是精英,就该Stand Out

越来越多高中毕业生选择到美国读大学,其中不乏高考之后的学生。本期《留学》专访了美国大学网创始人李嘉玉先生,请他谈谈高考后如何准备留学美国和如何通过留学成为未来社会的精英。越来越多高中毕业生选择到美国读大学,其中不乏高考之后的学生。本期《留学》专访了美国大学网创始人李嘉玉先生,请他谈谈高考后如何准备留学美国和如何通过留学成为未来社会的精英。高考后留学,Nothing is Impossible!2014高考已圆满结束,很多有想法的学生和家长开始准备留学美国了。由于备考高考挤压了美国大学申请的准备时间,高考后学生必须更加努力,在半年内准备好托福、SAT考试以及相关文书和推荐信,申请2015年秋季美国大学入学。

Stand establishment,root development and yield of winter wheat as affected by tillage and straw mulch in the water deficit hilly region of southwestern China

Good crop stand establishment and root system development are essential for optimum grain yield of dryland wheat （Triti-cum aestivumL.）. At present, little is known about the effect of tilage and straw mulch on the root system of wheat under dryland areas in southwestern China. The aim of this study was to evaluate the effect of three tilage treatments （no-til, NT; rotary til, RT; conventional til, CT） and two crop residue management practices （straw mulch, ML; non-straw mulch, NML） on stand establishment, root growth and grain yield of wheat. NT resulted in lower soil cover thickness for the wheat seed, higher number of uncovered seeds, lower percentage of seedling-less ridges and lower tiler density compared to RT and CT; ML resulted in higher tiler density compared to NML. Straw mulching resulted in more soil water content and root length density （RLD） at most of the growth stages and soil depths. The maximum RLD, root surface area density and root dry matter density were obtained under NT. In the topmost 10 cm soil layer, higher RLD values were found under NT than those under RT and CT. There were no signiifcant differences in the yield or yield components of wheat among the tilage treatments in 2011–2012, but NT resulted in a signiifcant higher yield compared to RT and CT in 2012–2013. Grain yield was signiifcantly higher in ML compared to in NML. A strong relationship was observed between the water-use efifciency and the grain yield. Both NT and ML proved beneifcial for wheat in term of maintaining higher tiler density, better soil water status and root growth, leading to a higher grain yield and enhanced water-use efifciency, especialy in a low rainfal year.

Forest structure of a maple old-growth stand: a case study on the Apennines mountains(Southern Italy)

In Europe, very small forest areas can be considered to be old-growth, and they are mainly located in Eastern Europe. The typical structures of old growth forests infrequently occur in Mediterranean mountainous environments, since they have been affected by human activities for centuries. This study focused on a remote and almost pure Italian maple stand located in southern Italy, which has not been managed for long time due to its inaccessibility. The effects of natural evolution on the forest stand were evaluated through the analysis of the spatial and chronological structure and the regeneration patterns, then estimating the amounts and quality of deadwood occurrence. Across the whole stand, all the trees with DBH （diameter at breast height） larger than 50 cm （LLT, large living trees） were measured （DBH and height） and age was also determined through a dendrochronological approach. The diameters observed ranged between 50 and 145 cm with ages of 12o to ~5o years. The Latham index calculated for trees within the sample plot highlighted a multilayered canopy with a dominant layer of largeliving trees （age 〉 120 years）. The size-class distribution of stems had a reverse-J shape, and basal area was 52 m2 ha-1. Deadwood was exclusively constituted by standing dead trees and CWD and its volume was on average 31 m3 ha-1. Pure Italian maple forests are generally rare in Europe, and it was unexpected to find a forest stand characterized by a so complex structure with old growth attributes. The study of complex forest stand, even if small, could give precious information on the forest evolution, clarifying also diverse auto-ecological traits of tree species that usually are not common in our forests.

Stand development patterns of forest cover types in the natural forests of northern Baekdudaegan in South Korea

The purpose of this study was to classify current forest cover types,and to investigate stand development patterns for natural forests in six areas in northern Baekdudaegan,South Korea.Twenty-eight independent forest communities were aggregated into eight forest cover types by species composition in the overstory of each forest community.The forest cover types were of mixed mesophytic,‘‘others’ ’ deciduous,Quercus mongolica dominant,Q.mongolica pure,Pinus densiflora–Q.mongolica,P.densiflora,Betula ermanii,and Q.mongolica–P.koraiensis.The ecological information was organized by importance value and species diversity for each forest type.Based on the correlation between species diversity index and the abundance of Q.mongolica plus P.densiflora for corresponding forest cover types,we compared the developmental process and approximate successional pathway between each cover type.The P.densiflora forest cover type changes into the P.densiflora–Q.mongolica cover type,followed by the Q.mongolica dominant cover type through continuous invasion of the oak trees.Furthermore,the Q.mongolica pure cover type would spread toward the Q.mongolica dominant cover type with a mixture of various deciduous tree species.The Q.mongolica dominant cover type progresses through the other deciduous cover types to the mixed mesophytic cover type with diversified composition and structure.On the mid to lower slopes,with loamy soils and good moisture conditions,various deciduous forest types should progress,by ecological succession,toward the mixed mesophytic cover type without any further disturbance.

Pregnancy outcome of lactating dairy cows assigned for Presynch-Ovsynchsynchronization program and inseminated either at detected standing heat or at scheduled fixed time

Objective: To determine if insemination at standing heat results in a similar or higher pregnancy rate compared with fixed time artificial insemination, and to study some factors affecting the pregnancy rate. Methods: A total of 8944 inseminations were included in this study, from which 6823 inseminations were done in Holstein cows and 2121 inseminations were performed in Simmental cows. All cows were subjected to a Presynch-Ovsynch protocol. Cows detected in estrus (n=7424) were artificially inseminated, whereas cows not observed in estrus (n=1520) were submitted to fixed time artificial insemination. Results: The overall pregnancy rate of cows inseminated on the basis of the detected standing heat was comparable to that recorded for cows receiving fixed time artificial insemination. A higher pregnancy rate was recorded for cows during cold months than that recorded during hot months (P=0.000). A higher pregnancy rate was recorded for Simmental compared with that recorded for Holstein cows (P=0.001). Regarding parity, significant differences in the pregnancy rate were detected between primiparous and multiparous cows (P=0.040). In addition, artificial insemination technicians had no sigificant effect on pregnancy rate (P>0.05). Meanwhile, the used artificial insemination sires significantly (P=0.000) impacted the pregnancy rate. Conclusions: Insemination of cows detected in standing heat prior to predetermined fixed time results in similar pregnancy outcome and decreases days to the first service compared with insemination at the scheduled fixed time at the end of the Presynch-Ovsynch synchronization program. The overall pregnancy outcome is not affected by the breeding program, but it is highly impacted by cow's breed, parity, artificial insemination sire and breeding season.

Exploring tree diversity and stand structure of savanna woodlands in southeastern Sudan

Savanna woodlands in Sudan host great biodiversity, provide a plethora of ecosystem goods and services to local communities, and sustain numerous ecological functions. Although the importance of the Acacia trees in these areas is well known, up-to-date information about these woodlands' diversity is limited and changes in their woody vegetation composition, density, diversity and relative frequency are not monitored over time. This study explored tree diversity and stand stage structure in Nuara Reserved Forest, a typical savanna woodland ecosystem in southeastern Sudan. A total of 638 circular sample plots(1000 m^2 for each) were established using a systematic sampling grid method. The distance between plots was 200 m. In each plot, all living trees with diameter at breast height(DBH) ≥5.00 cm were identified and counted, and their DBH values were recorded. From these data, tree composition, diversity, density and stage structure were assessed. There were 12,259 individual trees representing four species(Acacia seyal, Balanites aegyptiaca, Acacia Senegal and Acacia mellifera) that belong to two families. The dominant species was Acacia seyal. Average tree density was 191 trees/hm^2 and the Shannon-Weiner index for trees diversity was 0.204. Overall, young trees comprised 86.30% of the forest. The state of tree richness and density in the study area was low compared to other similar environments in the region and around the world. We recommended adoption of a proper management system that includes monitoring of woody vegetation diversity in this forest, and management actions to enhance tree diversity and sustain ecosystem services to local communities. In addition to care for the dominant Acacia seyal stands, more attention and conservation should be devoted to reestablishing Acacia senegal and Acacia mellifera trees because of their high ecological and economic values for local communities.

<i>Quercus faginea</i>subsp. <i>tlemcenensis</i>Stands in the Moutas Reserve (Tlemcen, Northwest Algeria)

The Zeen oak (Quercus faginea) is a forest species endemic to the western Mediterranean, very remarkable in Algeria;it is an oak with deciduous or semi-persistent leaves. Quercus faginea, is very polymorphic, especially in terms of leaf characteristics, so it would be represented in Algeria by two subspecies: Quercus faginea subsp. baetica (Webb) DC and Quercus faginea subsp. tlemcenensis (DC). The latter, which is of major taxonomic interest, is a species that still resists climatic fluctuations. This stand is a formation at the climatic stage, which covers a large part of the Moutas reserve (488 ha), appears from an altitude of 1100 m and is frequently found where humidity is high. For a decade, our attention has been drawn to its particular behaviour, linked to major processes of change in both climate and biological components. Through this study, we show the importance of this stand, which is in a regressive dynamic phase on which the incidence of disturbances is only the action of anthropogenic climatic factors. Despite its good adaptive strategy, Quercus faginea subsp. tlemcenensis is a species threatened by multiple anthropozoogenic impacts;the latter constitutes a direct threat to the preservation and renewal of biological resources as well as to the ecological balance of the area [1], but the dynamic value of Quercus faginea subsp. tlemcenensis remains appreciated with particular attention by scientists, foresters, conservators and local populations in the region.

Climate Variation and Disturbance Regime Affect Stand Composition and Structure of the Boreal Forests in Southwest Yukon of Canada

The cold and dry boreal forests of the Southwest Yukon are dominated by white spruce (Picea glauca), trembling aspen (Populus tremuloides) and balsam poplar (Populus balsamifera), and the variability in structure and composition of stands depends on the favourability of disturbance, climate and site conditions for stimulating regeneration. In this study, we investigated relationships between stand structure and ecological, climatic and disturbance factors in the southwest Yukon. We found that white spruce dominates mature forests across the landscape, but it is regenerating proportionately less than trembling aspen. Nevertheless, regeneration of all the three species was abundant following any type or severity of disturbance. Height and diameter of both species varied with several environmental variables, particularly site physiography. Mixed stands of aspen and white spruce were more productive than pure stands of aspen or spruce. However, overall productivity in mixed stand decreased when density of aspen was more than 1000 stems/ ha. These results suggested that mixed stands of deciduous and coniferous species where appropriate should be promoted maintaining aspen density below 1000 stems/ha as the productivity declined beyond this threshold. Similarly, we suggest carrying out selection harvesting of co-dominant trees and regular thinning of intermediate trees to promote the height and diameter growth of the remaining trees.

Lu Wei Stands Out as a Rising Singer

Lu Wei’s profe is as follows:The following poem is composed

Soil properties and not plant factors affect both abundant and rare microbial taxa after thinning in a mixed stand of Cunninghamia lanceolata and Sassafras tzumu

Thinning is an effective management step for sustainable forest development,yet less attention is paid to the restoration of soil microbiota after thinning.In this study,both abundant and rare soil microbial communities(i.e.,bacterial,fungal),were evaluated under various thinning treatments in a mixed stand of Cunninghamia lanceolata and Sassafras tzumu using Mi Seq sequencing.Thinning did not significantly change either abundant or rare bacterial and fungal community composition,but affected their alpha diversity.The Shannon–Wiener indexes of rare fungal taxa under medium thinning were significantly lower than in the light thinning(P<0.05 level).Xanthobacteraceae dominated the abundant bacterial taxa,and Saitozyma and Mortierlla the abundant fungal taxa.The most common rare bacterial taxa varied;there was no prevalent rare fungal taxa under different thinnings.In addition,soil available nitrogen,total phosphorus,and p H had significant effects on rare bacterial taxa.Nutrients,especially available phosphorus,but not nitrogen,affected abundant and rare soil fungi.The results indicate that soil properties rather than plant factors affect abundant and rare microbial communities in soils of mixed stands.Thinning,through mediating soil properties,influences both abundant and rare bacterial and fungal communities in the mixed C.lanceolata and S.tzumu stand.

Impact of cattle density on the structure and natural regeneration of a turkey oak stand on an agrosilvopastoral farm in central Italy

On an agrosilvopastoral farm in central Italy where Maremmana cattle graze in Turkey oak forests,we evaluated the impact of different livestock densities on stand structure,tree diversity and natural regeneration in four types of grazed areas based on the grazing regime adopted:calf-grazed,high-intensity-grazed,low-intensity-grazed,ungrazed control.For each area,we set up three permanent circular plots(radius of 15 m)to survey the structural and dasometric characteristics of the overstorey,understorey,and regeneration layer.The results showed that grazing negatively affected the complexity of the forest structure and its potential to regenerate and maintain a high level of biodiversity.The differences in stand structure observed between the grazing areas were closely related to livestock density.The most sensitive components of the system were the understorey and the regeneration layers.Contrarily,the current grazing management did not affect the dominant tree structure or its composition.Our findings identified medium-term monitoring and regeneration management as the two significant aspects to consider when assessing sustainable livestock.New forests can be established by excluding graz-ing for about 20–25 years.

Study on Free-Standing Riser Under Different Working Conditions Based on 3D Co-Rotational Beam Element

When the free standing riser(FSR)is in service in the ocean,its mechanical properties are affected by various factors,including complex ocean current forces,buoyancy of the buoyancy can,and torque caused by the deflection of the upper floating body.These loads have a great influence on the deformation and internal force of the FSR.The static performance of FSR is investigated in this research under various working conditions.The finite element model of FSR is established based on the co-rotational method.The arc length approach is used to solve the model.The load is exerted in increments.The current load on the riser changes with the configuration of the riser.The accuracy of the numerical method is verified by Abaqus software.The calculation time is also compared.Then,the effects of uniform current,actual current and floating body yaw motion on FSR are studied by parameter analysis.Additionally,the influence of the FSR on the ocean current after the failure of part of the buoyancy can chamber is analyzed.The results show that the numerical model based on the co-rotational method can effectively simulate the large rotation and torsion behavior of FSR.This method has high computational efficiency and precision,and this method can quickly improve the efficiency of numerical calculation of static analysis of deep-water riser.The proposed technology may serve as an alternative to the existing proprietary commercial software,which uses a complex graphical user interface.

The effects of data aggregation on long-term projections of forest stands development

Forest management planning often relies on Airborne Laser Scanning(ALS)-based Forest Management Inventories(FMIs)for sustainable and efficient decision-making.Employing the area-based(ABA)approach,these inventories estimate forest characteristics for grid cell areas(pixels),which are then usually summarized at the stand level.Using the ALS-based high-resolution Norwegian Forest Resource Maps(16 m×16 m pixel resolution)alongside with stand-level growth and yield models,this study explores the impact of three levels of pixel aggregation(standlevel,stand-level with species strata,and pixel-level)on projected stand development.The results indicate significant differences in the projected outputs based on the aggregation level.Notably,the most substantial difference in estimated volume occurred between stand-level and pixel-level aggregation,ranging from-301 to+253 m^(3)·ha^(-1)for single stands.The differences were,on average,higher for broadleaves than for spruce and pine dominated stands,and for mixed stands and stands with higher variability than for pure and homogenous stands.In conclusion,this research underscores the critical role of input data resolution in forest planning and management,emphasizing the need for improved data collection practices to ensure sustainable forest management.

Assessing cutter-rock interaction during TBM tunnelling in granite:Large-scale standing rotary cutting tests and 3D DEM simulations

The widespread utilisation of tunnel boring machines(TBMs)in underground construction engineering requires a detailed investigation of the cutter-rock interaction.In this paper,we conduct a series of largescale standing rotary cutting tests on granite in conjunction with high-fidelity numerical simulations based on a particle-type discrete element method(DEM)to explore the effects of key cutting parameters on the TBM cutter performance and the distribution of cutter-rock contact stresses.The assessment results of cutter performance obtained from the cutting tests and numerical simulations reveal similar dependencies on the key cutting parameters.More specifically,the normal and rolling forces exhibit a positive correlation with penetration but are slightly influenced by the cutting radius.In contrast,the side force decreases as the cutting radius increases.Additionally,the side force shows a positive relationship with the penetration for smaller cutting radii but tends to become negative as the cutting radius increases.The cutter's relative effectiveness in rock breaking is significantly impacted by the penetration but shows little dependency on the cutting radius.Consequently,an optimal penetration is identified,leading to a low boreability index and specific energy.A combined Hertz-Weibull function is developed to fit the cutter-rock contact stress distribution obtained in DEM simulations,whereby an improved CSM(Colorado School of Mines)model is proposed by replacing the original monotonic cutting force distribution with this combined Hertz-Weibull model.The proposed model outperforms the original CSM model as demonstrated by a comparison of the estimated cutting forces with those from the tests/simulations.The findings from this work that advance our understanding of TBM cutter performance have important implications for improving the efficiency and reliability of TBM tunnelling in granite.

Keqiao Trade Fair Stands Out on Three Features——2009 CHINA KEQIAO INTERNATIONAL TEXTILE EXPO ceremoniously opens

On the morning of October 25th,2009,China Keqiao International Textile Expo (autumn) opened ceremoniously in China Textile City International Convention & Exhibition Center. "Large-Scale,internationalization

Runoff Characteristics of Different Stands in Dongjiang Lake Reservoir Area

Different forest stands in the Dongjiang Lake Reservoir area of Zixing were selected as the research objects to study the characteristics of runoff generation in different forest stands.The results showed that there was no significant difference in annual runoff among M3,M1,and M5,and no significant difference between each forest stand and the control.The order was M3(22.75 mm)>M1(21.77 mm)>M5(20.14 mm).Forest vegetation generates less runoff through vegetation restoration compared to the control,indicating that forest vegetation reconstruction and restoration are beneficial for soil and water conservation.

Simulation of Haloxylon Ammodendron Stand Basic Diameter Structure Based on Fuzzy Distribution Function

Based on the investigation data of 12 Haloxylon ammodendron plots in the south edge of Gurbantunggut Desert, Fuzzy distribution was introduced into the study of Haloxylon ammodendron base diameter structure fitting according to the consistency between the characteristics of Fuzzy distribution function and the distribution series of cumulative percentage of stand base diameter, and the fitting precision and effect of Fuzzy distribution function were discussed. The root mean square error RMSE and determination coefficient R2 values showed that Fuzzy-Γ1, Fuzzy-Γ2, Fuzzy-Γ3, Fuzzy-Γ4 had good fitting performance, among which Fuzzy-Γ1 had relatively high fitting precision, and its parameters were closely related to stand age and density, Fuzzy-Γ2 distribution function was the second, and Fuzzy-Γ4 distribution function had the worst fitting effect. By introducing a parameter c from the similarity of four distribution function formulas, a generalized Fuzzy distribution function Fuzzy-Γ5 is obtained. This function shows the highest fitting accuracy. Most of the values of parameter c are near 1 or 2, which shows that the diameter distribution is mainly approximate to Fuzzy-Γ1 and Fuzzy-Γ2.

Fabrication of Free Standing Nanocellulose Film via Spray Coating and its Biomedical Application: A Review

Spraying nanocellulose onto films provides a quick and scalable way to create free-standing films with exceptional consistency and customizable thickness. This method increases the application of nanocellulose films in various industries and satisfies the requirements of large-scale production. In the field of biomedicine, spray-coated free-standing nanocellulose films hold great promise for applications such as drug delivery, tissue engineering, wound healing, device coatings, and biosensing. They are excellent nanomaterials for a variety of biomedical applications due to their special qualities, including biocompatibility, high mechanical strength, porous structure, large surface area, and adaptability. This paper reviewed the detailed exposure of the spray coating process of nanocellulose suspension onto free- standing films and its biomedical applications.

Effects of Standing Time during Pretreatment on the Nitrite Concentration Detected by Spectrophotometric Method

Food safety problems caused by excessive nitrite addition have been frequently reported and the detection of nitrite in food is particularly important. The standing time during the pretreatment of primary sample has a great influence on the concentration of nitrite tested by spectrophotometric method. In this context, three kinds of food samples are prepared, including canned mustard, canned fish and home-made pickled water. A series of standing times are placed during the sample pretreatments and the corresponding nitrite contents in these samples are detected by spectrophotometric method based on N-ethylenediamine dihydrochloride. This study aims to find out a reasonable standing time during the pretreatment of food sample, providing influence factor for precise detection of nitrite.

Existence and Stability of Standing Waves for the Nonlinear Schrödinger Equation with Combined Nonlinearities and a Partial Harmonic Potential

In this paper, we study the existence of standing waves for the nonlinear Schrödinger equation with combined power-type nonlinearities and a partial harmonic potential. In the L2-supercritical case, we obtain the existence and stability of standing waves. Our results are complements to the results of Carles and Il’yasov’s artical, where orbital stability of standing waves have been studied for the 2D Schrödinger equation with combined nonlinearities and harmonic potential.