Solving Multi-Objective Linear Programming Problem by Statistical Averaging Method with the Help of Fuzzy Programming Method

A multi-objective linear programming problem is made from fuzzy linear programming problem. It is due the fact that it is used fuzzy programming method during the solution. The Multi objective linear programming problem can be converted into the single objective function by various methods as Chandra Sen’s method, weighted sum method, ranking function method, statistical averaging method. In this paper, Chandra Sen’s method and statistical averaging method both are used here for making single objective function from multi-objective function. Two multi-objective programming problems are solved to verify the result. One is numerical example and the other is real life example. Then the problems are solved by ordinary simplex method and fuzzy programming method. It can be seen that fuzzy programming method gives better optimal values than the ordinary simplex method.

Modal Identification of Offshore Platforms Using Statistical Method Based on ERA

Identification of modal parameters of a linear structure with output-only measurements has received much attention over the past decades. In the paper, the Natural Excitation Technique (NExT) is used for acquisition of the impulse signals from the structural responses. Then Eigensystem Realization Algorithm (ERA) is utilized for modal identification. For disregarding the fictitious ‘computational modes', a procedure, Statistically Averaging Modal Frequency Method (SAMFM), is developed to distinguish the true modes from noise modes, and to improve the precision of the identified modal frequencies of the structure. An offshore platform is modeled with the finite element method. The theoretical modal parameters are obtained for a comparison with the identified values. The dynamic responses of the platform under random wave loading are computed for providing the output signals used for identification with ERA. Results of simulation demonstrate that the proposed method can determine the system modal frequency with high precision.

Solving Fuzzy Multi-Objective Linear Programming Problem by Applying Statistical Method

In this paper, the statistical averaging method and the new statistical averaging methods have been used to solve the fuzzy multi-objective linear programming problems. These methods have been applied to form a single objective function from the fuzzy multi-objective linear programming problems. At first, a numerical example of solving fuzzy multi-objective linear programming problem has been provided to validate the maximum risk reduction by the proposed method. The proposed method has been applied to assess the risk of damage due to natural calamities like flood, cyclone, sidor, and storms at the coastal areas in Bangladesh. The proposed method of solving the fuzzy multi-objective linear programming problems by the statistical method has been compared with the Chandra Sen’s method. The numerical results show that the proposed method maximizes the risk reduction capacity better than Chandra Sen’s method.

Numerical Analysis of the Erosion Mechanism inside the Tube Sockets of Main Steam Thermometers in a Coal-Fired Power Plant

Leakage occurring in the tube sockets of the main steam thermometers can seriously threaten the safe operation of coal-fired power plants.Here,assuming a 300 MW unit as a relevant testbed,this problem is investigated numerically through solution of the equations of fluid-dynamics in synergy with the mathematical treatment of relevant statistics.The results indicate that the steam can form a large-scale spiral flow inside the tube socket and continuously scour the inner wall.In the model with the protective casing setting angle of 60°,the average tangential fluid velocity can reach up to 4.8 m/s,which is about twice higher than that in the model with the protective casing setting angle of 0°.The wake disturbance generated by the flow around the thermo-sensitive body leads to differences in the fluid motion inside the tube sockets between the upstream and downstream thermometers.These differences are affected by the distance between the thermometers,the setting angle of protective casing,and other factors.The pressure of the main steam inside the tube socket for a R3 thermometer,located outside the curved pipeline,is about 1756 Pa higher than that of the L3 thermometer located outside the straight pipeline,indicating that the secondary flow generated in the curved pipeline is able to provide stronger energy for the large-scale spiral flow inside the tube socket.On the basis of these findings,an improvement scheme for the installation of long-itudinal ribs in the tube sockets is proposed.The simulation results show that the average tangential velocity of the fluid within the near-wall area of tube sockets decreases by more than 90%,which should be enough to effectively alleviate the damage to the inner wall caused by high-pressure fluid or particles.

A drag force formula for heterogeneous granular flow systems based on finite average statistical method

The existing drag models are mostly based on the assumption of homogenous fluidization.However,the use of a homogeneous drag model to predict a heterogeneous granular flow system will cause a deviation.In this study,we developed a drag force model based on the assumption of heterogeneous fluidization.To prevent weakening of the heterogeneous characteristics in the drag force formula,we propose a finite average statistical method to filter the information of the heterogeneous granular cluster.The filtered information was used to fit the modified drag formula,which can reflect the heterogeneity of the granular cluster considering different configurations.A comparison shows that the new proposed drag formula filtered by the finite average statistical method fits well with energy minimization multi-scale simulation results.

Fuzzy Synthetic Evaluation Model for Smart Washing Machine

Generally fuzzy control system (FCS) is worked in washing machine. For the fuzzy set theory, membership functions are the building blocks. In a fuzzy set, fuzziness is determined by its membership functions. The shapes of membership functions are important, because it has an effect on fuzzy inference system. The shapes of membership functions can be triangular, trapezoidal and gaussian. The most widely used triangular membership function is used in this paper, because it can capture the short time period. In washing machine, open loop control system is found. This paper applies a fuzzy synthetic evaluation method (FSEM) for washing cloth in washing machine as FSEM can handle the multiple criteria with the help of evaluation matrix generated from membership function and weight matrix generated by Analytical Hierarchy Process (AHP). The purpose of this research is to minimize the wash time. By applying FSEM, we get a wash time which is less than that wash time got from applying the Mamdani approach in FCS. An example is given for illustration. For more reduction of wash time, statistical averaging method is also used. To reduce the wash time, statistical averaging method can be used in Mamdani approach also.