Analysis and optimization of stamping and forming process of bearing outer ring

To address the common issues of wrinkling,tearing,and uneven wall thickness in the actual sheet metal stamp-ing process of the outer ring of needle roller bearings,this study analyzes critical technical indicators such asforming limits,thickness distribution,and principal strains in the forming process in detail.Three-dimensionalmodels of the concave and convex dies were constructed.The effects of different process parameters,includingstamping speed,edge pressure,sheet metal thickness,and friction coefficient,on the quality of the forming partswere investigated by varying these parameters.Subsequently,the orthogonal experimental method was used todetermine an optimal experimental group from multiple sets of experiments.It was found that under the processparameters of a stamping speed of 3000 mm/s,edge pressure of 2000 N,sheet metal thickness of 0.9 mm,andfriction coefficient of 0.125,the forming quality of the outer ring of the bearing is ideal.

Dendritic spine degeneration:a primary mechanism in the aging process

Recent reports suggest that aging is not solely a physiological process in living beings;instead, it should be considered a pathological process or disease(Amorim et al., 2022). Consequently, this process involves a wide range of factors, spanning from genetic to environmental factors, and even includes the gut microbiome(GM)(Mayer et al., 2022). All these processes coincide at some point in the inflammatory process, oxidative stress, and apoptosis, at different degrees in various organs and systems that constitute a living organism(Mayer et al., 2022;AguilarHernández et al., 2023).

Prediction and optimization of flue pressure in sintering process based on SHAP

Sinter is the core raw material for blast furnaces.Flue pressure,which is an important state parameter,affects sinter quality.In this paper,flue pressure prediction and optimization were studied based on the shapley additive explanation(SHAP)to predict the flue pressure and take targeted adjustment measures.First,the sintering process data were collected and processed.A flue pressure prediction model was then constructed after comparing different feature selection methods and model algorithms using SHAP+extremely random-ized trees(ET).The prediction accuracy of the model within the error range of±0.25 kPa was 92.63%.SHAP analysis was employed to improve the interpretability of the prediction model.The effects of various sintering operation parameters on flue pressure,the relation-ship between the numerical range of key operation parameters and flue pressure,the effect of operation parameter combinations on flue pressure,and the prediction process of the flue pressure prediction model on a single sample were analyzed.A flue pressure optimization module was also constructed and analyzed when the prediction satisfied the judgment conditions.The operating parameter combination was then pushed.The flue pressure was increased by 5.87%during the verification process,achieving a good optimization effect.

An Unprecedented Efficiency with Approaching 21%Enabled by Additive‑Assisted Layer‑by‑Layer Processing in Organic Solar Cells

Recently published in Joule,Feng Liu and colleagues from Shanghai Jiaotong University reported a record-breaking 20.8%power conversion efficiency in organic solar cells(OSCs)with an interpenetrating fibril network active layer morphology,featuring a bulk p-in structure and proper vertical segregation achieved through additive-assisted layer-by-layer deposition.This optimized hierarchical gradient fibrillar morphology and optical management synergistically facilitates exciton diffusion,reduces recombination losses,and enhances light capture capability.This approach not only offers a solution to achieving high-efficiency devices but also demonstrates the potential for commercial applications of OSCs.

Processing,microstructure,and mechanical properties of wire arc additively-manufactured AZ91 magnesium alloy using cold arc process

Thin walls of an AZ91 magnesium alloy with fine equiaxed grains were fabricated via cold arc-based wire arc additive manufacturing(CA-WAAM),and the droplet transfer behaviours,microstructures,and mechanical properties were investigated.The results showed that the cold arc process reduced splashing at the moment of liquid bridge breakage and effectively shortened the droplet transfer period.The microstructures of the deposited samples exhibited layered characteristics with alternating distributions of coarse and fine grains.During layer-by-layer deposition,the β-phase precipitated and grew preferentially along grain boundaries,while the fineη-Al_(8)Mn_(5)phase was dispersed in the α-Mg matrix.The mechanical properties of the CA-WAAM deposited sample showed isotropic characteristics.The ultimate tensile strength and elongation in the building direction(BD)were 282.7 MPa and 14.2%,respectively.The microhardness values of the deposited parts were relatively uniform,with an average value of HV 69.6.

Influence of material characteristics on the failure mode and process of landslide dam

Landslide dams,as frequent natural hazards,pose significant risks to human lives,property,and ecological environments.The grading characteristics and density of dam materials play a crucial role in determining the stability of landslide dams and the potential for dam breaches.To explore the failure mechanisms and evolutionary processes of landslide dams with varying soil properties,this study conducted a series of flume experiments,considering different grain compositions and material densities.The results demonstrated that grading characteristics significantly influence landslide dam stability,affecting failure patterns,breach processes,and final breach morphologies.Fine-graded materials exhibited a sequence of surface erosion,head-cut erosion,and subsequent surface erosion during the breach process,while well-graded materials typically experienced head-cut erosion followed by surface erosion.In coarse-graded dams,the high permeability of coarse particles allowed the dam to remain stable,as inflows matched outflows.The dam breach model experiments also showed that increasing material density effectively delayed the breach and reduced peak breach flow discharge.Furthermore,higher fine particle content led to a reduction in the residual dam height and the base slope of the final breach profile,although the relationship between peak breach discharge and the content of fine and coarse particles was nonlinear.To better understand breach morphology evolution under different soil characteristics and hydraulic conditions,three key points were identified—erosion point,control point,and scouring point.This study,by examining the evolution of failure patterns,breach processes,and breach flow discharges under various grading and density conditions,offers valuable insights into the mechanisms behind landslide dam failures.

New digital drilling process monitoring: Instrumentation, validation and calibration

This study aims to enhance the digital drilling process monitoring(DPM)or monitoring while drilling(MWD)technique,which is a widely recognized method in geological exploration for evaluating rock mass quality.First,robust displacement and torque measurement facilities for rotary-core drilling are discussed.The conventional cable encoder for displacement measurement is replaced with a magnetostrictive displacement sensor,which is more reliable in harsh field drilling environments.This enables the measurement of the bit position with an accuracy of<1 mm.Most importantly,this new instrument is proven to be successful in improving the detection of structural discontinuities with thicknesses>1 mm.In addition,by measuring the electric current of the driving motor,the torque applied to the bit is conveniently and accurately converted.These innovations ensure high-quality data collection for DPM practices.Second,two indices derived from DPM are proposed to quantitatively describe rock mass quality.The specific energy index(SEI)and specific penetration index(SPI)are based on the principles of energy conservation and Mohr-Coulomb failure criterion,respectively.Extensive field tests conducted in a dam grouting area confirm a linear relationship between the thrust force and penetration per rotation,and between the torque and penetration per rotation.The correlation ratios of the related regressions are typically>0.9.These two indices allow for the quantitative interpretation of DPM data into rock mechanics characteristics,such as uniaxial compressive strength,rock quality designation(RQD),and rock mass permeability,eliminating the need for subjective judgment normally involved in the currently used rock mass quality rating approaches.

A new multi-DOF envelope forming process for fabricating spiral bevel gears with back taper tooth

Spiral bevel gears are critical transmission components,and are widely used in the aerospace field.This paper proposes a new multi-DOF envelope forming process for fabricating spiral bevel gears.Firstly,the multi-DOF envelope forming principle of spiral bevel gears is proposed.Secondly,the design methods for the envelope tool geometry and movement are proposed based on the envelope geometry and movement relationships.Thirdly,the metal flow and tooth filling laws are revealed through 3D FE simulation of the multi-DOF envelope forming process of a typical spiral bevel gear.Fourthly,a new method for separating the envelope tool and the formed spiral bevel gear with back taper tooth is proposed to avoid their interference.Finally,experiments on multi-DOF envelope forming of this typical spiral bevel gear are conducted using new heavy load multi-DOF envelope forming equipment.The simulation and experimental results show the feasibility of the proposed multi-DOF envelope forming process for fabricating spiral bevel gears with back taper tooth and the corresponding process design methods.

Towards a blank design method for manufacturing big-tapered profiled ring disk by spinning-rolling process

The big-tapered profiled ring disk is a key component of engines for rockets and missiles.A new forming technology,as called spinning-rolling process,has been proposed previously for the high performance,high efficiency and low-cost manufacturing of the component.Blank design is the key part of plastic forming process design.For spinning-rolling process,the shape and size of the blank play a crucial role in process stability,deformation behavior and dimensional accuracy.So this work proposes a blank design method to determine the geometry structure and sizes of the blank.The mathematical model for calculating the blank size has been deduced based on volume conservation and neutral layer length invariance principle.The FE simulation and corresponding trial production of an actual big-tapered profiled ring disk show that the proposed blank design method is applicative.In order to obtain a preferred blank,the influence rules of blank size determined by different deformation degrees(rolling ratio k)on the spinning-rolling process are revealed by comprehensive FE simulations.Overall considering the process stability,circularity of the deformed ring disk and forming forces,a reasonable range of deformation degree(rolling ratio k)is recommended for the blank design of the new spinning-rolling process.

Formability of aluminum-silicon coated boron steel in hot stamping process

Flow behavior of the Al-Si coated boron steel was investigated with Gleeble-3500,in comparison with the uncoated one.Effect of deformation conditions on the coating integrity was characterized by optical microscopy.Facture surfaces of the coated steels were inspected under SEM.Experimental results indicate that the ultimate tensile strength and ductility of the Al-Si coated boron steel are lower than those of the uncoated steel under test conditions.Extensive cracks occur in the coating after tensile tests;the width and density of cracks are sensitive to the deformation temperatures and strain rates.The bare substrate exposed between the separate coating segments is oxidized.Appearance of the oxide degrades the Al-Si coating adhesion.Remarkable difference between formability of the coating layer and the substrate is confirmed.The formability of the Al-Si coating could be optimized by controlling the phase transformation of the ductile Fe-rich intermetallic compounds within it during the austenization.

OPTIMIZATION OF AUTOBODY PANEL STAMPING PROCESS BASED ON DYNAMIC EXPLICIT FINITE ELEMENT METHOD

Taking CPU time cost and analysis accuracy into account, dynamic explicit finite ele- ment method is adopted to optimize the forming process of autobody panels that often have large sizes and complex geometry. In this paper, for the sake of illustrating in detail how dynamic explicit finite element method is applied to the numerical simulation of the autobody panel forming process,an example of optimization of stamping process pain meters of an inner door panel is presented. Using dynamic explicit finite element code Ls-DYNA3D, the inner door panel has been optimized by adapting pa- rameters such as the initial blank geometry and position, blank-holder forces and the location of drawbeads, and satisfied results are obtained.

Process Simulate软件在自动化生产线安装调试课程中的应用

针对自动化生产线安装调试课程的实践教学难题提出了使用仿真软件进行虚拟装调的方案。介绍了如何使用Process Simulate软件对自动化生产线进行虚拟装调。实践证明,使用Process Simulate软件能够有效提高自动化生产线安装调试课程的实践教学效果。

基于Arduino与Processing的心率检测计设计研究

随着社会经济的高速发展,人们的物质生活也有了极大的提高,但同时也伴随着各种疾病的到来,身体健康已经成为人们普遍关注的焦点,因此,心率检测仪、血压计、血糖仪等各种家用医疗监测仪器已经逐渐融入日常生活。心脏病是人们难以预防的突发致命疾病之一,本文介绍的是一款基于Arduino【是基于易用硬件和软件的原型开源平台,包由可编程的电路板(简称微控制器),以及集成开发环境(称为Arduino IDE)的现成软件组成】Processing(开源编程语言,包括编辑器、编译器、展示器)的简易心率检测计系统,其功能实用、操作简单,可以测量心率,当超出正常心率范围时及时预警,是一款便携的实时心率测试仪。

Application of Decision Tree Algorithm in Stamping Process

Various process parameters exert different effects in stamping process. In order to study the relationships among the process parameters of box stamping process, including the blank holder force, friction coefficient, depth of drawbead, offset and length of drawbead, the decision tree algorithm C4.5 was performed to generate the decision tree using the result data of the box stamping simulation. The design and improvement methods of the decision tree were presented. Potential and valuable rules were generated by traversing the decision tree, which plays an instructive role on the practical design. The rules show that the correct combination of blank holder force and setting of drawbead are the dominant contribution for controlling the cracking and wrinkling in box stamping process. In order to validate the rules, the stamping process for box was also performed. The experiment results show good agreement with the generated rules.

Research on Fuzzy Synthetic Evaluation of Stamping Process Scheme

Stamping process,which is widely used in automobile,aerospace,machine-building industries,and etc.,is a creative process needing time and experiences.The lead time is mainly spent on stamping die design and manufacturing.As the ba- sis of die design,process design is a non-linearity and creative process,which can be solved by using the fuzzy synthetic evaluation. In this paper,the potential o f fuzzy synthetic evaluation for dealing with stamping process design was explored.The influencing factor set,factor weight set,evaluation set,single factor fuzzy evaluation matrix,and fuzzy synthetic evaluation scheme were studied.Finally,the washer part,considering forming equipment,part dimensions and other factors,was selected to testify the evaluation process.

An Intelligent Master Model of Computer Aided Process Planning for Large Complicated Stampings

Process planning for large complicated stampings is more complicated, illegible and multiform than that for common stampings. In this paper, an intelligent master model of computer aided process planning （CAPP） for large complicated stampings has been developed based on knowledge based engineering （KBE） and feature technology. This innovative model consists of knowledge base （KB）, process control structure （PCS）, process information model （PIM）, multidisciplinary design optimization （MDO）, model link environment （MLE） and simulation engine （SE）, to realize process planning, optimization, simulation and management integrated to complete intelligent CAPP system. In this model, KBE provides knowledge base, open architecture and knowledge reuse ability to deal with the multi-domain and multi-expression of process knowledge, and forms an integrated environment. With PIM, all the knowledge consisting of objects, constraints, cxtmricncc and decision-makings is carried by object-oriented method dynamically for knowledge-reasoning. PCS makes dynamical knowledge modified and updated timely and accordingly. MLE provides scv. cral methods to make CAPP sysmm associated and integrated. SE provides a programmable mechanism to interpret simulation course and result. Meanwhile, collaborative optimization, one method of MDO, is imported to deal with the optimization distributed for multiple purposes. All these make CAPP sysmm integrated and open to other systems, such as dic design and manufacturing system.

Effect of solution treatment time on plasticity and ductile fracture of 7075 aluminum alloy sheet in hot stamping process

The effect of solution treatment time on the post-formed plasticity and ductile fracture of 7075 aluminum alloy in the hot stamping process was studied.Tensile tests were conducted on the specimens subjected to the hot stamping process with different solution treatment time.The digital image correlation(DIC)analysis was used to obtain the strain of the specimen.Based on the experiments and modeling,the Yld2000-3d yield criterion and the DF2014 ductile fracture criterion were calibrated and used to characterize the anisotropy and fracture behavior of the metal,respectively.Furthermore,the microstructure of specimens was studied.The experimental and simulation results indicate that the 7075 aluminum alloy retains distinct anisotropy after the hot stamping process,and there is no obvious effect of extending the solution treatment time on the material anisotropy.However,it is found that a longer solution treatment time can increase the fracture strain of the aluminum alloy during the hot stamping process,which may be related to the decrease of the second-phase particles size.

Multi-objective optimization of stamping forming process of head using Pareto-based genetic algorithm

To obtain the optimal process parameters of stamping forming, finite element analysis and optimization technique were integrated via transforming multi-objective issue into a single-objective issue. A Pareto-based genetic algorithm was applied to optimizing the head stamping forming process. In the proposed optimal model, fracture, wrinkle and thickness varying are a function of several factors, such as fillet radius, draw-bead position, blank size and blank-holding force. Hence, it is necessary to investigate the relationship between the objective functions and the variables in order to make objective functions varying minimized simultaneously. Firstly, the central composite experimental(CCD) with four factors and five levels was applied, and the experimental data based on the central composite experimental were acquired. Then, the response surface model(RSM) was set up and the results of the analysis of variance(ANOVA) show that it is reliable to predict the fracture, wrinkle and thickness varying functions by the response surface model. Finally, a Pareto-based genetic algorithm was used to find out a set of Pareto front, which makes fracture, wrinkle and thickness varying minimized integrally. A head stamping case indicates that the present method has higher precision and practicability compared with the "trial and error" procedure.

Optimization of Process Parameters for Cracking Prevention of UHSS in Hot Stamping Based on Hammersley Sequence Sampling and Back Propagation Neural Network-Genetic Algorithm Mixed Methods

In order to prevent cracking appeared in the work-piece during the hot stamping operation,this paper proposes a hybrid optimization method based on Hammersley sequence sampling( HSS),finite analysis,backpropagation( BP) neural network and genetic algorithm( GA). The mechanical properties of high strength boron steel are characterized on the basis of uniaxial tensile test at elevated temperatures. The samples of process parameters are chosen via the HSS that encourages the exploration throughout the design space and hence achieves better discovery of possible global optimum in the solution space. Meanwhile, numerical simulation is carried out to predict the forming quality for the optimized design. A BP neural network model is developed to obtain the mathematical relationship between optimization goal and design variables,and genetic algorithm is used to optimize the process parameters. Finally,the results of numerical simulation are compared with those of production experiment to demonstrate that the optimization strategy proposed in the paper is feasible.

Integrated Modelling of Microstructure Evolution and Mechanical Properties Prediction for Q&P Hot Stamping Process of Ultra‑High Strength Steel

High strength steel products with good ductility can be produced via Q&P hot stamping process,while the phase transformation of the process is more complicated than common hot stamping since two-step quenching and one-step carbon partitioning processes are involved.In this study,an integrated model of microstructure evolution relating to Q&P hot stamping was presented with a persuasively predicted results of mechanical properties.The transformation of diffusional phase and non-diffusional phase,including original austenite grain size individually,were considered,as well as the carbon partitioning process which affects the secondary martensite transformation temperature and the subsequent phase transformations.Afterwards,the mechanical properties including hardness,strength,and elongation were calculated through a series of theoretical and empirical models in accordance with phase contents.Especially,a modified elongation prediction model was generated ultimately with higher accuracy than the existed Mileiko’s model.In the end,the unified model was applied to simulate the Q&P hot stamping process of a U-cup part based on the finite element software LS-DYNA,where the calculated outputs were coincident with the measured consequences.