Analysis of vibration response characteristics of subway station and superstructure with hard combination

The vibration response and noise caused by subway trains can affect the safety and comfort of superstructures.To study the dynamic response characteristics of subway stations and superstructures under train loads with a hard combination,a numerical model is developed in this study.The indoor model test verified the accuracy of the numerical model.The influence laws of different hard combinations,train operating speeds and modes were studied and evaluated accordingly.The results show that the frequency corresponding to the peak vibration acceleration level of each floor of the superstructure property is concentrated at 10–20 Hz.The vibration response decreases in the high-frequency parts and increases in the lowfrequency parts with increasing distance from the source.Furthermore,the factors,such as train operating speed,operating mode,and hard combination type,will affect the vibration of the superstructure.The vibration response under the reversible operation of the train is greater than that of the unidirectional operation.The operating speed of the train is proportional to its vibration response.The vibration amplification area appears between the middle and the top of the superstructure at a higher train speed.Its vibration acceleration level will exceed the limit value of relevant regulations,and vibration-damping measures are required.Within the scope of application,this study provides some suggestions for constructing subway stations and superstructures.

Dynamic intelligent prediction approach for landslide displacement based on biological growth models and CNN-LSTM

Influenced by complex external factors,the displacement-time curve of reservoir landslides demonstrates both short-term and long-term diversity and dynamic complexity.It is difficult for existing methods,including Regression models and Neural network models,to perform multi-characteristic coupled displacement prediction because they fail to consider landslide creep characteristics.This paper integrates the creep characteristics of landslides with non-linear intelligent algorithms and proposes a dynamic intelligent landslide displacement prediction method based on a combination of the Biological Growth model(BG),Convolutional Neural Network(CNN),and Long ShortTerm Memory Network(LSTM).This prediction approach improves three different biological growth models,thereby effectively extracting landslide creep characteristic parameters.Simultaneously,it integrates external factors(rainfall and reservoir water level)to construct an internal and external comprehensive dataset for data augmentation,which is input into the improved CNN-LSTM model.Thereafter,harnessing the robust feature extraction capabilities and spatial translation invariance of CNN,the model autonomously captures short-term local fluctuation characteristics of landslide displacement,and combines LSTM's efficient handling of long-term nonlinear temporal data to improve prediction performance.An evaluation of the Liangshuijing landslide in the Three Gorges Reservoir Area indicates that BG-CNN-LSTM exhibits high prediction accuracy,excellent generalization capabilities when dealing with various types of landslides.The research provides an innovative approach to achieving the whole-process,realtime,high-precision displacement predictions for multicharacteristic coupled landslides.

Seismic isolation design and resilience improvement of railway station considering the influence of near-fault pulse-like ground motions

To improve the resilience of railway stations,a typical station was selected as the research object,and an isolation design was introduced.Twenty-four groups of near-fault pulse-like ground motions were selected.The seismic resilience of the no-isolation railway stations(NIRS)and the isolation railway stations(IRS)were compared to provide a numerical result of the improvement in resilience.The results show that in the station isolation design,the station's functional requirements and structural characteristics should be considered and the appropriate placement of isolation bearings is under the waiting room.Under the action of a rare earthquake,the repair cost,repair time,rate of harm and death of the IRS were decreased by 8.04 million,18.30 days,6.93×10^(-3)and 1.21×10^(-3),respectively,when compared to the NIRS.The IRS received a seismic resilience grade of three-stars and the NIRS only one-star,indicating that rational isolation design improves the seismic resilience of stations.Thus,for the design of stations close to earthquake faults,it is suggested to utilize appropriate isolation techniques to improve their seismic resilience.

Integrated Sensing and Communication Enabled Sensing Base Station:System Design,Beamforming,Interference Cancellation and Performance Analysis

This paper studies the sensing base station(SBS)that has great potential to improve the safety of vehicles and pedestrians on roads.SBS can detect the targets on the road with communication signals using the integrated sensing and communication(ISAC)technique.Compared with vehicle-mounted radar,SBS has a better sensing field due to its higher deployment position,which can help solve the problem of sensing blind areas.In this paper,key technologies of SBS are studied,including the beamforming algorithm,beam scanning scheme,and interference cancellation algorithm.To transmit and receive ISAC signals simultaneously,a double-coupling antenna array is applied.The free detection beam and directional communication beam are proposed for joint communication and sensing to meet the requirements of beamwidth and pointing directions.The joint timespace-frequency domain division multiple access algorithm is proposed to cancel the interference of SBS,including multiuser interference and duplex interference between sensing and communication.Finally,the sensing and communication performance of SBS under the industrial scientific medical power limitation is analyzed and simulated.Simulation results show that the communication rate of SBS can reach over 100 Mbps and the range of sensing and communication can reach about 500 m.

An Energy Management System with Mobile Energy Station Based Wireless Energy Transfer:System Design and Prototype Implementation

In indoor environments,various batterypowered Internet of Things(IoT)devices,such as remote controllers and electronic tags on high-level shelves,require efficient energy management.However,manually monitoring remaining energy levels and battery replacement is both inadequate and costly.This paper introduces an energy management system for indoor IoT,which includes a mobile energy station(ES)for enabling on-demand wireless energy transfer(WET)in radio frequency(RF),some energy receivers(ERs),and a cloud server.By implementing a two-stage positioning system and embedding energy receivers into traditional IoT devices,we robustly manage their energy storage.The experimental results demonstrate that the energy receiver can harvest a minimum power of 58 mW.

Research on Regional Crustal Deformation Characteristics Using Displacement Time Series Data of GNSS Reference Stations in Xinjiang

Using GNSS data from the Crustal Movement Observation Network of China( CMONOC),and PODAP software which was developed by the Satellite Navigation Institute of Wuhan University,the authors calculated data from 31 GNSS stations from July 1,2011 to December 31,2014,sampling at 30 seconds,and studied regional crustal deformation characteristics. Analysis results showed that in southwestern Xinjiang,the NS movement rate was influenced by Indian plate pushing. Under the blocking effect of the Tarim Basin,the EW movement rate was slightly smaller. In the north Tianshan area,the vertical dimension movement rate was quite different,which shows as a high gradient zone in the combination area between the basin and the mountain. With regards to regional overall characteristics,the authors considered that the intersection region from south Tianshan and Kunlun Mountains was prone to strong earthquakes, especially moderate-strong earthquakes,even more than M ≥ 7. 0 earthquakes. Middle of North Tianshan was the turning point of the vertical movement rate around Bayanbulak,and was also the high gradient zone of vertical movement. The area is also prone to strong earthquakes in the future.

DISPLACEMENT TIME SERIS AT FIDUCIAL STATIONS OBTAINED FROM GPS OBSERVATIONS IN CRUSTAL MOVEMENT OBSEREVATION NETWORK OF CHINA

A preliminary analysis of the time series of displacements at fiducial stations obtained from continuous GPS observations during the period of Sept. 1998 to Oct. 2001 in the Crustal Movement Observation Network of China (CMONOC) is made. The selection of datum for producing displacement time series suitable for earthquake prediction is discussed. Time series of horizontal crustal displacements are obtained by using a datum of a stable group of 9 stations with very small relative horizontal displacements in eastern China as reference. Time series of vertical crustal displacements are obtained by using a stable group of 7 stations scattered in different regions with relatively small relative vertical displacements as reference. During the period of 2000 to 2001, anomalous horizontal and vertical displacements occurred twice at the fiducial stations in western China. These anomalies may be related to seismic activities of magnitudes about 6 in the Yunnan region on the North South seismic belt.

Comparison of displacement damage effects on the dark signal in CMOS image sensors induced by CSNS back-n and XAPR neutrons

This study investigates the effects of displacement damage on the dark signal of a pinned photodiode CMOS image sensor(CIS)following irradiation with back-streaming white neutrons from white neutron sources at the China spallation neutron source(CSNS)and Xi'an pulsed reactor(XAPR).The mean dark signal,dark signal non-uniformity(DSNU),dark signal distribution,and hot pixels of the CIS were compared between the CSNS back-n and XAPR neutron irradiations.The nonionizing energy loss and energy distribution of primary knock-on atoms in silicon,induced by neutrons,were calculated using the open-source package Geant4.An analysis combining experimental and simulation results showed a noticeable proportionality between the increase in the mean dark signal and the displacement damage dose(DDD).Additionally,neutron energies influence DSNU,dark signal distribution,and hot pixels.High neutron energies at the same DDD level may lead to pronounced dark signal non-uniformity and elevated hot pixel values.

Data-augmented landslide displacement prediction using generative adversarial network

Landslides are destructive natural disasters that cause catastrophic damage and loss of life worldwide.Accurately predicting landslide displacement enables effective early warning and risk management.However,the limited availability of on-site measurement data has been a substantial obstacle in developing data-driven models,such as state-of-the-art machine learning(ML)models.To address these challenges,this study proposes a data augmentation framework that uses generative adversarial networks(GANs),a recent advance in generative artificial intelligence(AI),to improve the accuracy of landslide displacement prediction.The framework provides effective data augmentation to enhance limited datasets.A recurrent GAN model,RGAN-LS,is proposed,specifically designed to generate realistic synthetic multivariate time series that mimics the characteristics of real landslide on-site measurement data.A customized moment-matching loss is incorporated in addition to the adversarial loss in GAN during the training of RGAN-LS to capture the temporal dynamics and correlations in real time series data.Then,the synthetic data generated by RGAN-LS is used to enhance the training of long short-term memory(LSTM)networks and particle swarm optimization-support vector machine(PSO-SVM)models for landslide displacement prediction tasks.Results on two landslides in the Three Gorges Reservoir(TGR)region show a significant improvement in LSTM model prediction performance when trained on augmented data.For instance,in the case of the Baishuihe landslide,the average root mean square error(RMSE)increases by 16.11%,and the mean absolute error(MAE)by 17.59%.More importantly,the model’s responsiveness during mutational stages is enhanced for early warning purposes.However,the results have shown that the static PSO-SVM model only sees marginal gains compared to recurrent models such as LSTM.Further analysis indicates that an optimal synthetic-to-real data ratio(50%on the illustration cases)maximizes the improvements.This also demonstrates the robustness and effectiveness of supplementing training data for dynamic models to obtain better results.By using the powerful generative AI approach,RGAN-LS can generate high-fidelity synthetic landslide data.This is critical for improving the performance of advanced ML models in predicting landslide displacement,particularly when there are limited training data.Additionally,this approach has the potential to expand the use of generative AI in geohazard risk management and other research areas.

Slope displacement prediction based on multisource domain transfer learning for insufficient sample data

Accurate displacement prediction is critical for the early warning of landslides.The complexity of the coupling relationship between multiple influencing factors and displacement makes the accurate prediction of displacement difficult.Moreover,in engineering practice,insufficient monitoring data limit the performance of prediction models.To alleviate this problem,a displacement prediction method based on multisource domain transfer learning,which helps accurately predict data in the target domain through the knowledge of one or more source domains,is proposed.First,an optimized variational mode decomposition model based on the minimum sample entropy is used to decompose the cumulative displacement into the trend,periodic,and stochastic components.The trend component is predicted by an autoregressive model,and the periodic component is predicted by the long short-term memory.For the stochastic component,because it is affected by uncertainties,it is predicted by a combination of a Wasserstein generative adversarial network and multisource domain transfer learning for improved prediction accuracy.Considering a real mine slope as a case study,the proposed prediction method was validated.Therefore,this study provides new insights that can be applied to scenarios lacking sample data.

Simulation of Rotating Asymmetric Sideways Forces during Vertical Displacement Events in CFETR

Tokamak plasmas with elongated cross sections are susceptible to vertical displacement events(VDEs),which can damage the first wall via heat flux or electromagnetic(EM)forces.We present a 3D nonlinear reduced magnetohydrodynamic(MHD)simulation of CFETR plasma during a cold VDE following the thermal quench,focusing on the relationship among the EM force,plasma displacement,and the n=1 mode.The dominant mode,identified as m/n=2/1,becomes destabilized when most of the current is contracted within the q=2 surface.The displacement of the plasma current centroid is less than that of the magnetic axis due to the presence of SOL current in the open field line region.Hence,the symmetric component of the induced vacuum vessel current is significantly mitigated.The direction of the sideways force keeps a constant phase approximately compared to the asymmetric component of the vacuum vessel current and the SOL current,which in turn keep in-phase with the dominant 2/1 mode.Their amplitudes are also closely associated with the growth of the dominant mode.These findings provide insights into potential methods for controlling the phase and amplitude of sideways forces during VDEs in the future.

Possible effects of selecting different station distributions in the optimal sequence estimation method

Since the inception of the optimal sequence estimation (OSE) method,various research teams have substantiated its efficacy as the optimal stacking technique for handling array data,leading to its successful application in numerous geoscience studies.Nevertheless,concerns persist regarding the potential impact of aliasing resulting from the choice of distinct station distributions on the outcomes derived from OSE.In this investigation,I employ theoretical deduction and experimental analysis to elucidate the reasons behind the immunity of the Y_(l'm')-related common signal obtained through OSE to variations in station distribution selection.The primary objective of OSE is also underscored,i.e.,to restore/strip a Y_(l'm')-related common periodic signal from various stations.Furthermore,I provide additional clarification that the‘Y_(l'm')-related common signal’and the‘Y_(l'm')-related equivalent excitation sequence’are distinct concepts.These analyses will facilitate the utilization of the OSE technique by other researchers in investigating intriguing geophysical phenomena and attaining sound explanations.

Models to Simulate Effective Coverage of Fire Station Based on Real-Time Travel Times

In recent years,frequent fire disasters have led to enormous damage in China.Effective firefighting rescues can minimize the losses caused by fires.During the rescue processes,the travel time of fire trucks can be severely affected by traffic conditions,changing the effective coverage of fire stations.However,it is still challenging to determine the effective coverage of fire stations considering dynamic traffic conditions.This paper addresses this issue by combining the traveling time calculationmodelwith the effective coverage simulationmodel.In addition,it proposes a new index of total effective coverage area(TECA)based on the time-weighted average of the effective coverage area(ECA)to evaluate the urban fire services.It also selects China as the case study to validate the feasibility of the models,a fire station(FS-JX)in Changsha.FS-JX station and its surrounding 9,117 fire risk points are selected as the fire service supply and demand points,respectively.A total of 196 simulation scenarios throughout a consecutiveweek are analyzed.Eventually,1,933,815 sets of valid sample data are obtained.The results showed that the TECA of FS-JX is 3.27 km^(2),which is far below the standard requirement of 7.00 km^(2) due to the traffic conditions.The visualization results showed that three rivers around FS-JX interrupt the continuity of its effective coverage.The proposed method can provide data support to optimize the locations of fire stations by accurately and dynamically determining the effective coverage of fire stations.

Shear mechanical properties and frictional sliding responses of rough joint surfaces under dynamic normal displacement conditions

A comprehensive understanding of the dynamic frictional characteristics in rock joints under high normal load and strong confinement is essential for ensuring the safety of deep engineering construction and mitigating geological disasters.This study conducted shear experiments on rough rock joints under displacement-controlled dynamic normal loads,investigating the shear behaviors of joints across varying initial normal loads,normal loading frequencies,and normal loading amplitudes.Experimental results showed that the peak/valley shear force values increased with initial normal loads and normal loading frequencies but showed an initial increase followed by a decrease with normal loading amplitudes.Dynamic normal loading can either increase or decrease shear strength,while this study demonstrates that higher frequencies lead to enhanced friction.Increased initial normal loading and normal loading frequency result in a gradual decrease in joint roughness coefficient(JRC)values of joint surfaces after shearing.Positive correlations existed between frictional energy dissipation and peak shear forces,while post-shear joint surface roughness exhibited a negative correlation with peak shear forces through linear regression analysis.This study contributes to a better understanding of the sliding responses and shear mechanical characteristics of rock joints under dynamic disturbances.

Evaluation of a Wireless Solar Powered Personal Weather Station

We are evaluating dryland cotton production in Martin County, Texas, measuring cotton lint yield per unit of rainfall. Our goal is to collect rainfall data per 250 - 400 ha. Upon selection of a rainfall gauge, we realized that the cost of using, for example, a tipping bucket-type rain gauge would be too expensive and thus searched for an alternative method. We selected an all-in-one commercially available weather station;hereafter, referred to as a Personal Weather Station (PWS) that is both wireless and solar powered. Our objective was to evaluate average measurements of rainfall obtained with the PWS and to compare these to measurements obtained with an automatic weather station (AWS). For this purpose, we installed four PWS deployed within 20 m of the Plant Stress and Water Conservation Meteorological Tower that was used as our AWS, located at USDA-ARS Cropping Systems Research Laboratory, Lubbock, TX. In addition, we measured and compared hourly average values of short-wave irradiance (Rg), air temperature (Tair) and relative humidity (RH), and wind speed (WS), and calculated values of dewpoint temperature (Tdew). This comparison was done over a 242-day period (1 October 2022-31 May 2023) and results indicated that there was no statistical difference in measurements of rainfall between the PWS and AWS. Hourly average values of Rg measured with the PWS and AWS agreed on clear days, but PWS measurements were higher on cloudy days. There was no statistical difference between PWS and AWS hourly average measurements of Tair, RH, and calculated Tdew. Hourly average measurements of Rg and WS were more variable. We concluded that the PWS we selected will provide adequate values of rainfall and other weather variables to meet our goal of evaluating dryland cotton lint yield per unit rainfall.

Estimation of Displacement and Extension due to Reverse Drag of Normal Faults: Forward Method

In the case of reverse drag of normal faulting, the displacement and horizontal extension are determined based on the established equations for the three mechanisms: rigid body, vertical shear and inclined shear. There are three sub-cases of basal detachment for the rigid body model: horizontal detachment, antithetic detachment and synthetic detachment. For the rigid body model, the established equations indicate that the total displacement on the synthetic base (Dt2) is the largest, that on the horizontal base (Dt1) is moderate, and that on the antithetic base (Dt3) is the smallest. On the other hand, the value of (Dt1) is larger than the displacement for the vertical shear (Dt4). The value of (Dt1) is larger than or less than the displacement for the inclined shear (Dt5) depending on the original fault dip δ0, bedding angle θ, and the angle of shear direction β. For all original parameters, the value of Dt5 is less than the value of Dt4. Also, by comparing three rotation mechanisms, we find that the inclined shear produces largest extension, the rigid body model with horizontal detachment produces the smallest extension, and the vertical shear model produces moderate extension.

Retinal displacement after surgery for idiopathic macular hole

AIM:To review and summarize the mechanism hypothesis,influencing factors and possible consequences of macular retinal displacement after idiopathic macular hole(IMH)surgery.METHODS:PubMed and Web of Science database was searched for studies published before April 2023 on“Retinal displacement”,“Idiopathic macular holes”,and“Macular displacement”.RESULTS:Recently,more academics have begun to focus on retinal displacement following idiopathic macular holes.They found that internal limiting membrane(ILM)peeling was the main cause of inducing postoperative position shift in the macular region.Moreover,several studies have revealed that the macular hole itself,as well as ILM peeling method,will have an impact on the result.In addition,this phenomenon is related to postoperative changes in macular retinal thickness,cone outer segment tips line recovery,the occurrence of dissociated optic nerve fiber layer(DONFL)and the degree of metamorphopsia.CONCLUSION:As a subclinical phenomenon,the clinical significance of postoperative macular displacement cannot be underestimated as it may affect the recovery of anatomy and function.

Effect of high-multiple water injection on rock pore structure and oil displacement efficiency

Experimental methods,including mercury pressure,nuclear magnetic resonance(NMR)and core(wateroil)displacement,are used to examine the effects of high-multiple water injection(i.e.water injection with high injected pore volume)on rock properties,pore structure and oil displacement efficiency of an oilfield in the western South China Sea.The results show an increase in the permeability of rocks along with particle migration,an increase in the pore volume and the average pore throat radius,and enhanced heterogeneity after high-multiple water injection.Compared with normal water injection methods,a high-multiple water injection is more effective in improving the oil displacement efficiency.The degree of recovery increases faster in the early stage due to the expansion of the swept area,and the transition from oil-wet to water-wet.The degree of recovery increases less in the late stage due to various factors,including the enhancement of heterogeneity in the rocks.Considering both the economic aspect and the production limit of water flooding,it is recommended to adopt other technologies to further enhance oil recovery after 300 PV water injection.

A guidance strategy for rendezvous and docking to the space station in the Earth-Moon NRHO orbit

With the development of space technology,it is possible to build a space station in Earth-Moon space as a transit for Earth-Moon round-trip and entering in the deep space.Rendezvous and docking is one of the key technologies for building an Earth-Moon space station.A guidance strategy for rendezvous and docking from the Earth orbit to the space station in the Earth-Moon NRHO orbit is proposed in this paper,which is suitable for engineering applications.Firstly,the rendezvous and docking process is divided into three sections,i.e.,the large-range orbit transfer section,far-range guidance section,and close-range approaching section.The suitable terminal of large-range orbit transfer is selected according to the eigenvalue of NRHO orbit state transition matrix.The two-impulse guidance method based on the relative motion equation in the three-body problem is adopted for the far-range guidance section.The impulse time and amplitude are solved with the optimization algorithm.The linear constant three-body relative motion equation is proposed for the close-range approaching section,and the rendezvous and docking is completed by a two-stage linear approximation.Finally,a simulation analysis is carried out,and the simulation results show that the adopted dynamics equations and the designed guidance law are effective,and the three flight phases are naturally connected to accomplish the rendezvous and docking mission from the Earth orbit to the space station on the Earth-Moon NRHO.

Strategic Placement of Charging Stations for Enhanced Electric Vehicle Adoption in San Diego, California

California mandated that 100% of vehicles sold must be electric by 2035. As electric vehicles (EVs) reach a higher penetration of the car sector, cities will need to provide publicly accessible charging stations to meet the charging demand of people who do not have access to a private charging spot like a personal garage. We have chosen to limit our scope to San Diego County due to its non-trivial size, well-defined shape, and dependence on personal vehicles;this project models 100% of current vehicles as electric, roughly 2.5 million. By planning for the future, our model becomes more useful as well as more equitable. We anticipate that our model will find locations that can service multiple population centers, while also maximizing distance to other stations. Sensitivity analysis and testing of our algorithms are conducted for Coronado Island, an island with 24,697 residents. Our formulation is then scaled to set the parameters for the whole county.