Insulation effect of air cavity in sand mold using 3D printing technology

The insulation effect of the air cavity surrounding the riser in a 3D printed sand mold was studied. The influence of the air cavity on heat flux was theoretically analyzed. The results demonstrated that the heat flux of the air cavity in the 3D printed sand mold was significantly less than that of resin-bonded sand. The insulation effect of the air cavity in sand molds for a cylinder casting and a stress-frame casting were simulated using software COMSOL. The results illustrated that the air cavity could be used to insulate the riser and it was more suitable for a lower melting point metal casting. An air cavity with 10-15 mm width and 5-10 mm away from the riser can significantly prolong the solidification of the riser by over 10%. Meanwhile, the sand mold for the stressframe was made by 3D printing technology and poured with aluminum alloy A356 melt. The experiment results showed that the presence of the air cavity led to a 12.5% increase of the solidification time of its riser.

妊娠期高血压疾病继发下肢深静脉血栓患者血清CC趋化因子配体3和D-二聚体水平变化及检测意义

目的:探讨妊娠期高血压疾病(HDP)继发下肢深静脉血栓(DVT)患者血清CC趋化因子配体3(CCL3)和D-二聚体(D-D)水平变化及检测意义。方法:选取HDP患者195例,根据产后6周内是否发生下肢DVT将患者分为DVT组(55例)和非DVT组(140例)。收集两组临床资料,采用酶联免疫吸附试验测定CCL3、D-D水平。采用Logistic回归分析HDP患者发生下肢DVT的影响因素。绘制受试者工作特征(ROC)曲线分析血清CCL3、D-D对HDP患者发生下肢DVT的预测价值。相加模型分析交互作用,计算交互作用相关指标。结果:与非DVT组比较,DVT组舒张压(DBP)、收缩压(SBP)、子痫前期及子痫所占比例、血小板计数(PLT)和静脉血栓栓塞症(VTE)评分较高,活化部分凝血活酶时间(APTT)、凝血酶原时间(PT)较低(均P<0.05)。与非DVT组比较,DVT组血清CCL3、D-D水平升高(均P<0.05)。HDP分期、VTE评分、PLT及血清CCL3、D-D是HDP患者发生下肢DVT的影响因素(均P<0.05)。血清CCL3、D-D联合预测HDP患者发生下肢DVT的曲线下面积(AUC)高于CCL3和D-D分别单独预测的AUC(均P<0.05)。调整混杂因素后,CCL3、D-D同时暴露患者发生下肢DVT风险是CCL3、D-D同时未暴露患者的6.905倍,存在正交互作用,且CCL3、D-D同时暴露患者中有44.28%是因两者交互作用引起,在仅因CCL3、D-D暴露所致下肢DVT发生风险中,有55.19%是因两者交互作用引起。结论:HDP继发下肢DVT患者血清CCL3、D-D水平升高,两者存在正交互作用,联合检测对发生下肢DVT的预测价值较高。

Tailoring mechanical properties of PμSL 3D-printed structures via size effect

Projection micro stereolithography(PμSL)has emerged as a powerful three-dimensional(3D)printing technique for manufacturing polymer structures with micron-scale high resolution at high printing speed,which enables the production of customized 3D microlattices with feature sizes down to several microns.However,the mechanical properties of as-printed polymers were not systemically studied at the relevant length scales,especially when the feature sizes step into micron/sub-micron level,limiting its reliable performance prediction in micro/nanolattice and other metamaterial applications.In this work,we demonstrate that PμSL-printed microfibers could become stronger and significantly more ductile with reduced size ranging from 20μm to 60μm,showing an obvious size-dependent mechanical behavior,in which the size decreases to 20μm with a fracture strain up to~100%and fracture strength up to~100 MPa.Such size effect enables the tailoring of the material strength and stiffness of PμSL-printed microlattices over a broad range,allowing to fabricate the microlattice metamaterials with desired/tunable mechanical properties for various structural and functional applications.

Prediction and quantification of effective gas source rocks in a lacustrine basin:Western Depression in the Liaohe Subbasin,China

Due to limited data on the geochemical properties of natural gas,estimations are needed for the effective gas source rock in evaluating gas potential.However,the pronounced heterogeneity of mudstones in lacustrine successions complicates the prediction of the presence and geochemical characteristics of gas source rocks.In this paper,the Liaohe Subbasin of Northeast China is used as an example to construct a practical methodology for locating effective gas source rocks in typical lacustrine basins.Three types of gas source rocks,microbial,oil-type,and coal-type,were distinguished according to the different genetic types of their natural gas.A practical three-dimensional geological model was developed,refined,and applied to determine the spatial distribution of the mudstones in the Western Depression of the Liaohe Subbasin and to describe the geochemical characteristics(the abundance,type,and maturation levels of the organic matter).Application of the model in the subbasin indicates that the sedimentary facies have led to heterogeneity in the mudstones,particularly with respect to organic matter types.The effective gas source rock model constructed for the Western Depression shows that the upper sequence(SQ2)of the Fourth member(Mbr 4)of the Eocene Shahejie Formation(Fm)and the lower and middle sequences(SQ3 and SQ4)of the Third member(Mbr 3)form the principal gas-generating interval.The total volume of effective gas source rocks is estimated to be 586 km^(3).The effective microbial,oil-type,and coal-type gas source rocks are primarily found in the shallow western slope,the central sags,and the eastern slope of the Western Depression,respectively.This study provides a practical approach for more accurately identifying the occurrence and geochemical characteristics of effective natural gas source rocks,enabling a precise quantitative estimation of natural gas reserves.

3D deformation effect and optimal excavated design of surface mine

The three-dimensional （3D） deformation effect of the slope engineering under the step-by-step excavation for the Antaibao surface mine was analyzed using the FLAC^3D technique. An optimal excavated scheme with a relatively steeper slope angle of 47° instead of 30° was successfully implemented at the west wall in the geological section 73200 of the mine area, where the 3D effect of the nonlinear large deformation of the slope was taken into account. Based on the above research conclusion, put forward the countermeasures of shortening mining length, excavating by different regions, timely foot backfilling to protect the excavated slope, and monitoring and feedback adjustment by studying the nonlinear effect. The results show that these countermeasures are effective in controlling maximum deformation and increasing the stability of the slope.

Novel ternary metals-based telluride electrocatalyst with synergistic effects of high valence non-3d metal and oxophilic Te for pH-universal hydrogen evolution reaction

Electrocatalyst designs based on oxophilic foreign atoms are considered a promising approach for developing efficient pH-universal hydrogen evolution reaction(HER)electrocatalysts by overcoming the sluggish alkaline HER kinetics.Here,we design ternary transition metals-based nickel telluride(Mo WNi Te)catalysts consisting of high valence non-3d Mo and W metals and oxophilic Te as a first demonstration of non-precious heterogeneous electrocatalysts following the bifunctional mechanism.The Mo WNi Te showed excellent HER catalytic performance with overpotentials of 72,125,and 182 mV to reach the current densities of 10,100,and 1000 mA cm^(-2),respectively,and the corresponding Tafel slope of 47,52,and 58 mV dec-1in alkaline media,which is much superior to commercial Pt/C.Additionally,the HER performance of Mo WNi Te is well maintained up to 3000 h at the current density of 100 mA cm^(-2).It is further demonstrated that the Mo WNi Te exhibits remarkable HER activities with an overpotential of 45 mV(31 mV)and Tafel slope of 60 mV dec-1(34 mV dec-1)at 10 mA cm^(-2)in neutral(acid)media.The superior HER performance of Mo WNi Te is attributed to the electronic structure modulation,inducing highly active low valence states by the incorporation of high valence non-3d transition metals.It is also attributed to the oxophilic effect of Te,accelerating water dissociation kinetics through a bifunctional catalytic mechanism in alkaline media.Density functional theory calculations further reveal that such synergistic effects lead to reduced free energy for an efficient water dissociation process,resulting in remarkable HER catalytic performances within universal pH environments.

Photocatalytic seawater splitting by 2D heterostructure of ZnIn_(2)S_(4)/WO_(3) decorated with plasmonic Au for hydrogen evolution under visible light

Photocatalytic H_(2) evolution from seawater splitting presents a promising approach to tackle the fossil energy crisis and mitigate carbon emission due to the abundant source of seawater and sunlight on the earth.However,the development of efficient photocatalysts for seawater splitting remains a formidable challenge.Herein,a 2D/2D ZnIn_(2)S_(4)/WO_(3)(ZIS/WO_(3))heterojunction nanostructure is fabricated to efficiently separate the photoinduced carriers by steering electron transfer from the conduction band minimum of WO_(3) to the valence band maximum of ZIS via constructing internal electric field.Subsequently,plasmonic Au nanoparticles(NPs)as a novel photosensitizer and a reduction cocatalyst are anchored on ZIS/WO_(3) surface to further enhance the optical absorption of ZIS/WO_(3) heterojunction and accelerate the catalytic conversion.The obtained Au/ZIS/WO_(3) photocatalyst exhibits an outstanding H_(2) evolution rate of 2610.6 or 3566.3μmol g^(-1)h~(-1)from seawater splitting under visible or full-spectrum light irradiation,respectively.These rates represent an impressive increase of approximately 7.3-and 6,6-fold compared to those of ZIS under the illumination of the same light source.The unique 2D/2D structure,internal electric field,and plasmonic metal modification together boost the photocatalytic H_(2) evolution rate of Au/ZIS/WO_(3),making it even comparable to H_(2) evolution from pure water splitting.The present work sheds light on the development of efficient photocatalysts for seawater splitting.

Effect of 1, 25-Dihydroxyvitamin D_3 on Gastric Carcinogenesis Induced by N-Methyl-N'-nitro-N-nitrosoguanidine in Rats

The effect of 1, 25-dihydroxyvitamin D3 (1, 25 (OH)2D3) given in the post-initiation stage of gastric carcinogenesis induced by N-methyl-N-nitro-N-nitrosoguanidine (MNNG) was investigated in male Wistar rats. Gastric carcinogenesis in rats was induced by administration of MNNG (150 mg·L-1) in drinking water. Four weeks after MNNG exposure, the rats were switched to the diet containing 1, 25 (OH)2D3 (2. 5 μg·kg-1 and 5. 0 μg·kg-1) and maintained on the diet. Animals were killed at week 16 and week 32 for immunohistochemical and histopathological studies. At week 16, the proliferating cell nuclear antingen (PCNA) labeling index in epithelium from the glandular stomach of rats that received 1, 25 (OH)2D3 (5.0 μg·kg-1) in combination with MNNG (150 mg·L-1) were significantly higher when compared with the rats receiving MNNG alone. Supplementation of 1, 25 (OH)2D3 (5. 0 μg·kg-1) in the rats' diet caused a dramatic increase in carcinoma incidence, and the number of individual cancer foci in the glandular stomach of rats receiving MNNG at week 32. It was concluded that certain dose of 1, 25 (OH)2D3 enhanced gastric carcinogenesis induced by MNNG in rats.

Effect of Valence Band Tail Width on the Open Circuit Voltage of P3HT:PCBM Bulk Heterojunction Solar Cell:AMPS-1D Simulation Study

The effect of the valence band tail width on the open circuit voltage of P3HT：PCBM bulk heterojunction solar cell is investigated by using the AMPS-1D computer program. An effective medium model with exponential valence and conduction band tail states is used to simulate the photovoltaic cell. The simulation result shows that the open circuit voltage depends Iinearly on the logarithm of the generation rate and the slope depends on the width of the valence band tail. The open circuit voltage decreases with the increasing width of the band tail. The dark and light ideality factors increase with the width of the valence band tail.

Dynamic Modelling of a Hybrid Variable Reluctance Machine Using the 3D Finite Element Method

This paper presents the work carried out to evaluate the dynamic performance of the Hybrid Variable Reluctance Motor (HVRM). The fourth-order Runge-Kutta integration algorithm was employed to solve the equations of the dynamic model, in conjunction with the three-dimensional finite element method. The 3D numerical data was calculated using Comsol Multiphysics, which accounts for the nonlinearity of the ferromagnetic material and the 3D nature of the HVRM. The outcomes of this study are precise and accurately predict the dynamic behaviour of the HVRM in terms of rotor position response, rotational speed and torque. The distinctive contribution of this work lies in the 3D numerical modelling of the HVRM and the subsequent evaluation and analysis of its dynamic operation. Analytical and numerical 2D studies are less resource-intensive and time-consuming, and are more straightforward and rapid to analyse and interpret. However, they are constrained in their capacity to examine spatial, volumetric interactions and intricate dynamics such as flux studies where three 3D effects cannot be disregarded, winding end effects and the configuration and positioning of the interposed permanent magnet.

Modulation Effects of the 3D Strain Microenvironment on Characteristics of Mesenchymal Stem Cell-Derived Exosomes

It is necessary to investigate the characteristics of Mesenchymal stem cells(MSCs)derived exosomes,and especially their application in tissue regeneration.Previous studies have shown that inflammatory stimulation enhanced the secretion of MSC-derived exosomes with stronger anti-inflammatory protein,cytokine profiles,and functional RNA via altering COX2/PGE2 pathway.Recently,accumulating evidence has also revealed that biophysical cues(especially biomechanical cues)in cell microenvironment have significant effects not only on cells but also on their exosomes.It has been reported that applying bi-axial strain to MSCs induces formation of a stiffer cytoskeleton through mTORC2 signaling,which biases against adipogenic differentiation and toward osteoblastogenesis.At the same time,For example,dimensionality,composition and stiffness of the extracellular matrix(ECM)has been proved to affect the size and composition of exosomes secreted by cancer cells.However,the effects of biomechanical cues in the three-dimensional(3D)microenvironment on stem cell-derived exosomes remains to be unveiled.Therefore,it is important to understand the roles of 3D cell mechanical microenvironment in regulating the characteristics of stem cell-derived exosomes and develop more efficient approaches to enhance their functions.This study aimed to explore the changes in characteristics of exosomes secreted by MSCs in periodontium in response to the matrix strain in 3D.Periodontal ligament stem cells(PDLSCs)were cultured in a 3D strain microenvironment engineered with microscale magnetically stretched collagen hydrogels.The morphology,particle distribution,marker protein expression of PDLSC-derived exosomes were analyzed.Then the pro-osteogenic property of exosomes was evaluated by assessing cell viability,proliferation,migration and osteogenic differentiation of target cells,for instance human bone marrow mesenchymal stem cells(hBMSCs).Detailed characterizations revealed that PDLSC-derived exosomes in the 3D strain mi-croenvironment were with similar morphology,particle distribution and surface markers.Notably,Exosomes secreted by PDLSCs in strain microenvironment were more endocytosed by hBMSCs and were more potent in improving proliferation and migration of hBMSCs,comparing with PDLSCs in non-strain environment.Alizarin red staining and molecular biology experiments confirmed that treatment of exosomes secreted by PDLSCs under mechanical stimulation led to a significant increase in osteogenic differentiation of hBMSCs in vitro.Meanwhile,in vivo study also indicated that PDLSC-derived exosomes obtained from the 3D strain microenvironment could obviously promote new bone formation.Our findings revealed that mechanical cues profoundly affected the characteristics of PDLSC-derived exosomes,especially for their bio-activity,providing a foundation for using the 3D mechanical microenvironment to enhance the osteo-inductive functions of stem cell-derived exosomes in cell-free therapy for bone regeneration.

Effective Thermal Conductivity for 3D Five-Directional Braided Composites Based on Microstructural Analysis

A method for predicting effective thermal conductivities(ETCs) of three-dimensional five-directional(3D5D) braided composites is presented. The effective thermal conductivity prediction method contains a digital image processing technology. Multiple scanning electron microscopy(SEM)images of composites are analyzed to obtain actual microstructural features. These actual microstructural features of 3D5D braided composites are introduced into representative volume element(RVE) modeling. Apart from applying actual microstructural features,compression effects between yarns are considered in the modeling of RVE,making the RVE more realistic. Therefore,the ETC prediction method establishes a representative unit cell model that better reflects the true microstructural characteristics of the 3D5D braided composites. The ETCs are predicted with the finite element method. Then thermal conductivity measurements are carried out for a 3D5D braided composite sample.By comparing the predicted ETC with the measured thermal conductivity, the whole process of the ETC prediction method is proved to be effective and accurate,where a relative error of only 2.9 % is obtained.Furthermore,the effects of microstructural features are investigated,indicating that increasing interior braiding angles and fiber fill factor can lead to higher transverse ETCs. Longitudinal ETCs decrease with increasing interior braiding angles,but increase with increasing fiber fill factor. Finally,the influence of variations of microstructure parameters observed in digital image processing are investigated. To explore the influence of variations in microstructural features on variations in predicted ETCs,the actual probability distributions of microstructural features obtained from the 3D5D braided composite sample are introduced into the ETC investigation. The results show that,compared with the interior braiding angle,variations in the fiber fill factor exhibit more significant effects on variations in ETCs.

Size effects in the uniaxial compressive properties of 3D printed models of rocks:an experimental investigation

Transparent physical models of real rocks fabricated using three-dimensional(3D)printing technology are used in photoelas-tic experiments to quantify the evolution of the internal stress and deformation fields of rocks.Therefore,they are rendered as an emerging powerful technique to quantitatively reveal the intrinsic mechanisms of rock failure.The mechanical behav-ior of natural rocks exhibits a significant size effect;however,limited research has been conducted on whether transparent physical models observe similar size effects.In this study,to make the transparent printed models accurately demonstrate the mechanical behavior of natural rocks and reveal the internal mechanism of the size effect in rock mechanical behavior,the size effect in 3D printed models of fractured and porous rocks under uniaxial compressive loading was investigated.Transparent cylindrical models with different sizes that contained different fractured and porous structures were printed using the fracture and porous characteristics extracted from natural coal and sandstone.The variation in uniaxial compres-sive strength and elastic modulus of fractured and porous models for increasing model sizes were obtained through uniaxial compression experiments.Finally,the influence of internal discontinuous structural features,such as fractures and pores,on the size effect pertaining to the mechanical behavior of the model was analyzed and elaborated by comparing it with the mechanical properties of the continuous homogeneous model without fractures and pores.The findings provided support and reference to analyze the size effect of rock mechanical behavior and the effect of the internal discontinuous structure using 3D printed transparent models.

3D Effects on Vortex-Shedding Flow and Hydrodynamic Coefficients of A Vertically Oscillating Cylinder with A Bottom-Attached Disk

Vortex-shedding flow induced by the vertical oscillation of a cylinder with bottom-attached disks of different diameter ratio Dd/Dc and thickness ratio td/Dc is studied by a 3D （three-dimensional） numerical model developed in this paper, and compared with the results obtained through 2D （two-dimensional） numerical model. The high-order upwind scheme is applied to stabilize the computation, and convergence is accelerated by the multi-grid method. Qualitative and quantitative analyses of the differences between the 2D and 3D simulation results reveal the 3D effect on the flow field characteristics and hydrodynamic coefficients of the vertically oscillating cylinder with a bottom-attached disk. The 3D effect on the fluid field is mainly reflected in the significance of three vortex-shedding patterns： ωx has a greater effect on the flow fields around the sharp edges relative to the vortices generated in the 2D simulation. In the slice along the axial orientation, the vortex effect of ωy along the radial axis is smaller than that of ωx along the circumferential direction, indicating the radial effect on the velocity more pronounced than the circumferential effect around the sharp edges of the disk. The rotational interaction ωz of the fluid in the horizontal plane during the heave motion is insignificant. Based on the 2D and 3D simulation results, the turning points that separate the increasing regimes of the added mass coefficient and damping ratio are identified. The dependence of the turning point on the diameter ratio Dd/Dc and thickness ratio td/Dc are discussed in detail.

Water equivalence of some 3D dosimeters:a theoretical study based on the effective atomic number and effective fast neutron removal cross section

Effective atomic numbers for photon energy absorption(ZPEA_(eff)) and their corresponding electron numbers (NPEA_(eff)), and effective macroscopic removal cross sections of fast neutrons(RR) were calculated for 27 different types of three-dimensional dosimeters, four types of phantom materials, and water. The values of ZPEA_(eff) and NPEA_(eff) were obtained using the direct method for energies ranging from 10 keV to 20 MeV. Results are presented relative to water, for direct comparison over the range of examined energies. The effect of monomers that are used in polymer gel dosimeters on the water equivalence is discussed. The relation between Σ_R and hydrogen content was studied. Micelle gel dosimeters are highly promising because our results demonstrate perfect matching between the effective atomic number, electron density number, and fast neutron attenuation coefficient of water.

Site 0ccupancy of Alloying Elements and Their Effects on the D0_3 Phase Stability in Fe_3Al

The effects of ternary solutes Ti, Co, V, Cr, Ta, W and Mo on the D03 phase 5tability of Fe3Alintermetallics are investigated by tight-binding linear Muffin-tin orbitaI method. The predictedsite preference5 of these elements in Fe3AI are in agreement with the experimental observations.The calculated Iocal magnetic moment of Fe3AI is identical to the experimentaI. ln addition, itis found that the D03 phase stability of Fe3AI doped with Ti, V, Co and Cr depends on 'energygap- of energy band near Fermi level. while the D03 phase stability of Fe3AI doped with Ta, Wand Mo may be affected by Madelung energy.

Huntsman Textile Effects推出新一代扩散促进剂UNIVADINE~? E3-3D,重新定义聚酯染色

近日,Huntsman Textile Effects(亨斯迈纺织染化)推出了新一代扩散促进剂UNIVADINE?E3-3D,旨在帮助染厂遵循当前以及未来可能推行的行业可持续标准,对聚酯纤维、超细聚酯纤维及其混纺产品进行环保而高效的染色。UNIVADINE?E3-3D扩散促进剂隶属亨斯迈创新的dyEvolution印染助剂系列,它不含苯甲酸苄酯和其他有害物质,气味淡,可达到快速染色的效果,匀染、缓染和移染特性卓越。“UNIVADINE?E3-3D扩散促进剂性能卓越而且环保、实惠。

Pressure Effects on Spectra of Tunable Laser Crystal GSGG:Cr3+ III: Pressure-Induced Shift of R1 Line at 70 K

By means of both a theory for pressure-induced shifts (PS) of energy spectra and a theory for shifts of energy spectra due to electron-phonon interaction (EPI), the 'pure electronic' PS and the PS due to EPI of R1 line of GSGG:Cr3+ at 70 K have been calculated, respectively. Their physical origins have been revealed. It is found that the admixture of and base-wavefunctions in the wavefunctions of R1 level of GSGG:Cr3+ at 70 K is remarkable under the normal pressure, and the degree of the admixture rapidly decreases with increasing pressure. The change of the degree of the admixture with the pressure plays a key role for not only the pure electronic PS of R1 line but also the PS of R1 line due to EPI. The detailed calculations and analyses show that the pressure-dependent behaviors of the pure electronic PS of R1 line and the PS of R1 line due to EPI are quite different. It is the combined effect of them that gives rise to the total PS of R1 line, which has satisfactorily explained the experimental data (including a reversal of PS of R1 line). In contributions to PS of R1 line due to EPI at 70 K, the temperature-independent contribution is much larger than the temperature-dependent contribution. The former results from the interaction between the zero-point vibration of the lattice and localized electronic state.

Pressure Effects on Spectra of Tunable Laser Crystal GSGG： Cr^3＋ IV： Pressure—Induced Shifts of R1 Line, R2 Line, and U Band at 300 K

By means of both a theory for pressure-induced shifts (PS) of energy spectra and a theory for shifts of energy spectra due to electron-phonon interaction (EPI), the 'pure electronic' PS and the PS due to EPI of R1 line, R2 line, and U band of GSGG:Cr3+ at 300 K have been calculated, respectively. The calculated results are in good agreement with all the experimental data. Their physical origins have also been explained. It is found that the mixing-degree of and base-wavefunctions in the wavefunctions of R1 level of GSGG:Cr3+ at 300 K is remarkable under normal pressure, and the mixing-degree rapidly decreases with increasing pressure. The change of the mixing-degree with pressure plays a key role not only for the 'pure electronic' PS of R1 line and R2 line but also the PS of R1 line and R2 line due to EPI. The pressure-dependent behaviors of the 'pure electronic' PS of R1 line (or R2 line) and the PS of R1 line (or R2 line) due to EPI are quite different. It is the combined effect of them that gives rise to the total PS of R1 line (or R2 line). In the range of about 15 kbar ~ 45 kbar, the mergence and/or order-reversal between levels and levels take place, which cause the fluctuation of the rate of PS for with pressure. At 300 K, both the temperature-dependent contribution to R1 line (or R2 line or U band) from EPI and the temperature-independent one are important.

After Effects5.5的3D图层和灯光结合应用实例

After Effects5.5中3D图层和灯光做阴影的运用其实是非常普遍而实用的,这也是After Effects5.5体现它自身3D方面能力的具体表现之一,可以称之为虚拟3D。