期刊文献+
共找到168,625篇文章
< 1 2 250 >
每页显示 20 50 100
北京黑猪AQP9和RPS10基因多态性及其与背膘厚的关联分析
1
作者 祝雪丽 张龙超 +2 位作者 王立贤 蒲蕾 刘欣 《畜牧兽医学报》 CAS CSCD 北大核心 2024年第1期87-98,共12页
旨在研究水通道蛋白9(aquaporins9,AQP9)及核糖体蛋白10(ribosomal protein S10,RPS10)基因多态性及其与北京黑猪背膘厚的相关性,以期能够获得北京黑猪背膘厚的有效标记。本研究以413头北京黑猪为研究对象,测定不同部位(肩部、6-7肋间... 旨在研究水通道蛋白9(aquaporins9,AQP9)及核糖体蛋白10(ribosomal protein S10,RPS10)基因多态性及其与北京黑猪背膘厚的相关性,以期能够获得北京黑猪背膘厚的有效标记。本研究以413头北京黑猪为研究对象,测定不同部位(肩部、6-7肋间、胸腰结合、腰荐结合)的背膘厚度。PCR扩增AQP9和RPS10基因的启动子区和外显子区序列筛选SNP位点,并将SNPs与各部位背膘厚进行关联分析。运用荧光定量PCR检测基因的差异表达。结果发现,AQP9基因启动子区有4个突变位点,其中1个SNP:rs332699245 A>C与胸腰结合处背膘厚关联显著(P<0.05),且该位点突变预测到了结合转录因子的改变;RPS10基因在3′UTR、CDS区共有8个突变位点,其中5个与背膘厚显著关联:rs80795904 C>G、rs80932213 T>C与6~7肋间背膘厚关联显著(P<0.05),rs3469834461 C>T与肩部背膘厚、四点平均背膘厚关联显著(P<0.05),rs80862457 C>T与胸腰结合处背膘厚、腰荐结合处背膘厚关联显著(P<0.05),rs336938272 A>C与6~7肋间背膘厚、腰荐结合处背膘厚、四点平均背膘厚均关联显著(P<0.05);且在3′UTR区检测到1个SNP(rs80862457 C>T),位于小RNA(microRNA,miRNA)结合靶点。基因表达差异分析表明,rs332699245 A>C中AA型个体的AQP9基因mRNA水平显著高于AC型个体(P<0.05),rs80862457 C>T中TT型个体的RPS10基因mRNA水平显著高于CC型个体(P<0.05)。综上所述,AQP9和RPS10基因与北京黑猪背膘厚显著关联,rs332699245 A>C和rs80862457 C>T位点可作为北京黑猪背膘厚选育的潜在分子标记,为北京黑猪的选育提供理论支撑。 展开更多
关键词 北京黑猪 AQP9 rps 10 背膘厚度 关联分析
下载PDF
3RPS并联机构的运动学误差建模及其分析 被引量:1
2
作者 王瑞 彭高磊 +1 位作者 郭祥雨 钟诗胜 《机械设计与制造》 北大核心 2024年第2期189-192,197,共5页
为了提高XYZ-3RPS六轴卧式混联机床的运动学精度,建立了3RPS并联机构的运动学参数误差模型。首先对3RPS并联机构的几何误差源进行了分析。然后基于闭环矢量微分法建立了3RPS并联机构包含铰点位置误差、转动副轴线方向误差、驱动支链零... 为了提高XYZ-3RPS六轴卧式混联机床的运动学精度,建立了3RPS并联机构的运动学参数误差模型。首先对3RPS并联机构的几何误差源进行了分析。然后基于闭环矢量微分法建立了3RPS并联机构包含铰点位置误差、转动副轴线方向误差、驱动支链零位杆长误差等27项结构参数误差对末端位姿误差的映射模型。最后设计了仿真实验,利用ADAMS的虚拟样机技术,获取机构实际末端位姿误差。通过与误差模型的结果对比,验证了所分析的27项结构参数误差设定值在(0.1~0.2)mm的范围内,误差模型的位置误差求解精度大于0.01mm,姿态误差求解精度大于0.01°。进一步的数值验证表明,误差模型的精度会随着结构参数误差值的减小而显著提高,为3RPS等少自由度并联机构的误差建模和运动学标定提供理论依据。 展开更多
关键词 运动学精度 3rps并联机构 误差建模 ADAMS仿真验证
下载PDF
The impact of the Rural Minimum Living Standard Guarantee(Rural Dibao)Program on child nutrition outcomes 被引量:1
3
作者 Dian Chen Xiangming Fang +3 位作者 Yu Chen Xiaodong Zheng Zhuo Chen Rodney B.W.Smith 《Journal of Integrative Agriculture》 SCIE CAS CSCD 2024年第2期444-456,共13页
The Rural Minimum Living Standard Guarantee(Rural Dibao)is an important unconditional cash transfer program to alleviate poverty in rural China.Despite the importance of children’s nutrition in breaking poverty cycle... The Rural Minimum Living Standard Guarantee(Rural Dibao)is an important unconditional cash transfer program to alleviate poverty in rural China.Despite the importance of children’s nutrition in breaking poverty cycles,little is known about the impact of Rural Dibao on child nutrition outcomes.Using China Family Panel Studies(CFPS),this paper examines the effects of Rural Dibao on child nutrition outcomes and investigates potential pathways and heterogeneous effects.We exploit propensity score matching and difference-in-differences techniques to evaluate the effects of the Rural Dibao program on child nutrition outcomes.Our results suggest that Rural Dibao significantly impacts the nutrition outcomes of children up to 15 years of age.Specifically,our results suggest that Rural Dibao improves child height-to-age z-scores by 1.05 standard deviations and lowers the probability of stunting by 11.9 percentage points.Additional analyses suggest that increased protein intake is the main pathway through which Rural Dibao participation contributes to better nutrition outcomes.We also find that the effect of the program is more pronounced among girls,children who are non-left-behind or live with highly educated mothers,and those from low-income families and poor areas.Our findings suggest that Rural Dibao participation helps improve child nutrition outcomes through improving diet quality. 展开更多
关键词 Rural Minimum Living standard Guarantee NUTRITION height-to-age z-scores STUNTING rural China
下载PDF
Development of a new cerebral ischemia reperfusion model of Mongolian gerbils and standardized evaluation system 被引量:1
4
作者 Ying Wu Caijiao Hu +9 位作者 Zhihui Li Feiyang Li Jianyi Lv Meng Guo Xin Liu Changlong Li Xueyun Huo Zhenwen Chen Lifeng Yang Xiaoyan Du 《Animal Models and Experimental Medicine》 CAS CSCD 2024年第1期48-55,共8页
Background:The Mongolian gerbil is an excellent laboratory animal for preparing the cerebral ischemia model due to its inherent deficiency in the circle of Willis.However,the low incidence and unpredictability of symp... Background:The Mongolian gerbil is an excellent laboratory animal for preparing the cerebral ischemia model due to its inherent deficiency in the circle of Willis.However,the low incidence and unpredictability of symptoms are caused by numerous complex variant types of the circle.Additionally,the lack of an evaluation system for the cer-ebral ischemia/reperfusion(I/R)model of gerbils has shackled the application of this model.Methods:We created a symptom-oriented principle and detailed neurobehavioral scoring criteria.At different time points of reperfusion,we analyzed the alteration in locomotion by rotarod test and grip force score,infarct volume by triphenyltetrazo-lium chloride(TTC)staining,neuron loss using Nissl staining,and histological charac-teristics using hematoxylin-eosin(H&E)straining.Results:With a successful model rate of 56%,32 of the 57 gerbils operated by our method harbored typical features of cerebral I/R injury,and the mortality rate in the male gerbils was significantly higher than that in the female gerbils.The suc-cessfully prepared I/R gerbils demonstrated a significant reduction in motility and grip strength at 1 day after reperfusion;formed obvious infarction;exhibited typi-cal pathological features,such as tissue edema,neuronal atrophy and death,and vacuolated structures;and were partially recovered with the extension of reperfu-sion time.Conclusion:This study developed a new method for the unilateral common carotid artery ligation I/R model of gerbil and established a standardized evaluation system for this model,which could provide a new cerebral I/R model of gerbils with more practical applications. 展开更多
关键词 ISCHEMIA/REPERFUSION Mongolian gerbil standardized model system unilateral carotid occlusion
下载PDF
RPS6亚基肽段抑制S180肿瘤细胞的分子机制
5
作者 蒲帝宏 叶姿妤 +4 位作者 周丽倩 刘欣岚 鲁艳 侯怡铃 丁祥 《生物学杂志》 CAS CSCD 北大核心 2024年第2期32-38,共7页
为探究核糖体蛋白RPS6亚基肽段对S180肿瘤细胞基因表达的影响及抑制肿瘤细胞的关键分子和信号通路,以S180荷瘤小鼠为模型,用RPS6亚基肽段处理S180荷瘤小鼠,对S180肿瘤细胞进行Illumina测序获得差异表达的基因,并对这些差异基因进行GO和K... 为探究核糖体蛋白RPS6亚基肽段对S180肿瘤细胞基因表达的影响及抑制肿瘤细胞的关键分子和信号通路,以S180荷瘤小鼠为模型,用RPS6亚基肽段处理S180荷瘤小鼠,对S180肿瘤细胞进行Illumina测序获得差异表达的基因,并对这些差异基因进行GO和KEGG分析。基因表达结果显示,RPS6亚基肽段会导致mt-Cytb、mt-Nd1、Rpl13基因表达降低,阻碍S180肿瘤细胞的氧化磷酸化过程。GO分析结果显示,RPS6亚基肽段抑制肿瘤细胞关键门类集中于质膜和质膜外侧组成成分的变化及免疫反应调节和免疫细胞的激活。差异基因结果显示,RPS6亚基肽段通过增强PRL/PRLR信号,上调Uchl1基因表达,诱导肿瘤细胞周期停滞。KEGG通路富集分析结果显示,穿孔素(PRF1)和颗粒酶B(GZMB)表达诱导细胞凋亡,同时自然杀伤细胞(natural killer cell,NK)介导的细胞毒性与NF-κB信号通路信号增强,IFN-γ和TNF-α表达上调共同参与RPS6亚基肽段作用下的S180肿瘤细胞凋亡,抑制S180肿瘤细胞增殖。RPS6亚基肽段导致S180肿瘤细胞细胞周期停滞,并诱导自然杀伤细胞介导的细胞毒性及NF-κB信号通路的上调导致S180肿瘤细胞凋亡,为RPS6亚基肽段在抗肿瘤研究的应用提供一定的理论依据。 展开更多
关键词 核糖体蛋白rps6 小分子多肽 RNA-Seq测序 差异表达基因 NF-κB信号通路
下载PDF
工程车辆3-RPS座椅悬架半主动滑模控制
6
作者 樊书伟 燕碧娟 +1 位作者 叶伟 张文军 《噪声与振动控制》 CSCD 北大核心 2024年第3期158-164,共7页
工程车辆处于恶劣的工作环境中,垂向单维度的被动减振无法满足实际需求。为解决该问题,依据可实现三维减振的3-RPS并联机构座椅悬架,提出一种新型三维控制策略。基于“座椅-人体”三维振动数学模型,设计一种新的三维天棚控制模型,作为... 工程车辆处于恶劣的工作环境中,垂向单维度的被动减振无法满足实际需求。为解决该问题,依据可实现三维减振的3-RPS并联机构座椅悬架,提出一种新型三维控制策略。基于“座椅-人体”三维振动数学模型,设计一种新的三维天棚控制模型,作为滑模控制的参考对象。设计滑模控制器,并根据Lyapunov稳定判据,对控制系统的稳定性进行分析判断。利用Simulink软件建立座椅-人体受振模型,对处于E、F、G级3种路面环境中,分别采用滑模控制以及被动控制模式的座椅的减振效果进行仿真对比分析。结果表明,相较于被动控制的座椅悬架,采用三维滑模控制的座椅悬架在垂直方向上的加速度下降率在38.88%至57.06%之间;俯仰方向上的角加速度的下降率在36.00%至54.89%之间;侧倾方向上的角加速度的下降率在49.58%至59.97%之间。且可有效降低垂直方向上的加速度峰值,对于冲击载荷减振性能良好。研究成果可为半主动多维减振座椅悬架控制策略的研究提供一定参考。 展开更多
关键词 振动与波 工程车辆 3-rps并联机构 三维天棚控制 滑模控制
下载PDF
Performance and Safety Improvement of Induction Motors based on Testing and Evaluation Standards
7
作者 Nkosinathi S.Khumalo Ntombizotwa P.Memane Udochukwu B.Akuru 《CES Transactions on Electrical Machines and Systems》 EI CSCD 2024年第3期310-318,共9页
The induction motor,which converts electrical energy into mechanical energy,has been recognized as the cornerstone of industrialization.The rotor of an induction motor can be either a squirrel cage rotor or a wound-ty... The induction motor,which converts electrical energy into mechanical energy,has been recognized as the cornerstone of industrialization.The rotor of an induction motor can be either a squirrel cage rotor or a wound-type rotor,both existing as magnetless topologies.Three-phase squirrel cage induction motors are frequently utilized in industrial drives because they are dependable,have high starting torque,are selfstarting and affordable.Single-phase induction motors,on the other hand,are commonly used for small loads such as domestic appliances in form of modest fans,pumps and electric power tools.In South Africa,there have been reports of fires and explosions resulting in live and property loss because of induction motors that have not been thoroughly tested or are incorrectly labelled in terms of ratings,electrical safety and performance.The goal of this study is targeted at preventing end-user injuries and failures caused by non-compliant induction motors,by evaluating locally manufactured/imported induction motors based on tests and evaluation from standards(IEC and SANS).The study is conducted using experimental procedures at the Explosion Prevention Technology and Rotating Machines(EPT and RM)laboratory,South African Bureau of Standards(SABS),South Africa.The main finding from the study shows differences in the nameplate characteristics of various induction motors which could have detrimental effects such as production and operational downtime in their end-use industries,at later stages. 展开更多
关键词 COMPLIANCE Induction motors International Electro-Technical standards(IEC) NAMEPLATE Experimental tests South African National standards(SANS)
下载PDF
Standardized ileal digestibility of amino acids in soybean meal fed to non-pregnant and pregnant sows
8
作者 Ke Wang Ya Wang +11 位作者 Lei Guo Yong Zhuo Lun Hua Lianqiang Che Shengyu Xu Ruinan Zhang Jian Li Bin Feng Zhengfeng Fang Xuemei Jiang Yan Lin De Wu 《Journal of Animal Science and Biotechnology》 SCIE CAS CSCD 2024年第1期362-373,共12页
Background Two studies were designed to determine standard ileal crude protein(CP)and amino acid(AA)digestibility of soybean meal(SBM)from different origins fed to non-pregnant and pregnant sows.Seven solvent-extracte... Background Two studies were designed to determine standard ileal crude protein(CP)and amino acid(AA)digestibility of soybean meal(SBM)from different origins fed to non-pregnant and pregnant sows.Seven solvent-extracted SBMs from soybeans produced in the USA,Brazil,and China were selected.In Exp.1,eight different diets were created:a nitrogen(N)-free diet and 7 experimental diets containing SBM from different origins as the only N source.Eight non-pregnant,multiparous sows were arranged in an 8×8 Latin square design(8 periods and 8 diets).In Exp.2,the diet formula was the same as in Exp.1.Eight gestating sows(parity 3)were assigned to 4 different diets in a replicated 4×3 Youden square design(three periods and four diets)in mid-gestation and again in late-gestation stages.Results When fed to non-pregnant and late-gestating sows,the standardized ileal digestibility(SID)of CP and most AAs from different SBM were not significantly different(P>0.05).When fed to mid-gestating sows,the SID values for Arg,His,Lys,Phe,Cys,Gly,Ser,and Tyr in SBM 1 were lower than in SBM 4 and 5(P<0.05),whereas SID for Leu from SBM 5 was higher than in SBM 1 and 4(P<0.05).SID values for Ile,Ala,and Asp from SBM 4 were lower than in SBM 1 and 5(P<0.05).Sows had significantly greater SID values for Lys,Ala,and Asp during mid-gestation when compared with late-gestation stages(P<0.05).Mid-gestating sows had greater SID value for Val and lower SID value for Tyr when compared with non-pregnant and late-gestating sows(P<0.01),whereas non-pregnant sows had significantly greater SID value for Met when compared with gestating sows(P<0.01).Conclusions When fed to mid-gestating sows,the SID values for most AAs varied among SBM samples.The SID values for Lys,Met,Val,Ala,Asp,and Tyr in SBM were affected by sow gestation stages.Our findings provide a cornerstone for accurate SBM use in sow diets. 展开更多
关键词 Amino acids SOWS Soybean meal standardized ileal digestibility
下载PDF
Research on batch multielement rapid quantitative analysis based on the standard curve-assisted calibration-free laserinduced breakdown spectroscopy method
9
作者 Weiwei HAN Duixiong SUN +7 位作者 Guoding ZHANG Honglin WANG Kai GUO Yuzhuo ZHANG Haoliang WANG Denghong ZHANG Chenzhong DONG Maogen SU 《Plasma Science and Technology》 SCIE EI CAS CSCD 2024年第9期156-164,共9页
This study proposes a batch rapid quantitative analysis method for multiple elements by combining the advantages of standard curve(SC)and calibration-free laser-induced breakdown spectroscopy(CF-LIBS)technology to ach... This study proposes a batch rapid quantitative analysis method for multiple elements by combining the advantages of standard curve(SC)and calibration-free laser-induced breakdown spectroscopy(CF-LIBS)technology to achieve synchronous,rapid,and accurate measurement of elements in a large number of samples,namely,SC-assisted CF-LIBS.Al alloy standard samples,divided into calibration and test samples,were applied to validate the proposed method.SC was built based on the characteristic line of Pb and Cr in the calibration sample,and the contents of Pb and Cr in the test sample were calculated with relative errors of 6%and 4%,respectively.SC built using Cr with multiple characteristic lines yielded better calculation results.The relative contents of ten elements in the test sample were calculated using CF-LIBS.Subsequently,the SC-assisted CF-LIBS was executed,with the majority of the calculation relative errors falling within the range of 2%-5%.Finally,the Al and Na contents of the Al alloy were predicted.The results demonstrate that it effectively enables the rapid and accurate quantitative analysis of multiple elements after a single-element SC analysis of the tested samples.Furthermore,this quantitative analysis method was successfully applied to soil and Astragalus samples,realizing an accurate calculation of the contents of multiple elements.Thus,it is important to advance the LIBS quantitative analysis and its related applications. 展开更多
关键词 laser-induced breakdown spectroscopy standard curve quantitative analysis multielement
下载PDF
Combination Activity of Standard Antituberculosis Drugs and Extracts of Medicinal Plants Commonly Used in Traditional Treatment of Tuberculosis in Uganda
10
作者 Moses Mpeirwe Kevin Komakech +2 位作者 Duncan Ssesazi Patrick Engeu Ogwang Joel Bazira 《Advances in Infectious Diseases》 CAS 2024年第3期511-522,共12页
Introduction: Resistance to antituberculosis drugs and adverse drug reactions remain the leading causes of tuberculosis therapeutic failure globally. Despite the increasing acceptance of medicinal plant use in combina... Introduction: Resistance to antituberculosis drugs and adverse drug reactions remain the leading causes of tuberculosis therapeutic failure globally. Despite the increasing acceptance of medicinal plant use in combination with conventional antituberculosis drugs in treatment of tuberculosis (TB) in Uganda, there is paucity of knowledge on their combination effect. Aim: This research aimed to determine combination activity of standard antituberculosis drugs with extracts of Zanthoxylum leprieurii Guill. & Perr. and Rubia cordifolia L., the two common antituberculosis medicinal plants in Uganda, against pansensitive (H37Rv) and multi-drug resistant (MDR) Mycobacterium tuberculosis strains. Materials and Methods: Two reference MTB strains (H37Rv and MDR strain) were inoculated on Middlebrook 7H11 medium containing a combination of standard antituberculosis drugs and methanol extracts of Z. leprieurii and R. cordifolia at varying concentrations. The number of colonies on the plates was observed and counted weekly for up to 8 weeks. In vitro combination activity was determined using proportion method. Mean percentage inhibition was calculated for the reduction of number of colonies on drug-extract combination medium in relation to drug-extract-free control medium. Results: Drug-extract combinations showed good combination activity against Mycobacterium tuberculosis strains when compared with individual standard anti-TB drugs. This was more exhibited against MDR strain. There was however a reduction in percentage inhibition when extracts were combined with ethambutol and streptomycin against H37Rv strain. Conclusions: Zanthoxylum leprieurii and Rubia cordifolia in combination with standard anti-TB drugs exhibited increased in vitro activity against Mycobacterium tuberculosis, especially MDR-TB strain. This justifies the local use of these plants in traditional treatment of tuberculosis especially in resistant cases in Uganda. 展开更多
关键词 Combination Activity Medicinal Plants Zanthoxylum leprieurii Rubia cordifolia standard Antituberculosis Drugs
下载PDF
Analysis of standardization development of TCM in Sichuan
11
作者 Li Gen 《China Standardization》 2024年第5期59-61,共3页
Sichuan province is home to rich traditional Chinese medicine(TCM)resources.Recent years have seen unremitting efforts of TCM standardization in the province.By analyzing the measures and existing problems,this paper ... Sichuan province is home to rich traditional Chinese medicine(TCM)resources.Recent years have seen unremitting efforts of TCM standardization in the province.By analyzing the measures and existing problems,this paper provides recommendations to boost TCM development through standardization. 展开更多
关键词 SICHUAN TCM standardIZATION
下载PDF
Standardization of meibomian gland dysfunction in an Egyptian population sample using a non-contact meibography technique
12
作者 Ahmed Mohamed Karara Zeinab El-Sanabary +2 位作者 Mostafa Ali El-Helw Tamer Ahmed Macky Mohamad Amr Salah Eddin Abdelhakim 《International Journal of Ophthalmology(English edition)》 SCIE CAS 2024年第1期61-65,共5页
AIM:To develop normative data for meibomian gland dysfunction(MGD)parameters,using non-contact meibography technique of Sirius Costruzione Strumenti Oftalmici(CSO)machine,in an Egyptian population sample.METHODS:Obser... AIM:To develop normative data for meibomian gland dysfunction(MGD)parameters,using non-contact meibography technique of Sirius Costruzione Strumenti Oftalmici(CSO)machine,in an Egyptian population sample.METHODS:Observational,cross-sectional,analytic study,in which 104 Egyptian volunteers were included.Both upper lids were examined,using“Sirius CSO”machine.Each eyelid was given a degree of meibomian gland loss(MGL),which was calculated by the software of the machine.RESULTS:Mean percentage MGL in right upper lid was of 30.9%±12.6%,and that of left upper lid was 32.6%±11.8%.Thirty-four volunteers(32.7%)had first-degree MGL in their right upper lid,and 67.3%had second-degree loss.One volunteer(1%)had zero-degree MGL in left upper lid,28(26.9%)had first-degree loss,and 75(72.1%)had second-degree loss.Degree of MGL in right upper eyelid was not related to age,but degree of MGL in left upper eyelid increased with age.There was statistically significant difference between both genders for degree of MGL in right eye(P=0.036)and in left eye(P=0.027).CONCLUSION:Noncontact meibography is a useful non-invasive tool for diagnosing MGL.MGL is diagnosed in 100%of apparently normal individuals;26.9%-32.7%of which have first-degree MGL,and 67.3%-72.1%have second-degree MGL. 展开更多
关键词 Egyptian population meibomian gland dysfunction non-contact meibography standardIZATION upper lid
下载PDF
PDE Standardization Analysis and Solution of TypicalMechanics Problems
13
作者 Ningjie Wang Yihao Wang +1 位作者 Yongle Pei Luxian Li 《Computer Modeling in Engineering & Sciences》 SCIE EI 2024年第10期171-186,共16页
A numerical approach is an effective means of solving boundary value problems(BVPs).This study focuses on physical problems with general partial differential equations(PDEs).It investigates the solution approach throu... A numerical approach is an effective means of solving boundary value problems(BVPs).This study focuses on physical problems with general partial differential equations(PDEs).It investigates the solution approach through the standard forms of the PDE module in COMSOL.Two typical mechanics problems are exemplified:The deflection of a thin plate,which can be addressed with the dedicated finite element module,and the stress of a pure bending beamthat cannot be tackled.The procedure for the two problems regarding the three standard forms required by the PDE module is detailed.The results were in good agreement with the literature,indicating that the PDE module provides a promising means to solve complex PDEs,especially for those a dedicated finite element module has yet to be developed. 展开更多
关键词 Three standard forms expression input PDE module deflection solution stress solution
下载PDF
Dialogue on standards:directions and difficulties of standardization discipline construction
14
《China Standardization》 2024年第5期28-49,共22页
To probe into the directions and difficulties of standardization discipline construction in China,China Standardization Press organized a pertinent dialogue on July 10.During the event,Yu Xinli,President of China Asso... To probe into the directions and difficulties of standardization discipline construction in China,China Standardization Press organized a pertinent dialogue on July 10.During the event,Yu Xinli,President of China Association for Standardization,was invited as the moderator.Several standardization experts including Song Mingshun,Mai Lyubo,Qiang Yi,Cao Lili,and Huang Manxue from the China Standardization Expert Committee and renowned universities and research institutes in the country were invited as guests to give their insightful views. 展开更多
关键词 DIRECTIONS DISCIPLINE standardization
下载PDF
Post competency training in standardized training of resident physicians and integrated postgraduates
15
作者 Yan Zeng Jian Yang Jun-Wen Zhang 《World Journal of Clinical Cases》 SCIE 2024年第29期6250-6254,共5页
We focus on the importance and necessity of post-competency-based training in medical education alongside its current challenges and opportunities.Integrating post competency training into standardized educational fra... We focus on the importance and necessity of post-competency-based training in medical education alongside its current challenges and opportunities.Integrating post competency training into standardized educational frameworks is increasingly recognized as a critical component of preparing residents and postgraduates for real-world clinical practice.Post competency training represents a commitment to excellence in medical education,striving to produce competent,skilled practitioners to meet the challenges of modern healthcare. 展开更多
关键词 Post competency standardized training RESIDENT POSTGRADUATE Competencybased medical education
下载PDF
Analysis of standardization of community security fund management-Taking practice of community security fund management in Wuhou district of Chengdu as an example
16
作者 Li Xiaowen Wen Jiahua +1 位作者 Wen Mengchuan Ren Yan 《China Standardization》 2024年第5期56-58,共3页
The Chengdu community security funds refer to the special security funds for urban and rural community development and governance in Chengdu.At present,there are some problems in the use of community security funds,su... The Chengdu community security funds refer to the special security funds for urban and rural community development and governance in Chengdu.At present,there are some problems in the use of community security funds,such as low participation of residents,and low efficiency of fund use.Taking the exploration of standardization of community security fund management in Wuhou district,Chengdu city,as an example,this paper suggests further strengthening the use and management of community security funds by means of standardization,ensuring the democratic,open,and transparent use of funds,and effectively enhancing the supporting role of community security funds in community governance. 展开更多
关键词 community security funds management standardIZATION
下载PDF
Workshop on driving inclusiveness in standardization
17
《China Standardization》 2024年第3期61-61,共1页
With the support of the Belgian FPS Economy,SBS and CEN-CENELEC are co-organizing the workshop,under the High-Level Forum on European standardization(HLF)and its workstream on inclusiveness in national standardization... With the support of the Belgian FPS Economy,SBS and CEN-CENELEC are co-organizing the workshop,under the High-Level Forum on European standardization(HLF)and its workstream on inclusiveness in national standardization,to tackle issues of access and participation in standardization at the national level and discuss and promote best practices. 展开更多
关键词 driving standardIZATION INCLUSIVE
下载PDF
Parallel session on marine standardization
18
作者 曹欣欣(编译) 《China Standardization》 2024年第4期50-51,共2页
The session on marine standardization was successfully held on May 22.Yu Xinli,President of China Association for Standardization(CAS),was invited to deliver a keynote speech.The highlight of her speech is presented a... The session on marine standardization was successfully held on May 22.Yu Xinli,President of China Association for Standardization(CAS),was invited to deliver a keynote speech.The highlight of her speech is presented as follows。 展开更多
关键词 standardIZATION SESSION MARINE
下载PDF
China and Sri Lanka sign a MoU on standardization
19
《China Standardization》 2024年第3期12-12,共1页
Witnessed by Chinese Premier Li Qiang and Sri Lanka Prime Minister Dinesh Gunawardena,Luo Wen,Minister of SAMR,and Anura Dissanayake,Secretary to the Prime Minster of Sri Lanka,signed a MoU on the standardization area... Witnessed by Chinese Premier Li Qiang and Sri Lanka Prime Minister Dinesh Gunawardena,Luo Wen,Minister of SAMR,and Anura Dissanayake,Secretary to the Prime Minster of Sri Lanka,signed a MoU on the standardization area on March 26. 展开更多
关键词 MINISTER standardIZATION SECRETARY
下载PDF
Review on the Development of Cosmetic Industry from the Perspective of Group Standards
20
作者 Xue Wei You Weishan +1 位作者 Wu Jianghong Su Lihong 《China Detergent & Cosmetics》 CAS 2024年第1期10-19,共10页
From the perspective of group standards, the dynamics of the cosmetic industry in the past few years were briefly reviewed and analyzed, including the number of group standards published, types of group standards, gro... From the perspective of group standards, the dynamics of the cosmetic industry in the past few years were briefly reviewed and analyzed, including the number of group standards published, types of group standards, groups, and geographical distribution of the groups. The large number of participating groups and the wide range of geographical distribution indicated that group standards could play a positive role in the sustained and positive development of cosmetic industry. The future development of cosmetic industry was also prospected。 展开更多
关键词 group standard COSMETIC INDUSTRY
下载PDF
上一页 1 2 250 下一页 到第
使用帮助 返回顶部