Effects of gradient high-field static magnetic fields on diabetic mice

Although 9.4 T magnetic resonance imaging(MRI) has been tested in healthy volunteers,its safety in diabetic patients is unclear.Furthermore,the effects of high static magnetic fields(SMFs),especially gradient vs.uniform fields,have not been investigated in diabetics.Here,we investigated the consequences of exposure to 1.0-9.4 T high SMFs of different gradients(>10 T/m vs.0-10 T/m)on type 1 diabetic(T1D) and type 2 diabetic(T2D) mice.We found that 14 h of prolonged treatment of gradient(as high as 55.5 T/m) high SMFs(1.0-8.6 T) had negative effects on T1D and T2D mice,including spleen,hepatic,and renal tissue impairment and elevated glycosylated serum protein,blood glucose,inflammation,and anxiety,while 9.4 T quasi-uniform SMFs at 0-10 T/m did not induce the same effects.In regular T1D mice(blood glucose>16.7 mmol/L),the>10 T/m gradient high SMFs increased malondialdehyde(P<0.01) and decreased superoxide dismutase(P<0.05).However,in the severe T1D mice(blood glucose≥30.0 mmol/L),the>10 T/m gradient high SMFs significantly increased tissue damage and reduced survival rate.In vitro cellular studies showed that gradient high SMFs increased cellular reactive oxygen species and apoptosis and reduced MS-1 cell number and proliferation.Therefore,this study showed that prolonged exposure to high-field(1.0-8.6 T)>10 T/m gradient SMFs(35-1 380 times higher than that of current clinical MRI)can have negative effects on diabetic mice,especially mice with severe T1D,whereas 9.4 T high SMFs at 0-10T/m did not produce the same effects,providing important information for the future development and clinical application of SMFs,especially high-field MRI.

Design Optimization for Generating a High Static Magnetic Field

This paper details the creation of a device capable of generating a powerful and consistent static magnetic field. This apparatus serves the purpose of quantifying the magnetostrictive strain found in materials like annealed cobalt ferrite and Terfenol-D, specifically those shaped as cylindrical rods. In our investigation, the use of static magnetic fields proves most advantageous. This choice is made to mitigate the generation of eddy currents, which would inevitably occur if the magnetic field intensity were varied. The fundamental idea behind this design involves employing a C-shaped iron core constructed from low-carbon mild steel. On this core, three coils are mounted, each capable of producing one-third of the required 9000 Oersted (Oe) magnetic field strength. The test specimen is situated within the “jaws” of the C-shaped core, thus completing the magnetic circuit. To manage the heat generated by each coil, a cooling system consisting of copper tubes is employed. These tubes facilitate the flow of air to dissipate the heat. To model and predict the magnetic field strength produced by the coils, finite element analysis (FEMM) software is utilized, and the results align closely with the anticipated outcomes. This design effectively generates a robust and unchanging magnetic field measuring a stable 9000 Oe in total. Consequently, this equipment finds utility in characterizing the magnetic properties of specific materials.

Direct Generation of Intense Compression Waves in Molten Metals by Using a High Static Magnetic Field and Their Application

Compression waves propagating through molten metals are contributed to degassing, accelerating reaction rate,removing exclusions from molten metals and refining solidification structures during metallurgical processing of materials. In the present study, two electromagnetic methods are proposed to generate intense compression wavesdirectly in liquid metals. One is the simultaneous imposition of a high frequency electrical current field and a staticmagnetic field; the other is that of a high frequency magnetic field and a static magnetic field. A mathematical modelbased on compressible fluid dynamics and electromagnetic fields theory has been developed to derive pressure distributions of the generated waves in a metal. It shows that the intensity of compression waves is proportional to thatof the high frequency electromagnetic force. And the frequency is the same as that of the imposed electromagneticforce. On the basis of theoretical analyses, pressure change in liquid gallium was examined by a pressure transducerunder various conditions. The observed results approximately agreed with the predictions derived from the theoreticalanalyses and calculations. Moreover, the effect of the generated waves on improvement of solidification structureswas also examined. It shows that the generated compression waves can refine solidification structures when they wereapplied to solidification process of Sn-Pb alloy. This study indicates a new method to generate compression wavesby imposing high frequency electromagnetic force locally on molten metals and this kind of compression waves canprobably overcome the difficulties when waves are excited by mechanical vibration in high temperature environments.

Effects of 13 T Static Magnetic Fields (SMF) in the Cell Cycle Distribution and Cell Viability in Immortalized Hamster Cells and Human Primary Fibroblasts Cells

Magnetic resonance image （MRI） systems with a much higher magnetic flux density were developed and applied for potential use in medical diagnostic. Recently, much attention has been paid to the biological effects of static, strong magnetic fields （SMF）. With the 13 T SMF facility in the Institute of Plasma Physics, Chinese Academy of Sciences, the present study focused on the cellular effects of the SMF with 13 T on the cell viability and the cell cycle distribution in immortalized hamster cells, such as human-hamster hybrid （AL） cells, Chinese hamster ovary （CHO） cells, DNA double-strand break repair deficient mutant （XRS-5） cells, and human primary skin fibroblasts （AG1522） cells. It was found that the exposure of 13 T SMF had less effect on the colony formation in either nonsynchronized or synchronized AL cells. Moreover, as compared to non-exposed groups, there were slight differences in the cell cycle distribution no matter in either synchronized or nonsynchronized immortalized hamster ceils after exposure to 13 T SMF. However, it should be noted that the percentage of exposed AG1522 cells at G0/G1 phase was decreased by 10% as compared to the controls. Our data indicated that although 13 T SMF had minimal effects in immortalized hamster cells, the cell cycle distribution was slightly modified by SMF in human primary fibroblasts.

The effects of a static magnetic field on the microwave absorption of hydrogen plasma in carbon nanotubes: a numerical study

We theoretically investigate the microwave absorption properties of hydrogen plasma in iron-catalyzed high- pressure disproportionation-grown carbon nanotubes under an external static magnetic field in the frequency range 0.3 GHz to 30 GHz, using the Maxwell equations in conjunction with a general expression for the effective complex permittivity of magnetized plasma known as the Appleton Hartree formula. The effects of the external static magnetic field intensity and the incident microwave propagation direction on the microwave absorption of hydrogen plasma in CNTs are studied in detail. The numerical results indicate that the microwave absorption properties of hydrogen plasma in iron-catalyzed high-pressure disproportionation-grown carbon nanotubes can be obviously improved when the exter- nal static magnetic field is applied to the material. It is found that the specified frequency microwave can be strongly absorbed by the hydrogen plasma in iron-catalyzed high-pressure disproportionation-grown carbon nanotubes over a wide range of incidence angles by adjusting the external magnetic field intensity and the parameters of the hydrogen plasma.

Nonlinear Resonance of the Rotating Circular Plate under Static Loads in Magnetic Field

The rotating circular plate is widely used in mechanical engineering, meanwhile the plates are often in the electromagnetic field in modern industry with complex loads. In order to study the resonance of a rotating circular plate under static loads in magnetic field, the nonlinear vibration equation about the spinning circular plate is derived according to Hamilton principle. The algebraic expression of the initial deflection and the magneto elastic forced disturbance differential equation are obtained through the application of Galerkin integral method. By mean of modified Multiple scale method, the strongly nonlinear amplitude-frequency response equation in steady state is established. The amplitude frequency characteristic curve and the relationship curve of amplitude changing with the static loads and the excitation force of the plate are obtained according to the numerical calculation. The influence of magnetic induction intensity, the speed of rotation and the static loads on the amplitude and the nonlinear characteristics of the spinning plate are analyzed. The proposed research provides the theory reference for the research of nonlinear resonance of rotating plates in engineering.

Rapid air film continuous casting of aluminum alloy using static magnetic field

The influences of the cooling style and static magnetic field on the air film casting process were investigated. Ingots of 6063 aluminum alloy were produced by AIRSOL VEIL casting with double-layer cooling water and static magnetic field. Surface segregation, hot crack and variation of solute content along the radius direction of ingot were examined. The results showed that double-layer cooling water can improve the surface quality and avoid of hot crack, which created conditions to increase the casting speed. The electromagnetic casting process can effectively improve the surface quality in high speed casting process, and static magnetic field has a great influence on solute distribution along the radius direction of ingot.

Genotoxic Effects of Superconducting Static Magnetic Fields(SMFs)on Wheat(Triticum aestivum)Pollen Mother Cells(PMCs)

The effects of superconducting static magnetic fields （SMFs） on the pollen mother cells （PMCs） of wheat were investigated in order to evaluate the possible genotoxic effect of such non-ionizing radiation. The seeds of wheat were exposed to static magnetic fields with either different magnetic flux densities （0, 1, 3, 5 and 7 Tesla） for 5 h or different durations （1, 3 and 5 h） at a magnetic flux density of 7 Tesla. The seeds were germinated at 23℃ after exposure and the seedlings were transplanted into the field. The PMCs from young wheat ears were taken and slides were made following the conventional method. The genotoxic effect was evaluated in terms of micronucleus （MN）, chromosomal bridge, lagging chromosome and fragments in PMCs. Although the exposed groups of a low field intensity （below 5 Tesla） showed no statistically significant difference in the aberration frequency compared with the unexposed control groups and sham exposed groups, a significant increase in the chromosomal bridge, lagging chromosome, triple-polar segregation or micronucleus was observed at a field strength of 5 Tesla or 7 Tesla, respectively. The analysis of dose-effect relationships indicated that the increased frequency of meiotic abnormal cells correlated with the flux density of the magnetic field and duration, but no linear relationship was observed. Such statistically significant differences indicated a potential genotoxic effect of high static magnetic fields above 5 T.

Experimental study of repair effects of moderate-intensity static magnetic fields on type 2 diabetic soft tissue wound healing

Objective: To systematically explore the effects of moderate-intensity static magnetic fields (SMF) on type 2 diabetic wound healing and preliminarily explore the possible mechanism, and hence to lay a foundation for its scientific and extensive clinical application. Methods:Round-shape wound of soft tissues with 1-cm diameter was constructed on the dorsum of thirty-two 3-month-old male type 2 diabetic db/db mice and sixteen wild-type mice with the same gene background, followed by covered with transparent film wound dressing. The experiment was divided into the control group (control), db/db mice group (db/db), and db/db mice exposed to SMF group (db/db+SMF) with sixteen mice in each group. Four mice in each group were killed post 5, 12 and 19 days of the wound model establishment, respectively. The mice in the db/db+SMF group were subjected to systemic SMF exposure (4 mT peak intensity) with 2 h per day. The wound closure rate, overall wound healing period, tensile strength, and histopathological morphology in each group were determined and analyzed. The interleukin-1β (IL-1β), tumor necrosis factor-α (TNF-α), interleukin-6 (IL-6) and vascular endothelial growth factor (VEGF) gene expression were also measured and analyzed. Results: SMF significantly increased the wound closure rate (P<0.05), decreased the overall healing period (P<0.05), increased the tensile strength of wound tissues (P<0.05), decreased the number of inflammatory cells, and inhibited the expression of inflammatory cytokines (IL-1β, TNF-αand IL-6) in db/db mice at 5, 12 and 19 days post-surgery (P<0.05), whereas SMF had no significant effect on the VEGF expression. Conclusion: Moderate-intensity systemic SMF exposure exhibits positive therapeutic effects on accelerating type 2 diabetic soft tissue wound repair, and the positive effects are closely related to its significant anti-inflammatory response.

A Simulation Study on the Specific Loss Power in Magnetic Hyperthermia in the Presence of a Static Magnetic Field

Our purpose in this study was to present a method for estimating the specific loss power (SLP) in magnetic hyperthermia in the presence of an external static magnetic field (SMF) and to investigate the SLP values estimated by this method under various diameters (D) of magnetic nanoparticles (MNPs) and amplitudes (H0) and frequencies (f) of an alternating magnetic field (AMF). In our method, the SLP was calculated by solving the magnetization relaxation equation of Shliomis numerically, in which the magnetic field strength at time t (H(t)) was assumed to be given by , with Hs being the strength of the SMF. We also investigated the SLP values in the case when the SMF with a field-free point (FFP) generated by two solenoid coils was used. The SLP value in the quasi steady state (SLPqss) decreased with increasing Hs. The plot of the SLPqss values against the position from the FFP became narrow as the gradient strength of the SMF (Gs) increased. Conversely, it became broad as Gs decreased. These results suggest that the temperature rise and the area of local heating in magnetic hyperthermia can be controlled by varying the Hs and Gs values, respectively. In conclusion, our method will be useful for estimating the SLP in the presence of both the AMF and SMF and for designing an effective local heating system for magnetic hyperthermia in order to reduce the risk of overheating surrounding healthy tissues.

Acetaminophen overdose-induced acute liver injury can be alleviated by static magnetic field

Acetaminophen(APAP),the most frequently used mild analgesic and antipyretic drug worldwide,is implicated in causing 46%of all acute liver failures in the USA and between 40%and 70%in Europe.The predominant pharmacological intervention approved for mitigating such overdose is the antioxidant N-acetylcysteine(NAC);however,its efficacy is limited in cases of advanced liver injury or when administered at a late stage.In the current study,we discovered that treatment with a moderate intensity static magnetic field(SMF)notably reduced the mortality rate in mice subjected to high-dose APAP from 40%to 0%,proving effective at both the initial liver injury stage and the subsequent recovery stage.During the early phase of liver injury,SMF markedly reduced APAPinduced oxidative stress,free radicals,and liver damage,resulting in a reduction in multiple oxidative stress markers and an increase in the antioxidant glutathione(GSH).During the later stage of liver recovery,application of vertically downward SMF increased DNA synthesis and hepatocyte proliferation.Moreover,the combination of NAC and SMF significantly mitigated liver damage induced by high-dose APAP and increased liver recovery,even 24 h post overdose,when the effectiveness of NAC alone substantially declines.Overall,this study provides a noninvasive non-pharmaceutical tool that offers dual benefits in the injury and repair stages following APAP overdose.Of note,this tool can work as an alternative to or in combination with NAC to prevent or minimize liver damage induced by APAP,and potentially other toxic overdoses.

Numerical Simulation of Level Magnetic Field

According to Maxwell electromagnetic field theory and magnetic vector potential integral equation,a mathematical model of LMF(Level Magnetic Field)for EMBR(Electromagnetic brake)was proposed,and the reliable software for LMF calculation was developed.The distribution of magnetic flux density given by numerical simulation shows that the magnetic flux density is greater in the magnet and magnetic leakage is observed in the gap.The magnetic flux density is uniform in horizontal plane and a peak is observed in vertical plane.Furthermore,the effects of electromagnetic and structural parameters on magnetic flux density were discussed.The relationship between magnetic flux,electromagnetic parameters and structural parameters is obtained by dimensional analysis,simulation experiment and least square method.

Effects of 3.7 T-24.5 T high magnetic fields on tumor-bearing mice

Since high magnetic field（MF） intensity can improve the image quality and reduce magnetic resonance imaging（MRI） acquisition time, the field intensity of MRIs has continued to increase over the past few decades. Although MRIs in most current hospitals are 0.5 T–3 T, there are preclinical studies have been carried out using 9.4 T MRI, and engineers are also putting efforts on building MRIs with even higher MFs. However, the accompanied safety issue of high-field MRIs is an emergent question to address before their clinical applications. In the meantime, the static magnetic field（SMF） has been shown to inhibit tumor growth in previous studies. Here, we investigated both the safety issue and the anti-tumor potentials of 3.7 T–24.5 T SMFs on GIST-T1 gastrointestinal stromal tumor-bearing nude mice. We followed up the mice three weeks after their exposure to high SMF and found that none of the mice died or had severe organ damage, except for slightly decreased food intake, weight gain, and liver function. Moreover, the tumor growth was inhibited by 3.7 T–24.5 T SMFs（up to ～54%）. It is interesting that the effects are more dependent on MF gradient than intensities, and for the same gradient and intensity, mice responded differently to hypogravity and hypergravity conditions. Therefore, our study not only demonstrated the safeness of high SMFs up to 24.5 T on mice but also revealed their anti-tumor potentials in the future.

Experiment on low-frequency electromagnetic waves propagating in shock-tube-generated magnetized cylindrical enveloping plasma

We propose a method of applying a static magnetic field to reduce the attenuation of the magnetic field component(SH) of low-frequency electromagnetic(LF EM) waves in dense plasma. The principle of this method is to apply a static magnetic field to limit electron movement, thereby increasing the equivalent resistance and thus reducing the induced current and SH. We consider the static magnetic field acting on the plasma of the entire induced current loop rather than on the local plasma, where the induced current is excited by the magnetic field component of LF EM waves. Analytical expressions of SH suitable for magnetized cylindrical enveloping plasma are derived by adopting an equivalent circuit approach, by which SHis calculated with respect to various plasma parameter settings. The results show that SH can be reduced under a static magnetic field and the maximum magnetic field strength that mitigates blackout is less than 0.1 T. Experiments in which LF EM waves propagate in a shock-tubegenerated magnetized cylindrical enveloping plasma are also conducted. SH measured under the magnetic field(the magnetic field strength B0 acting on the magnetic field probe was about0.06 T) reduces at f=10 MHz and f=30 MHz when ne≈1.9×1013 cm-3, which is consistent with theoretical results. The verification of the theory thus suggests that applying a static magnetic field with a weak magnetic field has the potential to improve the transmission capacity of LF EM waves in dense plasma.

Research Progress on Slag Resistance of Refractories with Electromagnetic Field

As the essential material for high temperature industrial production and technological development such as metallurgy,refractory has an important influence on the safety and efficiency of production for high-quality steels.Slag corrosion is one of the main reasons causing the wear of refractories.The slag resistance of refractories can be enhanced by regulation and control of the composition and structure,while applying the external electromagnetic field can achieve the good performance.Electromagnetic field can not only change the thermo physical properties of slags,but also have a significant effect on the slag resistance of refractories.Suitable electric field can slow down the slag corrosion while the influence of conductivity of refractories is obvious;The magnetic field with millitesla level have a significant impact on the high temperature properties of the slags,and the alternating magnetic field can accelerate the slag corrosion of the refractories,while the static magnetic field has a promising potential to improve the slag resistance of the refractories.Furthermore,the interaction mechanism between refractories and slags under magnetic field needs to be clarified in order to develop the magnetic resistance against slag corrosion of refractories.

Elaboration and Magnetic Properties of Cobalt-Palladium Magnetic Nanowires Encapsulated in Carbon Nanotubes

Bimetallic one-dimensional (1-D) cobalt-palladium magnetic nanowires encapsuled by carbon nanotubes were synthesized on silicon substrate using plasma enhanced chemical vapor deposition technique. After the deposition of the catalyst, the growth of nanotubes takes place in two stages. The first is a thermal pretreatment to transform continuous nanometer bimetallic thick film into isolated and uniformly distributed nanoparticles over the entire surface of the substrate. The second step results in the growth of nanotubes perpendicular to the substrate by the addition of carbon atoms on the insulated metal nanoparticles. While growing the nanotubes at given thermochemical conditions, a Co-Pd eutectic is thought to diffuse inside the cavity of the nanotube along a length of few hundreds of nanometers as determined by high resolution, spatially resolved Electron Energy Loss Spectroscopy (EELS), and energy filtered elemental mapping. The magnetic anisotropy along the nanotube directions is observed. Ferromagnetic or superparamagnetic-like behavior of the filled nanotubes was measured through local magneto-optical Kerr effect or global superconducting quantum interference device measurements, respectively. Information on the magnetism of filled nanotubes at different scales is pointed out and discussed.

Reaction characteristics of carbon-bearing pellets of Bayan Obo lean iron ores in a static magnetic field

The use of low-grade,refractory and composite paragenetic mineral resources is necessary for overcoming the shortage of iron ore resources in China.As a solution to the treatment of such iron ores,the direct reduction of carbon-bearing pellets can ensure complete iron removal and the effective enrichment of other high-value elements.Thus,this technology enjoys a broad application prospect.However,there are several problems with low-temperature reduction,such as low iron ore reaction efficiency,long reaction time,and high energy consumption.To improve the low-temperature carbothermic reduction efficiency of iron ores,a static magnetic field with magnetic induction intensity of 1.0 T was introduced.An isothermal reduction experiment was conducted at 1223 K to study the low-temperature self-reduction characteristics of carbon-bearing pellets of Bayan Obo lean iron ores in the static magnetic field.Also,the acting mechanism of the magnetic field was explored from the perspective of the reduction process,reaction efficiency,phase composition,microstructure changes,and dynamic behavior of iron ores.The results showed that the magnetic field can increase the low-temperature reduction rate of carbon-bearing pellets of Bayan Obo lean iron ores.Under the conditions of reduction temperature of 1223 K,magnetic induction intensity of 1.0 T,and reduction time of 60 min,the reduction degree was 92.42%,1.65 times that without a magnetic field.The magnetic field promoted the replacement of Ca^(2+)and Fe^(2+),so that the hard-to-reduce iron-bearing silicates were reduced in the order of Fe2SiO_(4)→(Ca,Na)FeSiO_(4)→FeO→Fe.The magnetic field enabled loose minerals,more pores and cracks,and changes in the growth morphology and distribution position of metallic iron.Compared with the case under the non-magnetic condition,the metallic iron precipitated from the slag phase in a foliated shape,separated from the matrix iron oxides,and grew up at the junction of the slag phase and coke.The magnetic field significantly increased the interfacial chemical reaction rate of the carbothermic reduction of iron ores and reduced the internal diffusion resistance of gas in the product layer.Specifically,the interfacial chemical reaction rate increased by 138%and the internal diffusion coefficient increased by 309%.Therefore,the effect of the magnetic field on the internal diffusion resistance was the main cause for strengthening the low-temperature reduction of iron ores.

Effect of Transverse Static Magnetic Field on Droplets Transient and Inclusions Evolution During the Electroslag Remelting Process of GCr15 Ingots

The voltage was recorded to investigate the influence of the static magnetic field on droplet evolution during the mag-netically controlled electroslag remelting （MC-ESR） process. MC-ESR experiments were carried out under differentremelting current, and transverse static magnetic fields （TSMF） of 85 mT, 130 mT and 160 mT were superimposed.Statistical work was performed to obtain the quantitative data of the droplets. The ASPEX Explorer was utilized toinvestigate the inclusions evolution of GCr15 ingots. The number of the droplets was 31 in 20 s during the traditional ESRprocess and reached 50 and 51 under the MC-ESR process with the TSMF of 85 mT and 130 mT, respectively. Whencompared the traditional ESR process with the MC-ESR process, the inclusions amount reduced 67%.

Effect of transverse static magnetic field on radial microstructure of hypereutectic aluminum alloy during directional solidification

The effect of different scales thermoelectric magnetic convection(TEMC)on the radial solidification microstructure of hypereutectic Al alloy has been investigated under transverse static magnetic field during directional solidification,focusing on the formation of freckle.Our experimental and numerical simulation results indicate that the TEMC circulation at sample scale under transverse static magnetic field leads to the enrichment of solute Al on one side of the sample.The TEMC and the solute enrichment degree increase with the increase of magnetic field when the magnetic field increases to 0.5 T.The enrichment degree of solute elements under magnetic field is affected by temperature gradient and growth rate.The non-uniform distribution of solute Al in the radial direction of the sample results in the non-uniform distribution of primary dendrite arm spacing(PDAS).Moreover,the applied magnetic field can lead to freckle formation and its number increases with the increase of magnetic field.The change of freckle is consistent with the anisotropy TEMC caused by the anisotropy of primary dendrite or primary dendrite network under magnetic field.Finally,the mechanism of synergism effect of the anisotropy TEMC,the distribution of solute Al and the PDAS on freckle formation and evolution is studied during directional solidification under magnetic field.

Behavior of molten steel flow in continuous casting mold with different static magnetic field configurations

A three-dimensional mathematical model was established to investigate the behavior of molten steel flow and steel/slag interface with different processes and electromagnetic parameters under two different static magnetic field configurations [ruler-type electromagnetic brake （EMBr ruler） and vertical electromagnetic brake （V-EMBr）] in a continuous casting mold. The results showed that the brake effect of EMBr ruler is significantly influenced by its configuration parameters, the distance between the pole and bottom of the submerged entry nozzle （SEN）, and the port angle of the SEN outlet; therefore, it is not helpful to depress the diffusion of jet flow along the thickness direction of mold. For a constant SEN depth and port angle, there is a reasonable pole position （P = 0 mm） where the pole simultaneously covers three key zones, i.e., the jet flow impact zone and the upward and downward backflow zones. For V-EMBr, the magnetic field can simultaneously cover the three key zones and depress the diffusion of jet flow along the casting and thickness directions of the mold. Both the meniscus height and the impact intensity of the jet flow can be obviously depressed by V-EMBr even if the SEN depth and port angle have changed in the continuous casting process.