Analysis of the Application of Static Load Test in Bridge Bearing Capacity Testing

This article uses real engineering projects as examples to analyze how static load test technology is applied in testing the bridge-bearing capacity.The analysis covers aspects such as testing section layout,test load and efficiency coefficient,loading plan,evaluation optimization,test result modification,and result evaluation.The aim is to support the accurate detection and evaluation of bridge-bearing capacity.

Technical Analysis of Highway Bridge Static Load Test

Highway bridges are an important part of the transportation industry and can promote social economic construction and development.In actual operation,highway bridges are often damaged due to overload and natural factors,which tend to affect the safety and shorten the service life of these bridges.Assessing the overall state and performance of highway bridges is therefore a key element.Static load test,which is a type of sustainable detection experiment,has many advantages,including low cost,high efficiency,and high accuracy.In this paper,the bridge structure is analyzed through the application of theoretical calculations and relevant comparisons,so as to judge the operating state of the bridge.

Static Load Test Detection of Continuous Rigid- Frame Railway Bridge

The quality of the continuous rigid-frame railway bridge is related to the safety of train operation,so it is necessary to test its stiffness,strength,and other indicators.Static load test is a common technique for bridge inspection.This article summarizes the purpose of the static load test for a continuous rigid-frame railway bridge,including the required equipment,operation methods,etc.,and lists examples to analyze the operation process and precautions of static load test,hoping to provide reference information for relevant personnel.

Digital Simulation of Full Scale Static Test of Aircraft

Full scale aircraft static test is a very important process of aircraft design, it is costly and time consuming. The testing accuracy and validity mainly depend on the rationality of the test scheme design. When the aircraft is being tested, the specimen＇s safety mainly depends on monitoring and understanding the testing data by way of evaluating the coherence with the digital simulation data synchyononsly. The test digital simulation can aid realizing above requirements and improving the test efficiency significantly during test scheme design stage or testing stage respectively. The key technologies and the solving methods of test digital simulation are presented and the application example is given.

Mechanical properties and supporting effect of CRLD bolts under static pull test conditions

A device for supporting soft rock masses combined with a constant resistance structure characterized by constant resistance and large deformation at the end of a steel bar, known as the constant resistance and large deformation（CRLD） bolt, has recently been developed to counteract soft rock swelling that often occurs during deep mining. In order to further study the mechanical properties of the CRLD bolt, we investigated its mechanical properties by comparison with the conventional strength bolt（rebar） using static pull tests on many aspects, including supporting capacity, elongation, radial deformation, and energy absorption. The tests verified that the mechanical defects of the rebar, which include the decrease of bolt diameter, reduction of supporting capacity, and emergence and evolution of fracture until failure during the whole pull process, were caused by the Poisson＇s ratio effect. Due to the special structure set on the CRLD bolt, the bolt presents a seemingly unusual phenomenon of the negative Poisson＇s ratio effect, i.e., the diameter of the constant resistance structure increases while under-pulling. It is the very effect that ensures the extraordinary mechanical properties, including high resistance, large elongation, and strong energy absorption. According to the comparison and analysis of numerical simulation and field test, we can conclude that the CRLD bolt works better than the rebar bolt.

Static load test and load transfer mechanism study of squeezed branch and plate pile in collapsible loess foundation

As a special geological phenomenon, the character of collapsible loess foundation is collapsible when penetrated by water. This character leads to the soil losing load bearing capacity largely and may lead to foundation failure. Pile is a popular foundation used in collapsible loess. The squeezed branch and plate pile is a new type of pile developed in recent years and has not be used in a project before. In this paper three squeezed branch and plate piles are tested in collapsible loess after immersion processing. The results may be used for reference in similar construction project, and to provide theoretical references for de- signing of the squeezed branch and plate piles in engineering practice.

Structural damage identification using test static data based on grey system theory

A new structural damage identification method using limited test static displacement based on grey system theory is proposed in this paper. The grey relation coefficient of displacement curvature is defined and used to locate damage in the structure, and an iterative estimation scheme for solving nonlinear optimization programming problems based on the quadratic programming technique is used to identify the damage magnitude. A numerical example of a cantilever beam with single or multiple damages is used to examine the capability of the proposed grey-theory-based method to localize and identify damages. The factors of meas-urement noise and incomplete test data are also discussed. The numerical results showed that the damage in the structure can be localized correctly through using the grey-related coefficient of displacement curvature, and the damage magnitude can be iden-tified with a high degree of accuracy, regardless of the number of measured displacement nodes. This proposed method only requires limited static test data, which is easily available in practice, and has wide applications in structural damage detection.

Application of bi-directional static loading test to deep foundations

Bi-directional static loading test adopting load cells is widely used around the world at present, with increase in diameter and length of deep foundations. In this paper, a new simple conversion method to predict the equivalent pile head load-settlement curve considering elastic shortening of deep foundation was put forward according to the load transfer mechanism. The proposed conversion method was applied to root caisson foundation in a bridge and to large diameter pipe piles in a sea wind power plant. Some new load cells, test procedure, and construction technology were adopted based on the applications to different deep foundations, which could enlarge the application scopes of bi-directional loading test. A new type of bi-directional loading test for pipe pile was conducted, in which the load cell was installed and loaded after the pipe pile with special connector has been set up. Unlike the conventional bi-directional loading test, the load cell can be reused and shows an evident economic benefit.

Research on Dynamic and Static Test Methods for Evaluating the Poisson's Ratio of Orien ted Strand Board

In this article,dynamic method and static method of testing Poisson's ratio of OSB(Oriented Strand Board)were proposed.Through modal and static numerical analyses,the position where the transverse stress is equal to zero was determined.The binary linear regression method was applied to express the gluing position of the strain gauge as a relational express ion that depended on the length-width ratio and width-thickness ratio of the canti-lever plate.Then the longitudinal and transverse Poisson's ratios of OSB were mea sured by the given dynamic and static methods.In addition,the test results of OSB Poisson's ratio were analyzed with the probability distribution of random variables.The results showed that using the proposed dynamic method and static method,the test results for longitudinal and transverse Poisson's ratios of OSB were quite consistent,despite the gluing position of the strain gauges being different.And these OSB Poisson's ratios were accorded with that obtained by the axial tensile method and the four-point bending method.OSB longitudinal and transverse Poisson's ratios followed Weibull distribution.

Seismic performance evaluation of an infilled rocking wall frame structure through quasi-static cyclic testing

Earthquake investigations have illustrated that even code-compliant reinforced concrete frames may suffer from soft-story mechanism.This damage mode results in poor ductility and limited energy dissipation.Continuous components offer alternatives that may avoid such failures.A novel infilled rocking wall frame system is proposed that takes advantage of continuous component and rocking characteristics.Previous studies have investigated similar systems that combine a reinforced concrete frame and a wall with rocking behavior used.However,a large-scale experimental study of a reinforced concrete frame combined with a rocking wall has not been reported.In this study,a seismic performance evaluation of the newly proposed infilled rocking wall frame structure was conducted through quasi-static cyclic testing.Critical joints were designed and verified.Numerical models were established and calibrated to estimate frame shear forces.The results evaluation demonstrate that an infilled rocking wall frame can effectively avoid soft-story mechanisms.Capacity and initial stiffness are greatly improved and self-centering behavior is achieved with the help of the infilled rocking wall.Drift distribution becomes more uniform with height.Concrete cracks and damage occurs in desired areas.The infilled rocking wall frame offers a promising approach to achieving seismic resilience.

Fuzzy Model Free Adaptive Control for Rotor Blade Full-Scale Static Testing

To eliminate the node traction coupling during wind turbine blade full-scale static testing,a model free adaptive control algorithm is presented based on fuzzy control performance function compensation. Based on the universal model theory,the fuzzy model free adaptive control( FMFAC) algorithm is designed by configuring the spot static testing experiences as compensation function F( ·). Then the algorithm implementation process is provided and its quick convergence is proved. Using software to establish static load coupling model of multi-nodes,simulate and verify the validity of FMFAC algorithm,which is applied to wind turbines blade full-scale static testing. The results show that the adaptive decoupling ability of FMFAC is better. The traction of four load points can stay steady and change coordinately. Process error is not over ± 6 k N. The error rate is lower than 1% in special phase.This algorithm effectively eliminates the traction coupling of the static testing process,and makes wind turbine blade testing steadily.

单跨两层含减震外挂墙板装配式混凝土框架拟静力试验研究

该文在对一个含减震外挂墙板平面框架(简称减震结构)以及一个作为对比的纯框架(简称抗震结构)进行混合试验的基础上,进一步对其单跨2层试验子结构进行了拟静力试验,研究了两结构在水平地震作用下的受力过程、损伤模式及减震外挂墙板对主体结构抗震性能的影响。研究结果表明:减震结构和抗震结构的破坏机制均为梁端和柱底出现塑性铰的梁铰机制,减震外挂墙板未改变主体结构的破坏模式;减震结构中,在最大层间位移角达到1/55之前,消能器呈预期的履带式滚动变形,此后由于外挂墙板的面内转动变形,消能器水平剪切变形值增加不大,且圆弧段产生明显变形;试验过程中减震外挂墙板未出现裂缝;墙板与框架间上部线连接处裂缝宽度较小,连接钢筋应变也较小,表明连接可靠;两试件均具有较好的变形能力和耗能能力;在相同位移级别下,减震结构的刚度、极限承载力和耗能能力均更好。

钢支撑-钢筋混凝土掉层框架结构抗震性能试验研究

为改善坡地钢筋混凝土(RC)掉层框架结构抗侧刚度分布的不均匀性,设计了一栋在上接地层设置钢支撑的RC掉层框架结构,按1/4比例提取其顺坡向中榀框架下部5层子结构为试验对象,开展钢支撑-RC掉层框架拟静力试验,观测试件的破坏过程,并对比RC掉层框架试验所得试件的破坏形态,分析试件滞回性能、延性和刚度退化等抗震性能指标。结果表明:试件的最终破坏是以第4层柱底混凝土压溃,梁端混凝土剥落、底部钢筋断裂,顶层柱顶混凝土剥落为标志。与RC掉层框架试验结果相比,钢支撑-RC掉层框架试件上接地柱的破坏明显减轻,柱端破坏分布也更为均匀,避免了掉层框架结构“半层破坏模式”的出现,改善了结构的耗能和抗地震倒塌能力。但试件上接地层相邻上一层的变形和破坏程度较大,应对该楼层的柱端进行适当的抗震加强;设置钢支撑后,试件的滞回曲线较为饱满,并具有良好的延性(正、负向加载的位移延性系数分别可达5.13、5.69),正负向加载的刚度退化曲线也趋于对称。

非对称集中荷载下无腹筋RC梁受剪性能试验研究

非对称集中荷载作用下钢筋混凝土无腹筋简支梁具有两个不同的剪跨比,而两剪跨段受剪承载力与剪力作用之间的相对大小存在不确定性.通过开展6根非对称和4根对称集中荷载作用下钢筋混凝土无腹筋简支梁受剪性能试验研究,获取了破坏形态、荷载-跨中位移曲线和纵向受拉钢筋应变,并分析了《混凝土结构设计规范》(GB 50010—2010)公式、修正压力场理论、基于截面应变分析的抗剪模型和Zsutty统计公式的适用性.结果表明,对于小剪跨比恒为1.0的无腹筋简支梁,大剪跨比为2.0~4.0的梁均在大剪跨段发生剪切破坏;当大剪跨比由3.0增大至3.5时,梁的极限承载力出现由大剪跨段控制转变为小剪跨段控制的现象《.混凝土结构设计规范》(GB50010—2010)预测非对称集中荷载作用下钢筋混凝土无腹筋简支梁发生剪切破坏的位置与试验结果相反,而Zsutty统计公式的预测效果最好.

预制拼装铁路重力式桥墩的抗震性能研究

为适应中国铁路建设向高烈度震区快速发展的需要,解决传统预制拼装桥墩墩柱及承台连接位置薄弱等问题,提出一种灌浆波纹管连接的模块化预制拼装桥墩体系,通过设置承台与墩身塑性区域共同浇筑及墩底局部无黏结段增强桥墩的抗震性能。制作1个局部无黏结整体现浇铁路重力式桥墩模型和1个局部无黏结预制拼装铁路重力式桥墩模型开展拟静力试验,并结合有限元分析,进行预制拼装铁路重力式桥墩抗震性能研究。结果表明:局部无黏结预制拼装桥墩整体连接性能稳定,可通过墩底塑性区域破坏与墩身及节段间的摇摆实现共同消能,其破坏模式表现为墩底塑性区域的弯曲破坏,未发生破坏位置转移现象;局部无黏结预制拼装桥墩等效塑性区域高度比整体现浇桥墩降低,抗侧向水平承载力与耗能能力提升显著,位移延性能力良好,可适应更大加载位移,最终累积耗能增长64.3%;结构接缝位置连接稳定可靠,同等加载位移下等效刚度基本一致,抗震性能得到明显提高;预制节段划分对预制拼装铁路重力式桥墩抗震性能的影响不大。

不同螺栓等级下共享铁塔挂载连接件承载性能研究

为研究螺栓等级对挂载连接件承载性能的影响,选取了4.8级普通螺栓(KL-4.8)与8.8级摩擦型高强螺栓(KL-8.8)连接的挂载连接件进行静力试验研究。采用ABAQUS有限元分析软件对其受力性能进行模拟,使用可靠的数值模型系统分析螺栓等级和螺栓直径对连接件承载性能的影响。结果表明:在水平荷载作用下,两种不同螺栓等级连接的挂载连接件节点处均未出现滑移;两种连接件的破坏模式基本一致,左右两侧方钢管底部及右侧方钢管顶部均出现断裂;KL-8.8的整体刚度、极限承载能力以及变形能力均高于KL-4.8;当采用4.8级普通螺栓连接且承载力低于74.13 kN时,螺栓直径不宜小于18 mm,否则螺栓杆会发生剪切变形;当采用8.8级和10.9级高强螺栓连接时,双板件连接处节点偏于刚性连接,挂载连接件的整体刚度和极限荷载主要取决于方刚管、挂载铁杆等其他部件;挂载连接件在承载过程中通过双板件与主材之间的摩擦力和螺栓抗剪来抵抗外载,实际工程中应根据挂载重量合理选择螺栓参数。

部分充填式窄幅钢箱-UHPC组合梁抗剪试验研究

目的为研究部分充填式窄幅钢箱-UHPC组合梁的抗剪性能,方法对4根倒置组合梁试件通过三点加载方式进行了静载试验,通过研究其负弯矩作用下的破坏形态及变形特征,得到了组合梁的荷载-挠度曲线、应变分布、荷载-滑移曲线、最终破坏形态等。结果试验研究结果表明:UHPC翼板显著提升了组合梁的变形能力和极限承载力;相较于试件SUCB-3(NC翼板),试件SUCB-1(1/2UHPC翼板和SUCB-4(全UHPC翼板))的承载力分别提高了18.2%和27.3%,变形能力则分别增强了38.02%和41.2%;钢纤维的添加能有效地抑制翼板裂缝的开展,钢纤维掺量从0提高到2%,试件的最大裂缝宽度从1.06 mm降低到0.92 mm,变形能力增强了23.61%,承载力则提高了4%。结论提出了考虑钢箱、UHPC翼板和充填混凝土贡献的组合梁抗剪承载力计算公式。

新型钢管混凝土梁柱节点力学性能试验研究

为研究内加强环式圆钢管混凝土柱与矩形钢管混凝土梁这种新型连接节点的力学性能,设计了缩尺钢管混凝土梁柱节点试件,开展了相同梁柱节点试件的静力加载试验和低周往复加载试验。通过研究该节点试件的破坏模式、荷载-位移曲线以及拟静力加载试验的骨架曲线、核心区剪切变形等,分析了节点试件的承载能力、延性和耗能能力,全面考察了同一梁柱节点在静力加载和低周往复加载两种工况下的受力性能和破坏模式。结果表明:钢管混凝土梁柱节点试件核心区强度较强,破坏模式主要为梁端破坏,低周往复加载试验时试件梁柱连接处附近的梁端钢板发生拉裂破坏和钢板鼓曲,静力加载试验时试件梁端焊缝发生拉裂破坏;试件延性较好,加载过程中经历了弹性、弹塑性和塑性发展阶段。最后提出了该类钢管混凝土梁柱节点核心区的抗剪强度计算公式。

中空夹层钢管钢渣混凝土T形节点抗震性能研究

将钢渣混凝土灌入中空夹层钢管混凝土结构,充分利用钢渣混凝土的微膨胀性和中空夹层内外钢管对混凝土的约束作用,有效解决了钢渣混凝土工程应用中的安定性问题。以混凝土类型、空心率、支主管直径比和轴压比为参数变量,共进行了5个中空夹层钢管混凝土T形节点试件(1个普通混凝土试件、4个钢渣混凝土试件)拟静力试验研究。试验结果表明:与灌注普通混凝土相比,灌注钢渣混凝土对试件节点承载力影响不大,但位移延性和耗能能力明显增加,提高幅度分别达69.46%和48.20%;当空心率从0.3增大到0.5时,试件位移延性系数提高9.69%;当支主管直径比从0.40增大到0.68时,位移延性系数提高82.44%;当轴压比从0.1增大到0.2时,试件位移延性系数降低17.98%。建立有限元模型对试件的滞回性能进行了模拟,模拟结果与试验结果基本符合,验证了所建有限元模型的有效性。进而开展了节点承载力影响参数分析,得到最佳空心率为70%左右。钢渣在钢管混凝土结构中应用,可大幅提高其抗震性能。

新型桥梁“耗能-限位”一体化弧形板装置力学性能试验及参数敏感性分析

为解决强震作用下中小跨径简支梁桥的落梁问题,研发了一种经济高效、安装便捷的新型“耗能限位”梁一体化弧形板装置.首先采用拟静力试验研究了不同截面的弧形板装置滞回耗能行为和疲劳破坏机理,接着采用数值分析的手段探讨了参数对装置力位移骨架曲线及等效阻尼比的影响规律,并补充了弧形板装置的防落梁行为模式与极限承载能力.结果表明:提出的新型弧形板装置具有优异的耗能能力,T形截面的弧形板结构更加合理,等效阻尼比最大能达到近40%;弧形板装置可通过分离几何参数对耗能能力、滞回强度、刚度及位移能力进行设计,增大中间截面的腹板高度h2是提高弧形板耗能能力的最有效手段,增加50%的h2能提高50.1%的最大强度与约4.7%的等效阻尼比.所提出的新型防落梁装置为桥梁中小震消能和强震柔性防落梁提供一体化装置解决方案.