The effect of ground steel-making slag on microstructure and composition of hydration products of ordinary Portland cement (OPC) was investigated by mercury intrusion porosimetry (MIP),X-ray diffraction (XRD) and diff...The effect of ground steel-making slag on microstructure and composition of hydration products of ordinary Portland cement (OPC) was investigated by mercury intrusion porosimetry (MIP),X-ray diffraction (XRD) and differential thermal analysis (DTA).Results show that ground steel-making slag is a kind of high activity mineral additives and it can raise the longer-age strength of OPC mortar.The total porosity and average pore diameter of OPC paste with ground steel-making slag increase with the increase of the amount of ground steel-making slag replacing OPC at various ages,while after 28 days most pores in OPC paste with ground steel-making slag do not influence the strength because the diameter of those pores is in the rang of 20 to 50nm.The hydration mechanism of ground steel-making slag is similar to that of OPC but different from that of fly ash and blast furnace slag.The hydration products of ground steel-making slag contain quite a lot of Ca(OH) 2 in long age.展开更多
Steel-making and continuous/ingot casting are the key processes of modern iron and steel enterprises. Bilevel programming problems(BLPPs) are the optimization problems with hierarchical structure. In steel-making prod...Steel-making and continuous/ingot casting are the key processes of modern iron and steel enterprises. Bilevel programming problems(BLPPs) are the optimization problems with hierarchical structure. In steel-making production, the plan is not only decided by the steel-making scheduling, but also by the transportation equipment.This paper proposes a genetic algorithm to solve continuous and ingot casting scheduling problems. Based on the characteristics of the problems involved, a genetic algorithm is proposed for solving the bilevel programming problem in steel-making production. Furthermore, based on the simplex method, a new crossover operator is designed to improve the efficiency of the genetic algorithm. Finally, the convergence is analyzed. Using actual data the validity of the proposed algorithm is proved and the application results in the steel plant are analyzed.展开更多
To research the possibility of steel-making dust as a kind of mineral filler in asphalt mixture, two steel-making dusts and one ordinary mineral filler were adopted. The specific density, specific surface area, finene...To research the possibility of steel-making dust as a kind of mineral filler in asphalt mixture, two steel-making dusts and one ordinary mineral filler were adopted. The specific density, specific surface area, fineness modulus and mineralogy component of the dusts were tested. Scanning electron microscopy(SEM) was carried out to research the microstructure of the dusts; dynamic shear rheological(DSR) test and time sweep test were used to research the high temperature and fatigue performance of asphalt mortars containing steel-making dust. The experimental results indicate that, compared with ordinary mineral filler, steel-making dusts have more active ingredients, difference surface characteristics and micro-structure. Furthermore, the high temperature and fatigue performance of steel-making dusts corresponding asphalt mortars are superior to those of reference group. Therefore, the steel-making dust would be an alternative to the ordinary mineral filler to improve the performance of asphalt mortars and reduce the harm of the dusts to the environment at the same time.展开更多
Based on the refractories research of Baosteel, the demands for refractories from the developing steel-making technology as high security, high efficiency, energy saving and environment .friendly are introduced.
A cement factory nearby communities raise pollution concerns. This study assessed air pollution levels for respirable particulate matter (PM2.5 and PM10) and heavy metals (lead, chromium, nickel, cadmium, zinc and cop...A cement factory nearby communities raise pollution concerns. This study assessed air pollution levels for respirable particulate matter (PM2.5 and PM10) and heavy metals (lead, chromium, nickel, cadmium, zinc and copper) adjacent to a cement factory in Ewekoro and neighbouring communities (Papalantoro, Lapeleko and Itori) in Ogun State, Nigeria. Respirable particulate matter (PM2.5 and PM10) and heavy metals were measured using an ARA N-FRM cassette sampler. Each location sampled was monitored for eight continuous hours daily for 12 days. The PM2.5, PM10 and heavy metals results were compared with different standards, including those of the World Health Organization (WHO), Nigeria’s National Environmental Standard and Regulation Enforcement Agency (NESREA) and Canadian Ambient Air Quality Standards (CAAQS). The PM levels fell within 11 - 19 μg/m3 of the air management level of CAAQS, which signifies continuous actions are needed to improve air quality in the areas monitored but below the NESREA standard. The mean Cd, Cr and Ni concentrations in the cement factory area and the impacted neighbourhoods are higher than the WHO/EU permissible limits, while Zn and Cu were below the WHO/EU permissible limit. A risk assessment hazard quotient (HQ) for Cr was above the WHO/EU safe level (=1) in adults and children throµgh ingestion, inhalation and dermal contact at all the monitoring sites. The HQ for Ni and Cd was higher than the safe level in the cement factory area and Papalantoro, while Zn was at safe levels.展开更多
After an intensive few years of development,ACG Kinna Automatic and ACG Nystrom–members of TMAS,the Swedish textile machinery association–have delivered the first microfactory for the production of fully finished fi...After an intensive few years of development,ACG Kinna Automatic and ACG Nystrom–members of TMAS,the Swedish textile machinery association–have delivered the first microfactory for the production of fully finished filter bags to a major international filtration industry customer,in cooperation with JUKI Central Europe.展开更多
Objective:This study aimed to examine the causal model of eating behaviors among pregnant women working in industrial factories.Methods:This cross-sectional study was conducted on 210 participants,attending 4 healthca...Objective:This study aimed to examine the causal model of eating behaviors among pregnant women working in industrial factories.Methods:This cross-sectional study was conducted on 210 participants,attending 4 healthcare centers,at a tertiary care hospital in Chonburi province,Thailand.Data were collected using 7 questionnaires:demographic form,eating behavior questionnaire,perceived benefits of the healthy eating questionnaire,perceived barriers to the healthy eating questionnaire,perceived self-efficacy questionnaire,social support questionnaire,and accessibility to healthy foods questionnaire.Descriptive statistics and path analysis were used for data analysis.Results:The participants had relatively high mean scores for eating behaviors.The final model fitted well with the dataχ^(2)=12.86,df=10,P=0.23;χ^(2)/df=1.29;comparative fit index(CFI)=0.98;goodness-of-fit index(GFI)=0.98;adjusted goodness-of-fit index(AGFI)=0.95;root mean square error of approximation(RMSEA)=0.04.Four factors-perceived benefits(β=0.13,P<0.05),perceived self-efficacy in healthy eating(β=0.22,P<0.001),pregnancy planning(β=0.28,P<0.001),and accessibility to healthy foods in the factory(β=0.12,P<0.05)-positively affected eating behavior,while only perceived barriers to healthy eating had a negative effect on eating behavior(β=−0.24,P<0.001).All the above factors explained 27.2%of the variance in eating behaviors.Conclusions:Nurses or healthcare providers can apply these findings to create an eating behavior modification program,focusing on pregnancy planning,behavior-specific variables,and interpersonal and situational influence,to promote the nutritional status of pregnant women working in industrial factories.展开更多
Renovation design of wasteland on the original Quarter A of Panzhihua Nongnongping Steelcasting Factory was taken for example in this study, natural conditions and biological landscapes in the study area were investig...Renovation design of wasteland on the original Quarter A of Panzhihua Nongnongping Steelcasting Factory was taken for example in this study, natural conditions and biological landscapes in the study area were investigated. Principles and theories of the renovation design were introduced, it was proposed that protection and landscape renovation of industrial heritage had to be insisted to make regular and unique overall spatial layouts. On this basis, design approaches for the wasteland landscape renovation of the steel-casting factory were proposed as "maintaining original images, realizing the functional substitution; optimizing spatial structure; updating seriously-damaged industrial facilities with insignificant functionality; improving and recovering landscape soil; recovering and reconstructing vegetation".展开更多
[Objective] The aim was to explore the biological effect of low energy ion beam mediated parameters with fractional factorial design method. [Method] The twin-embryos seed of autotetraploid rice DER10-04-01 was taken ...[Objective] The aim was to explore the biological effect of low energy ion beam mediated parameters with fractional factorial design method. [Method] The twin-embryos seed of autotetraploid rice DER10-04-01 was taken as the receptor material,and the Elymus dahuricus Turcz. was used as materials to provide DNA to carry out the ion beam mediated experiment. And the fractional factorial design method was used to study the parameters of low enery N＋ ion beam mediated foreign genes into rice. [Result] The implantation energy,dose,DNA concentrations and immersion time of DNA showed significant biological effects on the normal growth and development of DER10-04-01,in which the biological effects of implantation dose and DNA concentrations were relatively obvious. [Conclusion] The implantation energy,dose,DNA concentrations and immersion time of DNA were major factors showing important effects on the experimental result in ion beam mediated foreign genetic materials.展开更多
Objective: To understand the HIV/AIDS-related knowledge, attitudes and behaviors (KAB) among immigrant female factory workers(IFFW). Methods: A cross-sectional study was conducted among IFFWs sampled from several join...Objective: To understand the HIV/AIDS-related knowledge, attitudes and behaviors (KAB) among immigrant female factory workers(IFFW). Methods: A cross-sectional study was conducted among IFFWs sampled from several joint- venture and private factories in Dongguan city. Results: Out of 175 sampled workers, 165 qualified for inclusion and the median age was 22. The results showed that the IFFWs had low levels of knowledge about HIV/AIDS, and held many misconceptions. Thirty three of 76 (43.4%) unmarried IFFWs had premarital sexual contact, and more than half of these contacts were one-night stands (54.5%) . More than one quarter of the women(25.9%) never used condoms, 49.4% sometimes used condoms and 24.7% used condoms every time. Twenty-eight women (31.8%) had an induced abortion because of an unexpected pregnancy. Fourteen (14.9%) had been infected with STDs, and four IFFWs(2.8%)had tried drugs before the interview. Conclusion: In order to empower the IFFWs in the city to protect themselves from HIV, and to contain the rapid spread of HIV in our province, targeted HIV/ AIDS health promotion programs should be urgently implemented among IFFWs in Dongguan city. The programs should be designed to improve the knowledge of HIV, to promote condom use, and to reduce risky behaviors.展开更多
文摘The effect of ground steel-making slag on microstructure and composition of hydration products of ordinary Portland cement (OPC) was investigated by mercury intrusion porosimetry (MIP),X-ray diffraction (XRD) and differential thermal analysis (DTA).Results show that ground steel-making slag is a kind of high activity mineral additives and it can raise the longer-age strength of OPC mortar.The total porosity and average pore diameter of OPC paste with ground steel-making slag increase with the increase of the amount of ground steel-making slag replacing OPC at various ages,while after 28 days most pores in OPC paste with ground steel-making slag do not influence the strength because the diameter of those pores is in the rang of 20 to 50nm.The hydration mechanism of ground steel-making slag is similar to that of OPC but different from that of fly ash and blast furnace slag.The hydration products of ground steel-making slag contain quite a lot of Ca(OH) 2 in long age.
基金Supported by the Educational Commission of Liaoning Province Science and Technology Research Projects(L2013237)
文摘Steel-making and continuous/ingot casting are the key processes of modern iron and steel enterprises. Bilevel programming problems(BLPPs) are the optimization problems with hierarchical structure. In steel-making production, the plan is not only decided by the steel-making scheduling, but also by the transportation equipment.This paper proposes a genetic algorithm to solve continuous and ingot casting scheduling problems. Based on the characteristics of the problems involved, a genetic algorithm is proposed for solving the bilevel programming problem in steel-making production. Furthermore, based on the simplex method, a new crossover operator is designed to improve the efficiency of the genetic algorithm. Finally, the convergence is analyzed. Using actual data the validity of the proposed algorithm is proved and the application results in the steel plant are analyzed.
基金Funded by the National Natural Science Foundation of China(51778482)
文摘To research the possibility of steel-making dust as a kind of mineral filler in asphalt mixture, two steel-making dusts and one ordinary mineral filler were adopted. The specific density, specific surface area, fineness modulus and mineralogy component of the dusts were tested. Scanning electron microscopy(SEM) was carried out to research the microstructure of the dusts; dynamic shear rheological(DSR) test and time sweep test were used to research the high temperature and fatigue performance of asphalt mortars containing steel-making dust. The experimental results indicate that, compared with ordinary mineral filler, steel-making dusts have more active ingredients, difference surface characteristics and micro-structure. Furthermore, the high temperature and fatigue performance of steel-making dusts corresponding asphalt mortars are superior to those of reference group. Therefore, the steel-making dust would be an alternative to the ordinary mineral filler to improve the performance of asphalt mortars and reduce the harm of the dusts to the environment at the same time.
文摘Based on the refractories research of Baosteel, the demands for refractories from the developing steel-making technology as high security, high efficiency, energy saving and environment .friendly are introduced.
文摘A cement factory nearby communities raise pollution concerns. This study assessed air pollution levels for respirable particulate matter (PM2.5 and PM10) and heavy metals (lead, chromium, nickel, cadmium, zinc and copper) adjacent to a cement factory in Ewekoro and neighbouring communities (Papalantoro, Lapeleko and Itori) in Ogun State, Nigeria. Respirable particulate matter (PM2.5 and PM10) and heavy metals were measured using an ARA N-FRM cassette sampler. Each location sampled was monitored for eight continuous hours daily for 12 days. The PM2.5, PM10 and heavy metals results were compared with different standards, including those of the World Health Organization (WHO), Nigeria’s National Environmental Standard and Regulation Enforcement Agency (NESREA) and Canadian Ambient Air Quality Standards (CAAQS). The PM levels fell within 11 - 19 μg/m3 of the air management level of CAAQS, which signifies continuous actions are needed to improve air quality in the areas monitored but below the NESREA standard. The mean Cd, Cr and Ni concentrations in the cement factory area and the impacted neighbourhoods are higher than the WHO/EU permissible limits, while Zn and Cu were below the WHO/EU permissible limit. A risk assessment hazard quotient (HQ) for Cr was above the WHO/EU safe level (=1) in adults and children throµgh ingestion, inhalation and dermal contact at all the monitoring sites. The HQ for Ni and Cd was higher than the safe level in the cement factory area and Papalantoro, while Zn was at safe levels.
文摘After an intensive few years of development,ACG Kinna Automatic and ACG Nystrom–members of TMAS,the Swedish textile machinery association–have delivered the first microfactory for the production of fully finished filter bags to a major international filtration industry customer,in cooperation with JUKI Central Europe.
文摘Objective:This study aimed to examine the causal model of eating behaviors among pregnant women working in industrial factories.Methods:This cross-sectional study was conducted on 210 participants,attending 4 healthcare centers,at a tertiary care hospital in Chonburi province,Thailand.Data were collected using 7 questionnaires:demographic form,eating behavior questionnaire,perceived benefits of the healthy eating questionnaire,perceived barriers to the healthy eating questionnaire,perceived self-efficacy questionnaire,social support questionnaire,and accessibility to healthy foods questionnaire.Descriptive statistics and path analysis were used for data analysis.Results:The participants had relatively high mean scores for eating behaviors.The final model fitted well with the dataχ^(2)=12.86,df=10,P=0.23;χ^(2)/df=1.29;comparative fit index(CFI)=0.98;goodness-of-fit index(GFI)=0.98;adjusted goodness-of-fit index(AGFI)=0.95;root mean square error of approximation(RMSEA)=0.04.Four factors-perceived benefits(β=0.13,P<0.05),perceived self-efficacy in healthy eating(β=0.22,P<0.001),pregnancy planning(β=0.28,P<0.001),and accessibility to healthy foods in the factory(β=0.12,P<0.05)-positively affected eating behavior,while only perceived barriers to healthy eating had a negative effect on eating behavior(β=−0.24,P<0.001).All the above factors explained 27.2%of the variance in eating behaviors.Conclusions:Nurses or healthcare providers can apply these findings to create an eating behavior modification program,focusing on pregnancy planning,behavior-specific variables,and interpersonal and situational influence,to promote the nutritional status of pregnant women working in industrial factories.
文摘Renovation design of wasteland on the original Quarter A of Panzhihua Nongnongping Steelcasting Factory was taken for example in this study, natural conditions and biological landscapes in the study area were investigated. Principles and theories of the renovation design were introduced, it was proposed that protection and landscape renovation of industrial heritage had to be insisted to make regular and unique overall spatial layouts. On this basis, design approaches for the wasteland landscape renovation of the steel-casting factory were proposed as "maintaining original images, realizing the functional substitution; optimizing spatial structure; updating seriously-damaged industrial facilities with insignificant functionality; improving and recovering landscape soil; recovering and reconstructing vegetation".
基金Supported by Basic Research Projects of Leading Science and Technology in Henan Province (82300433202)~~
文摘[Objective] The aim was to explore the biological effect of low energy ion beam mediated parameters with fractional factorial design method. [Method] The twin-embryos seed of autotetraploid rice DER10-04-01 was taken as the receptor material,and the Elymus dahuricus Turcz. was used as materials to provide DNA to carry out the ion beam mediated experiment. And the fractional factorial design method was used to study the parameters of low enery N＋ ion beam mediated foreign genes into rice. [Result] The implantation energy,dose,DNA concentrations and immersion time of DNA showed significant biological effects on the normal growth and development of DER10-04-01,in which the biological effects of implantation dose and DNA concentrations were relatively obvious. [Conclusion] The implantation energy,dose,DNA concentrations and immersion time of DNA were major factors showing important effects on the experimental result in ion beam mediated foreign genetic materials.
文摘Objective: To understand the HIV/AIDS-related knowledge, attitudes and behaviors (KAB) among immigrant female factory workers(IFFW). Methods: A cross-sectional study was conducted among IFFWs sampled from several joint- venture and private factories in Dongguan city. Results: Out of 175 sampled workers, 165 qualified for inclusion and the median age was 22. The results showed that the IFFWs had low levels of knowledge about HIV/AIDS, and held many misconceptions. Thirty three of 76 (43.4%) unmarried IFFWs had premarital sexual contact, and more than half of these contacts were one-night stands (54.5%) . More than one quarter of the women(25.9%) never used condoms, 49.4% sometimes used condoms and 24.7% used condoms every time. Twenty-eight women (31.8%) had an induced abortion because of an unexpected pregnancy. Fourteen (14.9%) had been infected with STDs, and four IFFWs(2.8%)had tried drugs before the interview. Conclusion: In order to empower the IFFWs in the city to protect themselves from HIV, and to contain the rapid spread of HIV in our province, targeted HIV/ AIDS health promotion programs should be urgently implemented among IFFWs in Dongguan city. The programs should be designed to improve the knowledge of HIV, to promote condom use, and to reduce risky behaviors.
