Efficient placement technology of proppants based on structural stabilizers

Fiber is highly escapable in conventional slickwater,making it difficult to form fiber-proppant agglomerate with proppant and exhibit limited effectiveness.To solve these problems,a novel structure stabilizer(SS)is developed.Through microscopic structural observations and performance evaluations in indoor experiments,the mechanism of proppant placement under the action of the SS and the effects of the SS on proppant placement dimensions and fracture conductivity were elucidated.The SS facilitates the formation of robust fiber-proppant agglomerates by polymer,fiber,and quartz sand.Compared to bare proppants,these agglomerates exhibit reduced density,increased volume,and enlarged contact area with the fluid during settlement,leading to heightened buoyancy and drag forces,ultimately resulting in slower settling velocities and enhanced transportability into deeper regions of the fracture.Co-injecting the fiber and the SS alongside the proppant into the reservoir effectively reduces the fiber escape rate,increases the proppant volume in the slickwater,and boosts the proppant placement height,conveyance distance and fracture conductivity,while also decreasing the proppant backflow.Experimental results indicate an optimal SS mass fraction of 0.3%.The application of this SS in over 80 wells targeting tight gas,shale oil,and shale gas reservoirs has substantiated its strong adaptability and general suitability for meeting the production enhancement,cost reduction,and sand control requirements of such wells.

Improved dissolution and oral absorption by co-grinding active drug probucol and ternary stabilizers mixtures with planetary beads-milling method

The objective of this work is to construct a nanosuspension drug delivery system of probucol,a BCS II drug,in order to improve its dissolution and oral bioavailability.The wet milling procedure using planetary beads-milling equipment was utilized to grind the raw probucol to ultrafine nanoparticle/nanocrystal aqueous suspension that was further solidified by freeze-drying process.Cellulose derivatives of different substitution groups and molecular weights,including HPMC,HPC,and MC,were evaluated as the primary stabilizer of probucol nanosuspension.Ternary stabilizers system composed of a primary stabilizer(cellulose derivative,i.e.HPC),a nonionic surfactant(Pluronic R F68),and an anionic surfactant(SDS)was employed to obtain probucol nanosuspension of finer particle size and enhanced dissolution in aqueous media.The probucol nanosuspension with good physical stability showed no obvious change of particle size even after storing over 7 d at 4°C or 25°C.The solidified probucol nanosuspension with trehalose as the cryoprotectant showed the highest dissolution rate(>60%at 2 h)compared to other cryoprotectant.The in vivo pharmacokinetic evaluation indicated about 15-folds higher AUC value of the probucol nanosuspension compared to that of coarse probucol suspension after oral administration to rats.The probucol nanosuspension prepared by wet-milling and ternary stabilizers system may find wide applications for improving the dissolution and oral absorption of water-insoluble drugs.

Lift fin stabilizers based on data fusion with wavelet denoising technology

Fin stabilizers with fin-lift feedback control can shield the mapping error of calculation between the fin angle and fin lift force,which is in the fin stabilizer with fin-angle feedback control.In practice,there are some technical difficulties in lift fin stabilizers,such as lift force detection and lift force sensor installation,so it cannot achieve the good antirolling performance.Therefore,a fin stabilizer system with fin-lift/fin-angle integrated control is brought forward.Data fusion based on wavelet denoising technology is employed in the system,which combines lift with fin angle local information from two sensors with different frequency ranges in order to eliminate redundant and contradictory information,and using complementary information to obtain the relative integrity of the lift force signal.The system model is established in this paper,and the fusion signal and the antirolling performance of this model are simulated respectively.The result shows that the control system can meet the antirolling need in different sea situations.

Roles of effective stabilizers in improving oral bioavailability of naringenin nanocrystals:Maintenance of supersaturation generated upon dissolution by inhibition of drug dimerization

Nanocrystals(NCs),a colloidal dispersion system formulated with stabilizers,have attracted widespread interest due to their ability to effectively improve the oral bioavailability of poorly water-soluble drugs.The stabilizer plays a key role because it can affect the physical stability and even the oral bioavailability of NCs.However,how stabilizers affect the bioavailability of NCs remains unknown.In this study,F68,F127,HPMC,and PVP were each used as a stabilizer to formulate naringenin NCs.The NCs formulated with PVP exhibited excellent release behaviors,cellular uptake,permeability,oral bioavailability,and anti-inflammatory effects.The underlying mechanism is that PVP effectively inhibits the formation of naringenin dimer,which in turn improves the physical stability of the supersaturated solution generated when NC is dissolved.This finding provides insights into the effects of stabilizers on the in vivo performances of NCs and supplies valuable knowledge for the development of poorly water-soluble drugs.

Optimal and Robust Power System Stabilizers in a Multi Machine System

One method for eliminating oscillations in power systems is using stabilizers.By applying an appropriate control signal in the excitation system of a generator,a power system stabilizer improves the dynamic stability of power systems.However,the issue that is of high importance is the correct design of these stabilizers.These stabilizers must be designed to have proper performance when operating conditions change.When designed incorrectly,not only they do not improve the stability margin,but also increase the oscillations.In this paper,the robust design of power system stabilizers on a four-machine power system has been performed.For this purpose,the differential evolution algorithm has been used.The studies have been repeated as three scenarios by producing different loading conditions for the generators.The performances of the conventional stabilizer and the optimized one have been compared.Simulation results indicate that the designed robust stabilizer outperforms other stabilizers in different conditions and has damped the interarea and intra-area oscillation modes in the shortest time with minimum amplitude.

Double-dot interferometer for quantum measurement of Majorana qubits and stabilizers

Motivated by the need of quantum measurement of Majorana qubits and surface-code stabilizers, we analyze the performance of a double-dot interferometer under the influence of environment noise. The double-dot setup design allows accounting for the full multiple tunneling process between the dots through the Majorana island, within a master equation approach. In the co-tunneling regime, which results in a Majorana-mediated effective coupling between the dots, the master equation approach allows us to obtain analytic solutions for the measurement currents. The measurement quality,characterized by figures of merit such as the visibility of measurement signals, is carried out in regard to the unusual decoherence effect rather than ‘which-path’ dephasing. The results obtained in this work are expected to be useful for future experiments of Majorana qubit and stabilizer measurements.

AN EXAMINATION OF THE INFLUENCE OF STABILIZERS ON THE PHOTOCHEMICAL STABILITY OF DISPERSE DYES

There is a powerful market-need for superfast disperse dyes in special use, e.g. for automotivefabrics. The photochemical fading reactions of dyes are often very complicated, and no singlphotodegradation pathway can be involved for all kinds of dyes. To enhance the photostability of the commonly used disperse dyes, a series of tests on the ef-fect of variable stabilizers on the photodegradation rate of nine representative disperse dyes werecarried out both in ethyl acetate solution and on cellulose acetate film. A moderate light sourceemitting above 300 nm was adopted in this study to simulate the photofading under practical appli-cations. The results show that, in solution, 2,2,6,6-tetramethyl-piperidine is the most effectivegeneral stabilizer for all the tested dyes, but on cellulose film, nickel diethyl-dithiocarbamateshows the greatest general protecting effect, and a synergistic effect is observed for special combina-tions of stabilizers.

A Meta-analysis of Mood Stabilizers for Alzheimer's Disease

The objective of this study was to assess the clinical evidence for or against mood stabilizers as a treatment for Alzheimer’s disease (AD).We searched 5 databases from their inception to January 2010.Five randomized clinical trials of mood stabilizers to treat human patients suffering from AD were included.These trials assessed the effectiveness of mood stabilizers as an adjunct treatment to conventional anti-dementia drugs on behavioral and psychological symptoms, especially on agitation.Methodological quality was assessed using the Jadad score.The results suggested a significant effect in favor of placebo on the Mini-Mental Status Examination [n=270, weight mean difference (WMD), -0.89; 95% confidence intervals (CIs) -1.69 to -0.09, P=0.03] and on the Neuropsychiatric Inventory total (NPI total) (n=51, WMD, 3.71; 95% CIs 0.15 to 7.26, P=0.04).There were no significant differences in change scores on total Brief Psychiatric Rating Scale (BPRS total), NPI/BPRS agitation, Cohen-Mansfield Agitation Inventory total and Physical Self Maintenance Scale between mood stabilizers and placebo.Only one of these studies was free of methodological limittions (Jadad score=5).In conclusion, based on the existing evidence, mood stabilizers are ineffective or even harmful as a treatment for AD.

Rare Earth Stearates as Thermal Stabilizers for Rigid Poly(vinyl chloride)

A series of stearates with different rare-earth ion were investigated as thermal stabilizers for rigid PVC at 180 ℃ in air. Their stabilizing efficiency was based on measuring the rate of dehydrochlorination. The resulted revealed the higher stabilizing efficiency of the investigated rare-earth stearates as thermal stabilizers for rigid PVC compared with the thermal stabilizers for industry: calcium stearate, zinc stearate, butyl stannum mercaptide, phosphite esters, β-diketone and epoxidized sunflower oil. This was well illustrated by longer incubation period (T_S) values and lower rate of dehydrochlorination. The stable efficiency was affected by the nature of rare-earth element's individual electronic shell. The mechanism for the stabilizing effect of rare-earth stearates was proposed. The result was experimentally proved based on IR spectrum.

SYNTHESIS AND CHARACTERIZATION OF NEW STABILIZERS WITH OPTIMAL MOLECULAR WEIGHT

Over 2 x 10(8) tons of polymers are produced every year, and a large portion of polymers faces the degradation problem. There are many effective methods to protect polymers against degradation and the addition of stabilizers to polymer remains the most convenient and effective way of enhancing polymer life and performance. In this article, a series of effective stabilizers with optimal molecular weight (MW), including common, monomeric and polymeric stabilizers (antioxidant and light stabilizer) were synthesized using isocyanation, controlled isocyanation, hydrosilylation, epoxide addition, macroreaction of stabilizing functional compounds and polymerization of monomeric stabilizers. The structure and performance of these new stabilizers were characterized by using IR, NMR, MS, UV-spectra, XPS and elemental analysis. The current development of stabilizer synthesis was also reviewed.

Fullerene bisadduct stabilizers:The effect of different addition positions on inhibiting the autocatalytic decomposition of nitrocellulose absorbed nitroglycerin

To explore the effect of different positions and number of pyrrolidine bound to the carbon cage on the stabilization effect of fulleropyrrolidine derivatives to nitrocellulose(NC)/nitroglycerine(NG),we synthesized N-(4-methoxy)phenylpyrrolidine-C_(60) and four different of bis(N-(4-methoxy)phenylpyrrolidine)-C_(60) compounds through Prato reaction.Their structures were characterized by UVevis,^(1)H NMR,^(13)C NMR,high-resolution mass spectroscopy,and single-crystal X-ray diffraction.Their stabilization effect to NC/NG were investigated using differential scanning calorimetry,methyl violet,vacuum stabilization effect,weight loss,and accelerating rate calorimeter tests.The results indicated these compounds had excellent stabilization effect to NC/NG.The stabilization effect of the fulleropyrrolidine bisadducts to NC/NG is significantly better than that of fulleropyrrolidine monoadduct and C_(60).Moreover,the position where pyrrolidine binds to fullerene in fulleropyrrolidine bisadducts is different,and its stabilization effect to NC is also different.The stabilization effect order of different bisadduct isomers to nitrocellulose is as follows:e-edge>trans-2>cis-2>trans-3.Electron paramagnetic resonance(EPR)and FT-IR were used to study the stabilization mechanism of fulleropyrrolidine derivatives to NC/NG.The EPR results also show that fulleropyrrolidine bisadducts with different addition sites have different abilities to absorb nitroxide,and their ability is better than that of the monoadduct and C_(60),which is consistent with the results of stabilization effect performance test.

Effects of the precipitation of stabilizers on the mechanism of grain fracturing in a zirconia metering nozzle

The mechanism of grain fracturing in a zirconia metering nozzle used in the continuous casting process was studied. The phase composition, microstructure, and chemical composition of the residual samples were studied using an X-ray fluorescence analyzer, scanning electron microscope, and electron probe. Results revealed that the composition, structure, and mineral phase of the original layer, transition layer, and affected layer of the metering nozzle differed because of stabilizer precipitation and steel slag permeation. The stabilizer MgO formed low-melting phases with steel slag and impure SiO2 on the boundaries（pores） of zirconia grains; consequently, grain fracturing occurred and accelerated damage to the metering nozzle was observed.

Properties and Mechanism of CFBC Fly Ash-cement based Stabilizers for Lake Sludge

Circulating fluidized bed combustion（CFBC） fly ash was mixed with cement or lime at a different ratio as a stabilizer to stabilize lake sludge.In order to understand the influences of stabilizers on the lake sludge properties,tests unconfined compressive strength,water stability and SEM observation were performed.The experimental results show that with the increase of the curing time,the strength of all the stabilized specimens increase,especially the samples containing cement.The strength of the specimens is decreased with the increasing of the CFBC fly ash/cement ratio,the optimum ratio between CFBC fly ash and cement is 2：3.The water stability of CFBC fly ash-cement based stabilizers is higher than those of cement and lime.Moreover,the lake sludge stabilization mechanism of CFBC fly ash-cement based stabilizers includes gelation and filling of the hydration products,i e,C-S-H gel and the AFt crystal,which act as benders to solidify those particles together and fill in the packing void of the aggregates.

Development and Field Application of Phosphogypsum-Based Soil Subgrade Stabilizers

A phosphogypsum-based subgrade stabilizer(PBSS)was formulated using industrial by-product phosphogypsum(PG),mixed with slag and calcium-silicon-rich active material(GSR).The active powder(AP)was used to modify PBSS,and PBSS-AP was obtained.PBSS and PBSS-AP were each mixed with 10%silty soil,and cement and lime(CAL:5%lime+2%cement)were used as the traditional material for comparative experiments.Samples were cured under standard conditions,and tested for unconfined compressive strength(UCS),water stability,volume expansion,and leachate,to explore the stabilization effect of the three solidified materials on silty soil.The results showed that the comprehensive performance of sility soil mixed with 12%PBSS-AP was the best.The CaO,SiO_(2)and Al_(2)O_(3)provided by PG,Slag and GSR will react with water to form a stable C-S-H gel,which is conducive to stabilizing the soil.Field application results showed that the compaction exceeded 95%,the deflection was 144.9 mm,and UCS was 2.5 MPa after 28 days.These findings indicated that PBSS-AP is an effective stabilizer for subgrade soils.

Desalted duck egg white nanogels as Pickering stabilizers for food-grade oil-in-water emulsion

Achieving the reuse of traditional egg by-products,salted duck egg whites(SEW),is an urgent problem to be solved.In this current work,we constructed a heat-induced gel-assisted desalination method for SEW.Subsequently,a top-down way was utilized to prepare desalted duck egg protein nanogels(DEPN)with uniformly distributed diameters and their application in the oil/water(O/W)interface system was explored.The results revealed that the increase of DEPN concentration could lower the droplet size,however,the size was negatively correlated with the oil phase fraction.Moreover,the effect of pH,ionic strength,and temperature on the emulsion stability demonstrated that the DEPN-stabilized emulsion displayed superior physical stability under different conditions.The addition of NaCl resulted in the significant decrease in droplet size of the emulsion,while further increasing the NaCl concentration,the droplet size did not decrease accordingly.Besides,heat-treatment and cold-treatment had little negative effect on the stability of the emulsion.Even if the droplet size of the emulsion increased at 80℃for 3 h,the morphology of the emulsion remained unchanged.Our study demonstrated DEPN had great potential as a stabilizer for food-grade Pickering emulsions.

Identification of the Optimum Locations of Power System Stabilizers in a Multimachine Power System Using Second Order Eigenvalue Sensitivity Analysis

This research paper deals with the identification of the best location of the Power System Stabilizers (PSS) and also the tuning of PSS parameters in order to improve the overall dynamic stability of multi machine power systems. The location of PSS is determined by identifying the critical modes and their corresponding first and second order eigenvalue sensitivities. In this formulation, sensitivity analysis of a particular mode can be performed with only its eigenvalues and their left and right eigenvectors. The simplicity and efficiency of this approach sharply contrast to the complexity of the traditional approach, where all eigenvalues and eigenvectors are required at the same time. The effectiveness of this method in selecting the optimum location for placement of PSSs is compared with the participation factor method. The proposed sensitivity theory used to identify the best PSS location in a five machine, eight bus El-Metwally and Malik System to increase the damping of both local and inter area modes for various operating conditions.

Using cemented paste backfill to tackle the phosphogypsum stockpile in China:A down-to-earth technology with new vitalities in pollutant retention and CO_(2) abatement

Phosphogypsum(PG),a hard-to-dissipate by-product of the phosphorus fertilizer production industry,places strain on the biogeochemical cycles and ecosystem functions of storage sites.This pervasive problem is already widespread worldwide and requires careful stewardship.In this study,we review the presence of potentially toxic elements(PTEs)in PG and describe their associations with soil properties,anthropogenic activities,and surrounding organisms.Then,we review different ex-/in-situ solutions for promoting the sustainable management of PG,with an emphasis on in-situ cemented paste backfill,which offers a cost-effective and highly scalable opportunity to advance the value-added recovery of PG.However,concerns related to the PTEs'retention capacity and long-term effectiveness limit the implementation of this strategy.Furthermore,given that the large-scale demand for ordinary Portland cement from this conventional option has resulted in significant CO_(2) emissions,the technology has recently undergone additional scrutiny to meet the climate mitigation ambition of the Paris Agreement and China's Carbon Neutrality Economy.Therefore,we discuss the ways by which we can integrate innovative strategies,including supplementary cementitious materials,alternative binder solutions,CO_(2) mineralization,CO_(2) curing,and optimization of the supply chain for the profitability and sustainability of PG remediation.However,to maximize the co-benefits in environmental,social,and economic,future research must bridge the gap between the feasibility of expanding these advanced pathways and the multidisciplinary needs.

A Study on the Transmission Dynamics of the Omicron Variant of COVID-19 Using Nonlinear Mathematical Models

This research examines the transmission dynamics of the Omicron variant of COVID-19 using SEIQIcRVW and SQIRV models,considering the delay in converting susceptible individuals into infected ones.The significant delays eventually resulted in the pandemic’s containment.To ensure the safety of the host population,this concept integrates quarantine and the COVID-19 vaccine.We investigate the stability of the proposed models.The fundamental reproduction number influences stability conditions.According to our findings,asymptomatic cases considerably impact the prevalence of Omicron infection in the community.The real data of the Omicron variant from Chennai,Tamil Nadu,India,is used to validate the outputs.

Mechanical Modeling and Analysis of Stability Deterioration of Production Well During Marine Hydrate Depressurization Production

Different from oil and gas production,hydrate reservoirs are shallow and unconsolidated,whose mechanical properties deteriorate with hydrate decomposition.Therefore,the formations will undergo significant subsidence during depressurization,which will destroy the original force state of the production well.However,existing research on the stability of oil and gas production wells assumes the formation to be stable,and lacks consideration of the force exerted on the hydrate production well by formation subsidence caused by hydrate decomposition during production.To fill this gap,this paper proposes an analytical method for the dynamic evolution of the stability of hydrate production well considering the effects of hydrate decomposition.Based on the mechanical model of the production well,the basis for stability analysis has been proposed.A multi-field coupling model of the force state of the production well considering the effect of hydrate decomposition and formation subsidence is established,and a solver is developed.The analytical approach is verified by its good agreement with the results from the numerical method.A case study found that the decomposition of hydrate will increase the pulling-down force and reduce the supporting force,which is the main reason for the stability deterioration.The higher the initial hydrate saturation,the larger the reservoir thickness,and the lower the production pressure,the worse the stability or even instability.This work can provide a theoretical reference for the stability maintaining of the production well.

A frequency servo SoC with output power stabilization loop technology for miniaturized atomic clocks

A frequency servo system-on-chip(FS-SoC)featuring output power stabilization technology is introduced in this study for high-precision and miniaturized cesium(Cs)atomic clocks.The proposed power stabilization loop(PSL)technique,incorporating an off-chip power detector(PD),ensures that the output power of the FS-SoC remains stable,mitigating the impact of power fluctuations on the atomic clock's stability.Additionally,a one-pulse-per-second(1PPS)is employed to syn-chronize the clock with GPS.Fabricated using 65 nm CMOS technology,the measured phase noise of the FS-SoC stands at-69.5 dBc/Hz@100 Hz offset and-83.9 dBc/Hz@1 kHz offset,accompanied by a power dissipation of 19.7 mW.The Cs atomic clock employing the proposed FS-SoC and PSL obtains an Allan deviation of 1.7×10^(-11) with 1-s averaging time.