The local design and construction practices in the United Arab Emirates （UAE）, together with Dubai＇s unique rate of development, warrant special attention to the selection of Lateral Force-Resisting Systems （LFRS...The local design and construction practices in the United Arab Emirates （UAE）, together with Dubai＇s unique rate of development, warrant special attention to the selection of Lateral Force-Resisting Systems （LFRS）. This research proposes four different feasible solutions for the selection of the LFRS for tall buildings and quantifies the impact of these selections on seismic performance and cost. The systems considered are： Steel Special Moment-Resisting Frame （SMRF）, Concrete SMRF, Steel Dual System （SMRF with Special Steel Plates Shear Wall, SPSW）, and Concrete Dual System （SMRF with Special Concrete Shear Wall, SCSW）. The LFRS selection is driven by seismic setup as well as the adopted design and construction practices in Dubai. It is found that the concrete design alternatives are consistently less expensive than their steel counterparts. The steel dual system is expected to have the least damage based on its relatively lesser interstory drifts. However, this preferred performance comes at a higher initial construction cost. Conversely, the steel SMRF system is expected to have the most damage and associated repair cost due to its excessive flexibility. The two concrete alternatives are expected to have relatively moderate damage and repair costs in addition to their lesser initial construction cost.展开更多
The effects o f important parameters (beam reinforcing plates, initial post-tensioning, and material properties o f steel angles) on the behavior o f hexagonal castellated beams in post-tensioned self-centering (PTSC)...The effects o f important parameters (beam reinforcing plates, initial post-tensioning, and material properties o f steel angles) on the behavior o f hexagonal castellated beams in post-tensioned self-centering (PTSC) connections undergone cyclic loading up to 4% lateral drift have been investigated by finite element (FE) analysis using ABAQUS. The PTSC connection is comprised o f bolted top and bottom angles as energy dissipaters and steel strands to provide self-centering capacity. The FE analysis has also been validated against the experimental test. The new formulations derived from analytical method has been proposed to predict bending moment o f PTSC connections. The web-post buckling in hexagonal castellated beams has been identified as the dominant failure mode when excessive initial post-tensioning force is applied to reach greater bending moment resistance, so it is required to limit the highest initial post-tensioning force to prevent this failure. Furthermore, properties o f steel material has been simulated using bilinear elastoplastic modeling with 1.5% strain-hardening which has perfectly matched with the real material of steel angles. It is recommended to avoid using steel angles with high yielding strength since they lead to the yielding o f bolt shank. The necessity o f reinforcing plates to prevent beam flange from local buckling has been reaffirmed.展开更多
Investigating progressive collapse of tall structures under beam removal scenarios after earthquake is a complex subject because the earthquake damage acts as an initial condition for the subsequent scenario. An inves...Investigating progressive collapse of tall structures under beam removal scenarios after earthquake is a complex subject because the earthquake damage acts as an initial condition for the subsequent scenario. An investigation is performed here on a 10 story steel moment resisting structure designed to meet the life safety level of performance when different beam removal scenarios after earthquake are considered. To this end, the structure is first subjected to the design earthquake simulated by Tabas earthquake acceleration. The beam removal scenarios are then considered at different locations assuming that both ends connections of the beam to columns are simultaneously detached from the columns;thus the removed beam falls on the underneath floor with an impact. This imposes considerable loads to the structure leading to a progressive collapse in all the scenarios considered. The results also show that the upper stories are much more vulnerable under such scenarios than the lower stories. Hence, more attention shall be paid to the beam-to-column connections of the upper stories during the process of design and construction.展开更多
文摘The local design and construction practices in the United Arab Emirates （UAE）, together with Dubai＇s unique rate of development, warrant special attention to the selection of Lateral Force-Resisting Systems （LFRS）. This research proposes four different feasible solutions for the selection of the LFRS for tall buildings and quantifies the impact of these selections on seismic performance and cost. The systems considered are： Steel Special Moment-Resisting Frame （SMRF）, Concrete SMRF, Steel Dual System （SMRF with Special Steel Plates Shear Wall, SPSW）, and Concrete Dual System （SMRF with Special Concrete Shear Wall, SCSW）. The LFRS selection is driven by seismic setup as well as the adopted design and construction practices in Dubai. It is found that the concrete design alternatives are consistently less expensive than their steel counterparts. The steel dual system is expected to have the least damage based on its relatively lesser interstory drifts. However, this preferred performance comes at a higher initial construction cost. Conversely, the steel SMRF system is expected to have the most damage and associated repair cost due to its excessive flexibility. The two concrete alternatives are expected to have relatively moderate damage and repair costs in addition to their lesser initial construction cost.
文摘The effects o f important parameters (beam reinforcing plates, initial post-tensioning, and material properties o f steel angles) on the behavior o f hexagonal castellated beams in post-tensioned self-centering (PTSC) connections undergone cyclic loading up to 4% lateral drift have been investigated by finite element (FE) analysis using ABAQUS. The PTSC connection is comprised o f bolted top and bottom angles as energy dissipaters and steel strands to provide self-centering capacity. The FE analysis has also been validated against the experimental test. The new formulations derived from analytical method has been proposed to predict bending moment o f PTSC connections. The web-post buckling in hexagonal castellated beams has been identified as the dominant failure mode when excessive initial post-tensioning force is applied to reach greater bending moment resistance, so it is required to limit the highest initial post-tensioning force to prevent this failure. Furthermore, properties o f steel material has been simulated using bilinear elastoplastic modeling with 1.5% strain-hardening which has perfectly matched with the real material of steel angles. It is recommended to avoid using steel angles with high yielding strength since they lead to the yielding o f bolt shank. The necessity o f reinforcing plates to prevent beam flange from local buckling has been reaffirmed.
文摘Investigating progressive collapse of tall structures under beam removal scenarios after earthquake is a complex subject because the earthquake damage acts as an initial condition for the subsequent scenario. An investigation is performed here on a 10 story steel moment resisting structure designed to meet the life safety level of performance when different beam removal scenarios after earthquake are considered. To this end, the structure is first subjected to the design earthquake simulated by Tabas earthquake acceleration. The beam removal scenarios are then considered at different locations assuming that both ends connections of the beam to columns are simultaneously detached from the columns;thus the removed beam falls on the underneath floor with an impact. This imposes considerable loads to the structure leading to a progressive collapse in all the scenarios considered. The results also show that the upper stories are much more vulnerable under such scenarios than the lower stories. Hence, more attention shall be paid to the beam-to-column connections of the upper stories during the process of design and construction.
