Asymmetric Drying and Wetting Trends in Eastern and Western China

As an important factor that directly affects agricultural production, the social economy, and policy implementation,observed changes in dry/wet conditions have become a matter of widespread concern. However, previous research has mainly focused on the long-term linear changes of dry/wet conditions, while the detection and evolution of the non-linear trends related to dry/wet changes have received less attention. The non-linear trends of the annual aridity index, obtained by the Ensemble Empirical Mode Decomposition(EEMD) method, reveal that changes in dry/wet conditions in China are asymmetric and can be characterized by contrasting features in both time and space in China. Spatially, most areas in western China have experienced transitions from drying to wetting, while opposite changes have occurred in most areas of eastern China. Temporally, the transitions occurred earlier in western China compared to eastern China. Research into the asymmetric spatial characteristics of dry/wet conditions compensates for the inadequacies of previous studies, which focused solely on temporal evolution;at the same time, it remedies the inadequacies of traditional research on linear trends over centennial timescales. Analyzing the non-linear trend also provides for a more comprehensive understanding of the drying/wetting changes in China.

Effect of different drying methods on the amino acids,α-dicarbonyls and volatile compounds of rape bee pollen

The significant demand for high quality food has motivated us to adopt appropriate processing methods to improve the food nutritional quality and flavors.In this study,the effects of five drying methods,namely,pulsed vacuum drying(PVD),freeze drying(FD),infrared drying(IRD),hot-air drying(HAD)and sun drying(SD)on free amino acids(FAAs),α-dicarbonyl compounds(α-DCs)and volatile compounds(VOCs)in rape bee pollen(RBP)were determined.The results showed that FD significantly released the essential amino acids(EAAs)compared with fresh samples while SD caused the highest loss.Glucosone was the dominantα-DCs in RBP and the highest loss was observed after PVD.Aldehydes were the dominant volatiles of RBP and SD samples contained more new volatile substances(especially aldehydes)than the other four drying methods.Comprehensively,FD and PVD would be potential methods to effectively reduce the quality deterioration of RBP in the drying process.

Improving Semi-Dried Brown Rice Noodle Quality via Mixed Fermentation of Lactobacillus and Yeast

To address the coarse texture and poor cooking quality of brown rice flour,we employed fermentation using lactobacillus and yeast in varying proportions.The fermented flour from early indica rice Pear 13 was then processed into semi-dried brown rice noodles.

Validation of a Characteristics Dimensions for Transfers during Convective Drying of Sweet Potato Cubic, Cylindrical and Spherical Shapes

This present work solves the problem of initial shape influence on transfer during convective drying. A characteristic dimension is found for the cubic, cylindrical and spherical-shaped samples of the sweet potato. This characteristic dimension corresponds to the diameter D for the sphere, to the edge a for the cube and the diameter = height D = H for the cylinder. Unlike the sphere where this characteristic dimension is perfect, the cubic and cylindrical shapes have space factors which are, among other things, angles and borders. By fixing the same characteristic dimensions, we end up with overlapping curves, showing identical and uniform transfers.

Wetting alternating with partial drying during grain filling increases lysine biosynthesis in inferior rice grain

Lysine content is a criterion of the nutritional quality of rice.Understanding the process of lysine biosynthesis in early-flowering superior grain(SG)and late-flowering inferior grain(IG)of rice would advance breeding and cultivation to improve nutritional quality.However,little information is available on differences in lysine anabolism between SG and IG and the underlying mechanism,and whether and how irrigation regimes affect lysine anabolism in these grains.A japonica rice cultivar was grown in the field and two irrigation regimes,continuous flooding(CF)and wetting alternating with partial drying(WAPD),were imposed from heading to the mature stage.Lysine content and activities of key enzymes of lysine biosynthesis,and levels of brassinosteroids(BRs)were lower in the IG than in the SG at the early grainfilling stage but higher at middle and late grain-filling stages.WAPD increased activities of these key enzymes,BR levels,and contents of lysine and total amino acids in IG,but not SG relative to CF.Application of 2,4-epibrassinolide to rice panicles in CF during early grain filling reproduced the effects of WAPD,but neither treatment altered the activities of enzymes responsible for lysine catabolism in either SG or IG.WAPD and elevated BR levels during grain filling increased lysine biosynthesis in IG.Improvement in lysine biosynthesis in rice should focus on IG.

Machine learning-driven optimization of plasma-catalytic dry reforming of methane

This study investigates the dry reformation of methane(DRM)over Ni/Al_(2)O_(3)catalysts in a dielectric barrier discharge(DBD)non-thermal plasma reactor.A novel hybrid machine learning(ML)model is developed to optimize the plasma-catalytic DRM reaction with limited experimental data.To address the non-linear and complex nature of the plasma-catalytic DRM process,the hybrid ML model integrates three well-established algorithms:regression trees,support vector regression,and artificial neural networks.A genetic algorithm(GA)is then used to optimize the hyperparameters of each algorithm within the hybrid ML model.The ML model achieved excellent agreement with the experimental data,demonstrating its efficacy in accurately predicting and optimizing the DRM process.The model was subsequently used to investigate the impact of various operating parameters on the plasma-catalytic DRM performance.We found that the optimal discharge power(20 W),CO_(2)/CH_(4)molar ratio(1.5),and Ni loading(7.8 wt%)resulted in the maximum energy yield at a total flow rate of∼51 mL/min.Furthermore,we investigated the relative significance of each operating parameter on the performance of the plasma-catalytic DRM process.The results show that the total flow rate had the greatest influence on the conversion,with a significance exceeding 35%for each output,while the Ni loading had the least impact on the overall reaction performance.This hybrid model demonstrates a remarkable ability to extract valuable insights from limited datasets,enabling the development and optimization of more efficient and selective plasma-catalytic chemical processes.

Solvent transport dynamics and its effect on evolution of mechanical properties of nitrocellulose(NC)-based propellants under hot-air drying process

Appropriate drying process with optimized controlling of drying parameters plays a vital role in the improvement of the quality and performance of propellant products.However,few research on solvent transport dynamics within NC-based propellants was reported,and its effect on the evolution of mechanical properties was not interpreted yet.This study is conducted to gain a comprehensive understanding of hot-air drying for NC-based propellants and clarify the effect of temperature on solvent transport behavior and further the change of mechanical properties during drying.The drying kinetic curves show the drying time required is decreased but the steady solvent content is increased and the drying rate is obviously increased with the increase of hot-air temperatures,indicating hot-air temperatures have a significant effect on drying kinetics.A modified drying model was established,and results show it is more appropriate to describe solvent transport behavior within NC-based propellants.Moreover,two linear equations were established to exhibit the relationship between solvent content and its effect on the change of tensile properties,and the decrease of residual solvent content causes an obvious increase of tensile strength and tensile modulus of propellant products,indicating its mechanical properties can be partly improved by adjustment of residual solvent content.The outcomes can be used to clarify solvent transport mechanisms and optimize drying process parameters of double-based gun propellants.

Regulating crystal phase of TiO_(2) to enhance catalytic activity of Ni/TiO_(2) for solar-driven dry reforming of methane

Ni/TiO_(2) catalyst is widely employed for photo-driven DRM reaction while the influence of crystal structure of TiO_(2) remains unclear.In this work,the rutile/anatase ratio in supports was successfully controlled by varying the calcination temperature of anatase-TiO_(2).Structural characterizations revealed that a distinct TiO_(x) coating on the Ni nanoparticles(NPs)was evident for Ni/TiO_(2)-700 catalyst due to strong metal-support interaction.It is observed that the TiOx overlayer gradually disappeared as the ratio of rutile/anatase increased,thereby enhancing the exposure of Ni active sites.The exposed Ni sites enhanced visible light absorption and boosted the dissociation capability of CH4,which led to the much elevated catalytic activity for Ni/TiO_(2)-950 in which rutile dominated.Therefore,the catalytic activity of solar-driven DRM reaction was significantly influenced by the rutile/anatase ratio.Ni/TiO_(2)-950,characterized by a predominant rutile phase,exhibited the highest DRM reactivity,with remarkable H_(2) and CO production rates reaching as high as 87.4 and 220.2 mmol/(g·h),respectively.These rates were approximately 257 and 130 times higher,respectively,compared to those obtained on Ni/TiO_(2)-700 with anatase.This study suggests that the optimization of crystal structure of TiO_(2) support can effectively enhance the performance of photothermal DRM reaction.

Effect of drying cracks on swelling and self-healing of bentonite-sand blocks used as engineered barriers for radioactive waste disposal

Experiments were conducted to evaluate the healing of drying cracks in air-dried bentonite-sand blocks after hydration and swelling in groundwater,providing justifications to simplify the protection of blocks prior to installation in a high-level radioactive waste repository.Synthetic groundwater was prepared to represent the geochemistry of Beishan groundwater,and was used to hydrate the blocks during the swelling pressure and swelling strain measurements,as Beishan is the most promising site for China's repository.Healing of the surface cracks was recorded by photography,and healing of the internal cracks was visualized by CT images and hydraulic conductivity of air-dried blocks.The results indicate that the maximum swelling pressure and swelling strain are primarily affected by the geochemistry of Beishan groundwater,but not affected by the drying cracks.The maximum swelling pressure and swelling strain of air-dried blocks are comparable to or even higher than the pressure and strain of fresh blocks.The maximum swelling pressure measured in strong(i.e.high ion strength)Beishan groundwater was 44%of the pressure measured in deionized(DI)water,and the maximum swelling strain was reduced to 23%of the strain measured in DI water.Nevertheless,the remained swelling of the blocks hydrated in strong Beishan groundwater was sufficient to heal the surface and internal drying cracks,as demonstrated by the pictures of surface cracks and CT images.The hydraulic conductivity of the air-dried block permeated with strong groundwater was comparable(3.7×higher)to the hydraulic conductivity of the fresh block,indicating the self-healing of drying cracks after hydration and swelling in groundwater.A simplified method of protecting the block with plastic wraps before installation is recommended,since the remained swelling of the block hydrated in Beishan groundwater is sufficient to heal the drying cracks.

Short Communication: Enhancing the Drying Process of Microbial-Based Products with a Dehumidifier

The development of microbial-based products requires certain criteria for them to be successfully commercialized. The product must meet the following desirable criteria: effectiveness, contamination free, stability, cost-effectiveness, and a prolonged shelf life. Controlling the drying process is crucial for ensuring the stability and durability of the product. The traditional approach, which involved mechanical and natural drying, led to decreased productivity and quality. The objective of this research endeavour was to achieve a dry process enhancement while preserving the microbial quality of Trichoderma asperellum (M103). The temperature and relative humidity during the drying period were monitored under two conditions: with and without a dehumidifier. The results demonstrate that the dehumidifier increases drying period efficiency by up to 63%.

Investigation on Effect of Composition on the Drying of Castables with Cement Binder

Monolithic refractory castables comprising a hydraulic bond are still used in a vast majority of cases because of their flexibility and robustness,despite many developments for chemical as well as non-cement castable binders.The drying can however be a challenge,in particular for deflocculated dense castables of the low cement castable range.Many publications have been released on this topic for the last ten years,but they often focused on the drying mechanisms or on the addition of drying aids.This paper presents some experimental results on the effect of the composition on the drying properties,especially on the effect of silicon carbide,used for its high thermal conductivity,and on the matrix system.It also introduces two laboratory tests to study and iteratively improve the drying schedule of a given castable lining.The results show that the spalling resistance and the vapor pressure build-up are significantly influenced by the formulation.It is also shown that the castable properties after drying can be altered if the heating rate is very high.

The Role of the Size Effect on the Drying of Refractory Castables—How Its Under-standing Could Narrow the Gap between Laboratory Studies and Industrial Reality

Refractories have unique capabilities such as sustaining their shape and properties at extreme conditions such as the combination of high temperatures and thermal shock,contact with molten metals and slags and in some circumstances resistance to erosion from abrasive particles.Given the large processing output of the heavy industries such as the cement and steel ones which both require high temperature processes,the refractories structures span various meters and weight of several tons.As the water removal stage of hydraulic bonded castables in industrial sites takes hours(10-60 h)due to the risk of explosive spalling,efforts to mitigate it are commonly studied.This has provided theoretical understanding of the general aspects of drying and important tools,such as the thermogravimetry analysis(TGA),for the design of refractory compositions with higher explosive spalling resistance.However,the optimization of this process is still far from the industrial reality especially because the actual linings that require the drying are orders of magnitude larger than the samples considered in the laboratory tests.Therefore,this study proposed the analysis of the sample volume effect on the water removal dynamics through TGA of high alumina castables with calcium aluminate cement.Conventionalφ5 cm×5 cm cylindrical samples were assessed in a laboratory scale equipment whereas macro TGA were carried out considering 20 cm×20 cm×20 cm and 30 cm×30 cm×30 cm cubic samples.Additionally,the effect of polymeric fibers was also considered.It was found out that the different thermal gradients within the macro TGA samples resulted in an inflection on the sample’s heating rate and that the mass loss was affected by the volume considered,especially for the composition without additives.These findings highlight the requirement of carefully taking into consideration the different dimensional sizes and thermal gradients in the samples when analyzing and interpreting the laboratory studies,and especially when trying to extrapolate such results to the industrial reality.

Soil Cover in the Eastern Part of the Dried Bed of the Aral Sea

The greatest environmental disaster in Central Asiathe drying up of the Aral Seahas led to the formation of a new terrain, extending over 2.7 million hectares in Uzbekistan. This newly formed terrain is dynamically developing, with emerging soil formations replacing bottom sediments. This paper analyzes the results of a study on soil formation in the eastern part of the dried-up seabed, focusing on the influence of natural processes occurring there.

Determination of Natural Logarithm of Diffusion Coefficient and Activation Energy of Thin Layer Drying Process of Ginger Rhizome Slices

This study is an extension of the previous work done with ARS-680 Environmental Chamber. Drying is a complex operation that demands much energy and time. Drying is essentially important for preservation of ginger rhizome. Drying of ginger was modeled, and then the effective diffusion coefficient and activation energy were determined. For this purpose, the experiments were done at six levels of varied temperatures: 10°C, 20°C, 30°C, 40°C, 50°C and 60°C. The values of effective diffusion coefficients obtained in this work for the variously treated ginger rhizomes closely agreed with the average effective diffusion coefficients of other notable authors who determined the drying kinetics and convective heat transfer coefficients of ginger slices.

Modeling the Drying Kinetics of Pigeon Pea [Cajanus cajan (L.) Millspaugh]

We set out to model the oven-drying kinetics of a legume known as pigeon pea, harvested in the Bouenza department in the south-west of the Republic of Congo. The drying kinetics of pigeon peas was carried out in an oven under experimental conditions using temperatures of: 50°C, 60°C and 70°C. Seven mathematical models were used to describe pigeon pea drying. During drying, water loss was faster and shorter at 70°C [10.446 g/25 g wet weight (wwb) for 320 min (5.3 h)] compared to 50°C [10.996 g/25 g wet weight (wwb) for 520 min (8.6 h)] and 60°C [10.616 g/25 g wet weight (wwb) for 420 min (7.0 h)] where it was slower and longer. With regard to modeling, and based on the principle of choosing the right model focusing on the high value of R2 and low values of χ2 and RMSE, two models were selected, the Midili model for temperatures of 50°C and 60°C and the Henderson and Pabis model modified for temperature of 70°C showed better results. The R2, χ2 and RMSE values calculated for pigeon pea are 0.99985, 3.93404E-5 and 0.00627;0.9997, 9.245E-5 and 0.00962;0.99996, 1.56332E-5 and 0.00395 respectively at 50°C, 60°C and 70°C.

贵州‘红阳’猕猴桃植株叶片(DRIS)营养诊断状况分析

本研究采用DRIS诊断法中的指数法判断营养状况,分析化验贵州高低产‘红阳’猕猴桃果园叶片营养元素丰度。结果表明,高产果园和低产果园叶片N养分浓度之间差异不显著,变异系数基本持平;叶片P养分存在显著差异性;叶片K养分存在显著差异性。说明叶片P、K含量是猕猴桃产量的2个限制因子。果实膨大期高产果园和低产果园对N、P、K的需肥顺序是K>N>P,高产和低产果园均存在P过剩现象,高产果园更为严重;高产果园的养分不平衡指数NII低于低产果园,树体N、P、K更不平衡;高产果园和低产果园同样缺K,高产果园对K的需求强度更大。高产果园和低产果园都要注重增施钾肥,并适当补充氮肥。

阿克苏地区灰枣叶片营养DRIS诊断

通过对新疆阿克苏地区31个成龄灰枣园叶样的采集与分析,运用诊断施肥综合法(DRIS)进行叶片营养诊断,旨在为该地区成龄灰枣的营养诊断和平衡施肥提供参考。结果表明,以7月中旬灰枣叶片N、P、K元素浓度测定值作为主要诊断依据,制定了DRIS指数法的营养诊断标准,经检验取得了较高的诊断正确率。按产量组统计施肥顺序,各组营养元素施肥顺序第一的枣园数及其频率分别为:高产组,N—4—37.0%,P—2—18.0%,K—5—45.0%;中产组,N—0,P—13—92.9%,K—1—7.1%;低产组,N—0,P—6—85.7%,K—1—14.3%。DRIS诊断的阿克苏地区灰枣叶片N、P、K营养元素浓度最佳比值范围分别:N/P=11.861±2.859、N/K=1.820±0.306、K/P=6.667±2.027。

基于DRIS法的大花序桉苗期“黄化症”苗圃营养状况诊断

植物营养诊断是评估大花序桉营养状况的可靠、便捷方法。本研究采用诊断施肥法(DRIS),对广西崇左发生“黄化症”的大花序桉苗木营养状况进行调查、诊断。结果表明,大花序桉苗期叶片营养元素含量与“黄化症”之间密切相关。大花序桉叶片苗期养分供给状况以及需肥顺序为Fe>P>N>Mg>K>B>Cu>Zn>Mn>Ca。黄化症的叶片N、P、Fe和Ca诊断指数均小于0,属于缺乏水平,是影响苗木黄化的关键因子,而其他营养元素的DRIS诊断指数均为正值,供给较为充足。大花序桉苗期的各营养元素的适宜范围为N(7.50~10.80)g/kg、P(1.25~2.98)g/kg、K(10.37~30.64)g/kg、Ca(5.13~23.631)mg/kg、Mg(1.55~3.82)mg/kg、Cu(4.53~8.34)mg/kg、Zn(46.57~62.83)mg/kg、Fe(140.03~226.31)mg/kg、Mn(252.95~426.99)mg/kg、B(18.80~39.85)mg/kg。

Drying characteristics, functional properties and in vitro digestion of purple potato slices dried by different methods

The drying characteristics,physico-chemical and functional properties,as well as starch digestibility,of purple potato slices dried using different methods(such as,vacuum freeze-drying,VFD;hot-air drying,HAD;air-impingement jet drying,AIJD;and far-infrared assisted heat-pump drying,FIHPD)were investigated.Drying rate was the highest(3.0 g 100 g^-1 min^-1)using AIJD,followed by FIHPD and HAD,and the rate of VFD was the lowest one(0.3 g 100 g^-1 min^-1).Drying data were fitted to 12 thin-layer drying models,with the Midilli model giving the best predictions.Moreover,AIJD showed higher diffusivity(5.5×10^-10 m^2 s^–1)and energy efficiency(55 J g^-1)than any other drying method used in this study.With reference to the samples dried by VFD,the starch granules of the samples obtained by HAD,FIHPD,and AIJD exhibited different extent of disruption,which significantly increased their water absorption capacity,swelling power,and in vitro digestibility,but decreased the peak viscosity.The sample resulting from AIJD had the greatest water absorption capacity(7.9 g g^-1)and solubility(21.6%),but the smallest syneresis rate(48%).Good correlation coefficients(R^2>0.98)implied that the pseudofirst order kinetic model adequately described the rate and extent of starch digestion of dried potato flours.Samples from AIJD and FIHPD showed the highest digestibility percentages,reaching to 72.4 and 72.5%.Based on the drying rate,specific energy consumption,functional properties and digestibility,AIJD appeared to be quite effective and suitable to be transferred on the industry scale.

Impacts of different drying strategies on drying characteristics,the retention of bio-active ingredient and colour changes of dried Roselle

The drying kinetics of Roselle （Hibiscus sabdariffa L） of variety Terengganu （UMKL-1） and the quality attribution of Roselle were studied. The experiments were conducted using four different drying methods, including solar greenhouse drying （SD）, solar greenhouse with intermittent heat pump drying （SIHP）, hot air drying （HA） and heat pump drying （HP）. Among the four drying methods, HP achieved the highest drying rate at a range from 0.054 g H20-（g DM）-1. rain-1 to 0.212 g H20-（g DM）-1. rain 1 while SD had the lowest drying rate, measured at 0.042 g H2O. （g DM） 1.min- 1. The analysis on colour kinetics revealed that there is no significant colour loss （p 〉 0.05） observed from HP＇s dried Roselle. Greater amount of flavonoid compounds i.e. protocatechuic acid was found in SD and SIHP dried finished product whereas HP＇s dried Roselle contains higher percentage of catechin as compared to other drying methods.