A new guidance law, called biased retro proportional navigation(BRPN), is proposed. The guidance law is designed to intercept high-speed targets with angular constraint, which can be used for ballistic target intercep...A new guidance law, called biased retro proportional navigation(BRPN), is proposed. The guidance law is designed to intercept high-speed targets with angular constraint, which can be used for ballistic target interception. BRPN guidance law is defined, and the exact time-varying bias for a required impact angle is derived. Furthermore, the simulation results(trajectory, variation of navigation ratio, capture region, etc) are compared with those of biased proportional navigation(BPN), proportional navigation and retro-proportional navigation. The results show that,at the cost of a higher intercept time, BRPN demands lower terminal lateral acceleration and has larger capture region compared to BPN.展开更多
A new proportional navigation(PN) guidance law,called combined proportional navigation(CPN),is proposed.The guidance law is designed to intercept high-speed targets,which is a common case for ballistic targets.The ran...A new proportional navigation(PN) guidance law,called combined proportional navigation(CPN),is proposed.The guidance law is designed to intercept high-speed targets,which is a common case for ballistic targets.The range of target-to-interceptor speed ratio during target interception is derived when guidance laws are applied in high-speed targets interception,and the effectiveness of negative navigation ratio in the PN-based guidance law is proven analytically in some lemmas.Based on the lemmas,the lateral acceleration command of CPN is defined,and the solution to the appearance of singularity in time-varying navigation ratio is given.The simulation results show that CPN can determine headon engagement(as PN) or tail-chase engagement(as RPN) through initial path angle compared with PN and retro proportional navigation(RPN),and can adjust the value of navigation ratio for head-on engagement or tail-chase engagement.Therefore,the capture region of CPN is larger than that of other guidance laws using PN-based methods.展开更多
This article presents a good robust and real-time system scheme of the mobile robot obstacle detection and navigation, which principle of work is based on the feature descriptor SURF. In this scheme, firstly, the imag...This article presents a good robust and real-time system scheme of the mobile robot obstacle detection and navigation, which principle of work is based on the feature descriptor SURF. In this scheme, firstly, the image information of the mobile robot path was captured by the binocular camera; then the feature points were extracted and corresponding matched using SURF to the binocular images as the undetected obstacles; finally fixed the position of the objective by the parallax between the matching points combining with the binocular vision calibration model. Theoretical derivation and experimental results show that this scheme is more accurate for the detection and navigation of the interest points. It has fast matching speed and high accuracy and low error. So, it has certain practical effect and popularizing value for the mobile robot real-time obstacle avoidance and navigation.展开更多
为了解决传统农机导航系统中前轮转角测量传感器不易安装、维护困难以及转角估计不准确等问题,本文提出了一种基于受控自回归滑动平均模型和卡尔曼滤波器的组合模型(Auto-regressive moving average with exogenous input-Kalman filter...为了解决传统农机导航系统中前轮转角测量传感器不易安装、维护困难以及转角估计不准确等问题,本文提出了一种基于受控自回归滑动平均模型和卡尔曼滤波器的组合模型(Auto-regressive moving average with exogenous input-Kalman filter,ARMAX-KF)与速度补偿的拖拉机无前轮传感器转角估计方法。首先,利用Hammerstein非线性系统对拖拉机的转向系统建模,并采用递归最小二乘法(Recursive least squares method,RLS)将其辨识为ARMAX模型;其次,对后轮轴中心接地点速度进行杆臂误差补偿;最后,提出了ARMAX-KF方法,利用卡尔曼滤波器的校正特性,以拖拉机的运动学转角作为观测值,修正ARMAX模型预测的转角速度积分值,从而估计拖拉机的前轮转角。在速度杆臂补偿测量方法试验验证中,补偿后运动学转角平均绝对误差为1.110°,标准差为1.727°,相比补偿前分别减少61.13%和31.55%;在动态转角试验中,ARMAX模型预测的转角速度标准差为2.439(°)/s,相比采用固定传动比方法误差减少56.58%;采用基于ARMAX-KF的前轮转角估计绝对平均误差为0.649°,标准差为0.371°,相比采用固定传动比和卡尔曼滤波器的方法分别减少56.9%和78.82%;在直线导航跟踪试验中,采用基于ARMAX-KF的前轮转角估计标准差为0.649°,本文提出的方法提高了转角估计精度和农机导航作业质量。展开更多
文摘A new guidance law, called biased retro proportional navigation(BRPN), is proposed. The guidance law is designed to intercept high-speed targets with angular constraint, which can be used for ballistic target interception. BRPN guidance law is defined, and the exact time-varying bias for a required impact angle is derived. Furthermore, the simulation results(trajectory, variation of navigation ratio, capture region, etc) are compared with those of biased proportional navigation(BPN), proportional navigation and retro-proportional navigation. The results show that,at the cost of a higher intercept time, BRPN demands lower terminal lateral acceleration and has larger capture region compared to BPN.
文摘A new proportional navigation(PN) guidance law,called combined proportional navigation(CPN),is proposed.The guidance law is designed to intercept high-speed targets,which is a common case for ballistic targets.The range of target-to-interceptor speed ratio during target interception is derived when guidance laws are applied in high-speed targets interception,and the effectiveness of negative navigation ratio in the PN-based guidance law is proven analytically in some lemmas.Based on the lemmas,the lateral acceleration command of CPN is defined,and the solution to the appearance of singularity in time-varying navigation ratio is given.The simulation results show that CPN can determine headon engagement(as PN) or tail-chase engagement(as RPN) through initial path angle compared with PN and retro proportional navigation(RPN),and can adjust the value of navigation ratio for head-on engagement or tail-chase engagement.Therefore,the capture region of CPN is larger than that of other guidance laws using PN-based methods.
文摘This article presents a good robust and real-time system scheme of the mobile robot obstacle detection and navigation, which principle of work is based on the feature descriptor SURF. In this scheme, firstly, the image information of the mobile robot path was captured by the binocular camera; then the feature points were extracted and corresponding matched using SURF to the binocular images as the undetected obstacles; finally fixed the position of the objective by the parallax between the matching points combining with the binocular vision calibration model. Theoretical derivation and experimental results show that this scheme is more accurate for the detection and navigation of the interest points. It has fast matching speed and high accuracy and low error. So, it has certain practical effect and popularizing value for the mobile robot real-time obstacle avoidance and navigation.
文摘为了解决传统农机导航系统中前轮转角测量传感器不易安装、维护困难以及转角估计不准确等问题,本文提出了一种基于受控自回归滑动平均模型和卡尔曼滤波器的组合模型(Auto-regressive moving average with exogenous input-Kalman filter,ARMAX-KF)与速度补偿的拖拉机无前轮传感器转角估计方法。首先,利用Hammerstein非线性系统对拖拉机的转向系统建模,并采用递归最小二乘法(Recursive least squares method,RLS)将其辨识为ARMAX模型;其次,对后轮轴中心接地点速度进行杆臂误差补偿;最后,提出了ARMAX-KF方法,利用卡尔曼滤波器的校正特性,以拖拉机的运动学转角作为观测值,修正ARMAX模型预测的转角速度积分值,从而估计拖拉机的前轮转角。在速度杆臂补偿测量方法试验验证中,补偿后运动学转角平均绝对误差为1.110°,标准差为1.727°,相比补偿前分别减少61.13%和31.55%;在动态转角试验中,ARMAX模型预测的转角速度标准差为2.439(°)/s,相比采用固定传动比方法误差减少56.58%;采用基于ARMAX-KF的前轮转角估计绝对平均误差为0.649°,标准差为0.371°,相比采用固定传动比和卡尔曼滤波器的方法分别减少56.9%和78.82%;在直线导航跟踪试验中,采用基于ARMAX-KF的前轮转角估计标准差为0.649°,本文提出的方法提高了转角估计精度和农机导航作业质量。
