Interaction of 4-aminosalicylic Acid and Surfactants in Aqueous Solutions Using UV-Vis Spectra and Steady-state Fluorescence Spectroscopy

The interactions of 4-aminosalicylic acid （4-ASA） and surfactants in aqueous solutions were investigated by using UV-Vis spectra and steady-state fluorescence spectroscopy.The results showed that the strongest peak at UV-vis spectra of 4-ASA aqueous solution in the presence of cationic surfactant and cetyltrimethyl ammonium bromide （CTAB） appeared at 206 nm and took a red shift from 206 nm to 221 nm with the increase of 4-ASA concentrations from 0.8×10-5 to 4.4×10-4 mol/L.Similarly,the strongest peak at UV-vis spectra of 4-ASA aqueous solution in the presence of nonionic surfactant and polyvinylpyrrolidone （PVP） appeared at 206 nm and took a red shift from 206 nm to 219 nm with the increase of 4-ASA concentrations from 0.8×10-5 to 4.4×10-4 mol/L.However,the similar phenomena did not appeared in the presence of anion surfactant,sodium dodecyl sulfate （SDS）,the UV-vis spectra of 4-ASA aqueous solution remained the same peak position and the peak value increased with the 4-ASA concentration increase.The results could be attributed to the electrostatic attraction between 4-ASA and CTAB or PVP,as well as the electrostatic repulsion between 4-ASA and SDS.Furthermore,the value of critical micelle concentration （CMC） of surfactants in the presence of 4-ASA was determined with Fluorescence method.The first and second CMC of CTAB was 1.2×10-4 M and 2.4×10-4 M,respectively.The first and second CMC of PVP was 1.2×10-4 M and 2.8×10-4 M.SDS realized the multiple micellizations to form multiple CMC.

Geochemical analysis of marine sediments using fused glass disc by X-ray fluorescence spectrometry

一个方法为 Na 的内容决心被开发， Mg ，艾尔， Si ， P ， S ， Cl ， K ， Ca ， Ti ， V ， Cr ， Mn ， Fe ， Ni ， Cu ， Zn ， Ga ， Nb ， Zr ， Y ， Sr ， Rb ， Ba ，在使用的海洋的沉积样品盖住 26 专业，未成年者，和踪迹元素的 La 和 Ce 等等由X光检查荧光 spectrometry 熔化了玻璃圆盘。刻度用海洋的沉积被成为证明引用材料和样品由在不同比例与流沉积和碳酸盐标准样品混合几海洋的沉积准备了的合成标准。矩阵效果用理论高山被改正哈象内部标准的系数，经验系数和散布放射(为踪迹元素) 。方法的精确性被证明参考材料 GBW07314， GBW07334 和 GSMS6 的分析评估。结果在与 RSD 的对标准的证明价值的好同意不到 2.60% 除了 Y，有 RSD 的 Cr， Ga， Ce， La， Nb， Rb，和 V 不到 9.0%(n=12 ) 。

Speciation Analysis of Arsenic Compounds in Seafood by Ion Chromatography-Atomic Fluorescence Spectrometry

Ion chromatography-ultra violet-hydride generation-Atomic Florescence Spectrometry was applied to detect 5 arsenic species in seafoods. The arsenic species studied include arsenobetaine(As B), arsenite(As(III)), dimethylarsinic acid(DMA), monomethylarsonic acid(MMA), and arsenate(As(V)), which were extracted from samples using 2% formic acid. Gradient elution using 33 mmol L^(-1) CH_3COONH_4 and 15 mmol L^(-1) Na_2CO_3 with 10 mL CH_3CH_2OH at pH 8.4 allowed the chromatographic separation of all the species on a Hamilton PRP-X100 anion-exchange column in less than 8 min. In this study, an ultrasound extraction method was used to extract arsenic species from seafood. The extraction efficiency was good and the recoveries from spiked samples were in the range of 72.6%–109%; the precision between sample replicates was higher than 3.6% for all determinations. The detection limits were 3.543 μg L^(-1) for As B, 0.4261 μg L^(-1) for As(III), 0.216 μg L^(-1) for DMA, 0.211 μg L^(-1) for MMA, and 0.709 μg L^(-1) for As(V), and the linear coefficients were greater than 0.999. We also developed an application of this method for the determination of arsenic species in bonito, Euphausia superba, and Enteromorpha with satisfactory results. Therefore, it was confirmed that this method was appropriate for the detection of arsenic species in seafood.

Determination of Trace Germanium in Marine Sediments by Hydride Generation-Atomic Fluorescence Spectrometry (HG-AFS)

A method for the analysis of trace germanium in marine sediments by HG-AFS has been investigated. The experimental conditions such as the acidity of reduction reaction, the amount of sodium boro-hydride, the carrier gas flow rate, etc., were tested and optimized by using a kind of orthogonal design. The detection limit of the presented method is 0.95 μg L -1 for germanium. The calibration curve shows a satisfactory line in the concentration range 0-320 μg L -1 Ge with a variation coefficient of ±2.1%.

Evaluation of Atomic Fluorescence Spectrometry for Determination of Mercury Using a Low-Powered Argon Microwave Plasma Torch (MPT)

The Microwave-Induced Plasma (MIP) has received considerable attention during the past decade since theintroduction of the Becnakker Cavity. It has been commonly used as an atomization cell for atomic emission spectrometry (AES) and atomic absorption spectrometry (AAS), and a great success was achieved for both techniques. More

Determination of Content of Eight Elements in Metal Coating Smeared on Waste Plastics by X-ray Fluorescence Spectrometry

X-ray fluorescence spectrometry was used to detect the content of eight elements in metal coating smeared on waste plastics,and effects of sample cups,elements in plastic substrate,and interaction of elements in metal coating on detection results were analyzed. The results show that the RSD of the method used to detect element content in the metal coating smeared on the waste plastics ranged from 0.008% to 0.044%; the determination range of the eight elements was 0.002%-52.0%,and their detection limit ranged from 0.0002% to 0.0008%. The determination results of X-ray fluorescence spectrometry were consistent with that of ICP-AES. The method can provide technical support for the determination of damage and pollution caused by metal coating smeared on waste plastics.

Quantitative Analysis of FeMo Alloys by X-Ray Fluorescence Spectrometry

A quantitative analysis method of molybdenum in FeMo alloys by X-ray spectrometry using borate fusion technique was compared with that with pressed pellet. The complete pre-oxidation of FeMo alloys for the preparation of homogeneous fused discs was achieved by employing an automated fusion machine equipped with specially designed O2-blowing nozzles, which used lithium tetra-borate as flux with the addition of lithium nitrate (LiNO3) as oxidizer. The calibration curves of Mo and Fe were used in the quantitative analysis of standard materials and unknown plant samples with satisfactory accuracy and precision, utilizing the corrections of the matrix effects and line overlap. It was confirmed that the newly proposed method of preparing fused glass discs of FeMo alloys can replace the conventional wet chemical analyses requiring the labor intensive and time consuming procedure.

EVALUATON OF MICROWAVE PLASMA TORCH FOR ATOMIC FLUORESCENCE SPECTROMETRY WITH AN ULTRASONIC NEBULIZATION SAMPLE INTRODUCTION SYSTEM

In this paper, a new MPT(microwave plasma torch) device has been used as a atomizer for atomic fluorescence spectrometry. Spme elements, such as Zn, Cd, Hg, Pb, As, Co, Mg, Cu, Ag, Mn, Fe have been investigated in detail.

Screening and identification of bioactive compounds from citrus against non-structural protein 3 protease of hepatitis C virus genotype 3a by fluorescence resonance energy transfer assay and mass spectrometry

BACKGROUND Hepatitis C virus genotype 3a(HCV G3a)is highly prevalent in Pakistan.Due to the elevated cost of available Food and Drug Administration-approved drugs against HCV,medicinal natural products of potent antiviral activity should be screened for the cost-effective treatment of the disease.Furthermore,from natural products,active compounds against vital HCV proteins like non-structural protein 3(NS3)protease could be identified to prevent viral proliferation in the host.AIM To develop cost-effective HCV genotype 3a NS3 protease inhibitors from citrus fruit extracts.METHODS Full-length NS3 without co-factor non-structural protein 4A(NS4A)and codon optimized NS3 protease in fusion with NS4A were expressed in Escherichia coli.The expressed protein was purified by metal ion affinity chromatography and gel filtration.Citrus fruit extracts were screened using fluorescence resonance energy transfer(FRET)assay against the protease and polyphenols were identified as potential inhibitors using electrospray ionization-mass spectrometry(MS)/MS technique.Among different polyphenols,highly potent compounds were screened using molecular modeling approaches and consequently the most active compound was further evaluated against HCV NS4A-NS3 protease domain using FRET assay.RESULTS NS4A fused with NS3 protease domain gene was overexpressed and the purified protein yield was high in comparison to the lower yield of the full-length NS3 protein.Furthermore,in enzyme kinetic studies,NS4A fused with NS3 protease proved to be functionally active compared to full-length NS3.So it was concluded that co-factor NS4A fusion is essential for the purification of functionally active protease.FRET assay was developed and validated by the half maximal inhibitory concentration(IC50)values of commercially available inhibitors.Screening of citrus fruit extracts against the native purified fused NS4A-NS3 protease domain showed that the grapefruit mesocarp extract exhibits the highest percentage inhibition 91%of protease activity.Among the compounds identified by LCMS analysis,hesperidin showed strong binding affinity with the protease catalytic triad having S-score value of-10.98.CONCLUSION Fused NS4A-NS3 protease is functionally more active,which is effectively inhibited by hesperidin from the grapefruit mesocarp extract with an IC50 value of 23.32μmol/L.

X-ray fluorescence spectrometry determination of open-hearth furnace slag by pressed powder briquetting

A rapid analysis method of determining content of eight compounds of open-hearth furnace slag was developed using X-ray fluorescence spectrometry and pressed powder briquettes. Matrix effect was corrected using theoretical alpha coefficient. Grains-size effect was eliminated by optimized sample preparation technique parameters. Mineral effect was corrected with standard curve of specially made standard samples. The analysis results of TiO2, TFe, SiO2, MgO, Al2O3, CaO, MnO and P2O5 in slag samples showed that both precision and accuracy are comparable with that of chemical method.

Determination of Selenium in Marine Aquatic Products by Hydride Generation-atomic Fluorescence Spectrometry (HG-AFS)

A method for the analysis of selenium in marine aquatic products by HG-AFS has been investigated. The methodis based on the reduction of inorganic selenium to volatile SeH2 which is bubbled out by carrier gas of pure argon, and thenswept to Ar-H2 flame quarts atomizer to measure its fluorescence intensity. The hydride generation, transportation, atom-ization and some instrumental parameters were studied by a kind of orthogonal design. The optimum conditions selected areas follows: reactive acidity, 20% HCl; the amount of NaBH4, 4.9mL; gas flow of argon, 600mLmin-1; atomizing tempera-ture, 200 °C; negative high voltage, -300V; light current, 100 mA; integral time, 7s. The detection limit of the presentedmethod is 0.072 μg L-1 for selenium. The calibration curve shows a satisfactory line in the concentration range from 0.000 to1.000 μg L-1 Se. The recovery is 95.8%-102.2% .

Elemental and proximate analysis of coal by x-ray fluorescence assisted laser-induced breakdown spectroscopy

Although laser-induced breakdown spectroscopy(LIBS),as a fast on-line analysis technology,has great potential and competitiveness in the analysis of chemical composition and proximate analysis results of coal in thermal power plants,the measurement repeatability of LIBS needs to be further improved due to the difficulty in controlling the stability of the generated plasmas at present.In this paper,we propose a novel x-ray fluorescence(XRF) assisted LIBS method for high repeatability analysis of coal quality,which not only inherits the ability of LIBS to directly analyze organic elements such as C and H in coal,but also uses XRF to make up for the lack of stability of LIBS in determining other inorganic ash-forming elements.With the combination of elemental lines in LIBS and XRF spectra,the principal component analysis and the partial least squares are used to establish the prediction model and perform multi-elemental and proximate analysis of coal.Quantitative analysis results show that the relative standard deviation(RSD) of C is 0.15%,the RSDs of other elements are less than 4%,and the standard deviations of calorific value,ash content,sulfur content and volatile matter are 0.11 MJ kg,0.17%,0.79% and 0.41%respectively,indicating that the method has good repeatability in determination of coal quality.This work is helpful to accelerate the development of LIBS in the field of rapid measurement of coal entering the power plant and on-line monitoring of coal entering the furnace.

3D Fluorescence Characterization of Synthetic Organic Dyes

The identification of dyes is important in research on museum artefacts as well as in forensic applications. UV-visible absorption spectroscopy cannot unambiguously distinguish dyes with similar hues, while mass spectrometry may fail to distinguish isobaric dyes. The detailed patterns produced by 3D fluorescence spectroscopy appear to be virtually unique, even among dyes that are closely related positional isomers. We report these patterns for 65 dyes from the Schweppe Library of Synthetic Organic Dyes as well as measurements suggesting both the capabilities and limitations of this method.

Fluorescence-quenching of Tryptophan Ion-18-crown-6 Complex——A Different Observation from Its Neutral Counterpart

It is well-known that primary amines form inclusive complexes with crown ethers. This kind of noncovalently inclusive complexes, exemplified tryptophan complex with 18-crown-6, was studied by combination of two experimental methods, fluorimetry and mass spectrometry, with theoretical calculation. Fluorescence intensity of tryptophan in the absence and the presence of 18-crown-6 in aqueous HAc-NaAc buffer solution at pH=3.73 has been studied by fluorometry. The fuorescence intensity decreases significantly with increasing the concentration of 18-crown-6. The association constant K for the 1：1 complex of tryptophan ion-18-crown-6 was determined by means of fuorimetry. Mass spectrometric study of the complex gives direct evidence of the complex in the gas phase whose structure and binding energy are properly predicted by ab initio calculation.