Soil properties and not plant factors affect both abundant and rare microbial taxa after thinning in a mixed stand of Cunninghamia lanceolata and Sassafras tzumu

Thinning is an effective management step for sustainable forest development,yet less attention is paid to the restoration of soil microbiota after thinning.In this study,both abundant and rare soil microbial communities(i.e.,bacterial,fungal),were evaluated under various thinning treatments in a mixed stand of Cunninghamia lanceolata and Sassafras tzumu using Mi Seq sequencing.Thinning did not significantly change either abundant or rare bacterial and fungal community composition,but affected their alpha diversity.The Shannon–Wiener indexes of rare fungal taxa under medium thinning were significantly lower than in the light thinning(P<0.05 level).Xanthobacteraceae dominated the abundant bacterial taxa,and Saitozyma and Mortierlla the abundant fungal taxa.The most common rare bacterial taxa varied;there was no prevalent rare fungal taxa under different thinnings.In addition,soil available nitrogen,total phosphorus,and p H had significant effects on rare bacterial taxa.Nutrients,especially available phosphorus,but not nitrogen,affected abundant and rare soil fungi.The results indicate that soil properties rather than plant factors affect abundant and rare microbial communities in soils of mixed stands.Thinning,through mediating soil properties,influences both abundant and rare bacterial and fungal communities in the mixed C.lanceolata and S.tzumu stand.

Impact of cattle density on the structure and natural regeneration of a turkey oak stand on an agrosilvopastoral farm in central Italy

On an agrosilvopastoral farm in central Italy where Maremmana cattle graze in Turkey oak forests,we evaluated the impact of different livestock densities on stand structure,tree diversity and natural regeneration in four types of grazed areas based on the grazing regime adopted:calf-grazed,high-intensity-grazed,low-intensity-grazed,ungrazed control.For each area,we set up three permanent circular plots(radius of 15 m)to survey the structural and dasometric characteristics of the overstorey,understorey,and regeneration layer.The results showed that grazing negatively affected the complexity of the forest structure and its potential to regenerate and maintain a high level of biodiversity.The differences in stand structure observed between the grazing areas were closely related to livestock density.The most sensitive components of the system were the understorey and the regeneration layers.Contrarily,the current grazing management did not affect the dominant tree structure or its composition.Our findings identified medium-term monitoring and regeneration management as the two significant aspects to consider when assessing sustainable livestock.New forests can be established by excluding graz-ing for about 20–25 years.

Study on Free-Standing Riser Under Different Working Conditions Based on 3D Co-Rotational Beam Element

When the free standing riser(FSR)is in service in the ocean,its mechanical properties are affected by various factors,including complex ocean current forces,buoyancy of the buoyancy can,and torque caused by the deflection of the upper floating body.These loads have a great influence on the deformation and internal force of the FSR.The static performance of FSR is investigated in this research under various working conditions.The finite element model of FSR is established based on the co-rotational method.The arc length approach is used to solve the model.The load is exerted in increments.The current load on the riser changes with the configuration of the riser.The accuracy of the numerical method is verified by Abaqus software.The calculation time is also compared.Then,the effects of uniform current,actual current and floating body yaw motion on FSR are studied by parameter analysis.Additionally,the influence of the FSR on the ocean current after the failure of part of the buoyancy can chamber is analyzed.The results show that the numerical model based on the co-rotational method can effectively simulate the large rotation and torsion behavior of FSR.This method has high computational efficiency and precision,and this method can quickly improve the efficiency of numerical calculation of static analysis of deep-water riser.The proposed technology may serve as an alternative to the existing proprietary commercial software,which uses a complex graphical user interface.

The effects of data aggregation on long-term projections of forest stands development

Forest management planning often relies on Airborne Laser Scanning(ALS)-based Forest Management Inventories(FMIs)for sustainable and efficient decision-making.Employing the area-based(ABA)approach,these inventories estimate forest characteristics for grid cell areas(pixels),which are then usually summarized at the stand level.Using the ALS-based high-resolution Norwegian Forest Resource Maps(16 m×16 m pixel resolution)alongside with stand-level growth and yield models,this study explores the impact of three levels of pixel aggregation(standlevel,stand-level with species strata,and pixel-level)on projected stand development.The results indicate significant differences in the projected outputs based on the aggregation level.Notably,the most substantial difference in estimated volume occurred between stand-level and pixel-level aggregation,ranging from-301 to+253 m^(3)·ha^(-1)for single stands.The differences were,on average,higher for broadleaves than for spruce and pine dominated stands,and for mixed stands and stands with higher variability than for pure and homogenous stands.In conclusion,this research underscores the critical role of input data resolution in forest planning and management,emphasizing the need for improved data collection practices to ensure sustainable forest management.

Assessing cutter-rock interaction during TBM tunnelling in granite:Large-scale standing rotary cutting tests and 3D DEM simulations

The widespread utilisation of tunnel boring machines(TBMs)in underground construction engineering requires a detailed investigation of the cutter-rock interaction.In this paper,we conduct a series of largescale standing rotary cutting tests on granite in conjunction with high-fidelity numerical simulations based on a particle-type discrete element method(DEM)to explore the effects of key cutting parameters on the TBM cutter performance and the distribution of cutter-rock contact stresses.The assessment results of cutter performance obtained from the cutting tests and numerical simulations reveal similar dependencies on the key cutting parameters.More specifically,the normal and rolling forces exhibit a positive correlation with penetration but are slightly influenced by the cutting radius.In contrast,the side force decreases as the cutting radius increases.Additionally,the side force shows a positive relationship with the penetration for smaller cutting radii but tends to become negative as the cutting radius increases.The cutter's relative effectiveness in rock breaking is significantly impacted by the penetration but shows little dependency on the cutting radius.Consequently,an optimal penetration is identified,leading to a low boreability index and specific energy.A combined Hertz-Weibull function is developed to fit the cutter-rock contact stress distribution obtained in DEM simulations,whereby an improved CSM(Colorado School of Mines)model is proposed by replacing the original monotonic cutting force distribution with this combined Hertz-Weibull model.The proposed model outperforms the original CSM model as demonstrated by a comparison of the estimated cutting forces with those from the tests/simulations.The findings from this work that advance our understanding of TBM cutter performance have important implications for improving the efficiency and reliability of TBM tunnelling in granite.

Runoff Characteristics of Different Stands in Dongjiang Lake Reservoir Area

Different forest stands in the Dongjiang Lake Reservoir area of Zixing were selected as the research objects to study the characteristics of runoff generation in different forest stands.The results showed that there was no significant difference in annual runoff among M3,M1,and M5,and no significant difference between each forest stand and the control.The order was M3(22.75 mm)>M1(21.77 mm)>M5(20.14 mm).Forest vegetation generates less runoff through vegetation restoration compared to the control,indicating that forest vegetation reconstruction and restoration are beneficial for soil and water conservation.

Simulation of Haloxylon Ammodendron Stand Basic Diameter Structure Based on Fuzzy Distribution Function

Based on the investigation data of 12 Haloxylon ammodendron plots in the south edge of Gurbantunggut Desert, Fuzzy distribution was introduced into the study of Haloxylon ammodendron base diameter structure fitting according to the consistency between the characteristics of Fuzzy distribution function and the distribution series of cumulative percentage of stand base diameter, and the fitting precision and effect of Fuzzy distribution function were discussed. The root mean square error RMSE and determination coefficient R2 values showed that Fuzzy-Γ1, Fuzzy-Γ2, Fuzzy-Γ3, Fuzzy-Γ4 had good fitting performance, among which Fuzzy-Γ1 had relatively high fitting precision, and its parameters were closely related to stand age and density, Fuzzy-Γ2 distribution function was the second, and Fuzzy-Γ4 distribution function had the worst fitting effect. By introducing a parameter c from the similarity of four distribution function formulas, a generalized Fuzzy distribution function Fuzzy-Γ5 is obtained. This function shows the highest fitting accuracy. Most of the values of parameter c are near 1 or 2, which shows that the diameter distribution is mainly approximate to Fuzzy-Γ1 and Fuzzy-Γ2.

Fabrication of Free Standing Nanocellulose Film via Spray Coating and its Biomedical Application: A Review

Spraying nanocellulose onto films provides a quick and scalable way to create free-standing films with exceptional consistency and customizable thickness. This method increases the application of nanocellulose films in various industries and satisfies the requirements of large-scale production. In the field of biomedicine, spray-coated free-standing nanocellulose films hold great promise for applications such as drug delivery, tissue engineering, wound healing, device coatings, and biosensing. They are excellent nanomaterials for a variety of biomedical applications due to their special qualities, including biocompatibility, high mechanical strength, porous structure, large surface area, and adaptability. This paper reviewed the detailed exposure of the spray coating process of nanocellulose suspension onto free- standing films and its biomedical applications.

Effects of Standing Time during Pretreatment on the Nitrite Concentration Detected by Spectrophotometric Method

Food safety problems caused by excessive nitrite addition have been frequently reported and the detection of nitrite in food is particularly important. The standing time during the pretreatment of primary sample has a great influence on the concentration of nitrite tested by spectrophotometric method. In this context, three kinds of food samples are prepared, including canned mustard, canned fish and home-made pickled water. A series of standing times are placed during the sample pretreatments and the corresponding nitrite contents in these samples are detected by spectrophotometric method based on N-ethylenediamine dihydrochloride. This study aims to find out a reasonable standing time during the pretreatment of food sample, providing influence factor for precise detection of nitrite.

Existence and Stability of Standing Waves for the Nonlinear Schrödinger Equation with Combined Nonlinearities and a Partial Harmonic Potential

In this paper, we study the existence of standing waves for the nonlinear Schrödinger equation with combined power-type nonlinearities and a partial harmonic potential. In the L2-supercritical case, we obtain the existence and stability of standing waves. Our results are complements to the results of Carles and Il’yasov’s artical, where orbital stability of standing waves have been studied for the 2D Schrödinger equation with combined nonlinearities and harmonic potential.

Overlying strata movement of recovering standing pillars with solid backfilling by physical simulation

To analyze the overlying strata movement law of recovering room mining standing pillars with solid backfilling.Physical simulation experiments with sponge and wood as the backfilling simulation material were tested.The results show that:(i) The covering-rock mechanics of the overly strata comes from "two-arch structures + hinged girder + bend beam" to "backfilling material + hinged girder + bent beam" by increasing the fill ratio from 0%to 85%,the beginning of overlying strata movement appears later and the total duration of subsidence velocity increased from zero to the highest value increases.The trend of "single polarization" of the subsidence velocity curves becomes noticeable and the velocity variation trend becomes stable,(ii) The equiponderate aeolian sand was added to improve the anti-pressure ability of the loess,and the corresponding ground processing & transportation system was designed.

Temporal Optimality of a Via-Posture on Trajectory during Sit-to-Stand and Back-to-Sit Movements

The purpose of this study was to examine the hypothesis that the minimum angle-jerk with via-point model could account for the temporal consistency of kinematics in sit-to-stand (STS) and back-to-sit (BTS) movements. The positions of bony landmarks on the subjects during the tasks were recorded using a Vicon motion analysis system to yield the angular displacement and position of the center of mass (COM) of a three-link rigid body model in the sagittal plane. Minimum angle-jerk and minimum jerk trajectories with a via-point were computed for joint angle and COM, respectively. Five to six candidate points were selected as the via-point from the measured trajectory based on the separate kinematic events. The results show the optimal angular trajectories using the via-points (via-angles) before the seat-off for STS, and at around the seat-contact for BTS resembles the measured angular trajectories well, indicating that the posture at the via-point was temporally optimal to produce the minimum angle-jerk trajectory for both movements. It is hypothesized that the multi-joint angular patterns during STS and BTS movements were organized to pass through the via-point, namely the via-posture along the minimum angle-jerk trajectory.

Eff ects of stand condition and root density on fi ne-root dynamics across root functional groups in a subtropical montane forest

Fine roots play key roles in belowground C cycling in terrestrial ecosystems.Based on their distinct functions,fi ne roots are either absorptive fi ne roots(AFRs)or transport fi ne roots(TFRs).However,the function-based fi ne root dynamics of trees and their responses to forest stand properties remain unclear.Here,we studied the dynamics of AFRs and TFRs and their responses to stand conditions and root density in a subtropical montane mixed forest based on a 2-a root window experiment.Mean(±SE)annual production,mortality,and turnover rate of AFRs were 7.87±0.17 m m^(−2)a^(−1),8.13±0.20 m m^(−2)a^(−1)and 2.96±0.24 a^(−1),respectively,compared with 7.09±0.17 m m^(−2)a^(−1),4.59±0.17 m m^(−2)a^(−1),and 2.01±0.22 a^(−1),respectively,for TFRs.The production and mortality of fi ne roots were signifi cantly higher in high root-density sites than in low-root density sites,whereas the turnover of fi ne roots was faster in the low root-density sites.Furthermore,root density had a larger positive eff ect than other environmental factors on TFR production but had no obvious impact on AFR production.Tree species diversity had an apparent positive eff ect on AFR production and was the crucial driver of AFR production,probably due to a complementary eff ect,but had no evident impact on TFR.Both tree density and tree species diversity were positively correlated with the mortality of AFRs and negatively related to the turnover of TFRs,suggesting that higher root density caused stronger competition for rooting space and that plants tend to reduce maintenance costs by decreasing TFR turnover.These fi ndings illustrated the importance of root functional groups in understanding root dynamics and their responses to changes in environmental conditions.

Helical streamers guided by surface electromagnetic standing waves

The streamer that is driven by the specific pulse DC discharge parameters can stably form a three-dimensional helical plasma channel in a long dielectric tube in the low-temperature plasma experiment,in cases when there were neither external background magnetic field or other factors that destroyed the poloidal symmetry of the tube.The formation mechanism and chirality of helical streamers are discussed according to the surface electromagnetic standing wave theory.The shape of the helical streamers and the characteristics of helical branches are quantitatively analyzed to further expand the application of plasma and streamer theory in the helix problem and chiral catalytic synthesis.

FM:CHINA BACKS HUAWEI TO STAND UP

China supports relevant companies and individuals in seeking legal action to protect their interests and refusing to be victimized like“silent lambs,”declared Chinese State Councilor and Foreign Minister Wang Yi on March 8.

Changes in the growth of Scots pine(Pinus sylvestris L.)stands in an urban environment in European Russia since 1862

A century and a half ago,in the European part of Russia(Moscow),forest scientists established the first long-term observations of forests,many of which are under observation to the present day.In the twentieth century,climate changes and,due to industrial development,forest areas were under air pollution.Based on observations from 157 sites,this study shows that the growth and density of Scots pine(Pinus sylvestris L.)have decreased by the end of the twentieth century.The environment has changed,and the growth and development of plantations has slowed.Pine yields(-34%stand volume)and their life expectancy(on average 50 years)have decreased.These changes are critical for forestry and for the management of forests in urban centers.Due to the decline in growth,ecosystem functions by urban forests has decreased.In order to increase the sustainability of urban forests and the provision of ecosystem services,it is preferable to create multi-species stands with a complex structure.

Uniaxial compressive behaviour of a FRP standing support made of mine wastes

Twenty-seven specimens were tested to investigate the uniaxial compression behaviour of an innovative standing support for underground space applications.The innovative standing support consisted of an external fibre reinforced polymer(FRP)jacket and the infill column made of cementitious grout,tailings and coal wash rejects.Effects of the FRP layers number and water to the cementitious grout(w/g)ratio were evaluated.Test results indicated that lower w/g ratios produced stronger infill columns.With FRP confinement,the standing support demonstrated strain-hardening loading characteristics with a significant improvement in both strength and ductility.The highest strength and strain of the specimens achieved was 58.4 MPa and 11.8%respectively.Compared with the unconfined specimens,the confinement with four FRP layers increased the specimen strength and associated strain up to 3.6 and 27.0 times respectively.A correlation between the compressive strength of the infill material and the ultrasonic pulse velocity was also investigated.Furthermore,a simple design-oriented model was proposed to predict the peak strength and the corresponding strain of the innovative standing support.

Optimization models of stand structure and selective cutting cycle for large diameter trees of broadleaved forest in Changbai Mountain

The optimum models of harvesting yield and net profits of large diameter trees for broadleaved forest were developed, of which include matrix growth sub-model, harvesting cost and wood price sub-models, based on the data from Hongshi Forestry Bureau, in Changbai Mountain region, Jilin Province, China. The data were measured in 232 permanent sample plots. With the data of permanent sample plots, the parameters of transition probability and ingrowth models were estimated, and some models were compared and partly modified. During the simulation of stand structure, four factors such as largest diameter residual tree （LDT）, the ratio of the number of trees in a given diameter class to those in the next larger diameter class （q）, residual basal area （RBA） and selective cutting cycle （C） were considered. The simulation results showed that the optimum stand structure parameters for large diameter trees are as follows： q is 1.2, LDT is 46cm, RBA is larger than 26 m^2 and selective cutting cycle time （C） is between 10 and 20 years.

Soil heterotrophic respiration in Casuarina equisetifolia plantation at different stand ages

The soil respiration rates （Rh） in 6-year-old （young）, 17-year-old （middle-age）, 31-year-old （mature） Casuarina equisetifolia coastal plantations were measured using an LICOR-8100 automated soil CO2 flux system from May 2006 to April 2007. Results show that Rh displayed an obvious seasonal pattern across the observed years. The maximum values of Rh occurred at June and July and the minimum at December and January. Soil temperature and soil moisture as well as their interaction had significant effects on the monthly dynamics of Rh. The analysis by one-way ANOVA showed that Rh had a significantly exponential relation （p〈0.05） to soil temperature at soil depth of 5 cm, and had a linear relation （p〈0.05） to soil water content of the upper 20 cm. The result estimated by the two-factor model shows that soil temperature at soil depth of 5 cm and soil moisture at soil depth of 20 cm could explain 68.9%-91.9% of seasonal variations in Rh. The or- der of Rh rates between different stand ages was middle-age plantation〉mature plantation〉young-age plantation. With the increase of growth age of plantation, the Q10 of Rh increased. The contribution of Rh to total soil surface CO2 flux was 71.89%, 71.02% and 73.53% for the young, middle-age and mature plantation, respectively. It was estimated that the annual CO2 fluxes from Rh were 29.07, 38.964 and 30.530 t.ha^-1.a^-1 for the young, middle-age and mature plantation, respectively.

Study on tracheid variation of Picea koraiensis (nakai) in natural stand and plantation

Tracheid characteristics ofPicea koraiensis from natural stand in Liangshui area and plantation in Mao'ershan area were studied. The results of variance analysis showed that the tracheid length, diameter, and thickness of tracheid wall were significant differences between the growth rings. All those characteristics tend to increase from heart-center to bark. In natural stand, it has positive correlation between the characteristics. In plantation, the tracheid length has positive correlation with the trachied diameter, while both the trachied length and the trachied diameter has negative correlation with the thickness of trachied wall. The tracheid length and diameter have no significant difference in growth between natural stand and plantations. The thickness of tracheid wall from the plantation is a little thicker than that from the natural stand before 15 years.