Seismic Response Analysis of Steel Structure Isolation System Under Long-Period Seismic Motion

To analyze the seismic response of steel structure isolation systems under long-period seismic motion,a 9-story steel frame building was selected as the subject.Five steel structure finite element models were established using SAP2000.Response spectrum analysis was conducted on the seismic motion to determine if it adhered to the characteristics of long-period seismic motion.Modal analysis of each structural model revealed that the isolation structure significantly prolonged the structural natural vibration period and enhanced seismic performance.Base reactions and floor displacements of various structures notably increased under long-period seismic motion compared to regular seismic activity.Placing isolation bearings in the lower part of the structure proved more effective under long-period seismic motion.In seismic design engineering,it is essential to consider the impact of long-period seismic motion on structures and the potential failure of isolation bearings.

Analysis of Soundproof Technology of Assembled Steel Structure Houses

The problem of noise has always been highlighted in assembled steel structure houses.Therefore,it is necessary to use effective soundproof measures where steel beams intersect with the reserved line pipe openings,doors,windows,elevator shafts,and other locations.In this paper,we will investigate the areas with subpar soundproof performance in an assembled steel structure residential project and propose suitable noise control measures to address this issue.

Laser cleaning of steel structure surface for paint removal and repaint adhesion

Paint removal from steel structure is executed for shipyards of marine and offshore engineering.Due to environmental unfriendliness and unhealthy drawbacks of sand blasting technique, laser ablation technique is proposed as a substituting method.By absorbing high energy of the 1064 nm pulsed laser, the paint is vaporized quickly.The ablated debris is then collected by using a suction pump.Initial metal surface of the steel is exposed when laser beam irradiates perpendicularly and scans over it.The cleaned surface fulfills the requirements of surface preparation standards ISO 8501 of SA2.The adhesion is further characterized with pull-off test after carrying out painting with Jotamastic 87 aluminum paint.The repainting can be embedded onto the laser cleaned surface to bond much more tightly.The excellent adhesion strength of 20 MPa between repainted coating and the substrate is achieved, which is higher than what is required by shipyards applications.

Methodology to Estimate Remaining Service Life of Steel Structure by Possibilistic Reliability Theory

Steel structure system of crane deteriorates over time due to environmental effects, material fatigue, and overloading. System structural reliability and remaining service life assessment methods are developed during the few decades. But until now estimating remaining service life methods of crane steel system by reliability theory begin to develop. Safety assessment of existing steel structure system requires the development of a methodology that allows for an accurate evaluation of reliability and prediction of the remaining life. Steel structures are the supporting elements in the special equipment such as hoisting machinery. Structure reliability and remaining service life safe assessment are important for steel structures. For finding the reason which caused the failure modes （such as fatigue strength failure, stiffness failure and stability failure）, incremental loading method based on possibilistic reliability is applied into dynamic structure failure path research. Through reliability analyzing and calculating for crane, it is demonstrated that fatigue damage is the most common failure mode. Fuzzy fatigue damage accumulation theory is used for basis theory and Paris-Eadogan equations are used for mathematical modeling. All fatigue parameter values of the welding box girder of bridge cranes are determined and fatigue remaining life formulas are deduced. After field test and collecting working parameters of numerous cranes, typical fatigue load spectrum was compiled for the dangerous point of box girders used in the area. Fatigue remaining life is assessed for different types and lifting capacities. Safety for steel structure system of bridge crane is assessed by two quantitative indexs： reliability and remaining life. Therefore, the evaluation means is more comprehensive and reasonable. The example shows that the two quantitative indexs are mutually correlated. Through analyzing the 120 t-22.5 m bridge crane of a certain enterprise, a new methodology to estimate remaining service life of steel structure by possibilistic reliability theory is introduced for safety evaluation of structure system.

Integrity Design Strategy in Steel Structure Bridge Design

Nowadays,the scope of bridge construction projects in China is becoming wider,which promotes China's economic development to a large extent and also improves China's transportation system.Meanwhile,people also put forward new requirements for the quality of steel structure bridges.However,in actual design,due to the influence of many fectors,some problems are inevitable,which will affect the integrity of the design.Therefore,the designer needs to fully grasp the possible design problems,and then take efiective measures to improve the integrity of the design scheme,so as to ensure the quality of the steel structure bridge and improves the safety of the steel structure bridge from the fundamentals.This paper mainly focuses on steel structure bridges,analyzed the current status of steel structure bridge types and their selection,and proposes the integrity design strategy of steel structure bridges.

Effect of Perlite on Fire Protection of Waterborne Coatings for Steel Structure

In this paper, perlite was used as a kind of modifier to prepare waterborne fire resistive coatings for steel structure. The influence of perlite on the properties of the fire resistive coatings was investigated with the help of thermogravimetric analysis (TGA), micro-scale combustion calorimetry (MCC) and fire protection test. The TGA results showed that the char residue weight of the coatings was increased when perlite was loaded and the anti-oxidation performance was enhanced as well and MCC data indicated the addition of perlite reduced the peak heat release rate and total heat release. After the fire protection test, the results confirmed that the fire resistant time of the coating coated with 5 wt% perlite increased up to 114.4 min when the temperature of the sample boards’ backside reached 500?C.

The Construction Technology of Freeform Surface Spatial Bending-Torsion Steel Structure

Taking the construction project of the National Cybersecurity Talents and Innovation Base as an example,this paper studies the construction technology of freeform surface spatial bending-torsion steel structure based on structural design model transformation,including the parametric modeling of deepening design model,computer-aided bending and torsion frame production,flexible docking in the bending-torsion combination unit,and welding stress deformation,in hope to provide reference for similar projects in the future.

EXPERIMENTAL STUDY ON ELASTIC－PLASTIC CONTROLLING DESIGN FOR BOX STEEL STRUCTURES

The principle of increasing structural loading abillity by the using of elastic-plastic con- trolling design, which can make steel reach a highcr yield slrength through controlling undue strains produced in loaded box steel structures and no damager to the static mechanical properties of the used materials, is dealt with under the guarantee of strength, rigidity, and stability. A new idea of elastic--plastic controlling design, which is mainly based on the elastic-plastic theory and experi- mental results and is different from the current design which is mainly based handbooks and design- er' s experience, is established. That is: the loading time and its effect on loaded structures are con- sidered, and the potential strength in used matcrials is fully utilized through the controlling of struc- tural strains in design. By the using of this design method, the weight and cost of box structures will be reduced in large amount.

Fault Identification for Shear-Type Structures Using Low-Frequency Vibration Modes

Shear-type structures are common structural forms in industrial and civil buildings,such as concrete and steel frame structures.Fault diagnosis of shear-type structures is an important topic to ensure the normal use of structures.The main drawback of existing damage assessment methods is that they require accurate structural finite element models for damage assessment.However,for many shear-type structures,it is difficult to obtain accurate FEM.In order to avoid finite elementmodeling,amodel-freemethod for diagnosing shear structure defects is developed in this paper.This method only needs to measure a few low-order vibration modes of the structure.The proposed defect diagnosis method is divided into two stages.In the first stage,the location of defects in the structure is determined based on the difference between the virtual displacements derived from the dynamic flexibility matrices before and after damage.In the second stage,damage severity is evaluated based on an improved frequency sensitivity equation.Themain innovations of this method lie in two aspects.The first innovation is the development of a virtual displacement difference method for determining the location of damage in the shear structure.The second is to improve the existing frequency sensitivity equation to calculate the damage degree without constructing the finite elementmodel.Thismethod has been verified on a numerical example of a 22-story shear frame structure and an experimental example of a three-story steel shear structure.Based on numerical analysis and experimental data validation,it is shown that this method only needs to use the low-order modes of structural vibration to diagnose the defect location and damage degree,and does not require finite element modeling.The proposed method should be a very simple and practical defect diagnosis technique in engineering practice.

Discussion on Construction Technology and Welding Deformation of High-Rise Steel Frame Structure

Because of urbanization,land resources in China’s cities has become increasingly scarce.Therefore,modern buildings are becoming taller,making high-rise steel frame structures the new favorite of the construction industry.However,the construction of high-rise steel frame structures requires advanced technology.If the construction technology is effectively implemented and the welding techniques of the construction personnel align with the requirements for high-rise steel frame structures,it can help mitigate deformations in the steel structure,thus preserving the overall construction quality of high-rise steel frame structures.To enhance the applicability of steel frame structures in high-rise buildings,this paper focuses on analyzing the optimization path for the construction process of high-rise steel frame structures.It introduces a tailored approach to control welding-induced deformations in steel frame structures,aiming to make a valuable contribution to the advancement of China’s construction industry.

Seismic analysis of a super high-rise steel structure with horizontal strengthened storeys

Horizontal strengthened storeys are widely used in super high-rise steel structures to improve the lateral structural rigidity.This use has great effects on the seismic properties of the entire structure.The seismic properties of the Wuhan International Securities Building (a 68-storey super high-rise steel structure with three horizontal strengthened storeys) were evaluated in this study.Two approaches,i.e.,mode-superposition response spectrum analysis and time-history analysis,were employed to calculate the seismic response of the structure.The response spectrum analysis indicated that transition parts near the three strengthened storeys were weak zones of the structure because of the abrupt change in rigidity.In the response spectrum analysis approach,the Square Root of Sum of Square (SRSS) method was recommended when the vertical seismic effects could be ignored.However,the complete quadratic combination (CQC) method was superior to SRSS method when the vertical seismic effects should be considered.With the aid of time-history analysis,the seismic responses of the structure were obtained.The whiplash effect that spectrum analysis cannot reveal was observed through time-history analysis.This study provides references for the seismic design of super high-rise steel structures with horizontal strengthened storeys.

Preliminary investigation of seismic damage to two steel space structures during the 2013 Lushan earthquake

Severe damage to steel space structures is rarely reported when compared to other structural systems damaged during past major earthquakes around the world. Two gymnasiums of steel space structures in downtown Lushan County that were damaged during the 2013 M7.0 Lushan earthquake in China were investigated and the observations are summarized in this paper. Typical damage to these two steel space structures ranges from moderate to severe. Moderate damage includes global buckling and dislocation of bolted connections of truss members, and inelastic elongation of anchor bolts and sliding of pedestal plates of supports. Severe damage includes member fracture caused by local buckling, and fracture failure of anchor bolts and welds. The distribution of structural damage to these two structures is described in detail and future research opportunities are suggested.

MICROSTRUCTURE TRANSFORMATION IN THE WELDING HEAT AFFECTED ZONE OF 800MPa GRADE ULTRA FINE STRUCTURED STEEL

The transformation behavior and microstructure development in the heat affected zone(HAZ) of 800MPa grade ultra fine structured steel was investigated. It was found thatthe HAZ has intermediate temperature transformation characteristics in a wide rangeof cooling rates, with the bainite sheaves consisting of bainite ferrite plates withoutcarbide precipitation and retained austenite in the fast cooling regime. At relativelyhigh cooling rates, which corresponded to low heat inputs, the hardness of the simulatedHAZ was above that of the base metal. When the cooling rate was below 9℃/s, thewelding HAZ would have an obvious softening. The analysis of transformation ratesin continuous cooling processes was completed by numerical differential method. Theresult indicated that the microstructure transformation rate of the HAZ in 800MPagrade ultra fine structured steel changed sharply to slow speeds when the cooling timet_(8/5) is longer than 7s.

Effect of grain boundary sliding on the toughness of ultrafine grain structure steel: A molecular dynamics simulation study

Molecular dynamics simulations are carried out to investigate the mechanisms of low-temperature impact toughness of the ultrafine grain structure steel. The simulation results suggest that the sliding of the {001 }/{ 110} type and { 110}/{ 111 } type grain boundary can improve the impact toughness. Then, the mechanism of grain boundary sliding is studied and it is found that the motion of dislocations along the grain boundary is the underlying cause of the grain boundary sliding. Finally, the sliding of the grain boundary is analyzed from the standpoint of the energy. We conclude that the measures which can increase the quantity of the {001}/{110} type and {110}/{ 111} type grain boundary and elongate the free gliding distance of dislocations along these grain boundaries will improve the low-temperature impact toughness of the ultrafine grain structure steel.

Selection and modification of ground motion records using Newmark-Hall spectrum as target spectrum for long-period structures

Input ground motions have significant impacts on the uncertainty of structural responses in time-history analysis.In this study,records were selected and scaled for the evaluation of mean structural responses according to the target spectrum.The Newmark-Hall spectrum is closely related to seismic response of short,medium and long-period structures,so it was taken as the target spectrum here.The nonlinear time-history analyses of 9-story and 20-story steel moment-resisting frame structures were carried out as examples.They represent medium and long-period buildings,respectively.Three target spectra with risk of 50%,10%and 2%probabilities for exceedance in 50 years were calculated by the average Newmark-Hall spectrum method for three ground motion sets developed in the SAC Steel Project.The predicted structural mean responses of these Newmark-Hall spectra were compared with those calculated by the average spectral acceleration method for the same record set.It is found that both methods have similar accuracy for estimating the structural mean response.However,the method proposed herein is more effective in reducing the variability of the structural responses.Also,the proposed method is more advantageous for the time-history analysis of long-period structures or structures with more severe nonlinear responses under strong seismic excitations.

STUDY ON DISLOCATION STRUCTURES IN WELDED METALS UNDER FATIGUE LOAD

With transmission electron microscope, it has been observed and analyzed that the dislocation arrangements and the fatigue damage of eutectoid present in welded metals which are loaded at different fatigue loads and load cycles. The results indicated that the character of fatigue damage in ferrites of welded metals is the dislocation arrangement change and eutectoids of welded metals are the broken cementites. This may produce microcracks.

Experimental Study on Flexural Behavior of Corroded Channel Steel Beams

In order to study the mechanical behavior of corroded channel steel beam,experiment on five corroded channel steel beams is carried out. Test results show that the bending failures may occur under the ultimate load carrying capacity of members,compared with the calculating results of non-corrosion channel steel beam,and the bearing capacity of corroded channel steel beam is reduced,while the deflection is increased. With the increase of shear-span ratio,the bearing capacity of corroded channel steel beam reduces and the deflection increases gradually; with the increment of heightspan ratio, the bearing capacity increases and the deflection decreases gradually; with the enhancement of width-height ratio,the bearing capacity reduces and the deflection-span ratio increases gradually. The measured results indicate that the load-deflection relationship curves of corroded channel steel beam may be divided into four sections: the exfoliated rust layer stage,the elastic stage,the yielding stage and the descending stage. The load-strain relationship curves include two sections: the elastic stage and the yielding stage. The strain measurement of web proves that the average strains agree well with the assumption of plane section. This paper could provide some scientific bases for the maintenance and reinforcement of the corroded steel structure.

Fatigue Test of Homemade Z Direction Steel Welded T Tubular Joints

This paper introduces the process and result of fatigue test of steel (Z direction steel) welded T tubular joints used in offshore engineering. Detailed measurement of stress concentration factor, stress distribution, fatigue life and crack development has been performed. Through analysis, an empirical formula of stress concentration factor for T tubular joints, fatigue S-N curve and crack propagation rule are obtained.

Double⁃Shear Experiments of Cold⁃Formed Steel Stud⁃to⁃Sheathing Connections at Elevated Temperatures

The behavior of cold⁃formed steel(CFS)stud⁃to⁃sheathing connections at elevated temperatures is an important parameter for the fire resistance design and modeling of mid⁃rise CFS structures.In this paper,three kinds of sheathings,namely,medium⁃and low⁃density calcium⁃silicate boards and oriented strand board,were selected for double⁃shear experiments on the mechanical properties of 253 screw connections at ambient and elevated temperatures.The effects of the shear direction,screw edge distance and the number of screws on the behavior of the connections were studied.The results showed that the shear direction and the screw edge distance more significantly influenced the peak deformation,while their impacts on the peak load varied with the type of sheathings.Compared with the single⁃screw connections,the peak loads of the specimens with double⁃screw connections obviously increased but did not double.Finally,a simplified load⁃displacement curve model of stud⁃to⁃sheathing connections at elevated temperature was generated first by establishing the prediction formula for characteristic parameters,such as the peak load,the peak deformation and the elastic stiffness,and then by considering whether the curves corresponded to stiffness increase phenomena.The present investigation provides basic data for future studies on the numerical modeling of CFS structures under fire conditions.

Information Construction Technology of Free-Form Surface Steel Grid

Taking the construction project of National Network Security Talents and Innovation Base Exhibition Center as an example,the application of building information model in the construction process of free-form surface steel structure is analyzed in this paper.The results show that the application of Building Information Modeling(BIM)technology to the construction of free-form surface structure improves the work efficiency of the construction team in multi-disciplinary collaboration,surface component manufacturing,and construction process design,and subsequently improves the construction speed and construction quality.