disasters during mining operations under a high-steep slope were proposed.

Research on Deformation and Force of Bridge Pile Foundation on High and Steep Slope in Mountainous Area

With the rapid development of my country’s economy, the demand for infrastructure construction is also increasing. However, in most areas of China, the terrains are mountainous and hilly. Some projects have to be built on steep slopes. Choosing viaducts or half-bridges on high-steep slopes is not only conducive to the protection of the surrounding environment, but also conducive to the stability of the slope. Bridges usually choose the form of pile foundation-high pier bridge. This paper uses numerical simulation to study and analyze the bridge pile foundation of the slope section. Relying on actual engineering, use the finite element software ABAQUS6.14 to establish a three-dimensional finite element model to study the bearing mechanism and mechanical characteristics of the pile foundation under vertical load, horizontal load and inclined load, discuss the influence of the nature of the soil around the pile and the stiffness of the pile body on the deformation and internal force of the bridge pile foundation in the slope section. The analysis results show that the horizontal load has a great influence on the horizontal displacement of the pile, but has a small influence on the vertical displacement, and the vertical load is just the opposite. Inclined load has obvious “p-Δ” effect. The increase in soil elastic modulus and pile stiffness will reduce the displacement of the pile foundation, but after reaching a certain range, the displacement of the pile foundation will tend to be stable. Therefore, in actual engineering, if the displacement of the pile foundation fails to meet the requirements, the hardness of the soil and the stiffness of the pile can be appropriately increased, but not blindly.

The Application of High-density Resistivity Method to the Evaluation on the Stability of Gongchangling Open Pit＇s Slope

High-density resistivity method is a new, efficient electrical prospecting method, which can complete a two-dimensional （vertical and horizontal） prospecting process, possesses certain imaging functions for the geo-electric structure, and integrates electric profiling method with electric sounding method together. In this paper, the basic principle, data processing, and result explanation and inference of high- density resistivity method are introduced by taking the application of high-density resistivity method to the prospecting project in the slope of Gongchangling Open Pit, Liaoyang. The result of the prospecting result map analysis showed that the prospecting result was basically in line with the actual situation and proved the great significance of high-density resistivity method to the evaluation on the slope stability of Gongchangling open pit.

Application of Three-Dimensional Laser Scanning and Surveying in Geological Investigation of High Rock Slope

The appearance of 3D laser scanning technology is one of the most important technology revolutions in surveying and mapping field. It can be widely used in many interrelated fields, such as engineering constructions and 3D measurements, owing to its prominent characteristics of the high efficiency and high precision. At present its application is still in the initial state, and it is quite rarely used in China, especially in geotechnical engineering and geological engineering fields. Starting with a general introduction of 3D laser scanning technology, this article studies how to apply the technology to high rock slope investigations. By way of a case study, principles and methods of quick slope documentation and occurrence measurement of discontinuities are discussed and analyzed. Analysis results show that the application of 3D laser scanning technology to geotechnical and geological engineering has a great prospect and value.

Deformation Mechanism and Stability of a Rocky Slope

A high slope is located on the side of the spillway at a hydropower station in Southwest China, which has some weak inter-layers inclining outwards. Parts of the slope show heavy weathering and unloading. There appeared deformation and tensile crack either on the surface or on the afteredge of the slope during excavation, and under a platform （elev. 488 m）, two levels of slopes collapsed on the downriver side. Based on the investigation in situ and the analysis of the geological structure, the conceptual model of deformation and failure mechanism was erected for this slope. Furthermore, the deformation characteristics were studied with FLAC^3D numerical simulation. Comprehensive analysis shows that the whole deformation of the slope is unloading rebound in certain depth scope and the whole body does not slide along any weak interlayer. In addition, two parts with prominent local deformation in the shallow layer of the slope show the models of ＂creep sfiding-tensile cracking＂ and ＂slidlng-tensile cracking＂, respectively. Based on the above analysis, the corresponding project of support and reinforcement is proposed to make the slope more stable.

Finite element analysis of steep excavation slope failure by CFS theory

The distribution of Coulomb failure stress （CFS） change in the steep excavation slope is calculated by finite element method in this paper, and the failure mechanics under different conditions have been investigated. Comparing the CFSs before and after the slope excavation （stress loading and unloading processes）, the dangerous internal zone and the most likely failure external area are attained. Given the shear cracks on the top surface while tensile stress or cracks along the toe of the slope, we analyze the high cutting-angle steep slope in Kaixian county of the Three Gorges Reservoir region. We bring forward that the peak value of CFS after excavation can reach to the order of 0.1 MPa, which is greatly higher than that of before. Our preliminary results are useful for optimizing the reinforcement structure during the steep slope stabilization engineering.

Slope stability FEM analysis and retaining wall design:a case study of clinker in Benxi of Liaoning

Stability is always the most important problem after high slope was excavated.The study analyzed the stress and strain inside the slope by Finite Element Method(FEM) and carried through stress distribution and failure zone,then analyzed the stability of the slope using three different methods and came to the conclusion that it is in unstable condition,so the designed retaining wall was put forward which makes the slope stable.

Probabilistic analysis of embankment slope stability in frozen ground regions based on random finite element method

Prediction on the coupled thermal-hydraulic fields of embankment and cutting slopes is essential to the assessment on evolution of melting zone and natural permafrost table, which is usually a key factor for permafrost embankment design in frozen ground regions. The prediction may be further complicated due to the inherent uncertainties of material properties. Hence, stochastic analyses should be conducted. Firstly, Karhunen-Loeve expansion is applied to attain the random fields for hydraulic and thermal conductions. Next, the mixed-form modified Richards equation for mass transfer （i.e., mass equation） and the heat transport equation for heat transient flow in a variably saturated frozen soil are combined into one equation with temperature unknown. Furthermore, the finite element formulation for the coupled thermal-hydraulic fields is derived. Based on the random fields, the stochastic finite element analyses on stability of embankment are carried out. Numerical results show that stochastic analyses of embankment stability may provide a more rational picture for the distribution of factors of safety （FOS）, which is definitely useful for embankment design in frozen ground regions.

Stability analysis of new safety cleaning bank in steep slope mining

Based on the study of the slope with gently granular structure in Xingqiao open mine, a new safety cleaning bank mode for steep slope mining was developed, including setting up dint cut, and forming natural retaining wall based on the character of gentle incline slope. It can effectively eliminate the impact of sliding body on the bottom working place and slope body, reduce the dilution of ore, keep rainwater from upper steps away, decrease influence of the weak intermediate layer, and cut cost of disposal waste rock. The safety and reliability of the mode were analyzed and verified from 3 aspects: static load calculation, ANSYS simulation of dynamic loading and spot experiment. The result of static loading calculation shows that the retaining wall can support accumulation and extrusion of granular body, and the glide or overturn disaster will not take place. The simulations of dynamic loading show that the retaining wall remains stable until sliding body collapses from 360 m (10 sublevels). Only one new safety cleaning bank in each 15 sublevels can fully meet the need of engineering. The new mode sustains steep slope (mining,) increases the angle of ultimate slope, and reduces invalid overburden amount of rock by 3%5%. The result of spot experiment has verified the exactness of the above calculations and simulations.

Research on Effect of Heap Loading on Deformation and Mechanical Properties of Bridge Double Pile Foundation on Steep Slope

In order to analyze the deformation and stress characteristics of the pile foundation on the slope, this paper uses the finite element software Abaqus for numerical simulation. The displacement and stress data of pile under different working conditions (the combination of heap load and vertical load and horizontal load and inclined load) were collected;the distribution of pile displacement, axial force and bending moment were analyzed. Simulation results show that: slope top loading has little effect on vertical displacement; when the heap load exceeds 200 kPa, the horizontal displacement is greatly affected. Pile axial force decreases with pile burial depth;pile lateral resistance plays a more adequate role in the rock and soil layer. The bending moment of double pile foundation is positive at the top and negative at the bottom. Applied oblique load has obvious p-Δ effect.

GIS-based 3D limit equilibrium analysis for design optimization of a 600 m high slope in an open pit mine

Combining the GIS （geographic information systems） grid-based data with four proposed column-based 3D slope stability analysis models, a comprehensive solution of a high-steep open-pit slope has been obtained. For six searching ranges, 19 critical slip surfaces of different sizes have been studied, in which the minimum 3D safety factor is 1.33. Comparison of 3D safety factors of designed and proposed slope plans shows for all the critical slip surfaces for the proposed plan, the smallest 3D safety factor is 1.33 under the most unfavorable condition. This means that the proposed plan of the high slopes, about 600 m, of an open pit （2-5° steeper than designed plan） is feasible.

Simulation analysis of construction process of high rock slope's stabilization

A self-developed elasto-plastic finite element program was used to analyze the construction sequence of high rock slope's stabilization in a coal-coking plant, and the result was compared with that employing the ultimate equilibrium method. Based on the results of finite element analysis, the stress contour graphs and displacement vector graphs at different construction steps were obtained, and the behavior of the slope during stabilization construction process was analyzed quantitatively. Based on the analysis of safety factors of three different schemes of stabilization and two different construction schemes, the assessment of stability and bracing design of the construction process were performed. The results show that the original reinforcement design is improper; the stability of the rock slope is controlled by a developed structural plane, the stability factor after excavation is less than 1, and the free surface should be braced in time; for stability, the construction sequence should adopt that bracing follows excavation step by step up to down; the local slide occurred during the construction process agrees with the dangerous slide determined by the numerical analysis, which proves the validity and rationality of the adopted method.

Buckling failure analysis and numerical manifold method simulation forhigh and steep slope: A case study

Buckling failure of layered rock slopes due to self-weight is common in mountain areas, especially for high andsteep slope, and it frequently results in serious disasters. Previous research has focused on qualitatively evaluatingslope buckling stability and rarely studied the whole process from bending deformation to forming landslide. Inthis work, considering the tensile and compressive characteristics of rock, the simulation of high and steep slopebucking failure evolved in Bawang Mountain, was conducted by numerical manifold method. The bucklingdeformation mechanism and progressive failure process of Bawang Mountain high steep slope were studied. Thereliability of the numerical method was verified by the comparison of theoretical calculation and field measurement data. The results show that numerical manifold method can accurately simulate high and steep slopebuckling failure process by preforming interlayer and cross joints. The process of slope buckling deformation andinstability failure can be divided into minor sliding-creep deformation, interlayer dislocation-slight bending,traction by slope toe-sharp uplift, accelerated sliding-landslide formation. Under the long-term action of selfweight, the evolution of slope buckling from formation to landslide is a progressive failure process, whichmainly contains three stages: slight bending deformation, intense uplift deformation and landslide formation.

Key issues in rock mechanics of the Three Gorges Project in China

The Three Gorges Project is one of the essential key projects for flood controlling and water resources regulation in the Yangtze River. The project includes a river-crossing dam, underground powerhouses, and navigation structures. Because of the huge size and complicated construction technologies, the project faced a series of challenging engineering issues. In terms of rock mechanics, there are many key technical issues, including the sliding resistance and stability of the dam section along the foundations of powerhouses No.l-5, the ,,;lope stability of the double-line five-stage shiplock, excavation of large-scale underground powerhouses, and curtain grouting under the dam. With decades of scientific research and 16 years of practical construction experiences and reservoir operations, these key technical issues in construction of the Three Gorges Project are successfully resolved, which will attribute to the development of hydropower technology. On the basis of the monitoring data during construction and normal operation periods of the Three Gorges Project, this paper presents a systematic analysis of these key rock mechanical issues in terms of behaviors, solutions, dynamic controlling, monitoring arrangement and integrated assessment.

Impact of a Low Severity Fire on Soil Organic Carbon and Nitrogen Characteristics in Japanese Cedar Soil, Yamagata Prefecture, Japan

Slash and burn practices are widely used around the globe with different degrees of success which are mostly related to the impact of fire on soil properties. In Japan slash and burn practises, known as Yakihata, have a long history and are still used in Yamagata Prefecture today. The purpose of this study was to determine the impact of a low severity controlled fire underneath Japanese cedar (Cryptomeria japonica) on brown forest soil (Cambisol). Japanese Cedar is the dominant species among plantations in Japan. We measured organic carbon and nitrogen content as well as changes in carbon (δ13C) and nitrogen (δ15N) stable isotope composition in a steep west facing slope under heavy precipitation (~2600 mm/a) and heavy snowfall (~3 to 4 m/a). The accumulation of Ctotal and Ntotal at the bottom of the slopes was remarkably higher at the slash and burned site than in the control forest site. After slash and burn δ15N isotopes in the slope in general became significantly lighter than in the control forest while the δ13C did not show any significant difference between the two sites except at the bottom of the slopes where δ13C was heavier in the forest. The results show that Ctotal and Ntotal values as well as the isotopes ratios of C and N change with decreasing elevation in the forest as well as in the burned site being consistent with leaching and erosion. The changes in soil nitrogen and carbon isotopes at the bottom of the slope appear to be related to the transport of material with different isotopic composition from the upper slope. The effect of the low severity fire (as part of the slash and burn practice) on soil organic carbon and nitrogen movement was enhanced by the steepness of the slopes and the high precipitation of Shonai region.

石灰石露天矿高陡边坡稳定性计算分析

以西南某石灰石矿高陡边坡为研究对象,根据矿山边坡现状、边坡岩体结构和结构面发育特征因素对“现状边坡”和“终了边坡”进行地质分区,通过岩石室内物理力学试验获得坡体岩石物理力学参数,采用GSI法计算边坡岩体内摩擦角、粘聚力、变形模量和泊松比等参数,评估边坡地质强度特性,采用Morgenstern-Price极限平衡法分三种荷载工况分别计算“现状边坡”和“终了边坡”各分区稳定性系数。经分析,该石灰石矿各地质分区“现状边坡”和“终了边坡”稳定性好,采场边坡参数设计合理,可为矿山扩产安全设施设计和安全生产提供参考。

复杂地质条件下多级高边坡组合支护方案与稳定性预测研究

以镇赫高速陈贝屯至煤灰堡段为例,根据工程地质、边坡等级和边坡特性等因素对边坡不同剖面采用衡重式挡墙、俯斜式挡墙、桩+锚索、锚杆+面板等支护形式。从病害原因分析和处治手段出发,研究了多级高边坡支护的质量保证措施。基于LightGBM算法建立边坡稳定性预测模型,验证模型精确性后给出预测模型的特征相对重要性结果和预测结果。结果表明:建立预测模型可较好地预测边坡稳定性;影响边坡稳定性最关键的因素为中土体粘聚力,其次为边坡角β,孔隙压力比和土体重度对边坡稳定性影响不大;镇赫高速K2+051~K2+340段边坡稳定概率为0.9,失稳概率为0.1。本项目运营经验表明,组合支护方案及质量保障措施有效提高了项目施工质量、减少了返工现象,保证了项目的经济效益。