Standardizing the International Bidding System for Chinese Machinery and Electric Products

Inthemid-1980s,ChinaintroducedtheinternationalhiddinqgvstAnimportingitsmachineryandelectricalproducts.TOday,ithasatotalof39institutionsresponsiblefortheirtenderingbusiness.Callingfortenderscanbeenmistedtoanysuchinstitutionbyanenterprise.Thesourcesoff...

China Announces its First Trial Project on Standardizing the Recycling Economy

According to an announcement made by the Standardization Administration of the PRC (SAC)on March 21, 2007, the organization has given approval to Blue Sky Ecological Agriculture Development Co., Ltd., for a trial run at standardizing the recycling economy, the first such trial project in China.……

The Work of JTCA in Standardizing and Improving the Quality of Operating Information in Japan

Main Activities of JTCA JTCA activities cover the following five areas: ……

Standardizing CPUE of Ommastrephes bartramii for Chinese squid-jigging fishery in Northwest Pacific Ocean

Generalized linear models （GLM） and generalized additive models （GAM） were used to standardize catch per unit fishing effort （CPUE） of Ommastrephes bartramii for Chinese squid-jigging fishery in Northwest Pacific Ocean. Three groups of variables were considered in the standardization： spatial variables （longitude and latitude）, temporal variables （year and month） and environmental variables, including sea surface temperature （SST）, sea surface salinity （SSS） and sea level height （SLH）. CPUE was treated as the dependent variable and its error distribution was assumed to be log-normal in each model. The model selections of GLM and GAM were based on the finite sample-corrected Akaike information criterion （AICC） and pseudo-coefficient （Pcf） combined P-value, respectively. Both GAM and GLM analysis showed that the month was the most important variable affecting CPUE and could explain 21.3% of variability in CPUE while other variables only explained 8.66%. The interaction of spatial and temporal variables weakly influenced the CPUE. Moreover, spatio-temporal factors may be more important in influencing the CPUE of this squid than environmental variables. The standardized and nominal CPUEs were similar and had the same trends in spatio-temporal distribution, but the standardized CPUE values tended to be smaller than the nominal CPUE. The CPUE tended to have much higher monthly variation than annual variations and their values increased with month. The CPUE became higher with increasing latitude-high CPUE usually occurred in 145°E-148°E and 149°E-162°E. The CPUE was higher when SST was 14-21℃ and the SLH from -22 cm to -18 cm. In this study, GAM tended to be more suitable than GLM in analysis of CPUE.

Importance of Standardizing Analytical Characterization Methodology for Improved Reliability of the Nanomedicine Literature

Understanding the interaction between biological structures and nanoscale technologies,dubbed the nano-bio interface,is required for successful development of safe and efficient nanomedicine products.The lack of a universal reporting system and decentralized methodologies for nanomaterial characterization have resulted in a low degree of reliability and reproducibility in the nanomedicine literature.As such,there is a strong need to establish a characterization system to support the reproducibility of nanoscience data particularly for studies seeking clinical translation.Here,we discuss the existing key standards for addressing robust characterization of nanomaterials based on their intended use in medical devices or as pharmaceuticals.We also discuss the challenges surrounding implementation of such standard protocols and their implication for translation of nanotechnology into clinical practice.We,however,emphasize that practical implementation of standard protocols in experimental laboratories requires long-term planning through integration of stakeholders including institutions and funding agencies.

Standardizing Foodstuff Processing & Its Improvement in Guangzhou

Based on a survey carried out on all fully certificated foodstuff manufacturers in Guangzhou, an analysis of the status quo of Foodstuff Processing Standardization in Guangzhou is made to identify the major problems and measures to be adopted for improvement.

Upgrading, Transforming, and Standardizing of Offshore Oil Drilling Equipment in China

This paper discusses the development of China's oil exploration & drilling equipment, and it focuses mainly on the domestication, industrialization, and standardization of fixed offshore drilling rigs primarily constructed by CNOOC. Considering the manufacturing of and application of deepwater drilling equipment in China, the authors put forward suggestions regarding industry policies and the standardization of China's offshore engineering equipment.

基于湍流模型的飞行器温度场数值仿真研究

飞行器红外成像仿真需要不同飞行条件下的温度场分布。本文利用标准(Standard)k-ε模型、剪切应力传输(SST)k-ε模型和Spalart-Allmaras(S-A)模型分别进行数值模拟仿真计算,研究不同飞行速度和飞行高度下的飞行器温度场分布,并对不同模型的结果进行对比分析。首先,利用MultiGen Creator软件对飞行器进行三维建模;其次采用Hypemesh软件和Fluent meshing软件中进行面网格划分和体网格划分,最后采用Fluent 2022R1软件仿真飞行器静态温度场分布,通过改变湍流模型与边界条件设置,对不同飞行速度和不同高度下飞行器温度场进行数值模拟仿真,并与理论结果进行了对比分析。实验结果显示,3种湍流模型均能较好的模拟飞行器蒙皮与尾喷管内壁壁面温度值。飞行器蒙皮温度随着飞行马赫数的增加不断升高;随着飞行高度的升高而不断地降低,与理论结果变化规律一致。在尾喷管内壁面温度仿真中,3种湍流模型仿真的内壁面温度最高相差21 K,相对误差在1.8%左右,在红外仿真中近似忽略不计,故3种湍流模型均适合尾喷管内壁面温度场仿真。在蒙皮温度场仿真中,3种湍流模型仿真计算的蒙皮平均温度值与理论温度值的相对误差均在5%以内,均可满足红外成像仿真的温度差值要求,其中k-ε模型在蒙皮温度场模拟中与理论温度值最为接近,因此k-ε模型精度更高,更适合于飞行器的流场仿真,能更好地仿真出空气动力加热对飞行器温度场的影响。

The impact of the Rural Minimum Living Standard Guarantee(Rural Dibao)Program on child nutrition outcomes

The Rural Minimum Living Standard Guarantee(Rural Dibao)is an important unconditional cash transfer program to alleviate poverty in rural China.Despite the importance of children’s nutrition in breaking poverty cycles,little is known about the impact of Rural Dibao on child nutrition outcomes.Using China Family Panel Studies(CFPS),this paper examines the effects of Rural Dibao on child nutrition outcomes and investigates potential pathways and heterogeneous effects.We exploit propensity score matching and difference-in-differences techniques to evaluate the effects of the Rural Dibao program on child nutrition outcomes.Our results suggest that Rural Dibao significantly impacts the nutrition outcomes of children up to 15 years of age.Specifically,our results suggest that Rural Dibao improves child height-to-age z-scores by 1.05 standard deviations and lowers the probability of stunting by 11.9 percentage points.Additional analyses suggest that increased protein intake is the main pathway through which Rural Dibao participation contributes to better nutrition outcomes.We also find that the effect of the program is more pronounced among girls,children who are non-left-behind or live with highly educated mothers,and those from low-income families and poor areas.Our findings suggest that Rural Dibao participation helps improve child nutrition outcomes through improving diet quality.

Development of a new cerebral ischemia reperfusion model of Mongolian gerbils and standardized evaluation system

Background:The Mongolian gerbil is an excellent laboratory animal for preparing the cerebral ischemia model due to its inherent deficiency in the circle of Willis.However,the low incidence and unpredictability of symptoms are caused by numerous complex variant types of the circle.Additionally,the lack of an evaluation system for the cer-ebral ischemia/reperfusion(I/R)model of gerbils has shackled the application of this model.Methods:We created a symptom-oriented principle and detailed neurobehavioral scoring criteria.At different time points of reperfusion,we analyzed the alteration in locomotion by rotarod test and grip force score,infarct volume by triphenyltetrazo-lium chloride(TTC)staining,neuron loss using Nissl staining,and histological charac-teristics using hematoxylin-eosin(H&E)straining.Results:With a successful model rate of 56%,32 of the 57 gerbils operated by our method harbored typical features of cerebral I/R injury,and the mortality rate in the male gerbils was significantly higher than that in the female gerbils.The suc-cessfully prepared I/R gerbils demonstrated a significant reduction in motility and grip strength at 1 day after reperfusion;formed obvious infarction;exhibited typi-cal pathological features,such as tissue edema,neuronal atrophy and death,and vacuolated structures;and were partially recovered with the extension of reperfu-sion time.Conclusion:This study developed a new method for the unilateral common carotid artery ligation I/R model of gerbil and established a standardized evaluation system for this model,which could provide a new cerebral I/R model of gerbils with more practical applications.

2021-2022年蒙古标准化发展分析:基于获批标准涉及领域的统计

Mongolia,a key partner in the Belt and Road Initiative,is fully dedicated to fostering regional cooperation and connectivity.Standardization has emerged as a vital field with far-reaching influence for regional trade cooperation.This paper makes an in-depth analysis of the standards approved in Mongolia in 2021 and 2022,offering a fresh perspective of the past two years’standardization development in the country.The primary objective is to present an updated account of Mongolia’s standardization efforts and to facilitate regional cooperation and exchange in standardization.

智慧城轨车地一体化机电系统标准体系构建研究

With the rapid development and application of emerging information technologies such as cloud computing,big data,artificial intelligence,5G,satellite communication,and blockchain in urban rail transit,China’s urban rail transit has entered an era of intelligent transformation and upgrading.The development of intelligent systems and the construction of smart urban rail transit have formed a consensus in the industry.The electromechanical system is an important component of urban rail transit engineering,covering power supply stations,vehicles,stations,and lines.The depot and control center are important support for promoting the development of urban rail transit towards informatization and intelligence.However,research on the technical standards for the smart urban rail vehicle-ground integrated electromechanical system has just begun,and a technical standards system has not yet been formed,which cannot better support the electromechanical system.Therefore,it is necessary to conduct research on the technical standards system,propose the common criteria structure and standards list of the standards system,which can provide reference and guidance for the planning and establishment of China’s smart urban rail standards system.

Spatiotemporal characteristics of cultivated land use eco-efficiency and its influencing factors in China from 2000 to 2020

Improving cultivated land use eco-efficiency(CLUE)can effectively promote agricultural sustainability,particularly in developing countries where CLUE is generally low.This study used provincial-level data from China to evaluate the spatiotemporal evolution of CLUE from 2000 to 2020 and identified the influencing factors of CLUE by using a panel Tobit model.In addition,given the undesirable outputs of agricultural production,we incorporated carbon emissions and nonpoint source pollution into the global benchmark-undesirable output-super efficiency-slacks-based measure(GB-US-SBM)model,which combines global benchmark technology,undesirable output,super efficiency,and slacks-based measure.The results indicated that there was an upward trend in CLUE in China from 2000 to 2020,with an increase rate of 2.62%.The temporal evolution of CLUE in China could be classified into three distinct stages:a period of fluctuating decrease(2000-2007),a phase of gradual increase(2008-2014),and a period of rapid growth(2015-2020).The major grain-producing areas(MPAs)had a lower CLUE than their counterparts,namely,non-major grain-production areas(non-MPAs).The spatial agglomeration effect followed a northeast-southwest strip distribution;and the movement path of barycentre revealed a"P"shape,with Luoyang City,Henan Province,as the centre.In terms of influencing factors of CLUE,investment in science and technology played the most vital role in improving CLUE,while irrigation index had the most negative effect.It should be noted that these two influencing factors had different impacts on MPAs and non-MPAs.Therefore,relevant departments should formulate policies to enhance the level of science and technology,improve irrigation condition,and promote sustainable utilization of cultivated land.

三段式嵌套顺序统计量的分布及应用

顺序统计量在非参数统计分析中有着广泛的应用,嵌套顺序统计量的分布则依赖于具体的嵌套结构以及随机变量的分布特性.在研究三段式嵌套顺序统计量的分布时,可以将问题转化为嵌套积分,通过对相应的嵌套单形进行多重积分得到三段式嵌套顺序统计量的分布.这种分析方法的应用十分广泛,由于Standard Young Tableaux (SYT)的每一行对应一组独立的顺序统计量,因此文章将其应用于SYT的计数问题.此外,文章还将三段式嵌套顺序统计量的分布应用于选票问题.

Standardized ileal digestibility of amino acids in soybean meal fed to non-pregnant and pregnant sows

Background Two studies were designed to determine standard ileal crude protein(CP)and amino acid(AA)digestibility of soybean meal(SBM)from different origins fed to non-pregnant and pregnant sows.Seven solvent-extracted SBMs from soybeans produced in the USA,Brazil,and China were selected.In Exp.1,eight different diets were created:a nitrogen(N)-free diet and 7 experimental diets containing SBM from different origins as the only N source.Eight non-pregnant,multiparous sows were arranged in an 8×8 Latin square design(8 periods and 8 diets).In Exp.2,the diet formula was the same as in Exp.1.Eight gestating sows(parity 3)were assigned to 4 different diets in a replicated 4×3 Youden square design(three periods and four diets)in mid-gestation and again in late-gestation stages.Results When fed to non-pregnant and late-gestating sows,the standardized ileal digestibility(SID)of CP and most AAs from different SBM were not significantly different(P>0.05).When fed to mid-gestating sows,the SID values for Arg,His,Lys,Phe,Cys,Gly,Ser,and Tyr in SBM 1 were lower than in SBM 4 and 5(P<0.05),whereas SID for Leu from SBM 5 was higher than in SBM 1 and 4(P<0.05).SID values for Ile,Ala,and Asp from SBM 4 were lower than in SBM 1 and 5(P<0.05).Sows had significantly greater SID values for Lys,Ala,and Asp during mid-gestation when compared with late-gestation stages(P<0.05).Mid-gestating sows had greater SID value for Val and lower SID value for Tyr when compared with non-pregnant and late-gestating sows(P<0.01),whereas non-pregnant sows had significantly greater SID value for Met when compared with gestating sows(P<0.01).Conclusions When fed to mid-gestating sows,the SID values for most AAs varied among SBM samples.The SID values for Lys,Met,Val,Ala,Asp,and Tyr in SBM were affected by sow gestation stages.Our findings provide a cornerstone for accurate SBM use in sow diets.

Research on batch multielement rapid quantitative analysis based on the standard curve-assisted calibration-free laserinduced breakdown spectroscopy method

This study proposes a batch rapid quantitative analysis method for multiple elements by combining the advantages of standard curve(SC)and calibration-free laser-induced breakdown spectroscopy(CF-LIBS)technology to achieve synchronous,rapid,and accurate measurement of elements in a large number of samples,namely,SC-assisted CF-LIBS.Al alloy standard samples,divided into calibration and test samples,were applied to validate the proposed method.SC was built based on the characteristic line of Pb and Cr in the calibration sample,and the contents of Pb and Cr in the test sample were calculated with relative errors of 6%and 4%,respectively.SC built using Cr with multiple characteristic lines yielded better calculation results.The relative contents of ten elements in the test sample were calculated using CF-LIBS.Subsequently,the SC-assisted CF-LIBS was executed,with the majority of the calculation relative errors falling within the range of 2%-5%.Finally,the Al and Na contents of the Al alloy were predicted.The results demonstrate that it effectively enables the rapid and accurate quantitative analysis of multiple elements after a single-element SC analysis of the tested samples.Furthermore,this quantitative analysis method was successfully applied to soil and Astragalus samples,realizing an accurate calculation of the contents of multiple elements.Thus,it is important to advance the LIBS quantitative analysis and its related applications.

Spatiotemporal patterns and drivers of cultivated land conversion in Inner Mongolia Autonomous Region,northern China

Protection and optimization of cultivated land resources are of great significance to national food security.Cultivated land conversion in northern China has increased in recent years due to the industrialization and urbanization of society.However,the assessment of cultivated land conversion in this area is insufficient,posing a potential risk to cultivated land resources.This study evaluated the evolution and spatiotemporal patterns of cultivated land conversion in Inner Mongolia Autonomous Region,China,and the driving factors to improve rational utilization and to protect cultivated land resources.The spatiotemporal patterns of cultivated land conversion in Inner Mongolia were analyzed using the cultivated land conversion index,kernel density analysis,a standard deviation ellipse model,and a geographic detector.Results showed that from 2000 to 2020,the trends in cultivated land conversion area and rate in Inner Mongolia exhibited fluctuating growth,with the total area of cultivated land conversion reaching 7307.59 km^(2) at a rate of 6.69%.Spatial distribution of cultivated land conversion was primarily concentrated in the Hetao Plain,Nengjiang Plain,Liaohe Plain,and the Hohhot-Baotou-Ordos urban agglomeration.Moreover,the standard deviational ellipse of cultivated land conversion in Inner Mongolia exhibited a directional southwest-northeast-southwest-northeast distribution,with the northeast-southwest direction identified as the main driving force of spatial change in cultivated land conversion.Meanwhile,cultivated land conversion exhibited an increase-decrease-increase change process,indicating that spatial distribution of cultivated land conversion in Inner Mongolia became gradually apparent within the study period.The geographic detector results further revealed that the main driving factors of cultivated land conversion in Inner Mongolia were the share of secondary and tertiary industries and per-unit area yield of grain,with explanatory rates of 57.00%,55.00%,and 51.00%,respectively.Additionally,improved agricultural production efficiency and the coordinated development of population urbanization and industry resulted in cultivated land conversion.Collectively,the findings of this study indicated that,from 2000 to 2020,the cultivated land conversion in Inner Mongolia was significant and fluctuated in time,and had strong spatial heterogeneity.The primary drivers of these events included the effects of agriculture,population,and social economy.

PDE Standardization Analysis and Solution of TypicalMechanics Problems

A numerical approach is an effective means of solving boundary value problems(BVPs).This study focuses on physical problems with general partial differential equations(PDEs).It investigates the solution approach through the standard forms of the PDE module in COMSOL.Two typical mechanics problems are exemplified:The deflection of a thin plate,which can be addressed with the dedicated finite element module,and the stress of a pure bending beamthat cannot be tackled.The procedure for the two problems regarding the three standard forms required by the PDE module is detailed.The results were in good agreement with the literature,indicating that the PDE module provides a promising means to solve complex PDEs,especially for those a dedicated finite element module has yet to be developed.

Standardization of meibomian gland dysfunction in an Egyptian population sample using a non-contact meibography technique

AIM:To develop normative data for meibomian gland dysfunction(MGD)parameters,using non-contact meibography technique of Sirius Costruzione Strumenti Oftalmici(CSO)machine,in an Egyptian population sample.METHODS:Observational,cross-sectional,analytic study,in which 104 Egyptian volunteers were included.Both upper lids were examined,using“Sirius CSO”machine.Each eyelid was given a degree of meibomian gland loss(MGL),which was calculated by the software of the machine.RESULTS:Mean percentage MGL in right upper lid was of 30.9%±12.6%,and that of left upper lid was 32.6%±11.8%.Thirty-four volunteers(32.7%)had first-degree MGL in their right upper lid,and 67.3%had second-degree loss.One volunteer(1%)had zero-degree MGL in left upper lid,28(26.9%)had first-degree loss,and 75(72.1%)had second-degree loss.Degree of MGL in right upper eyelid was not related to age,but degree of MGL in left upper eyelid increased with age.There was statistically significant difference between both genders for degree of MGL in right eye(P=0.036)and in left eye(P=0.027).CONCLUSION:Noncontact meibography is a useful non-invasive tool for diagnosing MGL.MGL is diagnosed in 100%of apparently normal individuals;26.9%-32.7%of which have first-degree MGL,and 67.3%-72.1%have second-degree MGL.

Quality assessment of the Topo-Iberia CGPS stations and data quality's effects on postfit ionosphere-free phase residuals

This paper analyzed GPS data from the Topo-Iberia network spanning almost 12 years(2008-2020).The data quality information for all 26 Topo-Iberia stations is provided for the first time,complementing the Spanish Geological Survey’s storage work.Data analyses based on quality indicators obtained using TEQC have been carried out.The guidelines and data quality information from the IGS stations have been considered as the quality references,with the stations ALJI,EPCU,and TIOU standing out as the worst stations,while on the contrary,FUEN,PALM,PILA,and TRIA meet the quality requirements to become an IGS station.The relationship between the GPS data quality and their GAMIT-and Gipsy X-derived postfit ionosphere-free phase residuals has also been investigated,and the results reveal an inversely proportional relationship.It has been found that the stations showing an increase in elevation of the horizon line,also show an increase in cycle slips and multipath,are among the poorest quality stations,and among those with the highest postfit RMS of phase residuals.Moreover,the evolution of the vegetation around the antenna should be considered as it could cause a progressive loss of quality,which is not complying with the IGS standards.The quality assessment shows that the Topo-Iberia stations are appropriate for geodetic purposes,but permanent monitoring would be necessary to avoid the least possible loss of data and quality.In addition,a method to characterize the GNSS data quality is proposed.