Stirring-sampling method is a widely adopted method to measure sediment concentrations in collection tanks of runoff plots,but with high systematic measurement errors.This research aimed to advance an approach for bui...Stirring-sampling method is a widely adopted method to measure sediment concentrations in collection tanks of runoff plots,but with high systematic measurement errors.This research aimed to advance an approach for building correction equations to remove measurement errors in designed sediment concentration range.Experimental data of sediment measurement from the stirring-sampling method,with four representative soils,under the designed sediment concentrations(1,2,5,8,10,20,50,80,100,200,500,800,and 1000 kg/m^(3))were used to demonstrate the correction methodological process.Two correction methods(step-wise correction and universal correction)were suggested for the trial in this study based on the distribution of measurement errors.In the step-wise correction,the correction equations were made with a series of linear functions without intercept for the low concentration group(0-20 kg/m^(3)),a series of linear functions with intercept for the high(20-200 kg/m^(3))and extremely high(200-1000 kg/m^(3))concentration groups,consecutively.The correction equations were a series of power functions in the universal correction.For the step-wise correction,most of the relative errors of correction sediment concentrations were smaller than 15%and 10%under high and extremely high concentration groups,but the corrected accuracy was not good in the sediment concentration of 1,2,5 kg/m^(3)with the corrected relative errors of 0.20%-206.07%.For the universal correction,the corrected relative errors(0.19%-31.81%)of the four soils were low under the condition of extremely high sediment concentrations,but other corrected accuracies weren’t good with the corrected relative errors of 0.68%-1154.71%.The corrected accuracy of step-wise correction is higher than that of the universal correction,but the universal correction is more convenient.These results indicated that the correction equations could efficiently revise the measurement errors of the tested soils and that this method can be generalized to other soil types and was meaningful in monitoring soil erosion.展开更多
Runoff plots are widely used worldwide to monitor water and soil losses.Sediment concentration in runoff collection tank is measured by stirring-sampling procedure,but this method may produce high measurement error du...Runoff plots are widely used worldwide to monitor water and soil losses.Sediment concentration in runoff collection tank is measured by stirring-sampling procedure,but this method may produce high measurement error due to the uneven mixing of collected sediments with water and soil particle deposition.This study aimed to identify the relationship between actual and measured sediment concentrations,so as to estimate the systematic error of sediment concentration measurement from runoff collection tank by traditional stirring-sampling procedure and the possibility to eliminate it.Four major soils including black soil,silt loess,clay loess,and purple soil in China were used to determine the correlation between the measured and designed sediment concentrations in laboratory.Tested sediment concentration was 1,2,5,8,10,20,50,80,100,200,500,800,and 1000 kg/m^(3),and total sediment-laden water volume was 50 L and 100 L.Five samples were collected successively from collection tank for each treatment and their sediment concentrations were measured by conventional oven-drying method.The results showed that all the measured sediment concentration values were smaller than the designed ones,but both the measured and designed values were linearly correlated significantly with determination coefficients greater than 0.8,generally.In the whole tested concentration range,the systematical error was-0.19 to-319.95 kg/m^(3) and relative error was 0.30%-84.5% for the 4 tested soils and 2 total sediment-laden water volumes.These results indicated a necessity and possibility to correct conventional sediment concentration measurement value.The result is usable to assess and correct the measurement error of sediment concentrations from traditional runoff plot.展开更多
基金supported by the“National Key Research and Development Program of China”under Project No.2016YFC0502403the“National Natural Science Foundation of China”under Project No.41230746,No.51621061.
文摘Stirring-sampling method is a widely adopted method to measure sediment concentrations in collection tanks of runoff plots,but with high systematic measurement errors.This research aimed to advance an approach for building correction equations to remove measurement errors in designed sediment concentration range.Experimental data of sediment measurement from the stirring-sampling method,with four representative soils,under the designed sediment concentrations(1,2,5,8,10,20,50,80,100,200,500,800,and 1000 kg/m^(3))were used to demonstrate the correction methodological process.Two correction methods(step-wise correction and universal correction)were suggested for the trial in this study based on the distribution of measurement errors.In the step-wise correction,the correction equations were made with a series of linear functions without intercept for the low concentration group(0-20 kg/m^(3)),a series of linear functions with intercept for the high(20-200 kg/m^(3))and extremely high(200-1000 kg/m^(3))concentration groups,consecutively.The correction equations were a series of power functions in the universal correction.For the step-wise correction,most of the relative errors of correction sediment concentrations were smaller than 15%and 10%under high and extremely high concentration groups,but the corrected accuracy was not good in the sediment concentration of 1,2,5 kg/m^(3)with the corrected relative errors of 0.20%-206.07%.For the universal correction,the corrected relative errors(0.19%-31.81%)of the four soils were low under the condition of extremely high sediment concentrations,but other corrected accuracies weren’t good with the corrected relative errors of 0.68%-1154.71%.The corrected accuracy of step-wise correction is higher than that of the universal correction,but the universal correction is more convenient.These results indicated that the correction equations could efficiently revise the measurement errors of the tested soils and that this method can be generalized to other soil types and was meaningful in monitoring soil erosion.
基金This work was financially supported by the“National Key Research and Development Program of China”under Project No.2016YFC0502403the“National Natural Science Foundation of China”under Project No.41230746 and No.51621061.
文摘Runoff plots are widely used worldwide to monitor water and soil losses.Sediment concentration in runoff collection tank is measured by stirring-sampling procedure,but this method may produce high measurement error due to the uneven mixing of collected sediments with water and soil particle deposition.This study aimed to identify the relationship between actual and measured sediment concentrations,so as to estimate the systematic error of sediment concentration measurement from runoff collection tank by traditional stirring-sampling procedure and the possibility to eliminate it.Four major soils including black soil,silt loess,clay loess,and purple soil in China were used to determine the correlation between the measured and designed sediment concentrations in laboratory.Tested sediment concentration was 1,2,5,8,10,20,50,80,100,200,500,800,and 1000 kg/m^(3),and total sediment-laden water volume was 50 L and 100 L.Five samples were collected successively from collection tank for each treatment and their sediment concentrations were measured by conventional oven-drying method.The results showed that all the measured sediment concentration values were smaller than the designed ones,but both the measured and designed values were linearly correlated significantly with determination coefficients greater than 0.8,generally.In the whole tested concentration range,the systematical error was-0.19 to-319.95 kg/m^(3) and relative error was 0.30%-84.5% for the 4 tested soils and 2 total sediment-laden water volumes.These results indicated a necessity and possibility to correct conventional sediment concentration measurement value.The result is usable to assess and correct the measurement error of sediment concentrations from traditional runoff plot.