Coke behavior with H_(2)O in a hydrogen-enriched blast furnace:A review

Hydrogen-enriched blast furnace ironmaking has become an essential route to reduce CO_(2)emissions in the ironmaking process.However,hydrogen-enriched reduction produces large amounts of H_(2)O,which places new demands on coke quality in a blast furnace.In a hydrogen-rich blast furnace,the presence of H_(2)O promotes the solution loss reaction.This result improves the reactivity of coke,which is 20%-30%higher in a pure H_(2)O atmosphere than in a pure CO_(2)atmosphere.The activation energy range is 110-300 kJ/mol between coke and CO_(2)and 80-170 kJ/mol between coke and H_(2)O.CO_(2)and H_(2)O are shown to have different effects on coke degradation mechanisms.This review provides a comprehensive overview of the effect of H_(2)O on the structure and properties of coke.By exploring the interactions between H_(2)O and coke,several unresolved issues in the field requiring further research were identified.This review aims to provide valuable insights into coke behavior in hydrogen-rich environments and promote the further development of hydrogen-rich blast furnace ironmaking processes.

A molecular insight into coke formation process of vacuum residue in thermal cracking reaction

Understanding the coking behaviors has been considered to be really essential for developing better vacuum residue processing technologies.A battery of thermal cracking tests of typical vacuum residue at 410℃ with various reaction time were performed to evaluate the coke formation process.The total yields of ideal components including naphtha,atmospheric gas oil(AGO)and vacuum gas oil(VGO)of thermal cracking reactions increased from 10.89%to 40.81%,and the conversion ratios increased from8.05%to 43.33%with increasing the reaction time from 10 to 70 min.The asphaltene content increased from 12.14%to a maximum of 22.39%and then decreased,and this maximum of asphaltene content occurred at the end of the coking induction period.The asphaltenes during the coking induction period,at the end and after coking induction period of those tested thermal cracking reactions were characterized to disclose the structure changing rules for coke formation process,and the coke formation pathways were discussed to reveal the coke formation process at molecular level.

Role of iron ore in enhancing gasification of iron coke:Structural evolution,influence mechanism and kinetic analysis

The utilization of iron coke provides a green pathway for low-carbon ironmaking.To uncover the influence mechanism of iron ore on the behavior and kinetics of iron coke gasification,the effect of iron ore on the microstructure of iron coke was investigated.Furthermore,a comparative study of the gasification reactions between iron coke and coke was conducted through non-isothermal thermogravimetric method.The findings indicate that compared to coke,iron coke exhibits an augmentation in micropores and specific surface area,and the micropores further extend and interconnect.This provides more adsorption sites for CO_(2) molecules during the gasification process,resulting in a reduction in the initial gasification temperature of iron coke.Accelerating the heating rate in non-isothermal gasification can enhance the reactivity of iron coke.The metallic iron reduced from iron ore is embedded in the carbon matrix,reducing the orderliness of the carbon structure,which is primarily responsible for the heightened reactivity of the carbon atoms.The kinetic study indicates that the random pore model can effectively represent the gasification process of iron coke due to its rich pore structure.Moreover,as the proportion of iron ore increases,the activation energy for the carbon gasification gradually decreases,from 246.2 kJ/mol for coke to 192.5 kJ/mol for iron coke 15wt%.

Metagenomic Insight Reveals the Microbial Structure and Function of the Full-Scale Coking Wastewater Treatment System:Gene-Based Nitrogen Removal

Microbial communities play crucial roles in pollutant removal and system stability in biological systems for coking wastewater(CWW)treatment,but a comprehensive understanding of their structure and functions is still lacking.A five month survey of four sequential bioreactors,anoxic 1/oxic 1/anoxic 2/oxic 2(A1/O1/A2/O2),was carried out in a full-scale CWW treatment system in China to elucidate operational performance and microbial ecology.The results showed that A1/O1/A2/O2 had excellent and stable performance for nitrogen removal.Both total nitrogen(TN;(17.38±6.89)mgL1)and ammonium-nitrogen(NH4 t-N;(2.10±1.34)mg·L^(-1))in the final biological effluent satisfied the Chinese national standards for CWW.Integrated analysis of 16S ribosome RNA(rRNA)sequencing and metagenomic sequencing showed that the bacterial communities and metagenomic function profiles of A1 and O1 shared similar functional structures,while those of A2 significantly varied from those of other bioreactors(p<0.05).The results indicated that microbial activity was strongly connected with activated sludge function.Nitrosospira,Nitrosomonas,and SM1A02 were responsible for nitrification during the primary anoxic-oxic(AO)stage and Azoarcus and Thauera acted as important denitrifiers in A2.Nitrogen cycling-related enzymes and genes work in the A1/O1/A2/O2 system.Moreover,the hao genes catalyzing hydroxylamine dehydrogenase(EC 1.7.2.6)and the napA and napB genes catalyzing nitrate reductase(EC 1.9.6.1)played important roles in the nitrification and denitrification processes in the primary and secondary AO stages,respectively.The mixed liquor suspended solids(MLSS)/total solids(TS),TN removal rate(RR),total organic carbon(TOC)(RR),and NH_(4)^(+)t-N(RR)were the most important environmental factors for regulating the structure of core bacterial genera and nitrogen-cycling genes.Proteobacteria were the potential main participants in nitrogen metabolism in the A1/O1/A2/O2 system for CWW treatment.This study provides an original and comprehensive understanding of the microbial community and functions at the gene level,which is crucial for the efficient and stable operation of the full-scale biological process for CWW treatment.

Study of the reaction mechanism for preparing powdered activated coke with SO_(2)adsorption capability via one-step rapid activation method under flue gas atmosphere

In this study,the impact of different reaction times on the preparation of powdered activated carbon(PAC)using a one-step rapid activation method under flue gas atmosphere is investigated,and the underlying reaction mechanism is summarized.Results indicate that the reaction process of this method can be divided into three stages:stage I is the rapid release of volatiles and the rapid consumption of O_(2),primarily occurring within a reaction time range of 0-0.5 s;stage II is mainly the continuous release and diffusion of volatiles,which is the carbonization and activation coupling reaction stage,and the carbonization process is the main in this stage.This stage mainly occurs at the reaction time range of 0.5 -2.0 s when SL-coal is used as material,and that is 0.5-3.0 s when JJ-coal is used as material;stage III is mainly the activation stage,during which activated components diffuse to both the surface and interior of particles.This stage mainly involves the reaction stage of CO_(2)and H2O(g)activation,and it mainly occurs at the reaction time range of 2.0-4.0 s when SL-coal is used as material,and that is 3.0-4.0 s when JJ-coal is used as material.Besides,the main function of the first two stages is to provide more diffusion channels and contact surfaces/activation sites for the diffusion and activation of the activated components in the third stage.Mastering the reaction mechanism would serve as a crucial reference and foundation for designing the structure,size of the reactor,and optimal positioning of the activator nozzle in PAC preparation.

Development of calcium coke for CaC2 production using calcium carbide slag and coking coal

A type of calcium coke was developed for use in the oxy-thermal process of calcium carbide production.The calcium coke was prepared by the co-pyrolysis of coking coal and calcium carbide slag, which is a solid waste generated from the chlor-alkali industry.The characteristics of the calcium cokes under different conditions were analyzed experimentally and theoretically.The results show that the thermal strength of calcium coke increased with the increase in the coking coal proportion, and the waterproof property of calcium coke also increased with increased carbonation time.The calcium coke can increase the contact area of calcium and carbon in the calcium carbide production process.Furthermore, the pore structure of the calcium coke can enhance the diffusion of gas inside the furnace, thus improving the efficiency of the oxy-thermal technology.

Causes Leading to Formation of Shot Cokes and Measures for Its Prevention in Super Viscous Oil Delayed Coking Unit

Shot cokes are frequently formed in the delayed coking unit treating the super viscous oil at PetroChina＇s Liaohe Petrochemical Company. Considerable work has been carded out to avoid the formation of shot cokes. The test results obtained have shown that the property of super viscous oil has played a key role in the formation of shot cokes. After adjusting and optimizing the process indices the operating regime of the delayed coking unit at a throughput of 118t/h of the super viscous oil is specified as follows： a reaction temperature of 498-502℃, a reaction pressure of 0.17-0.25 MPa, a recycle ratio of 0.5-0.6 and a fractionation tower bottom temperature of 355-365 ℃. In the meantime, the delayed coking process has adopted measures to enhance pre-fractionation of the feedstock to rationally remove light fractions and maintain a steady gas velocity in order to avoid the formation of shot cokes.

Electrochemical treatment of COD in biologically pretreated coking wastewater using Ti/RuO2-IrO2 electrodes combined with modified coke

The electrochemical treatment of COD contained in biologically pretreated coking wastewater treated by a three-dimensional electrode system with modified coke as the particle electrode was investigated. And the electrochemical perromance of the coke modified with various active components was studied. The results show that the coke modified with Fe（NO3）2 has the lowest energy consumption and higher COD removal rate under the same condition, and the modified coke has better surface characteristics for the purpose of this study. In addition, the kinetic constant was also calculated. The study shows that the three-dimensional electrode system with Fe （NO3）z-modified coke can give a satisfactory solution in biologically pretreated coking wastewater.

Probing deactivation by coking in catalyst pellets for dry reforming of methane using a pore network model

Dry reforming of methane(DRM) is an attractive technology for utilizing the greenhouse gases(CO_(2) and CH_(4)) to produce syngas. However, the catalyst pellets for DRM are heavily plagued by deactivation by coking, which prevents this technology from commercialization. In this work, a pore network model is developed to probe the catalyst deactivation by coking in a Ni/Al_(2)O_(3) catalyst pellet for DRM. The reaction conditions can significantly change the coking rate and then affect the catalyst deactivation. The catalyst lifetime is higher under lower temperature, pressure, and CH_(4)/CO_(2) molar ratio, but the maximum coke content in a catalyst pellet is independent of these reaction conditions. The catalyst pellet with larger pore diameter, narrower pore size distribution and higher pore connectivity is more robust against catalyst deactivation by coking, as the pores in this pellet are more difficult to be plugged or inaccessible.The maximum coke content is also higher for narrower pore size distribution and higher pore connectivity, as the number of inaccessible pores is lower. Besides, the catalyst pellet radius only slightly affects the coke content, although the diffusion limitation increases with the pellet radius. These results should serve to guide the rational design of robust DRM catalyst pellets against deactivation by coking.

Combination of hydrotreating and delayed coking technologies for conversion of residue

Residue conversion by combining catalytic hydrotreating and delayed coking has been evaluated comparatively with both processes alone.Optimal operating conditions are defined to achieve the greatest economic benefit for upgrading an atmospheric residue from a heavy crude oil.A literature model was adapted to simulate the hydrotreating reactor,and for delayed coking,correlations reported in the literature were used.The results with both approaches were employed to calculate the techno-economic feasibility of the combined process scheme.The combination of hydrotreating and delayed coking presented an increase in light fractions of 29% and a reduction in coke production of 47.8%.Based on the calculated net benefit values,it was demonstrated that the combination of hydrotreating and delayed coking is technically and economically better than using each process alone,with highest benefit of 57.7 USD·m^(-3).

Experiment and modeling of coke formation and catalyst deactivation in n-heptane catalytic cracking over HZSM-5 zeolites

Since paraffins catalytic cracking was of significant importance to light olefins and aromatics production,this work was intended to gain insights into the feature and model of coke formation and catalyst deactivation in n-heptane catalytic cracking over HZSM-5 zeolites. 18 tests of n-heptane catalytic cracking were designed and carried out over HZSM-5 zeolites in a wide range of operating conditions. A particular attention was paid to the measurement of the conversion, product distribution, coke content, and the porosity and acidity of the fresh and spent HZSM-5 zeolites. It was found that alkene and aromatic promoted coke formation, and it reduced the pore volume and acid site of HZSM-5 zeolites, tailoring its performance in n-heptane catalytic cracking. The specific relationship between HZSM-5 zeolites, n-heptane conversion, product distribution and coke formation was quantitively characterized by the exponential and linear function. Based on the reaction network, the coupled scheme of coke formation and catalyst deactivation were specified for n-heptane catalytic cracking. The dual-model was proposed for the process simulation of n-heptane catalytic cracking over HZSM-5 zeolites. It predicted not only the conversion and product distribution but also coke content with the acceptable errors.

The Study of the Influence of Load＇s Chemical Composition in the Coking Process on the Efficiency and the Quality of Coke

This research was performed in order to allow the study of the chemical composition influence of the coking process load on the efficiency and the quality of coke. For this reason, the coking of the following loads was realized： Atmospheric residue （RAT）, vacuum Residue （RSV） and catalytic Residue of cracking （RCC）. （The residues are obtained from an Algerian crude oil）. As the oil residues are rich for their strongly polar composition, such as the asphaltene resins, and complex structures units （SCU）, which has a role in the formation of coke, and as the dispersion of these latter improves the quality of coke, a study on the stability of aggregation was carried out by the addition of one stabilizer （oil Extract） in the coking process load, The Compounding （Extracted from/RCC oil） has been drived to the best efficiency of coke. The study consists of the influence this is characterized by the analyses Infra-red （IR） and x-ray diffraction （XRD）.

Classifying coke using CT scans and landmark multidimensional scaling

One factor that limits development of fundamental research on the infuence of coke microstructure on its strength is the difculty in quantifying the way that microstructure is both classifed and distributed in three dimensions.To support such fundamental studies,this study evaluated a novel volumetric approach for classifying small(approx.450μm^(3))blocks of coke microstructure from 3D computed tomography scans.An automated process for classifying microstructure blocks was described.It is based on Landmark Multi-Dimensional Scaling and uses the Bhattacharyya metric and k-means clustering.The approach was evaluated using 27 coke samples across a range of coke with diferent properties and reliably identifed 6 ordered class of coke microstructure based on the distribution of voxel intensities associated with structural density.The lower class(1–2)subblocks tend to be dominated by pores and thin walls.Typically,there is an increase in wall thickness and reduced pore sizes in the higher classes.Inert features are also likely to be seen in higher classes(5–6).In general,this approach provides an efcient automated means for identifying the 3D spatial distribution of microstructure in CT scans of coke.

Orientational Separation of Sulfur in Petroleum Coke by Alkali Calcining and Reflux Washing

The application of high-sulfur petroleum coke after desulfurization in aluminum electrolysis anodes is an important development trend. However, removing sulfur from high-sulfur petroleum coke is still a significant challenge.This study proposes alkali calcining and reflux washing to examine the impacts of temperature, particle size, the mass ratio of Na_(2)CO_(3) to NaOH, and total sodium addition on the desulfurization efficiency and mechanism. The results show that the desulfurization rate increases with increasing temperature, increasing total sodium content, and decreasing particle size. The addition of alkali can significantly reduce the opening-ring reaction temperature of thiophene and convert organic sulfur into inorganic sulfur(Na_(2)S). Three washing methods were compared, and reflux washing was selected to separate inorganic sulfur(Na_(2)S) from calcined petroleum coke. The sulfur content in petroleum coke decreased from 7.29% to 1.90%, with a desulfurization rate of 80.13% under optimal conditions. The petroleum coke was analyzed before and after desulfurization using X-Ray diffraction(XRD), Scanning Electron Microscopy(SEM), Infrared Spectroscopy(IR), Thermogravimetric Analysis and Differential Scanning Calorimetry(TG-DSC), Gaschromatography-mass Spectrometry(GC-MS). The results show that thiophene and benzothiophene in petroleum coke are decomposed and converted into octane and ethyl cyclohexane. These new observations are expected to provide further understanding and guidance for the utilization of highsulfur petroleum coke.

Benchmark Dose Assessment for Coke Oven Emissions-Induced Mitochondrial DNA Copy Number Damage Effects

Objective The study aimed to estimate the benchmark dose(BMD)of coke oven emissions(COEs)exposure based on mitochondrial damage with the mitochondrial DNA copy number(mtDNAcn)as a biomarker.Methods A total of 782 subjects were recruited,including 238 controls and 544 exposed workers.The mtDNAcn of peripheral leukocytes was detected through the real-time fluorescence-based quantitative polymerase chain reaction.Three BMD approaches were used to calculate the BMD of COEs exposure based on the mitochondrial damage and its 95%confidence lower limit(BMDL).Results The mtDNAcn of the exposure group was lower than that of the control group(0.60±0.29 vs.1.03±0.31;P<0.001).A dose-response relationship was shown between the mtDNAcn damage and COEs.Using the Benchmark Dose Software,the occupational exposure limits(OELs)for COEs exposure in males was 0.00190 mg/m^(3).The OELs for COEs exposure using the BBMD were 0.00170 mg/m^(3)for the total population,0.00158 mg/m^(3)for males,and 0.00174 mg/m^(3)for females.In possible risk obtained from animal studies(PROAST),the OELs of the total population,males,and females were 0.00184,0.00178,and 0.00192 mg/m^(3),respectively.Conclusion Based on our conservative estimate,the BMDL of mitochondrial damage caused by COEs is0.002 mg/m^(3).This value will provide a benchmark for determining possible OELs.

Corrosion of Basic Refractories for Glass Tanks Using Petrol Coke and Countermeasures

Replacing heavy oil with petrol coke can greatly reduce the cost of glass production,but obviously shorten the service life of refractories used in the regenerator checker body of glass tanks.To prolong the service life of the regenerator checker body,the slag chemical composition and alkali-sulfur ratio of glass tanks after using petrol coke and the damage mechanism of the residual magnesia bricks in the regenerator checker body were studied,as well as the corrosion resistance of three magnesia based bricks(direct bonded magnesia chrome bricks,fused rebonded magnesia chrome bricks,and fused rebonded high-purity magnesium aluminate spinel bricks).On this basis,a series of targeted countermeasures were adopted to optimize the configuration of refractories,significantly improving the service life of checker bricks and meeting the requirements of glass industry development.

Coking of Pt/γ-Al_(2)O_(3) catalyst in landfill gas deoxygen and its effects on catalytic performance

Catalytic oxidation of CH_(4) has been proved to be an attractive option for landfill gas(LFG) upgrading.However, coking of catalysts in catalytic LFG deoxygen has been clearly observed in industrial applications. In this regard, it is necessary to investigate whether coke deposition originates from CH_(4) or volatile organic compounds present in LFG, and the influence of coke deposition on catalytic performance. Herein,we evaluate the LFG deoxygen on Pt/γ-Al_(2)O_(3) catalyst in simulated LFG(CH_(4), CO_(2), O_(2), N_(2)) and its co-feed with representative volatile organic compounds, ethylbenzene, toluene, benzene and cyclohexane. The results show that the coking of the catalyst is originated from volatile organic compounds rather than CH_(4). The Pt/γ-Al_(2)O_(3) catalyst does not deactivate during LFG deoxygen process, even significant amount of coke deposited, up to 18.15%(mass). Characterization analyses reveal that although coke deposition overall covers the catalyst surface, resulting in mesopores blockage and a reduced number of accessible Pt sites, however, the coke formed, H-rich carbonaceous components, behaves as counterpart for O_(2) elimination. Besides, the coke deposited is mainly filamentous. Thus, coke formation has little negative effect on the overall catalytic performance of Pt/γ-Al_(2)O_(3) catalyst ultimately. The results obtained in this work are helpful for the rational design of robust Pt based catalysts for LFG deoxygen without undue attention to their coking properties, and also favor the innovation of more attractive purification scheme configurations.

燃用高碱煤锅炉受热面结焦及其防治研究概述

以准东煤为代表的高碱煤虽储量巨大,但火电机组掺烧高碱煤过程中造成锅炉受热面结焦问题突出,不仅降低锅炉热效率,而且严重威胁机组安全、稳定、经济运行。为解决结焦技术难题,促进高碱煤掺烧利用,对燃用高碱煤锅炉受热面结焦及其防治研究进行了综述。截至目前,国内外围绕燃煤锅炉受热面结焦特征、结焦机理、影响因素、防治措施等已经开展了广泛研究并取得了丰硕的研究成果。在控制燃煤质量、改善锅炉结构、优化锅炉运行等措施基础上,在锅炉受热面制备涂层成为防治结焦的重要技术途径。在未来研究过程中,涂层在具备突出抗结焦性能的同时,须兼具优良的耐高温、抗腐蚀、耐磨损、导热性、热疲劳等综合性能,且具有良好的制备经济性、制备效率,特别是现场适用性。

焦炉煤气脱碳法及甲烷化法制液化天然气的生命周期环境影响分析

作为焦化副产品,焦炉煤气富含氢气和甲烷,采用焦炉煤气制液化天然气(LNG)已成为当前焦炉煤气利用的主要途径之一。为系统评估焦炉煤气制LNG工艺的能源消耗和环境影响,尤其是碳排放,本文采用生命周期评价方法对脱碳法和甲烷化法两种焦炉煤气制LNG工艺进行系统评价。结果表明,无论采用哪种方法,LNG生产阶段均为焦炉煤气制LNG工艺生命周期环境负荷的控制阶段;在脱碳法工艺中,中压蒸汽是环境影响贡献的关键物质,可通过干熄焦回收红焦余热副产蒸汽补充LNG生产消耗来降低环境负荷;在甲烷化工艺中,电力为主要贡献物质,在碳排放中占比41.09%,若采用可再生能源电力(太阳能发电、风电、水电)替代后环境影响显著降低;相比于脱碳法,采用甲烷化工艺环境性能更优,主要源于甲烷增产优势。本文研究结果可从生命周期角度为焦化行业焦炉煤气的综合利用提供理论支持。

煤液化残渣诱导缩聚制备冶金焦的影响因素

煤液化残渣所含沥青质和重油在热解时可产生大量自由基,如不能被及时稳定和缩聚将转化为大量焦油和气体,形成孔隙结构,从而影响所制冶金焦密度。为此,拟引入添加剂诱导其高效缩聚,提高聚合物密度,再经炭化后制备优质冶金焦。通过系统研究不同添加剂(糠醛、甲醇、呋喃和羟基丙酮)、温度(350、400、450、500和550℃)、停留时间(0、30、60和120 min)和添加量(0、4、8和16 g)对所制聚合物缩聚率、结构性质、密度、热稳定性和表面性质影响,获得煤液化残渣诱导缩聚的最优试验条件。在最优条件下,分别探讨所制聚合物和炭化物的表面形貌、微晶结构和元素变化情况,获得煤液化残渣诱导缩聚机理。结果表明,添加剂(糠醛)的诱导缩聚效果最佳,其次是羟基丙酮,因而理想添加剂至少应含有1个醛基或酮基。不同添加剂可促进煤液化残渣缩聚,提高所制聚合物比表面积、孔容、平均孔径和真密度。温度和停留时间对煤液化残渣/糠醛聚合物热稳定性和表面性质影响较大,温度升高和停留时间延长可促进煤液化残渣所含酚类基团和芳香物中H参与缩聚反应,提高聚合物的缩聚程度。煤液化残渣/糠醛(焦炭)整体呈片层密实状,并含更多无定形碳。