The Mandatory Energy Efficiency Standard for Distribution Transformer soon Publicized in China

Owning to the rapid economy development in China and sharp increase of energyconsumption in recent years, energy shortage is increasingly apparent and becoming an importantobstacle to the sustainable development of our economy. With the aim to relieve the problem ofenergy shortage, the State Development and Reform Commission places the great emphasis ofenergy-saving work on improving energy efficiency of industrial energy-consuming products inenergy-saving work. The General Administration of Quality Supervision, Inspection and Quarantine ofthe People's Republic of China (AQSIQ) has issued and implemented two energy efficiency standardsfor three-phase induction motors and displacement air compressor, and will soon issue another twoenergy efficiency standards for clean- water centrifugal pumps and ventilation fans. The transformeris a kind of electric equipment widely used in many industries in national economy, with featuresof great amount of use, long period of operation and tremendous potential of energy-saving. So, itis necessary to develop the standard of energy efficiency for distribution transformers.

The Publication and Distribution of Chinses Standards and Other Standards-related Products

Standards Press of China (SPC), founded in October 1963, is the onlypublication center in China licensed to publish national standards, trade standards, and booksconcerned with standardization, quality, and other science and technology. The main publications areas following: 1. National standards; 2. Trade standards; 3. Standards compilation booksand guides; 4. Books concerned with standardization; 5. Books of quality management andquality certification; 6. Books of environmental management and environmental certification.

Statistical Characteristics of Raindrop Size Distribution in the Tibetan Plateau and Southern China

The characteristics of raindrop size distribution （DSD） over the Tibetan Plateau and southern China are studied in this paper, using the DSD data from April to August 2014 collected by HSC-PS32 disdrometers in Nagqu and Yangjiang, com- prising a total of 9430 and 63661-rain raindrop spectra, respectively. The raindrop spectra, characteristics of parameter variations with rainfall rate, and the relationships between reflectivity factor （Z） and rainfall rate （R） are analyzed, as well as their DSD changes with precipitation type and rainfall rate. The results show that the average raindrop spectra appear to be one-peak curves, the number concentration for larger drops increase significantly with rainfall rate, and its value over southern China is much higher, especially in convective rain larger drops, especially for convective rain in southern China. Standardized Gamma distributions better describe DSD for All three Gamma parameters for stratiform precipitation over the Tibetan Plateau are much higher, while its shape parameter （,u） and mass-weighted mean diameter （Dm）, for convective precipitation, are less. In terms of parameter variation with rainfall rate, the normalized intercept parameter （Nw） over the Tibetan Plateau for stratiform rain increases with rainfall rate, which is opposite to the situation in convective rain. The/1 over the Tibetan Plateau for stratiform and convective precipitation types decreases with an increase in rainfall rate, which is opposite to the case for Dm variation. In Z-R relationships, like ＂Z = ARb＇＇, the coefficient A over the Tibetan Plateau is smaller, while its b is higher, when the rain type transfers from stratiform to convective ones. Furthermore, with an increase in rainfall rate, parameters A and b over southern China increase gradually, while A over the Tibetan Plateau decreases sub- stantially, which differs from the findings of previous studies. In terms of geographic location and climate over the Tibetan Plateau and southern China, the precipitation in the pre-flood seasons is dominated by strong convective rain, while weak convective rain occurs frequently in northern Tibet with lower humidity and higher altitude.

Visualization analysis of the international standard ISO/TC 249 for traditional Chinese medicine

Objective This study proposes to visually review the current situation and progress of standards sets by the International Organization for Standardization/Technical Committee on Traditional Chinese Medicine(ISO/TC 249). The review aims to explore the development strategies of the standards, which will exhibit the considerable impact on the economy, trade and exchanges, and cooperation in the area of traditional Chinese medicine(TCM).Methods ISO/TC 249 standards were searched on the ISO website, and their title, proposed time, current stage, scope, and classification were obtained for further summarization. Gephi was utilized to portray the co-occurrence network graph of the ISO/TC 249 standards subject.Results In ISO/TC 249, there were 116 standards, including 81 published standards and 35 developing standards by April 30, 2022. Two withdrawal standards were published after revision, which were not counted in the total standards. The number of published standards has been increasing since the first standard was published in 2014, whose title was “Sterile acupuncture needles for single use”. Among these standards, 17.24%(20/116) standards were in review, 56.03%(65/116) in publication, 3.45%(4/116) in approval, 5.17%(6/116) in enquiry,3.45%(4/116) in committee, and 14.66%(17/116) in preparation, respectively. With 116 standards, most of the research focused on the medicament, as its classification of the International Classification for Standards(ICS) showed the proportion reaching 49.54%. The network analysis data revealed that the top five most frequent words were “materials” “root” “requirements” “products” and “system”, after removing the noise data, such as prepositions,conjunctions, and pronouns. Additionally, the word “system” co-exists with the terms “computerized” “coding” “image” “tongue” and “analysis”;the word “requirement” co-exists with“manufacturing” “decoction” “process” and “materials”;whereas the word “devices” coexists with “pulse” “electric” “skin” and “measurement”.Conclusion With the increased diversification and complexity of problems, the development of standards is also oriented to multidisciplinary fields to cultivate the interdisciplinary talents, and especially the international standardization talents of compound TCM. Multi-angle analysis, formulation, and demonstration of standards, in line with industry needs in different disciplines, enhance the availability of standards and the ability to serve the industry.

Abnormal Behavior Detection and Recognition Method Based on Improved ResNet Model

The core technology in an intelligent video surveillance system is that detecting and recognizing abnormal behaviors timely and accurately.The key breakthrough point in recognizing abnormal behaviors is how to obtain the effective features of the picture,so as to solve the problem of recognizing them.In response to this difficulty,this paper introduces an adjustable jump link coefficients model based on the residual network.The effective coefficients for each layer of the network can be set after using this model to further improving the recognition accuracy of abnormal behavior.A convolution kernel of 1×1 size is added to reduce the number of parameters for the purpose of improving the speed of the model in this paper.In order to reduce the noise of the data edge,and at the same time,improve the accuracy of the data and speed up the training,a BN(Batch Normalization)layer is added before the activation function in this network.This paper trains this network model on the public ImageNet dataset,and then uses the transfer learning method to recognize these abnormal behaviors of human in the UTI behavior dataset processed by the YOLO_v3 target detection network.Under the same experimental conditions,compared with the original ResNet-50 model,the improved model in this paper has a 2.8%higher accuracy in recognition of abnormal behaviors on the public UTI dataset.

Using leaf area index(LAI) to assess vegetation response to drought in Yunnan province of China

Climatic extremes such as drought have becoming a severe climate-related problem in many regions all over the world that can induce anomalies in vegetation condition. Growth and CO2 uptake by plants are constrained to a large extent by drought.Therefore, it is important to understand the spatial and temporal responses of vegetation to drought across the various land cover types and different regions. Leaf area index(LAI) derived from Global Land Surface Satellite(GLASS) data was used to evaluate the response of vegetation to drought occurrence across Yunnan Province, China(2001-2010). The meteorological drought was assessed based on Standardized Precipitation Index(SPI)values. Pearson's correlation coefficients between LAI and SPI were examined across several timescales within six sub-regions of the Yunnan. Further, the drought-prone area was identified based on LAI anomaly values. Lag and cumulative effects of lack of precipitation on vegetation were evident, with significant correlations found using 3-, 6-, 9-and 12-month timescale. We found 9-month timescale has higher correlations compared to another timescale.Approximately 29.4% of Yunnan's area was classified as drought-prone area, based on the LAI anomaly values. Most of this drought-prone area was distributed in the mountainous region of Yunnan.From the research, it is evident that GLASS LAI can be effectively used as an indicator for assessing drought conditions and it provide valuable information for drought risk defense and preparedness.

Rubidium-beam microwave clock pumped by distributed feedback diode lasers

A rubidium-beam microwave clock, optically pumped by a distributed feedback diode laser, is experimentally investigated. The clock is composed of a physical package, optical systems, and electric servo loops. The physical package realizes the microwave interrogation of a rubidium-atomic beam. The optical systems, equipped with two 780-nm distributed feedback laser diodes, yield light for pumping and detecting. The servo loops control the frequency of a local oscillator with respect to the microwave spectrum. With the experimental systems, the microwave spectrum, which has an amplitude of 4 n A and a line width of 700 Hz, is obtained. Preliminary tests show that the clock short-term frequency stability is 7 × 10^-11 at 1 s, and 3 × 10^-12 at 1000 s. These experimental results demonstrate the feasibility of the scheme for a manufactured clock.