In the continuous casting production of medium carbon steel (whose mass fraction of carbon is 0.09 % to 0.16 %) and high strength low alloy steel (whose mass fraction of Mn is 0.90 % to 1.40 %), flecks occurring the m...In the continuous casting production of medium carbon steel (whose mass fraction of carbon is 0.09 % to 0.16 %) and high strength low alloy steel (whose mass fraction of Mn is 0.90 % to 1.40 %), flecks occurring the most often are usually longitudinal and star cracks. In additional to the employment of a galvanized plate mould, two kinds of fluxes with special properties were studied and used to harmonize the conflicts between the function of heat transfer and lubrication. An industrial application revealed that the crystallizing temperature (Tc) and crystal ratio (R) of fluxes have a crucible effect on impeding the occurrence of above defects on a slab surface. In the case of slab section (180 to 240) mm(1000 to 1400) mm and casting speed Vc of (0.7 to 1.2) m/min, the optimized parameters of fluxes are Tc of (1170 to 1190) ℃, R of 80 % to 95 % for medium carbon steel, and Tc of (1100 to 1150) ℃, plus R of 40 % to 60 % for high strength low alloy steel.展开更多
In this paper, the functions of warping displacement interruption defined on the crack lines are taken for the fundamental unknown functions. The torsion problem of cracked circular cylinder is reduced to solving a sy...In this paper, the functions of warping displacement interruption defined on the crack lines are taken for the fundamental unknown functions. The torsion problem of cracked circular cylinder is reduced to solving a system of integral equations with strongly singular kernels. Using the numerical method of these equations, the torsional rigidities and the stress intensity factors are calculated to solve the torsion problem of circular cylinder with star-type and other different types of cracks. The numerical results are satisfactory.展开更多
文摘In the continuous casting production of medium carbon steel (whose mass fraction of carbon is 0.09 % to 0.16 %) and high strength low alloy steel (whose mass fraction of Mn is 0.90 % to 1.40 %), flecks occurring the most often are usually longitudinal and star cracks. In additional to the employment of a galvanized plate mould, two kinds of fluxes with special properties were studied and used to harmonize the conflicts between the function of heat transfer and lubrication. An industrial application revealed that the crystallizing temperature (Tc) and crystal ratio (R) of fluxes have a crucible effect on impeding the occurrence of above defects on a slab surface. In the case of slab section (180 to 240) mm(1000 to 1400) mm and casting speed Vc of (0.7 to 1.2) m/min, the optimized parameters of fluxes are Tc of (1170 to 1190) ℃, R of 80 % to 95 % for medium carbon steel, and Tc of (1100 to 1150) ℃, plus R of 40 % to 60 % for high strength low alloy steel.
基金Project supported by the Fund of the State Education Commission of China
文摘In this paper, the functions of warping displacement interruption defined on the crack lines are taken for the fundamental unknown functions. The torsion problem of cracked circular cylinder is reduced to solving a system of integral equations with strongly singular kernels. Using the numerical method of these equations, the torsional rigidities and the stress intensity factors are calculated to solve the torsion problem of circular cylinder with star-type and other different types of cracks. The numerical results are satisfactory.
