期刊文献+
共找到90篇文章
< 1 2 5 >
每页显示 20 50 100
Suppression of low-frequency ultrasound broadband vibration using star-shaped single-phase metamaterials
1
作者 Rui Zhao Jian Zheng +4 位作者 Jin Guo Yunbo Shi Hengzhen Feng Jun Tang Jun Liu 《Defence Technology(防务技术)》 SCIE EI CAS CSCD 2024年第4期217-224,共8页
In order to suppress the low-frequency ultrasound vibration in the broadband range of 20 k Hz—100 k Hz,this paper proposes and discusses an acoustic metamaterial with low-frequency ultrasound vibration attenuation pr... In order to suppress the low-frequency ultrasound vibration in the broadband range of 20 k Hz—100 k Hz,this paper proposes and discusses an acoustic metamaterial with low-frequency ultrasound vibration attenuation properties,which is configured by hybrid arc and sharp-angle convergent star-shaped lattices.The effect of the dispersion relation and the bandgap characteristic for the scatterers in star-shaped are simulated and analyzed.The target bandgap width is extended by optimizing the geometry parameters of arc and sharp-angle convergent lattices.The proposed metamaterial configured by optimized hybrid lattices exhibits remarkable broad bandgap characteristics by bandgap complementarity,and the simulation results verify a 99%vibration attenuation amplitude can be obtained in the frequency of20 k Hz—100 k Hz.After the fabrication of the proposed hybrid configurational star-shaped metamaterial by 3D printing technique,the transmission loss experiments are performed,and the experimental results indicate that the fabricated metamaterial has the characteristics of broadband vibration attenuation and an amplitude greater than 85%attenuation for the target frequency.These results demonstrate that the hybrid configurational star-shaped metamaterials can effectively widen the bandgap and realize high efficiency attenuation,which has capability for the vibration attenuation in the application of highprecise equipment. 展开更多
关键词 star-shaped metamaterials BROADBAND Vibration attenuation Low-frequency ultrasound vibration Transmission loss
下载PDF
Synthesis and characterization of novel star-shaped pyridine cored compounds with alternating carbazole and triphenylamine moieties 被引量:2
2
作者 Ji Bing Yuan Zhi Guo Zhang +1 位作者 Louis Man Leung Ke Li Zhang 《Chinese Chemical Letters》 SCIE CAS CSCD 2008年第6期647-650,共4页
Amorphous 2,4,6-trissubstituted pyridines containing three peripheral carbazole or two triphenylamine and one carbazole moieties, respectively, have been synthesized and characterized. The properties of the compounds ... Amorphous 2,4,6-trissubstituted pyridines containing three peripheral carbazole or two triphenylamine and one carbazole moieties, respectively, have been synthesized and characterized. The properties of the compounds are investigated by UV-vis absorption, photoluminescence spectroscopy, thermal analysis as well as cyclic voltammetry. The results show that the compounds have high thermal stability, emit blue light. Also, the compounds possess the HOMO and LUMO energy levels comparable to those of NPB. The effects of different substituents on the electronic properties of the materials have been discussed. 展开更多
关键词 star-shaped CARBAZOLE Tdphenylamine PYRIDINE
下载PDF
SYNTHESIS OF HETEROARM STAR-SHAPED POLYMER BY THE USE OF POLYFUNCTIONAL CHAIN-TRANSFER AGENT via CONVENTIONAL FREE RADICAL POLYMERIZATION 被引量:2
3
作者 石艳 《Chinese Journal of Polymer Science》 SCIE CAS CSCD 2008年第3期321-329,共9页
Heteroarm star-shaped polymers were synthesized by conventional free radical polymerization in two steps by the use of polyfunctional chain transfer agent.In the first step,free radical polymerization of methyl methac... Heteroarm star-shaped polymers were synthesized by conventional free radical polymerization in two steps by the use of polyfunctional chain transfer agent.In the first step,free radical polymerization of methyl methacrylate was carried out in the presence of a polyfunctional chain transfer agent,pentaerythritol tetrakis(3-mercaptopropinate).At appropriate monomer conversions,two-arm PMMA having two residual thiol groups at the chain center or three-arm PMMA having one residual thiol group at the core were o... 展开更多
关键词 Heteroarm star-shaped polymer Conventional free radical polymerization Polyfunctional chain-transfer agent
下载PDF
Fiber-based joint time and frequency dissemination via star-shaped commercial telecommunication network 被引量:1
4
作者 袁一博 王波 王力军 《Chinese Physics B》 SCIE EI CAS CSCD 2017年第8期96-101,共6页
A fiber-based, star-shaped joint time and frequency dissemination scheme is demonstrated. By working in cooperation with the existing commercial telecommunication network. Our scheme enables the frequency, time, and d... A fiber-based, star-shaped joint time and frequency dissemination scheme is demonstrated. By working in cooperation with the existing commercial telecommunication network. Our scheme enables the frequency, time, and digital data networks to be integrated together and could represent an ideal option of interconnection among scientific institutions.The compensation functions of the time and frequency transfer scheme are set at the client nodes. The complexity of the central node is thus reduced, and future expansion by the addition of further branches will be accomplished more easily.During a performance test in which the ambient temperature fluctuation is 30℃/day, timing signal dissemination stability is achieved to be approximately ±50 ps along 25-km-long fiber spools. After calibration, a timing signal synchronization accuracy of 100 ps is also realized. The proposed scheme offers an option of the construction of large-scale fiber-based frequency and time transfer networks. 展开更多
关键词 time synchronization telecommunication network frequency transfer star-shaped network
下载PDF
PREPARATION AND CHARACTERIZATION OF INCLUSION COMPLEXES OF TWO-ARM LINEAR AND FOUR-ARM STAR-SHAPED POLY(ε-CAPROLACTONE)S WITHα-CYCLODEXTRIN 被引量:1
5
作者 Lu Wang Jing-liang Wang 董常明 《Chinese Journal of Polymer Science》 SCIE CAS CSCD 2006年第3期245-252,共8页
Both four-ann star-shaped poly(ε-caprolactone) (4sPCL) and two-ann linear PCL (2LPCL) were synthesized and their inclusion complexation with α-cyclodextrin (α-CD) were studied. The inclusion complexes (ICs... Both four-ann star-shaped poly(ε-caprolactone) (4sPCL) and two-ann linear PCL (2LPCL) were synthesized and their inclusion complexation with α-cyclodextrin (α-CD) were studied. The inclusion complexes (ICs) formed between the PCL polymers and α-CD were characterized by ^1H-NMR, DSC, TGA, WAXD, and FT-1R, respectively. Both branch ann number and molecular weight of the PCL polymers have apparent effect on the stoichiometry (CL:CD, mol:mol) of these ICs. All these analytical results indicate that the branch arms of the PCL polymers are incorporated into the hydrophobic α-CD cavities and their original crystalline properties are completely suppressed. Moreover, the inclusion complexation between two-ann linear or four-ann star-shaped PCL polymers and α-CD not only enhances the thermal stability of the guest PCL polymers but also improves that of α-CD. 展开更多
关键词 Inclusion complexes Linear poly(ε-caprolactone) star-shaped poly(ε-caprolactone) Thermal stability.
下载PDF
FIXED POINTS OF NONEXPANSIVE MAPPINGS ON STAR-SHAPED SUBSETS OF A CONVEX METRIC SPACE
6
作者 邓磊 丁协平 《Applied Mathematics and Mechanics(English Edition)》 SCIE EI 1992年第2期135-141,共7页
In this paper, we give some characteristic properties of star-shaped sets which include a subset of a convex metric space. Using the characteristic properties, we discuss the existence problems of fixed points of none... In this paper, we give some characteristic properties of star-shaped sets which include a subset of a convex metric space. Using the characteristic properties, we discuss the existence problems of fixed points of nonexpansive type mappings on star-shaped subsets of convex metric spaces, which generalize the recent results obtained by Ding Xie-ping, Beg and Azam. Finally, we give an example which shows that our generalizations are essential. 展开更多
关键词 star-shaped set star centre normal structure of a star-shaped set
下载PDF
Star-shaped Differentiable Functions and Star-shaped Differentials
7
作者 PAN SHAO-RONG ZHANG HONG-WEI ZHANG LI-WEI 《Communications in Mathematical Research》 CSCD 2010年第1期41-52,共12页
Based on the isomorphism between the space of star-shaped sets and the space of continuous positively homogeneous real-valued functions, the star-shaped differential of a directionally differentiable function is defin... Based on the isomorphism between the space of star-shaped sets and the space of continuous positively homogeneous real-valued functions, the star-shaped differential of a directionally differentiable function is defined. Formulas for star-shaped differential of a pointwise maximum and a pointwise minimum of a finite number of directionally differentiable functions, and a composite of two directionaUy differentiable functions are derived. Furthermore, the mean-value theorem for a directionaUy differentiable function is demonstrated. 展开更多
关键词 The space of star-shaped sets gauge function isometrical isomorphism directionally differentiable function star-shaped differential mean-value theorem
下载PDF
SYNTHESIS,CHARACTERIZATION AND NANOPARTICLE FORMATION OF STAR-SHAPED POLY(L-LACTIDE)WITH SIX ARMS
8
作者 董常明 《Chinese Journal of Polymer Science》 SCIE CAS CSCD 2008年第2期161-169,共9页
Well-defined star-shaped poly(L-lactide)with six arms(sPLLA)was synthesized via the ring-opening polymerization of L-lactide using dipentaerythritol as initiator and stannous octoate as catalyst in bulk at 125~C.The e... Well-defined star-shaped poly(L-lactide)with six arms(sPLLA)was synthesized via the ring-opening polymerization of L-lactide using dipentaerythritol as initiator and stannous octoate as catalyst in bulk at 125~C.The effects of molar ratios of both monomer to initiator and monomer to catalyst on the molecular weights of as-synthesized sPLLA polymers were in detail investigated.The molecular weights of sPLLA polymers linearly increased with the molar ratio of monomer to initiator,and the molecular weight dist... 展开更多
关键词 star-shaped poly(L-Lactide) Ring-opening polymerization Nanoparticles Drug delivery.
下载PDF
pH-sensitive micelles self-assembled from star-shaped TPGS copolymers with ortho ester linkages for enhanced MDR reversal and chemotherapy
9
作者 Yong Xu Shi Wang +4 位作者 Longshun Yang Yuhang Dong Yafang Zhang Guoqing Yan Rupei Tang 《Asian Journal of Pharmaceutical Sciences》 SCIE CAS 2021年第3期363-373,共11页
TPGS approved by FDA can be used as a P-gp inhibitor to effectively reverse multi-drug resistance(MDR)and as an anticancer agent for synergistic antitumor effects.However,the comparatively high critical micelle concen... TPGS approved by FDA can be used as a P-gp inhibitor to effectively reverse multi-drug resistance(MDR)and as an anticancer agent for synergistic antitumor effects.However,the comparatively high critical micelle concentration(CMC),low drug loading(DL)and poor tumor target limit its further clinical application.To overcome these drawbacks,the pH-sensitive star-shaped TPGS copolymers were successfully constructed via using pentaerythritol as the initial materials,ortho esters as the pH-triggered linkages and TPGS active-ester as the terminated MDR material.The amphiphilic star-shaped TPGS copolymers could self-assemble into free and doxorubicin(DOX)-loaded micelles at neutral aqueous solutions.The micelles exhibited the lower CMC(8.2×10^(−5) mg/ml),higher DL(10.8%)and long-term storage and circulation stability,and showed enhanced cellular uptake,apoptosis,cytotoxicity,and growth inhibition for in vitro MCF-7/ADR and/or MCF-7/ADR multicellular spheroids and in vivo MCF-7/ADR tumors via efficiently targeted drug release at tumoral intracellular pH(5.0),MDR reversal of TPGS,and synergistic effect of DOX and TPGS.Therefore,the pH-sensitive micelles self-assembled from star-shaped TPGS copolymers with ortho ester linkages are potentially useful to clinically transform for enhanced MDR cancer treatment. 展开更多
关键词 TPGS Ortho esters star-shaped copolymers MDR reversal
下载PDF
Synthesis and Physicochemical Characterization of Biodegradable Star-Shaped Poly Lactide-Co-Glycolide-<i>β</i>-Cyclodextrin Copolymer Nanoparticles Containing Albumin
10
作者 Soodabeh Davaran Akbar Rezaei +4 位作者 Somayeh Alimohammadi Amir Ahmad Khandaghi Kazem Nejati-Koshki Hamid Tayefi Nasrabadi Abolfazl Akbarzadeh 《Advances in Nanoparticles》 2014年第1期14-22,共9页
The purposes of this research were to synthesize and characterize star-shaped poly lactide-co-glycolide-β-cyclo-dextrin (PLGA-β-CD) copolymer by reacting L-lactide, glycolide and β-cyclodextrin in the presence of s... The purposes of this research were to synthesize and characterize star-shaped poly lactide-co-glycolide-β-cyclo-dextrin (PLGA-β-CD) copolymer by reacting L-lactide, glycolide and β-cyclodextrin in the presence of stannous octoate as a catalyst. The structure of PLGA-β-CD copolymer was confirmed with 1H-NMR, 13C-NMR and FT-IR spectra. Albumin as a model peptide drug was encapsulated within nanoparticles made of PLGA-β-CD with a modified double emulsion method. Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) photomicrographs showed that the nanoparticles have the mean diameter within the range of 80 - 210 nm. Also they were almost spherical in shape. Effects of the experimental parameters, such as copolymer composition, copolymer concentration, and reaction temperature, on particular size and encapsulation efficiency were investigated. 展开更多
关键词 ALBUMIN star-shaped Poly Lactide-Co-Glycolide β-Cyclodextrin Nanoparticles
下载PDF
Nondoped-type White Organic Light-Emitting Diode Using Star-Shaped Hexafluorenylbenzene as an Energy Transfer Layer
11
作者 Jun-sheng Yu Tao Ma +2 位作者 Shuang-ling Lou Ya-dong Jiang Qing Zhang 《Chinese Journal of Chemical Physics》 SCIE CAS CSCD 北大核心 2008年第5期500-504,共5页
White organic light-emitting diodes (WOLEDs) with a structure of indium-tin-oxide (ITO)/N,N'-bis- (1-naphthyl)-N,N'-diphenyl- (1, 1'-biphenyl)-4,4'-diamine (NPB)/1,2,3,4,5,6-hexakis(9,9-diethyl-9H-fluor... White organic light-emitting diodes (WOLEDs) with a structure of indium-tin-oxide (ITO)/N,N'-bis- (1-naphthyl)-N,N'-diphenyl- (1, 1'-biphenyl)-4,4'-diamine (NPB)/1,2,3,4,5,6-hexakis(9,9-diethyl-9H-fluoren-2- yl)benzene (HKEthFLYPh)/5,6,11,12-tetraphenylnaphtacene (rubrene)/tris(8-hydroxyquinoline) aluminum (Alq3)/Mg:Ag were fabricated by vacuum deposition method, in which a novel star-shaped hexafluorenyl- benzene HKEthFLYPh was used as an energy transfer layer, and an ultrathin layer of rubrene was inserted between HKEthFLYPh and Alq3 layers as a yellow light-emitting layer instead of using a time-consuming doping process. A fairly pure WOLED with Commissions Internationale De L'Eclairage (CIE) coordinates of (0.32, 0.33) was obtained when the thickness of rubrene was 0.3 nm, and the spectrum was insensitive to the applied voltage. The device yielded a maximum luminance of 4816 cd/m2 at 18 V. 展开更多
关键词 White organic light-emitting diode diethyl-9H-fluoren-2-yl)benzene Energy transfer star-shaped hexafluorenylbenzene 1 2 3 4 5 6-hexakis(9 9- Ultrathin layer
下载PDF
Si69/白炭黑/炭黑补强体系对SIBR胎面胶性能的影响 被引量:17
12
作者 王妮妮 王启飞 +3 位作者 廖明义 于国柱 梁爱民 史工昌 《弹性体》 CAS 2006年第4期17-20,共4页
研究了偶联剂Si69/白炭黑/炭黑体系对苯乙烯/丁二烯/异戊二烯三元橡胶(SIBR)的硫化特性、物理机械性能和动态力学性能的影响。结果表明,Si69在SIBR胶料中的最佳用量为白炭黑用量的8%~10%;随着白炭黑用量的增加,橡胶的滚动... 研究了偶联剂Si69/白炭黑/炭黑体系对苯乙烯/丁二烯/异戊二烯三元橡胶(SIBR)的硫化特性、物理机械性能和动态力学性能的影响。结果表明,Si69在SIBR胶料中的最佳用量为白炭黑用量的8%~10%;随着白炭黑用量的增加,橡胶的滚动阻力下降,白炭黑与炭黑用量在20/25(质量比)左右,橡胶的综合性能达到最佳。 展开更多
关键词 炭黑 白炭黑 SI69 sibr
下载PDF
BuLi/TMEDA体系合成SIBR 被引量:12
13
作者 王启飞 王妮妮 +4 位作者 史工昌 廖明义 商宜美 于国柱 梁爱民 《弹性体》 CAS 2005年第5期11-14,共4页
以正丁基锂(BuLi)为引发剂,四甲基乙二胺(TMEDA)为结构调节剂,四氯化锡为偶联剂合成出了星型锡偶联SIBR。采用IR、GPC、DSC、DMA等仪器对合成的SIBR的微观结构、分子量大小及分布、玻璃化转变温度和动态力学性能进行了分析测试。研究结... 以正丁基锂(BuLi)为引发剂,四甲基乙二胺(TMEDA)为结构调节剂,四氯化锡为偶联剂合成出了星型锡偶联SIBR。采用IR、GPC、DSC、DMA等仪器对合成的SIBR的微观结构、分子量大小及分布、玻璃化转变温度和动态力学性能进行了分析测试。研究结果表明,合成的SIBR随着TMEDA/Li的增大,tans1,4-Bd和1,4-Ip结构含量明显减少,3,4-Ip和总1,2结构含量明显增多;SIBR样品0℃的tanδ值增加非常明显,60℃的tanδ值均低于0.12。物理机械性能测试表明,合成的样品符合胎面胶的要求,且动态力学性能能够满足高性能胎面胶的需求。 展开更多
关键词 sibr TMEDA 微观结构 物理机械性能 动态力学性能
下载PDF
嵌段型SIBR的制备与性能研究 被引量:7
14
作者 王启飞 于国柱 +3 位作者 梁爱民 段海东 王妮妮 廖明义 《橡胶工业》 CAS 北大核心 2006年第9期534-538,共5页
采用正丁基锂为引发剂,环己烷为溶剂,四氢呋喃为结构调节剂,四氯化锡为偶联剂制备嵌段结构的苯乙烯异戊二烯丁二烯共聚橡胶(SIBR),并对其性能进行研究。结果表明,单体配比和结构调节剂加入时间对SIBR硫化胶物理性能有影响,结构调节剂较... 采用正丁基锂为引发剂,环己烷为溶剂,四氢呋喃为结构调节剂,四氯化锡为偶联剂制备嵌段结构的苯乙烯异戊二烯丁二烯共聚橡胶(SIBR),并对其性能进行研究。结果表明,单体配比和结构调节剂加入时间对SIBR硫化胶物理性能有影响,结构调节剂较早加入可提高SIBR硫化胶的物理性能;与溶聚丁苯橡胶(SSBR)/BR/NR并用胶相比,SIBR的玻璃化温度较低,耐低温性能较好,抗湿滑性能优异,滚动阻力相差不大。 展开更多
关键词 结构调节剂 sibr抗湿滑性能 滚动阻力
下载PDF
星型SIBR合成中偶联反应的研究 被引量:5
15
作者 严自力 金关泰 +1 位作者 王新 张兴英 《弹性体》 CAS 2001年第1期6-8,5,共4页
以n -BuLi为引发剂 ,环己烷为溶剂 ,SnCl4为偶联剂 ,在不同极性添加剂存在下合成了苯乙烯、异戊二烯和丁二烯的偶联星型无规共聚物SIBR。研究了聚合阶段不同极性添加剂 (THF、THF -2G和 2G)、偶联温度、偶联剂用量及偶联方式对偶联效果... 以n -BuLi为引发剂 ,环己烷为溶剂 ,SnCl4为偶联剂 ,在不同极性添加剂存在下合成了苯乙烯、异戊二烯和丁二烯的偶联星型无规共聚物SIBR。研究了聚合阶段不同极性添加剂 (THF、THF -2G和 2G)、偶联温度、偶联剂用量及偶联方式对偶联效果的影响。研究结果表明适宜的工艺条件为 :极性添加剂THF或THF -2G ;偶联温度 70℃ ;偶联剂用量n(SnCl4) /n(Li) =0 .40~ 0 .45 (THF作极性添加剂 )或 0 .3 5 (THF -2G作极性添加剂 ) ;二次偶联、偶联前加入适量极性添加剂及丁二烯戴帽 。 展开更多
关键词 星型sibr 偶联反应 集成橡胶 合成
下载PDF
国产集成橡胶SIBR基本性能的研究 被引量:12
16
作者 于少翼 张萍 赵树高 《弹性体》 CAS 2012年第1期62-66,共5页
研究了国产集成橡胶(SIBR)的基本性能,结果表明:SIBR与乳聚丁苯橡胶物理机械性能相当;其动态力学性能与通用乳聚丁苯橡胶相比,SIBR在0℃具有更高的tanδ值,在60℃具有更低的tanδ值,说明SIBR具有高抗湿滑性和低滚动阻力;压缩疲劳温升实... 研究了国产集成橡胶(SIBR)的基本性能,结果表明:SIBR与乳聚丁苯橡胶物理机械性能相当;其动态力学性能与通用乳聚丁苯橡胶相比,SIBR在0℃具有更高的tanδ值,在60℃具有更低的tanδ值,说明SIBR具有高抗湿滑性和低滚动阻力;压缩疲劳温升实验结果表明SIBR比丁苯橡胶压缩疲劳温升低,压缩永久变形率更小。实验证明SIBR是一种良好的轮胎胎面用橡胶。 展开更多
关键词 集成橡胶 sibr 动态力学性能 DMA 生热特性
下载PDF
线形无规共聚物SIBR的合成与表征 被引量:5
17
作者 严自力 金关泰 +1 位作者 王新 张兴英 《弹性体》 CAS 2001年第3期12-14,共3页
采用阴离子聚合法合成了苯乙烯 -异戊二烯 -丁二烯无规共聚物 (SIBR) ,并通过1HNMR分析对产物序列结构进行了表征。实验证明 ,控制聚合温度在 5 0~ 70℃ ,n(THF)∶n(Li)在 (9~ 2 5 )∶1之间或n(THF)∶n(Li)为 7.0∶1且 2G与Li摩尔比在... 采用阴离子聚合法合成了苯乙烯 -异戊二烯 -丁二烯无规共聚物 (SIBR) ,并通过1HNMR分析对产物序列结构进行了表征。实验证明 ,控制聚合温度在 5 0~ 70℃ ,n(THF)∶n(Li)在 (9~ 2 5 )∶1之间或n(THF)∶n(Li)为 7.0∶1且 2G与Li摩尔比在 0 .0 8~ 0 .45之间或 2G与Li的摩尔比在 0 .10~ 0 .35之间可调节 1,2 -PB与PB摩尔比在 2 1%~ 32 %之间、3,4-PI与PI摩尔比在 39%~ 5 2 展开更多
关键词 线性无规共聚物 sibr 苯乙烯-异戊二烯-丁二烯 微观结构 阴离子整合 表征
下载PDF
SIBR用于胎面胶的研究进展 被引量:9
18
作者 严自力 王新 +1 位作者 金关泰 张兴英 《石化技术》 CAS 1998年第4期237-241,共5页
简述了集成橡胶SIBR的发展背景及其用于胎面胶时结构与性能(动态力学性能与使用性能)关系的理论研究,详细讨论了SIBR的结构、合成方法和性能的关系。
关键词 集成橡胶 sibr 胎面胶 轮胎
下载PDF
理想的胎面材料—集成橡胶SIBR (Ⅱ)集成橡胶的结构及性能 被引量:15
19
作者 张华 张兴英 +1 位作者 程珏 金关泰 《弹性体》 CAS 1997年第4期44-48,共5页
本文着重叙述了集成橡胶SIBR的结构和动态力学性能。
关键词 集成橡胶 结构 力学性 轮胎 胎面材料 sibr
下载PDF
高性能化集成橡胶SIBR的合成与应用 被引量:3
20
作者 魏绪玲 魏玉丽 +1 位作者 龚光碧 梁滔 《材料导报(纳米与新材料专辑)》 EI CAS 2014年第2期319-322,330,共5页
集成橡胶SIBR是一种备受关注的高性能化橡胶,能够兼顾低滚动阻力、高抗湿滑性和高耐磨性能。总结了集成橡胶的概念、结构与性能,并详细讨论了集成橡胶的合成方法,包括阴离子聚合、乳液聚合和配位聚合。进而介绍了集成橡胶的应用,最后展... 集成橡胶SIBR是一种备受关注的高性能化橡胶,能够兼顾低滚动阻力、高抗湿滑性和高耐磨性能。总结了集成橡胶的概念、结构与性能,并详细讨论了集成橡胶的合成方法,包括阴离子聚合、乳液聚合和配位聚合。进而介绍了集成橡胶的应用,最后展望了集成橡胶的未来发展。 展开更多
关键词 集成橡胶 sibr 合成 应用
下载PDF
上一页 1 2 5 下一页 到第
使用帮助 返回顶部