Progressive Collapse Resistance of a New Staggered Story Isolated System

A new staggered isolated system developed from the mid-story isolated system is the new staggered story isolated system. There are not many studies on this structure currently. In this study, an 18-story new staggered story isolated system model is established using SAP2000. The dynamic nonlinear dynamic alternate method is used to analyze the structure against progressive collapse. Results show that the structure has good resistance to progressive collapse, and there is no progressive collapse under each working condition. The progressive collapse does not occur for the case of removing only one vertical structural member of the new staggered of isolated system. The side column has big influence on this isolated structures’ progressive collapse;the removal of vertical structural member of the isolation layer has less impact on the structure than the removal of the bottom vertical structural member. After the removing of the member, the internal force of the structure will be redistributed, and the axial force of the adjacent columns will change obviously, showing a trend of “near large and far small”.

Improved Staggered Algorithm for Phase-Field Brittle Fracture with the Local Arc-Length Method

The local arc-length method is employed to control the incremental loading procedure for phase-field brittle fracture modeling.An improved staggered algorithm with energy and damage iterative tolerance convergence criteria is developed based on the residuals of displacement and phase-field.The improved staggered solution scheme is implemented in the commercial software ABAQUS with user-defined element subroutines.The layered system of finite elements is utilized to solve the coupled elastic displacement and phase-field fracture problem.A one-element benchmark test compared with the analytical solution was conducted to validate the feasibility and accuracy of the developed method.Our study shows that the result calculated with the developed method does not depend on the selected size of loading increments.The results of several numerical experiments show that the improved staggered algorithm is efficient for solving the more complex brittle fracture problems.

Buckling morphology of glassy nematic films with staggered director field

The photo-induced buckling of axially periodic glassy nematic films with alternating stripped director domains is explored by the F¨oppl-von K′arm′an plate theory along with a modified kinetics approach.The effects of domain widths on the critical light intensity as well as the buckling morphology are examined numerically.It is found that in most cases the buckled film forms regularly aligned dimples and protrusions,but shows large scale bending perpendicular to the periodic axis if the widths of the stripes are nearly the same.In addition,change in light intensity is shown to alter the wavenumber of the buckling pattern.These results are expected helpful to the design of shape-shifting structures with glassy nematic films.

基于L_(1)&TV正则化的低过采样Staggered SAR成像方法

高分辨率宽测绘带(high-resolution and wide-swath,HRWS)成像是星载合成孔径雷达(synthetic aperture radar,SAR)发展的重要趋势。Staggered SAR通过改变脉冲重复频率(pulse repetition frequency,PRF)将盲区分散在整个成像带内,可以将距离向幅宽扩展为传统体制的数倍。针对变PRF模式存在的非均匀采样和回波数据丢失问题,提出了一种基于L_(1)&TV正则化的低过采样Staggered SAR成像方法。所提方法可以在不恢复丢失数据的情况下实现方位模糊抑制,并且在稀疏重构模型中引入TV正则化项,从而实现分布式目标的精确重构。仿真和实际数据实验验证了所提方法的有效性。

Effect of extrusion ratio on the microstructure and texture evolution of AZ31 magnesium alloy by the staggered extrusion(SE)

There are many problems with the conventional processes of magnesium alloy bending products,such as long processes and difficulty in controlling the product shape.This paper provides a staggered extrusion(SE)process to solve the above manufacturing bottlenecks.The effects of different extrusion ratios(λ)on the AZ31 magnesium alloy bending products prepared by the SE process was investigated in this paper.The results show that the bending radii of the AZ31 Mg bending products increase with the increase ofλat the same staggered distance(h=16 mm).When A is in creased from 11.11 to 44.44,the average bending radius of bending products is decreased from 14.7 mm to 9 mm,and the average grain size is decreased by 59.43%.After the SE process,the extruded fiber texture of the AZ31 Mg bending products is obvious,and the deformed texture is a mixed texture of{0001}(10-10)deformation texture and{10-11}(11-20)recrystallization texture.The results of XRD and EBSD showed that pyramidal slip is an important mode of crystal slip systems in AZ31 magnesium alloys during the SE process.It provided a scientific basis for forming AZ31 Mg alloy bending products with excellent microstructure by the SE process.

Effect of cyclotron resonance on ‘hot’ dispersion in a staggered double metallic grating sheet beam travelling wave tube

Based on the beam wave synchronous interaction in transverse and longitudinal directions at the same time and starting from Maxwell’s equation and linear Vlasov equation, the beam–wave interaction ‘hot’ dispersion equation considering both cyclotron resonance and Cherenkov resonance in a staggered double metallic grating traveling wave tube is deduced.Through the reasonable selection for geometric and electrical parameters, the numerical calculation and analysis of the ‘hot’ dispersion equation shows that the beam–wave interaction gain and frequency band with the cyclotron resonance enhancement effect are higher than those with only Cherenkov resonance radiation.

A scheme to treat the singularity in global seismic wavefield simulation using pseudospectral method with staggered grids

The pseudospectral method has been applied to the simulation of seismic wave propagation in 2-D global Earth model.When a whole Earth model is considered,the center of the Earth is included in the model and then singularity arises at the center of the Earth where r=0 since the 1/r term appears in the wave equations.In this paper,we extended the global seismic wavefield simulation algorithm for regular grid mesh to staggered grid configuration and developed a scheme to solve the numerical problems associated with the above singularity for a 2-D global Earth model defined on staggered grid using pseudospectral method.This scheme uses a coordinate transformation at the center of the model,in which the field variables at the center are calculated in Cartesian coordinates from the values on the grids around the center.It allows wave propagation through the center and hence the wavefield at the center can be stably calculated.Validity and accuracy of the scheme was tested by compared with the discrete wavenumber method.This scheme could also be suitable for other numerical methods or models parameterized in cylindrical or spherical coordinates when singularity arises at the center of the model.

The Numerical Modeling of 3-D Elastic Wave Equation Using a High-Order,Staggered-Grid, Finite Difference Scheme

This article provides the application of the high-order, staggered-grid, finite-difference scheme to model elastic wave propagation in 3-D isotropic media. Here, we use second-order, temporal-and high-order spatial finite-difference formulations with a staggered grid for discretization of the 3-D elastic wave equations of motion. The set of absorbing boundary conditions based on paraxial approximations of 3-D elastic wave equations are applied to the numerical boundaries. The trial resuits for the salt model show that the numerical dispersion is decreased to a minimum extent, the accuracy high and diffracted waves abundant. It also shows that this method can be used for modeling wave propagation in complex media with the lateral variation of velocity.

Numerical simulation of seismic wavefields in TTI media using the rotated staggered-grid compact finite-difference scheme

Numerical simulation in transverse isotropic media with tilted symmetry axis(TTI) using the standard staggered-grid finite-difference scheme(SSG)results in errors caused by averaging or interpolation. In order to eliminate the errors, a method of rotated staggered-grid finite-difference scheme(RSG) is proposed. However, the RSG brings serious numerical dispersion. The compact staggered-grid finite-difference scheme(CSG) is an implicit difference scheme, which use fewer grid points to suppress dispersion more effectively than the SSG. This paper combines the CSG with the RSG to derive a rotated staggered-grid compact finite-difference scheme(RSGC). The numerical experiments indicate that the RSGC has weaker numerical dispersion and better accuracy than the RSG.

Source wavefield reconstruction based on an implicit staggered-grid finite-difference operator for seismic imaging

Reverse time migration and full waveform inversion involve the crosscorrelation of two wavefields,propagated in the forward-and reverse-time directions,respectively.As a result,the forward-propagated wavefield needs to be stored,and then accessed to compute the correlation with the backward-propagated wavefield.Boundary-value methods reconstruct the source wavefield using saved boundary wavefields and can significantly reduce the storage requirements.However,the existing boundary-value methods are based on the explicit finite-difference(FD)approximations of the spatial derivatives.Implicit FD methods exhibit greater accuracy and thus allow for a smaller operator length.We develop two(an accuracy-preserving and a memory-efficient)wavefield reconstruction schemes based on an implicit staggered-grid FD(SFD)operator.The former uses boundary wavefields at M layers of grid points and the spatial derivatives of wavefields at one layer of grid points to reconstruct the source wavefield for a(2M+2)th-order implicit SFD operator.The latter applies boundary wavefields at N layers of grid points,a linear combination of wavefields at M–N layers of grid points,and the spatial derivatives of wavefields at one layer of grid points to reconstruct the source wavefield(0≤N<M).The required memory of accuracy-preserving and memory-efficient schemes is(M+1)/M and(N+2)/M times,respectively,that of the explicit reconstruction scheme.Numerical results reveal that the accuracy-preserving scheme can achieve accurate reconstruction at the cost of storage.The memory-efficient scheme with N=2 can obtain plausible reconstructed wavefields and images,and the storage amount is 4/(M+1)of the accuracy-preserving scheme.

Characteristics of a Drainage Channel with Staggered Indented Sills for Controlling Debris Flows

The characteristics of a new type of drainage channel with staggered indented sills for controlling debris flows were studied. The intermediate fluid in the non-viscous debris flow exhibited a helical movement, whereas the fluid near the sidewall had a stop-start movement pattern; the viscous debris flow exhibited a stable structure between the indented sills. The experimental results indicate that the mean velocity of the debris flow increased with increasing channel gradients, and the debris flow velocity was slightly affected by the angle of the sills. The average velocity of the non-viscous debris flow increased in the range of(0.5–1.5) interval between the indented sills, whereas the average velocity of the viscous debris flow increased initially and then decreased in the range of(0.75–1.25) interval between the indented sills. The depth of the non-viscous debris flow tended to gradually increase as the channel gradients increased, whereas the depth of the viscous debris flow gradually decreased as the channel gradients increased. When the discharge of the debris flow was constant, the angle and the interval between the indented sills had a slight effect on the depth of the viscous debris flow, whereas the depth of the non-viscous debris flow exhibited a different trend, as the sill angles and intervals were varied.

Optimized staggered-grid finite-difference operators using window functions

蹒跚格子有限差别(SGFD ) 方法广泛地在地震前面的建模被使用了。向前当模特儿的结果的精确直接影响随后的地震倒置和迁居的结果。数字分散是在这个方法的问题之一。由用窗口操作符代替有限差别的操作符的窗口函数方法罐头还原剂分散，由截断 pseudospectral 方法的空间卷绕旋转系列获得了。尽管窗户操作员在 low-wavenumber 领域有高精确，他们的精确在 high-wavenumber 领域很快减少。我们开发一个最少的广场优化方法提高窗口函数方法获得的操作符的精确。我们把 SGFD 问题转变成一个最少的广场问题并且反复地发现最好的答案。当起始的值和优化的域被错误阀值放，窗口操作符被选择。conjugate 坡度方法也被采用增加答案的稳定性。近似错误分析和数字模拟结果建议建议方法增加窗户功能操作员和减少的精确数字分散。

Comparison between staggered grid finite difference method and stochastic method in simulating strong ground motions

Strong ground motion of an earthquake is simulated by using both staggered grid finite difference method (FDM) and stochastic method, respectively. The acceleration time histories obtained from the both ways and their response spectra are compared. The result demonstrates that the former is adequate to simulate the low-frequency seismic wave; the latter is adequate to simulate the high-frequency seismic wave. Moreover, the result obtained from FDM can better reflect basin effects.

Calculation of cell face velocity of non-staggered grid system

In this paper,the cell face velocities in the discretization of the continuity equation,the momentum equation,and the scalar equation of a non-staggered grid system are calculated and discussed.Both the momentum interpolation and the linear interpolation are adopted to evaluate the coefficients in the discretized momentum and scalar equations.Their performances are compared.When the linear interpolation is used to calculate the coefficients,the mass residual term in the coefficients must be dropped to maintain the accuracy and convergence rate of the solution.

A staggered double vane circuit for a W-band traveling-wave tube amplifier

Based on the combination of a staggered double vane slow wave structure(SWS) and round electron beam,a 200-W W-band traveling-wave tube(TWT) amplifier is studied in this paper.The main advantages of round beam operation over the sheet beam is that the round beam can be formed more easily and the focus requirement can be dramatically reduced.It operates in the fundamental mode at the first spatial harmonic.The geometric parameters are optimized and a transition structure for the slow wave circuit is designed which can well match the signal that enters into and goes out from the tube.Then a TWT model is established and the particle-in-cell(PIC) simulation results show that the tube can provide over 200-W output power in a frequency range of 88 GHz-103 GHz with a maximum power of 289 W at 95 GHz,on the assumption that the input power is 0.1 W and the beam power is 5.155 kW.The corresponding conversion efficiency and gain at 95 GHz are expected to be 5.6% and 34.6 dB,respectively.Such amplifiers can potentially be used in high power microwave-power-modules(MPM) and for other portable applications.

Quantum Monte Carlo study on the phase transition for a generalized two-dimensional staggered dimerized Heisenberg model

In order to gain a deeper understanding of the quantum criticality in the explicitly staggered dimerized Heisenberg models,we study a generalized staggered dimer model named the J0-J1-J2 model,which corresponds to the staggered J-J ' model on a square lattice and a honeycomb lattice when J1/J0 equals 1 and 0,respectively.Using the quantum Monte Carlo method,we investigate all the quantum critical points of these models with J1/J0 changing from 0 to 1 as a function of coupling ratio α=J2/J0.We extract all the critical values of the coupling ratio αc for these models,and we also obtain the critical exponents ν,β/ν,and η using different finite-size scaling anstz,.All these exponents are not consistent with the three-dimensional Heisenberg universality class,indicating some unconventional quantum ciritcial points in these models.

Mixing Dynamics and Synthesis Performance of Staggered Herringbone Micromixer for Limit Size Lipid Nanoparticles

Staggered herringbone micromixer has shown good efficiency of mixing and performance of synthesizing nanoparticles.To bring a detailed understanding of the mixing dynamics and syn-thesis performance of this kind of micromixer,this paper carries out a high-fidelity numerical simu-lation and a parametrial experimental study on a well-established design.A passive tracer is induced in the numerical simulation to analyze mixing dynamics induced by the staggered herring-bone structures.Three effects are identified to reveal the underlying mechanisms,including folding,stretching,and splitting.To the authors’knowledge,the splitting effect is identified for the first time by the isosurface of the passive tracer,to show the high efficiency of the staggered herring-bone design.The micromixer is then used to synthesize lipid nanoparticles by mixing a mixture of lipid and poly(lactic-co-glycolic acid)(PLGA)solutions with deionized water.Under a wide mass ratio of lipid and PLGA solutions,nanoparticles with good monodispersity are synthesized to reflect the good compatibility of the micromixer and the mixture.In addition,an optimized mass ratio is identified from the parametrical experiment.

Fluid Flow Past a Circular Cylinder with Tandem Rod and Staggered Rod at Low Reynolds Number

The flow past a primary cylinder with one tandem control rod and one staggered control rod is simulated in this paper through solving the Navier-Stokes equations.Two examples are simulated to validate the model,and the results matched well with those of previous researches.The Reynolds number based on the diameter of the primary cylinder is 500.The diameter ratio between the control rod and the primary cylinder(d/D) is 0.25.It was found that the effect of the combination of one upstream tandem control rod and one staggered control rod on the hydrodynamics of the primary cylinder is a linear superposition of the effect of a corresponding single control rod,and the effect of the upstream tandem control rod is dominant at larger spacing ratios such as G/D = 2.For the combination of a downstream tandem control rod and a staggered control rod,the effect of the control rods is different from that of the corresponding single control rod in the region of 0.2<G/D<0.5 & 30?<α<120? and 0.9<G/D<1.4 & 30?<α<50?,where the additional effect is obvious.In this case,the effect of the downstream tandem control rod is dominant at small spacing ratios(such as G/D = 0.1).At moderate spacing ratios such as G/D = 0.4,the effects of the tandem control rod and the staggered control rod are comparable in both cases.