Effects of Steam Heat Treatment on the Surface Contact Angle of Chinese Fir

The aim of this study was investigate the effects of heat treatment on the contact angle of Chinese fir, and the indicators affecting the change of contact an-gle change. It was determined that the duration of treatment had significant effect on the change curves of contact angle of Chinese fir wood due to the change curves of contact angle became more centralized and orderly after the specimens heat treated at 180 ℃. Compared with the untreated wood, the contact angle in-creased from 51＆#176; to 124＆#176; after 4 h treatment, and hydroxyl absorbance of hy-drophilic functional groups decreased from 2.08 to 1.63, while carbonyl absorbance from 0.92 to 0.62. The surface roughness has not significant influence on the con-tact angle. Heat treatment of the Chinese fir caused surface morphological change, which produced hol owed-out phenomenon. The increased surface contact angle caused by heat treatment can be used for outdoor and sauna facilities.

Thermodynamic,Economic,and Environmental Analyses and Multi-Objective Optimization of Dual-Pressure Organic Rankine Cycle System with Dual-Stage Ejector

A novel dual-pressure organic Rankine cycle system(DPORC)with a dual-stage ejector(DE-DPORC)is proposed.The system incorporates a dual-stage ejector that utilizes a small amount of extraction steam from the highpressure expander to pressurize a large quantity of exhaust gas to performwork for the low-pressure expander.This innovative approach addresses condensing pressure limitations,reduces power consumption during pressurization,minimizes heat loss,and enhances the utilization efficiency of waste heat steam.A thermodynamic model is developed with net output work,thermal efficiency,and exergy efficiency(W_(net,ηt,ηex))as evaluation criteria,an economicmodel is established with levelized energy cost(LEC)as evaluation index,anenvironmentalmodel is created with annual equivalent carbon dioxide emission reduction(AER)as evaluation parameter.A comprehensive analysis is conducted on the impact of heat source temperature(T_(S,in)),evaporation temperature(T_(2)),entrainment ratio(E_(r1),E_(r2)),and working fluid pressure(P_(5),P_(6))on system performance.It compares the comprehensive performance of the DE-DPORC system with that of the DPORC system at TS,in of 433.15 K and T2 of 378.15 K.Furthermore,multi-objective optimization using the dragonfly algorithm is performed to determine optimal working conditions for the DE-DPORC system through the TOPSIS method.The findings indicate that the DEDPORC system exhibits a 5.34%increase inWnet andηex,a 58.06%increase inηt,a 5.61%increase in AER,and a reduction of 47.67%and 13.51%in the heat dissipation of the condenser andLEC,compared to theDPORCsystem,highlighting the advantages of this enhanced system.The optimal operating conditions are TS,in=426.74 K,T_(2)=389.37 K,E_(r1)=1.33,E_(r2)=3.17,P_(5)=0.39 MPa,P_(6)=1.32 MPa,which offer valuable technical support for engineering applications;however,they are approaching the peak thermodynamic and environmental performance while falling short of the highest economic performance.

Dynamic simulation of drum level sloshing of heat recovery steam generator

Drum level sloshing is the latest discovery in the application of heat recovery steam generator (HRSG) in combined cycle, and shows certain negative influence on drum level controlling. In order to improve drum level controlling, influence factors on the drum level sloshing were investigated. Firstly, drum sub-modules were developed using the method of modularization modeling, and then the model of drum level sloshing was set up as well. Experiments were carried out on the experimental rig, and the model was validated using the obtained experimental results. Dynamic simulation was made based on the model to get a 3-D graph of drum level sloshing, which shows a vivid procedure of drum level sloshing. The effect of feed-water flow rate, main-steam flow rate and heating quantity on the drum level sloshing was analyzed. The simulation results indicate that the signals with frequency higher than 0.05 Hz are that of drum level sloshing, the signals with frequency of 0.0-0.05 Hz are that of drum level trendy and "false water level", and variation of the feed-water flow rates, main-steam flow rates and heating quantities can change the frequency of drum level sloshing, i.e., the frequency of sloshing increases with the increase of feed-water flow rate, or the decrease of the main-steam flow rate and the heating quantity. This research work is fundamental to improve signal-to-noise ratio of drum level signal and precise controlling of drum level.

Fabrication of Crack-Free Flattened Bamboo and Its Macro-/MicroMorphological and Mechanical Properties

This work aimed to help the bamboo industry develop methodology for producing imperfection-free bamboo boards that can serve either decorative or structural benefit to consumers seeking to engage with the bioeconomy.Specifically,softened and slotted bamboo tubes were handled by a roller device with nails to render crack-free flattened bamboo board.Softening temperature and time were optimized herein according to findings regarding chemical composition and board mechanical properties.The optimal softening parameters for saturated steam heat treatment is proved to be 160°C for 8 min.The flattened bamboo board possesses an increased bending strength of 101.5 MPa and a decreased bending modulus of 7.7 GPa,being compared with only-softened bamboo.The corresponding changing mechanism is determined in-depth by the micro-morphological and mechanical results based on in-situ SEM and AFM technologies.Under the action of nails and rolling processes,the bamboo texture becomes compact with crushed and fragmented conduit walls.The resulting cell cavity then becomes stretched and compressed,taking on a morphology which allows for the mechanical penalties associated with flattening to be avoided.According to the micro-mechanical results obtained by AFM,compared with unflatten bamboo,the Young’s modulus of the cell membrane in transverse direction(YT)decreases to 1.00 GPa while the corresponding Young’s modulus in radial direction(YR)increases to 7.29 GPa.

Study on Preparation of Lignin-Containing Nanocellulose from Bamboo Parenchyma

Bamboo vascular bundle fiber and parenchyma(BP)are separated by high-temperature treatment with saturated steam.Bamboo vascular bundle fiber is widely used in the market,but how to develop and utilize parenchyma tissue is a difficult problem.The sulfated cellulose nanofibers(ANFs)were obtained by sulfating BP with a deep eutectic solvent(DES),which provided a theoretical basis for the value-added utilization of BP.Using DES as the reaction medium and reagent,the BP was grafted with a sulfonic acid group to form a gel substance in water,ANFs and nanocellulose gel were obtained by ultrasonic cell crusher.The highest yield of ANFS was 75%.The width of the ANFs was about 3 nm,and a small number of nanofiber aggregates existed at the same time.A high aspect ratio of ANFs,due to their high viscosity,has potential applications as enhancers at low concen-trations.Lewis acid(ZnCl 2)added based on binary(DES)greatly improved the thermal stability of the ANFs and maintained the crystal form of cellulose I.

Dynamic simulation of hydrodynamic model of drum level wave action and sloshing

In order to build the model of the drum level wave action and sloshing, based on the method of modularization modeling, the hydrodynamic model of drum level wave action and sloshing was developed, and dynamic simulation researches were carried out based on the model. The results indicate that both drum level and drum length have functional relations with period of drum level wave action and sloshing. When the drum level decreases or drum length increases, the period of drum level wave action and sloshing increases, density of liquid and number of sub-module division have little influence on the period of drum level wave action and sloshing. The model was validated by the analytical solution theory of liquid’s wave action and sloshing in cuboid container, and the 3D graphics of drum level wave action and sloshing was also obtained. The model can dynamically reflect the rules of wave action and sloshing of water in the container exactly.

Optimal Dispatch and Pricing of Industrial Parks Considering CHP Mode Switching and Demand Response

Industrial parks(IPs)play a crucial role in facilitating economic efficiency and comprehensive energy utilization in the industrial age.At the same time,multi-energy coupling and management of various types of energy in IP have become serious challenges.In this paper,combined heat and power unit(CHP)model considering operation mode switching characteristics is formulated by exploring its internal composition to improve output flexibility of the energy supply side.Then,heat and electricity integrated energy system(HE-IES)optimal dispatch and pricing model are established,taking electricity and heat demand response strategy and steam thermal inertia property into account.Based on the above models,a mixed-integer bilinear programming framework is designed to coordinate the day-ahead operation and pricing strategy of the HE-IES in the IP.The scenario study is carried out on a practical industrial park in Southern China.Numerical results indicate the proposed mechanism can effectively improve IP’s energy utilization and economic efficiency.

Flow and Heat Transfer Characteristics in Rotating Two-pass Channels Cooled by Superheated Steam

In a modern gas turbine,using superheated steam to cool the vane and blade for internal convection cooling is a promising alternative to traditional compressor air.However,further investigations of steam cooling need to be performed.In this paper,the three-dimensional flow and heat transfer characteristics of steam are numerically investigated in two-pass square channels with 45° ribbed walls under stationary and rotating conditions.The investigated rotation numbers are 0 and 0.24.The simulation is carried out by solving the Reynolds averaged Navier-Stokes equations employing the Reynolds stress turbulence model,especially considering two additional terms for Coriolis and rotational buoyancy forces caused by the rotating effect.For comparison,calculations for the air-cooled channels are done first at a Reynolds number of 25 000 and inlet coolant-to-wall density ratio of 0.13.The results are compared with the experiment data.Then the flow and heat transfer in steam-cooled channels are analyzed under the same operating conditions.The results indicate that the superheated steam has better heat transfer performance than air.Due to the combined effect of rotation,skewed ribs and 180° sharp turn,the secondary flow pattern in steam-cooled rotating two-pass channels is quite complex.This complex secondary flow pattern leads to strong anisotropic turbulence and high level of anisotropy of Reynolds stresses,which have a significant impact on the local heat transfer coefficient distributions.

An Experimental Investigation of Heat Transfer Characteristics for Steam Cooling in a Rectangular Channel with Parallel Ribs

An experimental study of heat transfer characteristics in superheated steam cooled rectangular channels with parallel ribs was conducted.The distribution of the heat transfer coefficient on the rib-roughed channel was measured by IR camera.The blockage ratio(e/Dh) of the tested channel is 0.078 and the aspect ratio(W/H) is fixed at3.0.Influences of the rib pitch-to-height ratio(P/e) and the rib angle on heat transfer for steam cooling were investigated.In this paper,the Reynolds number(Re) for steam ranges from 3070 to 14800,the rib pitch-to-height ratios were 8,10 and 12,and rib angles were 90°,75°,60°,and 45°.Based on results above,we have concluded that:In case of channels with 90° tranverse ribs,for larger rib pitch models(the rib pitch-to-height ratio=10 and12),areas with low heat transfer coefficient in front of rib is larger and its minimum is lower,while the position of the region with high heat transfer coefficient nearly remains the same,but its maximun of heat transfer coefficient becomes higher.In case of channels with inclined ribs,heat transfer coefficients on the surface decrease along the direction of each rib and show an apparent nonuniformity,consequently the regions with low Nusselt number values closely following each rib expand along the aforementioned direction and that of relative high Nusselt number values vary inversely.For a square channel with 90° ribs at Re= 14800,wider spacing rib configurations(the rib pitch-to-height ratio=10 and 12) give an area-averaged heat transfer on the rib-roughened surface about8.4%and 11.4%more than P/e=8 model,respectively;for inclined parallel ribs with different rib angles at Re=14800,the area-averaged heat transfer coefficients of 75°,60° and 45° ribbed surfaces increase by 20.1%,42.0%and 44.4%in comparison with 90° rib angle model.45° angle rib-roughened channel leads to a maximal augmentation of the area-averaged heat transfer coefficient in all research objects in this paper.

Performance Improvement of Combined Cycle Power Plant Based on the Optimization of the Bottom Cycle and Heat Recuperation

Many F class gas turbine combined cycle （GTCC） power plants are built in China at present because of less emission and high efficiency. It is of great interest to investigate the efficiency improvement of GTCC plant. A combined cycle with three-pressure reheat heat recovery steam generator （HRSG） is selected for study in this paper. In order to maximize the GTCC efficiency, the optimization of the HRSG operating parameters is performed. The operating parameters are determined by means of a thermodynamic analysis, i.e. the minimization of exergy losses. The influence of HRSG inlet gas temperature on the steam bottoming cycle efficiency is discussed. The result shows that increasing the HRSG inlet temperature has less improvement to steam cycle efficiency when it is over 590℃. Partial gas to gas recuperation in the topping cycle is studied. Joining HRSG optimization with the use of gas to gas heat recuperation, the combined plant efficiency can rise up to 59.05% at base load. In addition, the part load performance of the GTCC power plant gets much better. The efficiency is increased by 2.11% at 75% load and by 4.17% at 50% load.

Mathematical Modelling of the Transient Response of Pipeline

Steam pipelines applied in power units operate at high pressures and temperatures.In addition,to stress from the pipeline pressure also arise high thermal stresses in transient states such as start-up,shutdown or a load change of the power unit.Time-varying stresses are often the cause of the occurrence of fatigue cracks since the plastic deformations appear at the stress concentration regions.To determine the transient temperature of the steam along the steam flow path and axisymmetric temperature distribution in the pipeline wall,a numerical model of pipeline heating was proposed.To determine the transient temperature of the steam and pipeline wall the finite volume method(FVM) was used Writing the energy conservation equations for control areas around all the nodes gives a system of ordinary differential equations with respect to time.The system of ordinary differential equations of the first order was solved by the Runge-Kutta method of the fourth order to give the time-temperature changes at the nodes lying in the area of the wall and steam.The steam pressure distribution along pipeline was determined from the solution of the momentum conservation equation.Based on the calculated temperature distribution,thermal stresses were determined.The friction factor was calculated using the correlations of Churchill and Haaland,which were proposed for pipes with a rough inner surface.To assess the accuracy of the proposed model,numerical calculations were also performed for the thin-walled pipe,and the results were compared to the exact analytical solution.Comparison of the results shows that the accuracy of the proposed model of pipeline heating is very satisfactory.The paper presents examples of the determination of the transient temperature of the steam and the wall.