Performance and Safety Improvement of Induction Motors based on Testing and Evaluation Standards

The induction motor,which converts electrical energy into mechanical energy,has been recognized as the cornerstone of industrialization.The rotor of an induction motor can be either a squirrel cage rotor or a wound-type rotor,both existing as magnetless topologies.Three-phase squirrel cage induction motors are frequently utilized in industrial drives because they are dependable,have high starting torque,are selfstarting and affordable.Single-phase induction motors,on the other hand,are commonly used for small loads such as domestic appliances in form of modest fans,pumps and electric power tools.In South Africa,there have been reports of fires and explosions resulting in live and property loss because of induction motors that have not been thoroughly tested or are incorrectly labelled in terms of ratings,electrical safety and performance.The goal of this study is targeted at preventing end-user injuries and failures caused by non-compliant induction motors,by evaluating locally manufactured/imported induction motors based on tests and evaluation from standards(IEC and SANS).The study is conducted using experimental procedures at the Explosion Prevention Technology and Rotating Machines(EPT and RM)laboratory,South African Bureau of Standards(SABS),South Africa.The main finding from the study shows differences in the nameplate characteristics of various induction motors which could have detrimental effects such as production and operational downtime in their end-use industries,at later stages.

ETSI-ITU Symposium on ICT Sustainability:Standards Driving Environmental Innovation

The symposium will bring together industry leaders,policymakers,researchers and stakeholders to explore the crucial role of standards in promoting sustainable ICT practices.Standards guide the development of technologies that minimize environmental impact and enhance energy efficiency.

Dialogue on standards:directions and difficulties of standardization discipline construction

To probe into the directions and difficulties of standardization discipline construction in China,China Standardization Press organized a pertinent dialogue on July 10.During the event,Yu Xinli,President of China Association for Standardization,was invited as the moderator.Several standardization experts including Song Mingshun,Mai Lyubo,Qiang Yi,Cao Lili,and Huang Manxue from the China Standardization Expert Committee and renowned universities and research institutes in the country were invited as guests to give their insightful views.

Review on the Development of Cosmetic Industry from the Perspective of Group Standards

From the perspective of group standards, the dynamics of the cosmetic industry in the past few years were briefly reviewed and analyzed, including the number of group standards published, types of group standards, groups, and geographical distribution of the groups. The large number of participating groups and the wide range of geographical distribution indicated that group standards could play a positive role in the sustained and positive development of cosmetic industry. The future development of cosmetic industry was also prospected。

Study on Quality Standards of Jianjin Zhuanggu Paste

[Objectives]Some Chinese medicinal materials of Jianjin Zhuanggu Paste were microscopically identified,and several active ingredients were studied by thin-layer identification,which provides reference for further improving the quality standards of hospital preparations.[Methods]The effective components of Jianjin Zhuanggu Paste were qualitatively identified by thin-layer chromatography(TLC).[Results]The microscopic identification of the three Chinese medicinal materials in Jianjin Zhuanggu Paste showed the microscopic characteristics of Radix Codonopsis,Radix Astragali and Radix Notoginseng.TLC identification showed that there were characteristic spots of Radix Codonopsis,Radix Astragali,Radix Rehmanniae Preparata and Radix Notoginseng in Jianjin Zhuanggu Paste.[Conclusions]This study established the quality standard research method of Jianjin Zhuanggu Paste,which further strengthens the safety standards of hospital preparations,and improves the clinical efficacy of drugs,as well as the quality standards of hospital preparations to a certain extent.

Effect of building energy efficiency standards on carbon emission efficiency in commercial buildings

The building sector plays a crucial role in the worldwide shift toward achieving net-zero emissions.Building energy efficiency standards(BEESs)are highly effective policies for reducing carbon emissions.Therefore,exploring the provincial variations in carbon emission efficiency(CEE)in the building sector and identifying the effect of BEESs on CEE is crucial.This study focuses on commercial buildings in China and applies a difference in differences model to evaluate the impact of BEESs on the CEE of commercial buildings.The slacks-based measure–data envelopment analysis model is employed to assess the CEE of commercial buildings in 30 Chinese provinces from 2000 to 2019.Furthermore,heterogeneous tests are used to explore how climate characteristics and economic conditions affect the efficiency of BEESs.The results indicate that BEESs positively influence the CEE of commercial buildings.Specifically,a 1%increase in the intensity of BEESs causes a 0.1484%increase in the CEE of commercial buildings.Moreover,the impact of BEESs is particularly pronounced in the southern and western provinces.This study provides valuable scientific evidence for governments to enhance BEESs implementation.

Formulation of Work-Study Combined and Result-Oriented Integrated Curriculum Standards

According to the Annex Technical Regulations for Integrated Curriculum Development(Trial)in Document No.30 of the General Office of the Ministry of Human Resources and Social Security(2012),this paper studies the formulation of the curriculum standards for the integration of Chinese medicinal materials production.We focus on the formulation ideas of the curriculum standards for the integration of Chinese medicinal materials production,the formulation process of the curriculum standards for the integration of Chinese medicinal materials production,including the description of typical work tasks,the determination of curriculum objectives,the analysis of study content,the description of referential study tasks,teaching implementation suggestions,assessment and evaluation suggestions,which can provide a reference for the development and research of other related integrated courses.

Analysis of Standards and Effects of Police Indirect Court of Human Rights——Taking“Akbay and Others v.Germany”as an Example

The European Court of Human Rights(ECtHR)has ruled that illegal indirect entrapment must meet three criteria simultaneously.This mixed standard requires that the previous direct entrapment violates the“essentially passive,”subsequent indirect entrapment satisfies the“reasonable foreseeability,”and police entrapment of secondary defendants to commit crimes is considered“decisive.”The legal consequences of indirect entrapment are distinguished between general indirect entrapment and illegal indirect entrapment.The basic position of the ECtHR on the consequences of illegal indirect entrapment has shifted from supporting mitigating penalties to recognizing procedural dismissal,and general indirect entrapment is considered a mitigating factor in sentencing.Against the backdrop of increasing internationalization of criminal justice standards,the above criteria and positions have strong implications for the improvement of relevant rules in China.

Unexpected Twinning and Phase-Transition of the Indentation Standards, Their Transition Energies, and Scientific Dichotomy

The general use of aluminium as an indentation standard for the iteration of contact heights for the determination of ISO-14577 hardness and elastic modulus is challenged because of as yet not appreciated phase-changes in the physical force-depth standard curve that seemed to be secured by claims from 1992. The physical and mathematical analyses with closed formulas avoid the still world-wide standardized energy-law violation by not reserving 33.33% (h2 belief) (or 20% h3/2 physical law) of the loading force and thus energy for all not depth producing events but using 100% for the depth formation is a severe violation of the energy law. The not depth producing part of the indentation work cannot be done with zero energy! Both twinning and structural phase-transition onsets and normalized phase-transition energies are now calculated without iterations but with physically correct closed arithmetic equations. These are reported for Berkovich and cubecorner indentations, including their comparison on geometric grounds and an indentation standard without mechanical twinning is proposed. Characteristic data are reported. This is the first detection of the indentation twinning of aluminium at room temperature and the mechanical twinning of fused quartz is also new. Their disqualification as indentation standards is established. Also, the again found higher load phase-transitions disqualify aluminium and fused quartz as ISO-ASTM 14577 (International Standardization Organization and American Society for Testing and Materials) standards for the contact depth “hc” iterations. The incorrect and still world-wide used black-box values for H- and Er-values (the latter are still falsely called “Young’s moduli” even though they are not directional) and all mechanical properties that depend on them. They lack relation to bulk moduli from compression experiments. Experimentally obtained and so published force vs depth parabolas always follow the linear FN = kh3/2 + Fa equation, where Fa is the axis-cut before and after the phase-transition branches (never “h2” as falsely enforced and used for H, Er and giving incorrectly calculated parameters). The regression slopes k are the precise physical hardness values, which for the first time allow for precise calculation of the mechanical qualities by indentation in relation to the geometry of the indenter tip. Exactly 20% of the applied force and thus energy is not available for the indentation depth. Only these scientific k-values must be used for AI-advises at the expense of falsely iterated indentation hardness H-values. Any incorrect H-ISO-ASTM and also the iterated Er-ISO-ASTM modulus values of technical materials in artificial intelligence will be a disaster for the daily safety. The AI must be told that these are unscientific and must therefore be replaced by physical data. Iterated data (3 and 8 free parameters!) cannot be transformed into physical data. One has to start with real experimental loading curves and an absolute ZerodurR standard that must be calibrated with standard force and standard length to create absolute indentation results. .

Analysis of Standards Establishment for the Testing of Electrical Appliances

As science and technology continue to develop,power equipment has become an indispensable part of industrial production and daily life.Whether it is the precise automation machinery utilized on production lines or the convenient electrical appliances found in households,their functionality relies heavily on electrical technology.Nonetheless,without stringent safety and performance assurances,these devices could potentially endanger lives and property.Thus,this paper explores the development strategy for establishing a standardized system within the electrical testing service industry,aiming to ensure safety and reliability.

The effect of high-fidelity simulation in medical nursing based on the healthcare simulation standards of best practice

Background:High-fidelity simulation has been demonstrated to make great progress in learning.However,there is still ongoing exploration on how to fully harness the advantages of this teaching method and enhance its effectiveness.This study conducted high-fidelity simulation in medical nursing based on the Healthcare Simulation Standards of Best Practice and evaluated its effect.Methods:The study was conducted from September 2019 to June 2020.A total of 82 undergraduate nursing students from a university in Shanghai participated in the high-fidelity simulation in medical nursing.The simulation design scale,educational practices in simulation scale,and students’satisfaction and self-confidence were used to evaluate the effect.Results:The mean score of simulation design scale was 4.06±0.63 with the mean scores of all dimensions being over 3.0.The mean score of educational practices in simulation scale was 4.14±0.56 with the mean scores of all dimensions being over 4.0.The mean scores of students’satisfaction and self-confidence were 4.07±0.72 and 3.89±0.58,respectively.Conclusion:Students reported high levels of simulation design and educational practices in simulation.They were also satisfied with learning and reported high levels of self-confidence.Some key points need to be considered so that the learning effects might be optimized.

Preliminary Study on Overseas Applicability of Chinese Architectural Design Standards:Taking China-Aided Construction Projects in Asia Since the Belt and Road Initiative as Examples

This research takes China-aided construction projects in Asia since the Belt and Road Initiative as examples to explore the applicability of Chinese architectural design standards in other Asian countries.So far,the standards demonstrated the highest applicability in South Asia is the best followed by Southeast Asia.Chinese architectural design standards for educational buildings showed the highest applicability,followed by office,medical,and sports buildings.This study puts forward some strategies to improve the applicability of Chinese architectural design standards.These strategies include integrating regionalism and local cultural traditions,optimizing energy efficiency,and aligning designs with local usage habits.This study serves as a reference for similar projects in the future.

塔里木盆地顺北地区顺北84X井超千米含油气重大发现及其意义

塔里木盆地顺北中部北东向走滑断裂带长期处于油气运聚富集的优势区,顺北8号走滑断裂带实钻揭示沿断裂带发育断控缝洞型油气藏,顺北84X井纵向上沿断裂带含油气高度高达1088 m,揭示断控缝洞型油气藏含油气高度大、不受现今构造高低控制。为查明断控缝洞型油气藏含油气高度的主控因素,立足顺北中部奥陶系碳酸盐岩油气藏的成藏地质条件和钻探成果,开展顺北84X井的储层、圈闭及成藏特征等石油地质条件分析,为深化断控缝洞型油气藏认识和向深层评价拓展提供支撑。研究表明:①走滑构造破碎是致密碳酸盐岩成储的关键,其储层发育深度不受碳酸盐岩地层埋深的控制,在近9000 m的埋深条件下仍发育断控缝洞型储集体;②上覆巨厚泥岩盖层顶封、两侧致密灰岩侧封、走滑断裂平面分段和纵向分层变形是形成断控缝洞型圈闭的关键;③油-源对比分析表明油气来自寒武系玉尔吐斯组烃源岩,证实了前期顺北中、东部“寒武多期供烃、构造破裂成储、原地垂向输导、晚期成藏为主、走滑断裂控富”的成藏模式的合理性。顺北84X井的发现揭示塔里木盆地超深层致密碳酸盐岩发育受走滑断裂控制,储层纵向深度大,油气充注足,超深层勘探潜力巨大。

84消毒液对多头月季“折射”瓶插保鲜效果的影响

以多头月季“折射”为试验材料,采用不同浓度的84消毒液分别加入0.1 g/L蔗糖作为瓶插液,从瓶插寿命、观赏价值、花径变化率、切花鲜重变化率、水分平衡值等方面研究其对多头月季的瓶插保鲜效果。结果表明,与对照相比,除0.2 ml/L 84消毒液+0.1g/L蔗糖外,0.4 ml/L、0.6 ml/L、0.8 ml/L的84消毒液分别加入0.1g/L蔗糖均能有效延长多头月季“折射”的瓶插寿命、提高其观赏价值,取得较好的保鲜效果。其中,0.6ml/L 84消毒液+1%蔗糖的瓶插液处理多头月季“折射”的瓶插寿命比对照延长了3.4 d,综合保鲜效果最好。

大豆新品种黑农84品质性状的环境稳定性分析

为明确黑农84的品质稳定性,为新品种的推广应用提供依据,本研究分析了黑农84不同年份、不同地点种植的品质性状变异。结果显示:黑农84是具备高蛋白、低脂肪、高亚麻酸、高异黄酮、高蔗糖和低水苏糖特性的优质功能型品种。在检测的27个品质性状中,16个性状(蛋白质和脂肪含量,蛋脂总量,棕榈酸、硬脂酸、油酸、亚油酸和亚麻酸含量,维生素E含量,水溶性糖,γ-维生素E,δ-维生素E,果糖、葡萄糖、蔗糖和水苏糖含量)的变异系数小于10%,较为稳定。两年的遗传多样性指数变异范围分别为1.08~1.98和1.07~1.73,平均值分别为1.62和1.59,其中α-大豆苷的遗传多样性指数最高(1.98和1.73),棉子糖的遗传多样性指数均最小(1.08和1.07)。黑农84品质性状聚类均可以分为两类,第一类中蛋白质和α-维生素E含量较高,脂肪和异黄酮含量较低;第二类中大豆苷、m-大豆苷、α-大豆苷和m-染料木苷含量较低。黑农84优质性状的环境稳定性为该品种的遗传育种和加工应用等提供了理论依据。

84消毒液对304不锈钢腐蚀的影响

目的 探究84消毒液对304不锈钢腐蚀行为的影响及其腐蚀机理。方法 采用数码相机和三维视频显微镜对304不锈钢进行宏观与微观腐蚀形貌观察,结合电化学测试分析研究84消毒液对304不锈钢腐蚀行为的影响。结果 在喷洒试验初期,在不锈钢表面可观察到少量较浅的点蚀坑生成,腐蚀电位升高,腐蚀电流密度下降。随着喷洒时间的延长,试验后期,点蚀坑增加和变大,腐蚀电位降低,腐蚀电流密度提高,304不锈钢的耐腐蚀性能降低,腐蚀速率提高。结论 大气环境下喷洒84消毒液,304不锈钢发生局部腐蚀。试验初期,NaClO促进了不锈钢钝化膜的形成,腐蚀速率下降。随着喷洒时间的延长,NaClO被还原形成的Cl^(–),使钝化膜发生破裂,促进了不锈钢的点蚀。

ZIF-L(Co)@P84衍生炭的制备及染料吸附性能

以ZIF-L(Co)为晶体,聚酰亚胺P84为聚合物,不同的炭化温度为变量,制备了基于ZIF-L(Co)掺杂P84[ZIF-L(Co)@P84]的衍生炭材料。通过SEM、FTIR、XRD、TGA等对ZIF-L(Co)@P84衍生炭进行表征,并进行染料吸附测试。结果表明,吸附时间为8 h,炭化温度为650℃的ZIF-L(Co)@P84衍生炭吸附效果最佳,该材料对亚甲基蓝的吸附率为94.269%,对甲基橙的吸附率为64.629%,表现出良好的吸附性能,并对亚甲基蓝具有一定的吸附选择性。

旱地小麦新品种云麦84的丰产性、稳产性和产量构成因素分析

为了解旱地小麦新品种云麦84的产量特性和推广应用价值,利用云南省2019—2021年地麦区域试验数据和2020—2021年生产试验数据,对云麦84的丰产性、稳产性和产量构成因素进行分析。结果表明,云麦84在2019—2021年2年度区域试验平均产量分别为5620.5、5223.0 kg/hm^(2),生产试验平均产量为5202.5 kg/hm^(2),在参试品种中均排名前列,且显著高于对照品种云麦56,表明其丰产性优;高稳系数在2019—2020年排名第3,2020—2021年排名第9,说明云麦84的产量年际间差异较大;产量构成因素分析表明,穗粒数变异系数较大,说明穗粒数受环境影响较大;相关性分析表明,穗粒数、千粒质量与产量互呈显著正相关关系,说明可通过增加穗粒数和千粒质量增加产量。综合分析,云麦84是一个高产旱地小麦新品种,其高产栽培的重点是增加穗粒数和千粒质量。

The transcription factor ZmNAC84 increases maize salt tolerance by regulating ZmCAT1 expression

Salt stress severely affects plant growth and yield.The transcription factor NAC plays a variety of important roles in plant abiotic stress,but we know relatively little about the specific molecular mechanisms of NAC in antioxidant defense.Here,our genetic studies reveal the positive regulation of salt tolerance in maize by the transcription factor ZmNAC84.Under salt stress,overexpression of ZmNAC84 in maize increased the expression of ZmCAT1,enhanced CAT activity,and consequently reduced H_(2)O_(2) accumulation,thereby improving salt stress tolerance in maize.Whereas RNA interference-mediated knockdown of ZmNAC84 produced the opposite effect.Subsequently,we found that ZmNAC84 directly binds to and regulates the expression of the ZmCAT1 promoter,and the hybridized material also demonstrated that ZmCAT1 is a downstream target gene of ZmNAC84.In addition,phenotypic and biochemical analyses indicated that ZmCAT1 positively regulated salt tolerance by regulating H_(2)O_(2) accumulation under salt stress.Taken together,these results reveal the function of ZmNAC84 in regulating ZmCAT1-mediated antioxidant defense in response to salt stress in plants.

Development of a new cerebral ischemia reperfusion model of Mongolian gerbils and standardized evaluation system

Background:The Mongolian gerbil is an excellent laboratory animal for preparing the cerebral ischemia model due to its inherent deficiency in the circle of Willis.However,the low incidence and unpredictability of symptoms are caused by numerous complex variant types of the circle.Additionally,the lack of an evaluation system for the cer-ebral ischemia/reperfusion(I/R)model of gerbils has shackled the application of this model.Methods:We created a symptom-oriented principle and detailed neurobehavioral scoring criteria.At different time points of reperfusion,we analyzed the alteration in locomotion by rotarod test and grip force score,infarct volume by triphenyltetrazo-lium chloride(TTC)staining,neuron loss using Nissl staining,and histological charac-teristics using hematoxylin-eosin(H&E)straining.Results:With a successful model rate of 56%,32 of the 57 gerbils operated by our method harbored typical features of cerebral I/R injury,and the mortality rate in the male gerbils was significantly higher than that in the female gerbils.The suc-cessfully prepared I/R gerbils demonstrated a significant reduction in motility and grip strength at 1 day after reperfusion;formed obvious infarction;exhibited typi-cal pathological features,such as tissue edema,neuronal atrophy and death,and vacuolated structures;and were partially recovered with the extension of reperfu-sion time.Conclusion:This study developed a new method for the unilateral common carotid artery ligation I/R model of gerbil and established a standardized evaluation system for this model,which could provide a new cerebral I/R model of gerbils with more practical applications.