Soil Plug Effect Prediction and Pile Driveability Analysis for Large-Diameter Steel Piles in Ocean Engineering

Long steel piles with large diameters have been more widely used in the field of ocean engineering. Owing to the pile with a large diameter, soil plug development during pile driving has great influences on pile driveability and bearing capacity. The response of soil plug developed inside the open-ended pipe pile during the dynamic condition of pile-driving is different from the response under the static condition of loading during service. This paper addresses the former aspect. A numerical procedure for soil plug effect prediction and pile driveabihty analysis is proposed and described. By taking into consideration of the pile dimension effect on side and tip resistance, this approach introduces a dimensional coefficient to the conventional static eqnihbrium equations for the plug differential unit and proposes an improved static equity method for the plug effect prediction. At the same time, this approach introduces a simplified model by use of one-dimensional stress wave equation to simulate the interaction between soil plug and pile inner wall. The proposed approach has been applied in practical engineering analyses. Results show that the calculated plug effect and pile driveabihty based on the proposed approach agree well with the observed data.

Effect of Sacrificial Anode Protection for Steel Pipe Piles at Dandong Port

The sacrificial anode protection system for the steel pipe piles of the 3rd berth of Dandong; wharf at Dandong port has operated for eight years. In this paper, the program design and the protection effect of the sacrificial anode protection system are presented. The results of various inspections show that the piles are protected very satisfactorily.

Control of floor heaves with steel pile in gob-side entry retaining

A new approach named as steel pile method is innovatively proposed in this study to control severe floor heaves in gob-side entry retaining. It is required that the steel piles be installed in the floor corners with a certain interval before the influence of the dynamic pressure induced by current panel extraction. Using numerical simulation and theoretical analysis, this study investigated the interaction between the steel piles and the floor rocks during the service life of the steel piles, and revealed the mechanism of the steel piles in controlling floor heaves. The effect of the steel pile parameters on the control of floor heaves was presented and elaborated. It is found that the effectiveness of the steel piles in controlling floor heaves can be enhanced with greater installed dip angle, longer length and smaller interval of the steel piles.Compared with traditional methods, e.g., using floor anchor bolts and floor restoration, the advantages using steel pile were successfully defined in terms of controlling effect and economic benefits. It is hoped that the proposed method can contribute to the development of gob-side entry retaining technique.

Experiments of Multi-element Composite Foundation with Steel Pipe Pile and Gravel Pile

A set of serf-developed apparatus for foundation physical model were utilized to conduct model tests of the multi-element composite foundation with a steel pipe pile and several gravel piles. Some load-bearing characteristics of the multi-element Composite foundation, including the curves of foundation settlement, stresses of piles, pile-soil stress ratio, and load-sharing ratio of piles and soil, were obtained to study its working performances in silty sand soil. The experimental results revealed that the multi-element composite foundation with steel pipe pile and gravel pile contributed more than the gravel pile composite foundation in improving the bearing capacity of the silty fine sand.

Leachate Control Technology Using H-Jointed Steel Pipe Sheet Piles with H-H Joints at Coastal Landfills

H-H joint of ＂H-jointed SPSP with H-H joint＂, which is made up of interlocking two H-steel sections of different sizes, is the one of SPSP＇s joint to improve the hydraulic conductivity. ＂H-H jointed SPSP with H-H joint＂ is expected to be applied to a vertical cutoff wall in coastal landfill sites. In H-jointed SPSP with H-H joint, the H-joint is completely imperviousness. H-H joint, however, is pervious at interlocked state because a gap of 8 to 11 mm is left between the interlocking flanges, therefore, a water interception treatment must be conducted to seal the gap. The water shielding treatment of H-H joint is executed by coating the gaps with a water-swelling sheet of paint before its installation. Then, hollow space is generated in H-H joint after treating by water-swelling sheet, and that space can be used effectively. This paper proposes leachate control technologies using H-H joint interior space of SPSP cutoff walls. The possibility of those technologies and hydraulic conductivity of H-jointed SPSP with H-H joints are demonstrated by conducting the hydraulic conductivity test.

Study on Interface mechanical behavior of steel tube reinforced concrete composite pile

Currently for the steel tube reinforced concrete composite pile research, although predecessors make a comprehensive research on the composite pile beating performance, design technology, but there are still many problems have not been solved, such as the steel tube reinforced concrete pile composite interracial force learn performance research is still in the initial stage. In this paper, we mainly discuss the research methods of several interface mechanical properties and propose the possibility of studying the mechanical properties of the steel tube reinforced concrete composite pile by using the principle of ultrasonic speckle.

The Effective Buckling Length on Numerical Study of Pipe-Sectioned Pier-Pile Integral Steel Structure

Pier-Pile integral structures provide construction works with many environmental and landscape advantages. For example, the space required to construct these structures is smaller than that of other bridges due to the footing being removed, meaning that it is not necessity to greatly change the surroundings of these bridges. While there are environmental and landscape advantages, there are also a few demerits for the overall land-scape designs, including demerits in the design of this proposed structure which consists of relatively slender parts. This proposed structure has already been constructed in areas where possibility of a severe earthquake is low. However, some problems that have yet to be examined are related to the use of this proposed structure in areas where earthquakes are frequent. Lacking detailed studies of its behavior during severe earthquakes, it is currently difficult to construct these structures in Japan. Consequently, it is necessary to investigate in detail limited performance about compression and bending moment, and earthquake- resistant performance of these structures in order to resolve these problems. In this paper, It was clarified the relationship between the rigidity of the ground and the effective buckling length by buckling analysis and elasto- plastic finite deformation analysis. Moreover, it was proposed a simplified formula using a proposed characteristic value β and several factors for analysis accuracy. A simplified formula would support to determine the effective buckling length to design the pier using the load-bearing capacity curve based on the slenderness ratio parameter.

拉森钢板桩在软土地层深基坑支护中的应用

拉森钢板桩作为一种低碳环保、可回收的建筑材料,在各类建筑中发挥着重要的作用。以蕲春县某河道整治项目为例,选取了基坑支护工程中2个典型剖面,介绍了拉森钢板桩在软土地层中的应用,并将天汉软件设计计算结果、MIDAS GTS NX数值模型分析结果与基坑监测结果进行对比分析,三者得到的支护结构位移、受力数值较为一致,表明天汉深基坑设计软件的客观合理性及可靠性非常高,施工前可以用MIDAS GTS NX数字模拟来预测及引导施工。

Improvement of Technological Solutions for Sheet Piling Walls Made of U-Shape Piles

As it is evident from the practice of construction and maintenance of thin retaining walls, the degree of developing of frictional forces in interlock connections of steel sheet U-shape piles essentially influences the realization of the values of geometric characteristics of the piles cross-section （the moment of inertia and the section modulus） reduced to the length unit of the construction. The article offers new and simple solutions for realization and economically effective technological approaches to provide joint work of the sheet piles being considered, which improve the adequacy of design and reliability of maintenance of thin retaining walls.

重庆官栈河大桥主桥主墩基础锁口钢管桩围堰加固

重庆官栈河大桥主桥为(62+110+62)m三跨连续刚构桥,主墩基础采用锁口钢管桩围堰施工。围堰施工正常水位+325.300 m,施工期控制水位+330.500 m。在该桥主墩围堰完成四周锁口钢管桩插打及前4道内支撑安装后,因极端天气原因,长寿湖水位上涨到+332.200 m,危及围堰安全。为解决钢管桩围堰的安全问题,提出采用水下施工内支撑的加固方案。待围堰内部水头与外部保持一致后,将已经插打的锁口钢管桩加高至标高+334.000 m,拆除已安装好的4道内支撑,重新安装6道内支撑。采用MIDAS Civil软件分别建立加固前、后钢管桩围堰结构有限元模型,分析钢管桩及内支撑的受力安全与稳定性。结果表明:施工控制水位+330.500 m下,围堰结构最大正应力由加固前的162.6 MPa下降到加固后的82.3 MPa,下降了49.3%;承载水位可从施工控制水位+330.500 m增加到目标控制水位+333.500 m,且强度和刚度等均留有一定储备。水下施工内支撑的加固方案可提升围堰的承载能力。该桥围堰加固后整体受力效果良好,已顺利完成承台浇筑施工。

嵌岩低桩承台锁口钢管桩围堰设计与施工技术

昌九高铁扬子洲赣江公铁大桥西支主桥为(48+144+320+144+48)m无砟轨道钢箱桁组合梁斜拉桥。桥塔墩位于通航河道内,桥位处河床覆盖层浅,基岩强度高,基础由大直径钻孔桩和矩形嵌岩低桩承台组成,承台采用锁口钢管桩围堰施工方案。G33号主墩围堰平面设计尺寸54.56 m×28.52 m,锁口钢管桩采用Q345B材质∅1020 mm螺旋钢管,长28 m,钢管桩之间采用C-T形锁扣连接;围堰设置4层内支撑,单层内支撑设3道对撑,内支撑四角设型钢斜撑;基底设置混凝土垫层参与围堰结构受力。围堰采用XR360旋挖钻机在岩层中引孔,孔内换填细砂后插打钢管桩,钢管桩壁内、外两侧换填砂采用高压旋喷注浆加固。围堰设置智能化监测系统,对围堰受力、变形等进行实时动态监控。实践证明,该桥围堰结构安全可靠、止水效果良好、施工快捷高效。

大倾角钢箱提篮拱桥总体设计

考虑施工技术、经济性和景观效果等方面,陕西蔡家坡渭河特大桥主桥采用(35+210+35) m大倾角钢箱提篮拱桥。该桥采用摩擦摆和环向钢丝绳阻尼支座综合减隔震约束体系,以降低结构的地震响应。拱肋为单室等宽钢箱截面,采用主、副拱肋2条悬链线,主、副拱肋共面,设计为横向内倾20°的大倾角,在提高桥梁景观效果的同时,又有效提高了结构的整体稳定性;拱肋设钢-混结合段连接拱脚与混凝土拱座。桥面系采用自重较轻的正交异性钢桥面板结构。吊杆采用抗拉强度1 860 MPa的环氧柔性钢绞线。基础采用Φ2.5 m的钻孔灌注群桩,以抵抗软弱地质条件下荷载的竖向及水平作用力。该桥总体采用先梁后拱的施工方案。整体及局部有限元分析结果表明,桥梁结构力学性能均满足规范要求,设计安全可靠。

循环荷载作用下钢桩-软黏土接触面剪切特性研究

目前,中国海上风电工程的建设已进入快速发展阶段。海上风电机常采用大直径钢管桩作为基础,然而现在的桩基承载力设计预测方法往往基于小直径柔性桩,不适用于大直径刚性桩。因此需要研究海上桩基桩-土界面的相互作用,来对海上大直径刚性桩基的设计预测方法进行优化。使用循环荷载作用下钢桩-软黏土大型接触面剪切试验数据,建立法向循环荷载作用下钢与黏性土接触面剪切试验的离散元模型,对各个细观参数进行标定,分别研究动荷载频率和幅值对剪切特性的影响,并进行了细观机理分析。数值模拟结果表明动荷载频率和幅值越大,钢与黏性土接触面强度越小,其中动荷载幅值的影响较为明显。通过细观机理分析可以发现:动荷载频率和幅值越大,接触面处黏性土的颗粒位移越小;静荷载下黏性土的颗粒间作用力大于动荷载下的颗粒间作用力;动荷载会导致颗粒间的扰动,从而使接触面强度减小。研究结果可以为海上风电桩基承载力的准确预测提供理论基础。

HUW组合钢板桩在软土地基深基坑工程中的 适应性分析

目的:本研究旨在分析HUW组合钢板桩在软土地基深基坑工程中的结构适应性,以期为相似地区深基坑工程提供理论支持。方法:基于某软土地区科技产业园深基坑工程,运用ABAQUS有限元软件,通过增量法模拟实际开挖过程,计算正常开挖下的结构变形和土体位移,从而分析HUW组合钢板桩在实际工程中的结构可行性。结果:随着基坑的逐层开挖,基坑边缘的沉降值逐步增大,尤其在软土地基条件下,地表沉降现象更为明显。针对6.3米深基坑的开挖,HUW组合钢板桩的最大水平位移为22.78毫米,符合基坑施工规范的要求。结论:HUW组合钢板桩在实际工程中具备可行性,可为类似工程提供理论参考。但土体受侧向约束的影响,在边界区域会形成局部隆起,因此需对边坡边缘进行加固处理。

特殊工况下大型通用门式起重机基础设计可靠性验算

某长江大桥建设工程设置了水上施工平台,用于布置一台180 t通用门式起重机,主要用来吊运钢箱。该起重机的基础较特殊,是全钢管柱架构的施工平台,且位于长江之上。为了确保起重机使用安全,对其基础设计进行了计算,并通过有限元建模,计算整体结构的强度,再对应力最大处的钢管进行稳定性验算,来验证起重机基础的安全性。

深基坑斜直交替钢管桩复合土钉墙数值模拟分析

依托福建某医院的基坑工程实例,采用数值模拟方法,研究斜直交替钢管桩复合土钉墙支护结构的变形特征及其稳定性。结果表明:坡面水平位移最大变形出现在基坑“腰部”,设计时应适当加强此位置的变形控制;斜直交替钢管桩复合土钉墙支护体系安全可行,其较双排直立钢管桩复合土钉墙及单一土钉墙有更好的变形控制能力和更高的稳定性。

格栅式钢板桩与桩筏基础集成的基坑支护技术

针对软土地质基坑工程,提出格栅式钢板桩与桩筏基础集成的基坑支护技术,通过设置纵向双排钢板桩与横向钢板桩或钢板组成格栅式钢板桩,以提高支护结构强度与刚度,并与桩筏基础协同工作,以解决结构下部软土层承载力较差的问题,并提高支护结构稳定性。以某管廊工程为依托,通过计算分析与技术对比,论证集成支护技术的安全性与可行性。

Simplified seismic fatigue evaluation for rigid steel connections

A simplified fatigue-life model is proposed for assessing the seismic inelastic rotational capacity of steel connections.First relations are developed for rigid steel connections under lateral loading.Next this is extended to account for the effects of the welded steel moment frame(WSMF)connections of the so-called pre-Northridge type.The seismic fatigue theory is validated against experimental results.The experiments were conducted under increasing ductility amplitudes until the onset of fiacture.Miner'rule was used to convert the test results to given an equivalent constant amplitude cyclic fatigue life.Satisfactory agreement is obtained when comparing the experimental observations with the theoretical predictions.

装配式双拼钢围檩的拼接节点承载性能研究

结合某下穿通道基坑开挖的装配式钢结构支护体系,对双拼钢围檩拼接节点及相关组合桩和支撑进行现场测试,获取围檩承担的荷载数据,进而建立有限元分析模型。对比有限元计算值与实测值,分析拼接节点的承载性能。结果表明,依据等值梁法所得的组合桩内力可以用于围檩的荷载计算;拼接节点的有限元计算结果与现场监测数据较吻合,可为装配式双拼钢围檩的应用提供参考。