LOW COST IMPLEMENTATION OF SPEED SENSORLESS INDUCTION MOTOR CONTROL USING STATOR FLUX ORIENTATION

The control platform of the induction motor （IM） with low costs is developed by using DSP MC56F8013 with a good performance/price rtaio. The control algorithm for the speed sensorless IM is studied based on the stator flux orientation （SFO）. The algorithm structure is simple to be implemented and cannot be influenced by motor parameters, The improved stator flux estimation is used to compensate errors caused by the low pass filter （LPF）. A new speed regulator is designed to ensure the system working with the maximal torque in the transient state. The system simulation and the prototype experiment are made. Results show that the con- trol system has good dynamic and static performance.

Research on Hybrid Power System with Dual Stator-winding and Its Decoupled Control Strategy

For the bi-power system adopted widely in future armored vehicles,a hybrid power generator with dual stator-winding was proposed.Its structure and working principle were analyzed first,and its main parameters were determined and verified according to the power requirements.The system's mathematical model was established,and a decoupled control method was put forward on the basis of the instantaneous reactive power theory.For the voltage building-up,a voltage control strategy was designed on the basis of mixed reactive power compensation to implement stabilized 28V and 270V outputs simultaneously.The simulation results show that the stabilization accuracy and disturbance rejection ability of the system are improved much more than other ordinary generators.

An Improved Proportional Integral Estimator of the Stator Resistance for a Direct Torque Controlled Induction Motor

In this paper, an improved PI （proportional integral） stator resistance estimation for a DTC （direct torque controlled） induction motor is proposed. This estimation method is based on an on-line stator resistance correction regarding the variations of the stator current estimation error. In fact, the input variable of the P1 estimator is the stator current estimation error. The main idea is to tune accurately the stator resistance value relatively to the evolution of the stator current estimation error gradient to avoid the drive instability and ensure the tracking of the actual value of the stator resistance. But there is an unavoidable steady state error between the filtered stator current modulus and its estimated value from the dq model of the machine which is due to pseudo random commutations of the inverter switches. This may deteriorate the performance of the proposed fuzzy stator resistance estimator. An offset has been introduced in order to overcome this problem, for different speed command values and load torques. Simulation results show that the proposed estimator was able to successfully track the actual value of the stator resistance lbr different operating conditions.

Direct Torque Control System and Sensorless Technique of Permanent Magnet Synchronous Motor

The direct torque control theory has achieved great success in the control ofinduction motors. However, in the DTC drive system of Permanent Magnet Synchronous Machine (PMSM)proposed a few years ago, there are many basic theoretical problems that must be clarified. Thispaper describes an investigation about the effect of the zero voltage space vectors in the DTCsystem of PMSM and points out that if using the zero voltage space vectors rationally, not only canthe DTC system be driven successfully but also the torque ripple is reduced and the performance ofthe system is improved. This paper also studies the sensorless technique in the DTC system of PMSMand configures the DTC system of PMSM with sensorless technique including zero voltage spacevectors. Numerical simulations and experimental tests have proved the theory correct. In thecondition of sensor-less, the DTC system of PMSM is wide-rangely speed adjusting, and the ratio ofspeed adjustment is 1: 100.

An Improved Stator Flux Observation Method of Permanent Magnet Synchronous Motor

The stator flux and electromagnetic torque observation is the basis of direct torque controlled permanent magnet synchronous motor( PMSM) drive system. However,the traditional stator flux observer based on voltage model is affected by integral initial values and integral drift,that based on current model is affected by the parameters of PMSM,so a new stator flux observation method is proposed based on an improved secondorder generalized integrator( SOGI). Compared to the stator flux observation method based on the conventional SOGI,the proposed method can not only overcome the influence of integral initial values and integral drift,but also completely eliminate the DC offset's influence. Therefore,the observation accuracy of stator flux is further improved. The simulation and experimental results both show that the proposed method has a higher stator flux and electromagnetic torque observation precision.

Dynamic modeling and direct power control of wind turbine driven DFIG under unbalanced network voltage conditions

This paper proposes an analysis and a direct power control (DPC) design of a wind turbine driven doubly-fed induction generator (DFIG) under unbalanced network voltage conditions. A DFIG model described in the positive and negative synchronous reference frames is presented. Variations of the stator output active and reactive powers are fully deduced in the presence of negative sequence supply voltage and rotor flux. An enhanced DPC scheme is proposed to eliminate stator active power oscillation during network unbalance. The proposed control scheme removes rotor current regulators and the decomposition processing of positive and negative sequence rotor currents. Simulation results using PSCAD/EMTDC are presented on a 2-MW DFIG wind power generation system to validate the feasibility of the proposed control scheme under balanced and unbalanced network conditions.

An Observing Method for Flux and Speed with Direct Torque Control

An observing method for stator flux and rotor flux is presented. Based on the proposed flux observing method, a novel speed estimator has been designed. At last, the speed estimator combined with the flux observing is applied in the direct torque control system without speed sensor. The simulation results show that these methods can improve the accuracy of speed observing and the low speed performance of direct torque control system, and strengthen the robustness of system.

无刷双馈电机研究综述与展望

无刷双馈电机具有结构可靠、变频器容量小等优势,非常适合灵活运行于防爆、易燃等特殊或极端工况,近年来受到广泛关注。该文根据无刷双馈电机的基本工作原理,明确了该类电机的命名原则与规范名称;总结了现有定转子方案的结构及性能特点,综合考虑性能指标与结构工艺,提出了转子双套绕组的发展方向;梳理了无刷双馈电机的稳态等效电路模型及基于各类数学模型的优化设计方法,针对现存难以完整考虑不同转速工况性能的不足,阐明了利用新型同步-异步相串联等效电路进行优化设计的思路;对比分析了经典及新近出现的无刷双馈电机控制系统拓扑和控制策略特点,面向典型电动、发电工况建立了完整的电机及控制系统。最后,对无刷双馈电机的上述理论研究问题及工业应用的发展方向进行了总结阐述,为该类电机的深入研究及加快推广应用提供参考和指导。

基于改进型Super-twisting的双馈感应发电机直接功率控制

为提高双馈感应发电机(DFIG)直接功率控制的鲁棒性和抗干扰能力,提出一种改进型超螺旋滑模(STSMC)的直接功率控制(DPC)。首先,建立参数摄动下的DFIG最大功率捕获模型和定子磁场定向的双馈感应发电机模型;然后,将非奇异快速终端滑模面(NFTSM)与一种改进型超螺旋(Super-twisting)优化算法结合,设计DFIG直接功率控制器(IST-NFTSMC)。其中所设计的非奇异滑模面能有效避免传统滑模控制(SMC)的奇异现象,且改进超螺旋控制律能有效削弱NFTSMC抖振,提高功率控制精度;最后,通过仿真和实验,与PI控制和传统SMC控制相比,该控制能削弱DFIG功率与电流抖振问题,加快其收敛速度,提高DFIG直接功率控制稳态精度。

车用永磁无刷直流电机弱磁控制仿真研究

永磁无刷直流电动机的转矩与转速会对电机的控制精度造成影响,导致电机弱磁控制效果差。为了提升整体控制性能,提出车用永磁无刷直流电机弱磁控制仿真方法。分析车用永磁无刷直流电机弱磁转矩特性,获取电机电磁转矩关系。根据获取结果建立永磁无刷直流电机弱磁控制系统,利用该系统控制电机弱磁的电磁转矩与运行效率,以此实现整体控制。实验结果表明,通过对所提方法开展电机运行效率测试、电机运行稳定性测试,验证了上述方法的有效性。

基于超扭曲滑模的双定子绕组感应电机转速磁通控制

针对双定子绕组感应电机DSWIMs(dual-stator winding induction machines)在传统直接转矩和磁通控制下转矩、磁通和电流纹波大,在低速下控制磁通难度大、噪声大等问题,提出1种基于超扭曲滑模控制器STSMC(super twisting sliding mode controller)的DSWIMs新型转速和磁通直接控制方法。通过设计满足李雅普诺夫稳定条件的有限时间收敛误差为0的非线性控制器,提出1种DSWIMs新型转矩分配算法,可使DSWIMs在较宽的转速范围内运行,并包括零转速,所需电磁转矩由2组绕组根据其额定功率提供。此外,针对DSWIMs设计了1种基于滑模控制的全阶观测器,能够高精度地估计绕组磁通、磁通角和转子转速,以实现最优磁通状态。最后,在1个3.3 kWDSWIM驱动系统上进行实验测试,评估所提DSWIM控制方案的性能,实验结果证明了所提控制方法、转矩分配算法和全阶观测器在不同速度区域的有效性。

基于虚拟方波注入的五相永磁同步电机开路故障下直接转矩控制

在传统直接转矩控制(DTC)中,参考磁链往往是一个固定值,这将导致五相永磁同步电机(PMSM)在正常及容错情况下运行时效率不高。为解决该问题,该文提出一种基于虚拟方波注入的DTC(VSWI-DTC)策略。首先,建立五相PMSM在正常和开路故障情况下的数学模型,在同步旋转坐标系中推导出恒定转矩下电流幅值与定子磁链幅值的关系。其次,设计最优定子磁链探测器。通过向定子磁链幅值中注入虚拟方波信号,根据电流幅值的变化情况补偿定子磁链幅值,在线探寻最优定子磁链幅值。最后,与无差拍DTC相结合,实现电机高效率DTC运行。实验结果表明,所提策略不但能保持DTC良好的动态性能,抑制开路故障引起的转矩脉动,而且提高了电机在正常和开路故障情况下的效率。

直线电机分段供电协同控制策略

针对多个变流器交替为长定子直线电机多个定子段分段供电存在的问题,该文提出一种电流协同控制策略来减小推力波动。首先,优化电机电路连接拓扑,将由同一变流器供电的定子段的中性点连接在一起,采用电流过零开通的切换策略,使得电流由一个定子段切换至另一个定子段的过程中,变流器的电流连续无畸变。然后,建立电机单个定子段(简称单元电机)的电压和推力方程。根据单元电机的状态方程,得出2个单元电机的电流之和、电流之差对应的状态方程及推力表达式,设计相应的电流协同控制器。通过2个单元电机的电流之和来控制系统输出推力、2个单元电机的电流之差来控制推力波动。该电流控制策略减少了动子过分段时产生的推力波动,实现推力与电流偏差导致的推力波动之间的解耦控制。仿真和实验结果验证了所提电流协同控制策略的有效性。

新型双定子无刷双馈风力发电机直接功率控制

新型双定子无刷双馈发电机包括内外功率绕组和内外控制绕组,二者分别通过中间带隔磁环的背靠背笼障转子进行磁场耦合。针对该新型双定子无刷双馈风力发电机提出一种直接功率控制方法,内外功率绕组及内外控制绕组分别串联以保持各自同相绕组的电磁一致性,将功率绕组有功和无功功率滞环比较器输出值及控制绕组磁链扇区号综合,采用查找表得到控制绕组机侧变流器所需输出的电压空间矢量。通过定量对比研究12/8极50 kW样机控制系统阶跃信号作用下的特性仿真与实验结果,验证了所提双定子无刷双馈风力发电机直接功率控制在亚同步~超同步速度变化范围内变速恒频发电、最大功率跟踪、无功功率与单位功率因数控制等方面的正确性、可行性和有效性。

一种多模式双定子开关磁阻电机混合控制系统

开关磁阻电机(switched reluctance motor,SRM)具有可靠性高、成本低、结构简单和起动转矩大等优点,但同时存在功率密度低、转矩脉动大的问题。该文针对新型磁场解耦型双定子开关磁阻电机(double stator switched reluctance machine,DSSRM)具有内定子、外定子、双定子、内外定子串联和并联5种工作模式的特性,设计一种高效低转矩脉动的多模式双定子开关磁阻电机混合控制系统。首先,构建综合考虑电机工作效率和转矩脉动的优化函数;其次,提出一种混合控制方法,在电机低速和高速时分别采用直接瞬时转矩控制和自抗扰控制,提高电机的动态性能;此外,为降低模式间切换时产生较大的转矩峰值,提出以转矩负反馈补偿理念为中心的模式切换策略。通过仿真和实验验证该控制系统的优越性,为推广新型双定子开关磁阻电机的应用奠定一定基础。

智能跑步机异步电机变频调速直接转矩控制

因智能跑步机控制系统存在延时的问题,导致跑步机的运行损耗高、效率低。为此,提出智能跑步机异步电机变频调速直接转矩控制方法。分析异步电机的变频调速效果,构建跑步机控制约束,将模型预测直接转矩控制算法作为非线性内部控制器的控制算法,估计定子磁链后预测定子磁链和电磁转矩,建立合适的目标函数,并采用末端输出控制法获取定子磁链和电磁转矩参考值,对跑步机系统延时加以补偿,完成智能跑步机异步电机变频调速直接转矩控制。实验结果表明,所提方法控制下的智能跑步机振幅曲线波动最小,电磁转矩在(0.5~1.5)N·m之间,稳定后的运行损耗和运行效率控制在67 W和0.77%左右,可有效减小跑步机的电磁转矩脉动,降低运行损耗,提高运行效率,且具有良好的平稳性。

一种定子单绕组无轴承开关磁阻电机的转子位移控制方法

提出了一种用于定子单绕组无轴承开关磁阻电机(Bearingless switched reluctance motor,BLSRM)的转子位移控制方法。首先介绍了定子单绕组无轴承开关磁阻电机的基本结构和工作原理,基于等效磁路法建立悬浮力和刚度的数学模型。其次,建立了转子动力学模型以获取悬浮力与转子位移间的关系模型。最后,设计了一台实验样机并在电机上进行悬浮控制实验。实验结果验证了所提控制方法的有效性。

基于端电压的定子无铁心永磁无刷直流电机换相误差识别与校正

定子无铁心永磁无刷直流电机(ironless-stator permanent magnet brushless DC motor,IPMBLDCM)的换相误差问题会导致电机性能下降。已有BLDCM驱动主要使用单级全桥或后级全桥的双级拓扑,并在此基础上分析换相误差引起的电路状态变化。同时,已有换相误差校正控制器主要使用PI控制器,但是PI控制器在处理非线性时变系统时性能下降。针对Buck级联三相半桥双级式拓扑驱动的换相误差问题,详细分析了在电动状态和能耗制动状态,换相时刻前、后电机端电压在多种换相误差情况下的变化,并给出能够在四象限运行状态使用的换相误差表征方法。在此基础上,设计基于无模型自适应控制方法的控制器,并针对研究对象设计换相误差的一步估计方法,加快控制器收敛速度,实现对换相误差的快速识别和校正。最后,在基于数字平台的电机控制系统上对所提理论和设计的控制器进行实验验证。

双定子无刷双馈风力发电机无速度传感器反步法直接功率控制

针对双定子无刷双馈发电机,将内外功率绕组及内外控制绕组分别同相串联以保证电磁一致性。基于Lyapunov和Popov稳定性理论,采用反步法和模型参考自适应系统设计一种无速度传感器的反步法直接功率控制策略,利用空间矢量脉宽调制(SVPMW)以固定开关频率驱动控制绕组机侧变流器IGBT,以减小功率绕组功率波动及电流总谐波畸变率。通过12/8极50 kW样机控制系统的特性仿真研究,结果表明:所提控制策略在亚同步~超同步的速度变化范围内,可实现变速恒频发电、最大功率跟踪、无功功率及单位功率因数控制,电流总谐波畸变率约为2%。