A PREDICTIVE APPROACH TO THE IN-PLANE MECHANICAL PROPERTIES OF STITCHED COMPOSITE LAMINATES

This contribution attempts to model the alteration of the in-plane elastic properties in laminates caused by stitching, and to predict the in-plane effective tensile strength of the stitched composite laminates. The distortion of in-plane fibers is considered to be the main cause that affects the in-plane mechanical properties. A fiber distortion model is proposed to characterize the fiber misalignment and the fiber content concentration due to stitching. The undistorted region, the fiber distortion region, the resin-rich pocket and the through-thickness reinforcement section are taken into account. The fiber misalignment and inhomogeneous fiber content due to stitching have been formulated by introducing two parameters, the distortion width and maximum misalignment. It has been found that the ply stress concentration in stitched laminates is influenced by the two concurrent factors, the stitch hole and inhomogeneous fiber content. The stitch hole brings about the stress concentration whereas the higher fiber content at the local region induced by stitching restrains the local deformation of the composite. The model is used to predict the tensile strength of the [0/45/0/-45/90/45/0/-45]58 T300/QY9512 composite laminate stitched by Kevlar 29 yarn with different stitching configurations, showing an acceptable agreement with experimental data.

Mechanical Behavior and Microstructure Characterization of 3D Stitched Quartz Fibers-reinforced Silica Composites

The mechanical properties of silica material in the monolithic form are ;far from acceptable levels. In this paper, 3D stitched quartz preform was used for the fiber reinforcement, and quartz fibers- reinforced silica composites were prepared by the silica sol-infiltration-sintering method. The density of the composite was up to 1.71 g/cm3 after 10 infiltration-sintering cycles. The flexural strength and the in-plane shear strength were 61.7 MPa and 20.3 MPa, respectively. The flexural stress-deflection curve exhibited mostly nonlinear behavior, which was different from that of monolithic ceramics. Because of the existence of the fiber in Z axis direction, shearing property between the different layers of 3D stitched composites were greatly enhanced. Toughness effect of the 3D stitched quartz preform was conspicuous. The as-fabricated composites showed non-catastronhic failure behavior resulting from weak fiber/matrix interface.

Stitched Ground Planes for Textile Antenna Application: An Experimental Study

This paper presents an application of stitched ground plane for microstrip patch antenna design. In this work Matlab interface to computer embroidery techniques were used to implement the felt and denim substrates on microstrip patch antenna. These antennas were simulated using a commercial full 3D electromagnetic CST Microwave Studio 2019. A method to optimize the stitch patterns with conductive thread for antenna ground plane for 2.45 GHz industrial, scientific, and medical (ISM) band and 5 GHz wearable wireless local area networks (WLAN) frequencies was achieved. Rigid and flexible wearable antennas (microstrip patch antennas) were fabricated using the stitched ground plane. The electrical resistance was reduced between the meshes during the stitching design process. Results in terms of bandwidth, radiation patterns and reflection coefficients (S11) are presented.

Perceptual quality assessment of panoramic stitched contents for immersive applications:a prospective survey

The recent advancements in the field of Virtual Reality(VR)and Augmented Reality(AR)have a substantial impact on modern day technology by digitizing each and everything related to human life and open the doors to the next generation Software Technology(Soft Tech).VR and AR technology provide astonishing immersive contents with the help of high quality stitched panoramic contents and 360°imagery that widely used in the education,gaming,entertainment,and production sector.The immersive quality of VR and AR contents are greatly dependent on the perceptual quality of panoramic or 360°images,in fact a minor visual distortion can significantly degrade the overall quality.Thus,to ensure the quality of constructed panoramic contents for VR and AR applications,numerous Stitched Image Quality Assessment(SIQA)methods have been proposed to assess the quality of panoramic contents before using in VR and AR.In this survey,we provide a detailed overview of the SIQA literature and exclusively focus on objective SIQA methods presented till date.For better understanding,the objective SIQA methods are classified into two classes namely Full-Reference SIQA and No-Reference SIQA approaches.Each class is further categorized into traditional and deep learning-based methods and examined their performance for SIQA task.Further,we shortlist the publicly available benchmark SIQA datasets and evaluation metrices used for quality assessment of panoramic contents.In last,we highlight the current challenges in this area based on the existing SIQA methods and suggest future research directions that need to be target for further improvement in SIQA domain.

Novel Stitched Ground Plane Optimizations for Microstrip Patch Antennas at Wi-Fi and WiMAX Applications

This work explores the optimal mesh structure, stitch density and production technique of stitched ground plane for microstrip patch antenna. Meshed ground plane was used as a generic problem. A stitched ground plane is pro-posed and designed using Matlab interface to computer embroidery. Using the meshed or stitched ground plane as a case study, the resistance between meshes was analysed and measured. The equivalent resistance between nodes is a function of their distance apart. A finite resistive grid was simulated and compared to measured sets of data. A microstrip patch antenna with stitched ground shows comparable performance to the conventional etched ground of the size in terms of bandwidth. The stitched ground plane has a higher band-width than the etched copper ground plane because of the increased thickness of the substrate. Thus, it can be concluded that the use of the interface method shows the possibilities of controlling the stitch density and distances between mesh nodes. The interface increases the stitching density and reduces the elec-trical resistance between mesh nodes making the antennas flexible and weara-ble. The functionality of these antenna samples has been tested and validated using microstrip patch ground at 2.45 GHz and 5 GHz. Measurement results on the proposed stitched ground planes were compared with the theory of infinite resistive network that shows good agreement.

Controllable Crack Propagation in Off-Axis Crushing of Stitched Composite Absorbers

Crack growth resistance plays a different role in crashworthiness analysis since the progressive energy absorption is based on controllable fracture mechanisms. In this regard, the present paper studies the efficient crack growth resistance in off-axis crushing of composite tubular structures by implementing natural fiber yarns. One of the through-to-thickness reinforcement methods known as stitching has been chosen to influence the axial and off-axis crushing process. Improving the crack growth resistance and appropriate fiber breakage at different stages of crushing process can significantly improve the resistance force and consequently the energy absorption capability of composite absorbers in axial and off-axis crushing. This analysis will be applied to non-stitched and stitched CFRP composite boxes which showed brittle fracture and transverse shearing crushing modes under off-axis loading of 10 degrees. The analytical methods are also implemented to analysze the effect of various failure mechanisms such as bending, friction, bundle fracture, and interlaminar crack growth for the observed crushing modes. The proposed model is able to predict the crushing load and crush force efficiency in close agreement from experimental studies.

Low-Velocity Impact Response of Stitched Multi-layer Foam Sandwich Composites

Low-velocity impact damage known as“imperceptible”damage usually destroys the structural integrity of the material and seriously affects the service life of the materials.To improve the low-velocity impact resistance of foam sandwich composites,an innovative concept of a stitched multi-layer sandwich structure by organically combining the discrete splitting of foam layer with full thickness stitching was proposed,and its low-velocity impact resistance obtained through drop-hammer impact tests was explored.The results showed that the multi-layer foam sandwich structure acted as a stress disperser and reduced the irreversible impact damage.The depth and area of low-velocity impact damage of multi-layer foam sandwich composites gradually decreased with increasing the number of the layers.The stitched structure would improve the integrity of the foam sandwich composites and inhibit the propagation of cracks.The maximum impact load of the stitched foam sandwich composite increased by approximately 5% compared with that of the non-stitched material.In addition,the low-velocity impact damage depth,damage area and absorbed energy of the stitched three-layer foam sandwich composite were reduced by 37.7%,34.6% and 20.7%,respectively,compared with those of the non-stitched single-layer sandwich material.

In-Plane Elastic Properties of Stitched Plain Weave Composite Laminate

A representative volume element method and a novel mesomechanical-based polyline model are proposed to describe the misalignment of in-plane fibers induced by the insertion of stitch thread.A multi-scale mathematical model of in-plane elastic parameters for stitched composite laminate is established with ply-angle and stitch parameters as well as material parameters taken into account.Based on the fabrication of specimens and the verification of experimental platform,the superposition influences of stitch on structural anisotropy are revealed by the developed theoretical model.Results indicate that the stitch orientation can increase the structural anisotropy.The decreases of stitch pitch and spacing as well as the increase of thread diameter obviously reduce the elastic and shear moduli of laminates.Furthermore,the elastic and shear moduli as well as Poisson’s ratios show sinusoidal changes with a period of 90°as the ply-angle increases.The theoretical model not only analyzes the in-plane mechanical properties of stitched laminate with ply-angle,but also lays a foundation for the dynamic studies of stitched sandwich structures with ribs in the future.

Recent Situation of Acupuncture and Moxibustion in the Treatment of Stomach Pain with Deficiency and Cold of Spleen and Stomach

Stomachache is one of the most common diseases of digestive system, among which stomach pain of deficiency cold of spleen and stomach is the most common. Acupuncture and moxibustion therapy as an external treatment of traditional Chinese medicine for relieving stomach pain due to deficiency of spleen and stomach, has the advantages of convenient operation, small adverse reactions and remarkable curative effect, which is easy for patients to accept. In this paper, acupuncture and moxibustion therapy such as moxibustion and warm acupuncture therapy for stomach pain of spleen and stomach deficiency cold type is summarized to provide evidence-based basis for clinical treatment of stomach pain of spleen and stomach deficiency cold type.

Reduction of vibration by periodically stitched sandwich panel

This work reveals that the addition of periodically distributed stitches to sandwich structure enables a significant reduction of vibration in stop-band and this new functionality is systematically investigated.Firstly,a finite element model which is capable of taking into consideration the three layers of the sandwich as well as the stitches is developed.The diagram of dispersion is calculated by applying Floquet-Bloch theorem to the boundaries of unit cell.With properly chosen properties of stitches,a stop-band for flexural wave is observed.This stop-band is further confirmed by the forced response of a large stitched sandwich panel under point excitation.The level of vibration in the stop-band is significantly reduced.The influence of the stitch rigidity and density on upper and lower limits of stop-band is also examined,which confirms that stitched sandwich can be tuned to mitigate vibration in a certain frequency band with appropriate stitch properties.These investigations have demonstrated the potential application of stitched sandwich in the area of vibration reduction.

Tensile Mechanical Behavior and Failure Mechanism of a Plain-Woven SiCf/SiC Composites at Room and Elevated Temperatures

Ceramic matrix composites (CMCs) are the preferred materials for solving advanced aerospace high-temperature structural components;it has the comprehensive advantages of higher temperature (~1500˚C) and low density. In service environments, CMCs exhibit complex damage mechanisms and failure modes, which are affected by constituent materials, meso-architecture and inhere defects. In this paper, the in-plane tensile mechanical behavior of a plain-woven SiCf/SiC composite at room and elevated temperatures was investigated, and the factors affecting the tensile strength of the material were discussed in depth. The results show that the tensile modulus and strength of SiCf/SiC composites at high temperature are lower, but the fracture strain increases and the toughness of the composites is enhanced;the stitching holes significantly weaken the tensile strength of the material, resulting in the material is easy to break at the cross-section with stitching holes.

Research on Stitching Algorithm Based on Tree Branch Image

Branch identification technology is a key technology to achieve automated pruning of fruit tree branches, and one of its technical bottlenecks lies in the stitching of branch images. To this end, we propose a set of branch image stitching technology algorithms. The algorithm is based on the grey-scale prime centroid method to determine the detection feature points, and uses the coordinate transformation matrix H of the corresponding points of the image to carry out the image geometric transformation, and realises the feature matching through sample comparison and classification methods. The experimental results show that the matched point images are more correct and less time-consuming.

Stitch Fix 数据驱动的服装零售公司

Stitch Fix运用大数据技术改造甚至颠覆了传统的服装零售业,其数据驱动的新零售模式,对我国正在推动的大数据战略下的商业模式创新具有借鉴意义。2011年成立于美国旧金山的Stitch Fix是一家服装零售公司,同时也是一家大数据科技公司。除了提供自有服饰品牌外,Stitch Fix还提供700多个流行服装品牌,其商业模式充分展现了线上线下结合并以数据为驱动力的新零售业态。

Multi-camera calibration method based on minimizing the difference of reprojection error vectors

In order to achieve a high precision in three-dimensional（3D） multi-camera measurement system, an efficient multi-cameracalibration method is proposed. A stitching method of large scalecalibration targets is deduced, and a fundamental of multi-cameracalibration based on the large scale calibration target is provided.To avoid the shortcomings of the method, the vector differencesof reprojection error with the presence of the constraint conditionof the constant rigid body transformation is modelled, and mini-mized by the Levenberg-Marquardt （LM） method. Results of thesimulation and observation data calibration experiment show thatthe accuracy of the system calibrated by the proposed methodreaches 2 mm when measuring distance section of 20 000 mmand scale section of 7 000 mm × 7 000 mm. Consequently, theproposed method of multi-camera calibration performs better thanthe fundamental in stability. This technique offers a more uniformerror distribution for measuring large scale space.

Single row rotator cuff repair with modified technique

Rotator cuff tear is a common medical condition.We introduce various suture methods that can be used for arthroscopic rotator cuff repair,review the single row rotator cuff repair method with modified technique,and introduce the Ulsan-University(UU)stich.We compare the UU stitch with the modified Mason-Allen(MA)suture method.The UU stitch configuration is a simple alternative to the modified MA suture configuration for rotator cuff repair.

A Study on the Tensile Properties of the MWK Structures for Composite Reinforcement

In this paper, the tensile properties of the MWK structures produced with different basic stitches for composite reinforcement were experimentally studied. The results show that the MWK structures with the double loop pillar stitches have better mechanical properties.

A morphology-stitching method to improve Landsat SLC-off images with stripes

Stripes are artifacts in satellite images caused by various factors such as hardware defects. In some cases, these artifacts are introduced by some mitigating algorithms like Landsat SLC-off （Scan Line Corrector） gap-filling methods of LLHM （Local Linear Histogram Matching） and AWLHM （Adaptive Window Linear Histogram Matching）, which leave stripes as a byproduct. To improve Landsat SLC-off images with stripes,we propose an algorithm involving some hypothetical stripe-crossing stitch lines using the mean pixel value of the stitch lines.

Automatic video mosaicking algorithm via dynamic key-frame

Automatic video mosaicking is a challenging task in computer vision. Current researches consider either panoramic or mapping tasks on short videos. In this paper, an automatic mosaicking algorithm is proposed for both mapping and panoramic tasks based on the adapted key-frame on videos of any length.The speeded up robust features(SURF) and the grid motion statistic(GMS) algorithm are used for feature extraction and matching between consecutive frames, which are used to compute the transformation. In order to reduce the influence of the accumulated error during image stitching, an evaluation metric is put forward for the transformation matrix. Besides, a self-growth method is employed to stitch the global image for long videos. The algorithm is evaluated by using aerial-view and panoramic videos respectively on the graphic processing unit(GPU) device, which can satisfy the real-time requirement. The experimental results demonstrate that the proposed algorithm is able to achieve a better performance than the state-of-art.

Underwater Terrain Image Stitching Based on Spatial Gradient Feature Block

At present,underwater terrain images are all strip-shaped small fragment images preprocessed by the side-scan sonar imaging system.However,the processed underwater terrain images have inconspicuous and few feature points.In order to better realize the stitching of underwater terrain images and solve the problems of slow traditional image stitching speed,we proposed an improved algorithm for underwater terrain image stitching based on spatial gradient feature block.First,the spatial gradient fuzzy C-Means algorithm is used to divide the underwater terrain image into feature blocks with the fusion of spatial gradient information.The accelerated-KAZE(AKAZE)algorithm is used to combine the feature block information to match the reference image and the target image.Then,the random sample consensus(RANSAC)is applied to optimize the matching results.Finally,image fusion is performed with the global homography and the optimal seam-line method to improve the accuracy of image overlay fusion.The experimental results show that the proposed method in this paper effectively divides images into feature blocks by combining spatial information and gradient information,which not only solves the problem of stitching failure of underwater terrain images due to unobvious features,and further reduces the sensitivity to noise,but also effectively reduces the iterative calculation in the feature point matching process of the traditional method,and improves the stitching speed.Ghosting and shape warping are significantly eliminated by re-optimizing the overlap of the image.

Removal of laparoscopic cerclage stitches via laparotomy and rivanol-induced labour: A case report and literature review

BACKGROUND Laparoscopic cervical cerclage is performed for patients with abnormal cervical anatomy and/or transvaginal cervical cerclage failure.However,the method of removing the stitches to allow labour induction remains controversial.According to published literature,stitches are removed through laparoscopic or transvaginal methods.Herein,we report,for the first time,a case of a patient who had undergone laparoscopic cerclage,and then underwent removal of stitches by laparotomy and labour induction in the third trimester of pregnancy.CASE SUMMARY A patient who underwent laparoscopic cervical cerclage due to cervical insufficiency became pregnant naturally following the operation.At 31 wk of pregnancy,severe foetal malformations were found.To successfully induce labour,cerclage stitches were removed via laparotomy,and rivanol was injected directly into the uterus.Following successful induction of labour,the patient delivered a dead foetus.CONCLUSION This report provides a reliable scheme of removing cerclage stitches for patients who have undergone laparoscopic cerclage but experience severe foetal malformations.