追求卓越的早期教育质量--OECD早期保教质量调查报告“Starting StrongⅢ”述评

早期教育质量的影响因素是多方面的,OECD成员国在提高早期教育质量方面作了许多积极探索,Starting StrongⅢ就是在广泛调研基础上形成的一份聚焦质量的报告。通过探讨Starting StrongⅢ的形成背景,进而分析其五个与早期教育质量密切相关的重要政策杠杆,能为思考我国学前教育发展提供些许启示。

制浆造纸翻译工作坊平台START翻译实训模式研究与实践

制浆造纸专业英语翻译在当今全球化的经济环境中扮演着非常重要的角色,不仅是技术交流的工具,还是推动文化交流、学术研究以及国际贸易的重要力量。针对如今制浆造纸专业英语翻译教学存在的种种问题,提出基于翻译工作坊平台的START翻译实训模式。对此,对比分析了制浆造纸传统英语翻译教学与翻译工作坊教学的区别,探究了START翻译实训模式的构成与在制浆造纸专业英语翻译教学中的应用意义,并研究了基于翻译工作坊的制浆造纸专业英语START翻译实训模式的构建与实施策略,以期发挥START翻译实训的教学价值,提升制浆造纸专业英语翻译教学水平。

Reconstruction of the starting time series of rainy season in Yunnan and the evolvement of summer monsoon during 1711-1982

According to the textual research into the historical documents dominated by archives yearly, as well as the verification with several other kinds of data, the later or earlier starting time of the rainy seasons in Yunnan during 1711-1982 has been reconstructed. The analysis indicates that there are obvious fluctuations in the starting date of the rainy seasons in Yunnan in a year or years, and long fluctuation on the decadal scale. The rainy season comes earlier in the early 18th century, later in the 19th century and earlier again in the 20th century. This reflects to a certain degree the gradual change of the summer monsoon in Yunnan. There exists an obvious quasi-3 years cycle, which is related to EI-Nino＇s quasi-3 years cycle, and a 11.3-year cycle which is notably related to the 11-year cycle of the solar activity of starting date of the rainy seasons in Yunnan. Meanwhile, the dissertation finds that the EI-Nino is very important to the starting date of the rainy seasons in Yunnan. The starting date of the rainy seasons in Yunnan often comes later or normally in the year of EI-Nino. However, there is an obvious imperfect period in such influence, which in turn may mean that there is a certain fluctuation in the effect of ENSO on Asian summer monsoon.

Starting flow in a rotating parallel plate channel

The starting flow due to a suddenly applied pressure gradient in a parallel plate channel which is rotating as a system is studied. Exact analytic series solutions to the unsteady Navier-Stokes equations are found by both the Laplace transform method and the separation of parameters method, the latter is shown to be superior. Rotation not only induces a secondary transverse flow but also alters the character of the transient flow rate and velocity profiles. Back flow and inertial oscillations occur, especially at higher rota- tion rates.

Simulation study on starting of dual clutch transmission for tracked vehicles

In order to study the application of dual clutch transmission （DCT） on tracked vehicles, a simulation moclel and two control methods were performed for starting analysis. Based on a certain transmission of an existing tracked vehicle, a DCT structure was proposed. Matlab/Simulink was a dopted as a platform to develop the simulation model. The engine speed was controlled to follow the target speed as a launch strategy. Two control methods, a proportional integral derivative （ PID ） control method and a fuzzy control method, were proposed to control the engine throttle and oil pressure in order to track the target engine speed. Simulation results show that either the PID control or fuzzy control method can improve the starting performance compared with no loop control meth od. Fuzzy control method can lead a better starting quality compared with PID control method.

Starting Characteristics of Motor in Inverter-Motor Drive System

When the induction motor is fed from the PWM VSI inverter, with and without torque enhancing function, the variations of the starting torque and the starting current versus the starting frequency are analyzed, based on the steady state equivalent circuit of the induction motor.The corresponding expressions are derived, and the corresponding curves are also drawn, from which the initial starting frequency range can be determined properly and easily. The initial starting frequency range is the common range, in which the starting torque should be high enough and the starting current low enough.Some other useful formulas are also derived.These results are significant for electrical drive designers to make the starting schemes. The effects of the increase of the stator and the rotor resistances on the starting torque and the initial starting frequency range are also discussed, which is caused by the skin effects of the high order harmonics present in the PWM inverter output voltage.

Experimental study of the critical sand starting velocity of gas-watersand flow in an inclined pipe

The purpose of this paper is to study the critical sand starting velocity and transformation law of flow pattern based on gas-water-sand three-phase flow in an inclined pipe.Firstly,the indoor simulation experiment system of gas-water-sand three-phase flow was used to test the conversion law of flow pattern based upon the different gas void fraction.Secondly,the influence of slug bubbles on sand migration was investigated according to distinctive hole deviation angles,gas void fraction and sand concentration.Finally,the critical sand starting velocity was tested based on dissimilar hole deviation angles,gas void fraction,sand concentration and sand particle size,and then the influence of the abovementioned key parameters on the sand starting velocity was debated based on the force analysis of the sand particles.The experimental results illustrated that when the gas void fraction was less than 5%,it was bubbly flow.When it increased from 5%to 30%,the bubbly flow and slug flow coexisted.When it was between 30%and 50%,the slug flow and agitated flow coexisted.When it reached 50%,it was agitated flow.Providing that the hole deviation angle was 90°,the phenomenon of overall migration and wavelike migration on the surface of sand bed was observed.On the contrary,the phenomenon of rolling and jumping migration was recognized.The critical sand starting velocity was positively correlated with the hole deviation angle and sand particle size,but negatively associated with the gas void fraction and sand concentration.This research can provide a certain reference for sand-starting production in the field of petroleum engineering.

Dynamics simulation of the belt conveyor possessing feedback loop during starting

Synthesizing the mechanical models of the belt, the driver and the take-up device, the dynamics model was established on the longitudinal vibration of the overall belt conveyor system with finite elemental method, and S-function simulation block of asynchronous motor owing feedback function was built in Matlab/Simulink software, the simulation block indicates that motor rotation speed and its output moment vary with load and time, and the motor is a dynamic feedback system in working process. The state space block was adopted to express model of the belt. Thus it created simulation model of established dynamic model of overall belt conveyor system with Mat- lab/Simulink software, and simulates the course of starting by properly setting simulation parameters, and processes data for visualization.

Study on durability of Pt supported on graphitized carbon under simulated start-up/shut-down conditions for polymer electrolyte membrane fuel cells

The primary issue for the commercialization of proton exchange membrane fuel cell（PEMFC） is the carbon corrosion of support under start-up/shut-down conditions. In this study, we employ the nanostructured graphitized carbon induced by heat-treatment. The degree of graphitization starts to increase between 900 and 1300 ℃ as evidenced by the change of specific surface area, interlayer spacing, and ID/IG value. Pt nanoparticles are deposited on fresh carbon black（Pt/CB） and carbon heat-treated at 1700 ℃（Pt/HCB17） with similar particle size and distribution. Electrochemical characterization demonstrates that the Pt/HCB17 shows higher activity than the Pt/CB due to the inefficient microporous structure of amorphous carbon for the oxygen reduction reaction. An accelerating potential cycle between 1.0 and 1.5 V for the carbon corrosion is applied to examine durability at a single cell under the practical start-up/shutdown conditions. The Pt/HCB17 catalyst shows remarkable durability after 3000 potential cycles. The Pt/HCB17 catalyst exhibits a peak power density gain of 3%, while the Pt/CB catalyst shows 65% loss of the initial peak power density. As well, electrochemical surface area and mass activity of Pt/HCB17 catalyst are even more stable than those of the Pt/CB catalyst. Consequently, the high degree of graphitization is essential for the durability of fuel cells in practical start-up/shut-down conditions due to enhancing the strong interaction of Pt and π-bonds in graphitized carbon.

Analysis of Starting Performance of High PowerFactor Induction Motor with Floating Windingin Parallel Connection with Capacitors

In this paper, by using a matrix technique, a dynamic model of high power factor induction motor with floating winding in parallel connection with capacitors is established. Then, the starting performance of this motor is analyzed by computer simulation. By comparison of the tested and computed results, which are in good agreement, the dynamic model and simulative method are verified.

Starting of HPS lamps driven by electronic ballast

A complete research of two different starting techniques for HPS lamps driven by electronic ballast is presented while a traditional starting technique based on the series resonant theory which is used widely for fluorescent lamps starting is analyzed in detail. An improved nth harmonic resonant technique is also simulated. Furthermore, a novel starting technique based on a pulse transformer is proposed, which still offer the automatic switch off capability. The differences between two starting techniques are explained. The experimental results from a lab prototype are used to verify the design.

THE EVOLUTION OF STARTING VORTEX AND SECONDARY SEPARATION ON AN ELLIPTIC CYLINDER

Flow visualization was used to investigate experimentally the evolution process from symmetrical shedding to staggered shedding of the starting vortex and the phenomenon of secondary separation on an elliptic cylinder at moderate Reynolds numbers.The vortex structure of the flow separation was studied.The temporal variation of separation angle and length of wake vortex were given. The photographs and experimental results provided basis for further investigation of the complicated feature of the starting process of unsteady separated flows around an elliptic cylinder.

Transient Hydraulic Performance and Numerical Simulation of a Centrifugal Pump with an Open Impeller during Shutting Down

In this paper, the transient behavior of a low specific speed centrifugal pump with straight blades during shutting down is studied through the experimental test, theoretical calculation, and numerical simulation. The variations of the rota- tional speed, flow rate, and head with time are obtained in experiment. Based on the experimental results of the rota- tional speed and flow rate, the additional theoretical heads are quantitatively calculated and analyzed. The experimental results of the rotational speed and flow rate are worked as the boundary conditions to accurately accomplish the nu- merical simulation of the transient flow during shutting down. The experimental results show that the decrease history of the flow rate evidently lags behind that of the rotational speed, while the rotational speed slightly lags behind the head. Theoretical analysis shows that there exists a clear negative head impact phenomenon in the process of stopping. The transient behavior of the centrifugal pump with straight blades mainly comes from the rotation deceleration of im- peller, and has nothing to do with the fluid deceleration. The numerical simulations show that a large area backflow can be seen when the rotational speed decreases to zero due to the flowing inertia. In conclusion, the numerical simulation of the flow field is in good agreement with the internal flow theory of centrifugal pumps.

STUDY OF THE STARTING CURRENT AND FREQUENCY DEVIATION OF ELECTROSTATIC GYROMONOTRON

From relativistic linear Vlasov-Maxwell equations,the expressions of the startingcurrent and frequency deviation of a electrostatic gyromonotron with a field distribution sin k‖zare derived and the numerical calculation is carried out.

A Novel Part-Winding Starting Method for 4-Pole Squirrel Cage Induction Motor

the paper has been removed due to the authors' personal reason.

Effects of relaxation time on start-up time for starting flow of Maxwell fluid in a pipe

Although the analytical solution of the starting flow of Maxwell fluid in a pipe has been derived for a long time, the effect of relaxation time λ on start-up time ts of this flow is still not well understood. Especially, there exist a series of jumps on the ts-λ. curve. In this paper we introduce a normalized mechanical energy by mode decomposition and mathematical analogy to describe the start-up process. An improved definition of start-up time is presented based on the normalized mechanical energy. It is proved that the ts-λ. curve contains a series of jumps if λ is larger than a critical value. The exact positions of the jumps are determined and the physical reason of the jumps is discussed.

Application of the Probability Model for Starting Period to Initiate to Take Palivizumab by Prefecture Using National Official Sentinel Surveillance in Japan

Background: Palivizumab were used for the premature infant or a high-risk infant with congenital heart disease. However, recently outbreak pattern of respiratory syncytial (RS) virus infection has been varying year by year. Moreover, it also has some regional difference. Therefore, the object of the present study was to develop early detection of the timing of that outbreak had started in each prefecture. Method: We used data in National Official Sentinel Surveillance for Infectious Diseases (NOSSID). Study period was March 16th, 2011 to December 30th, 2018. We defined stating period to initiate to take palivizumab as 8 - 12 weeks before from the peak of outbreak. We estimated whether the week is included in starting period or not from April 1st to the peak of outbreak by the past number of patients of RS virus infection on week and its squared. Additionally, we have to take delay in NOSSID into consideration. Results: In nationwide, the last two seasons, the model predicted precisely the starting period. At prefectural level, the model predicted the starting period precisely in 16.6% of all year and prefectures pairs. When we consider the delay in NOSSID into consideration, the patients can start to take in 14.9% of all year and prefectures pairs. Discussion and Conclusion: The result of the probability model was not good, and thus we have to develop more sophisticated model for prediction at prefecture level.

Dose-response relationship of lung cancer to amount smoked, duration and age starting

AIM： To quantify smoking/lung cancer relationships accurately using parametric modelling.METHODS： Using the International Epidemiological Studies on Smoking and Lung Cancer database of all epidemiological studies of 100＋ lung cancer cases published before 2000, we analyzed 97 blocks of data for amount smoked, 35 for duration of smoking, and 27 for age started. Pseudo-numbers of cases and controls （or at risk） estimated from RRs by dose level formed the data modelled. We fitted various models relating loge RR to dose （d）, including βd, βdY and βloge （1 ＋ Wd）, and investigated goodness-of-fit and heterogeneity between studies.0.833 loge [1 ＋ （8.1c/10）] for cigarettes/d （c）, 0.792 （y/10）0.74 for years smoked （y） and 0.176 [（70 - a）/10]1.44 for age of start （a）. Each model fitted well overall, though some blocks misfitted. RRs rose from 3.86 to 22.31 between c = 10 and 50, from 2.21 to 13.54 be-tween y = 10 and 50, and from 3.66 to 8.94 between a = 30 and 12.5. Heterogeneity （P 〈 0.001） existed by continent for amount, RRs for 50 cigarettes/d being 7.23 （Asia）, 26.36 （North America） and 22.16 （Europe）. Little heterogeneity was seen for duration of smoking or age started.CONCLUSION： The models describe the dose-relation-ships well, though may be biased by factors including misclassification of smoking status and dose.

Research of Inorganic Heat Transfer Element Starting Proprerty

This article studies the wall temperature distribution of inorganic heat transfer element in different working conditions by experiments, and analyzes the impact of inclination angle, heating power, different kinds of cooling medium and different inlet temperature of cooling medium on the starting property of inorganic heat transfer element.