Natural stone aggregate forms the bulk volume of concrete and has contributed to the increased cost of concrete production. This has led to the search for alternate aggregates such as lateritic stone for concrete prod...Natural stone aggregate forms the bulk volume of concrete and has contributed to the increased cost of concrete production. This has led to the search for alternate aggregates such as lateritic stone for concrete production. This paper investigates the engineering properties of concrete produced with lateritic aggregate (LA) as the coarse aggregate replacement and coconut husk fibre (CHF) as reinforcement. Natural stone aggregate was replaced by LA at 0%, 10%, 20%, 30%, 40%, and 50%, with 0.25% constant CHF by weight. A mix proportion of 1:1.5:3 with a water-cement ratio of 0.6 was used for producing concrete. A total of 162 specimens (90 cubes and 72 beams) were prepared and tested at the 7, 14, 21, and 28 days of curing. The highest compressive strength was 43.36 N/mm2 (10% LA replacement) as compared to the control of 41.51 N/mm2. The 10% LA replacement obtained the highest flexural strength of 5.35 N/mm2 as compared with the 5.29 N/mm2 for the control. The water absorption of the concrete increased from 2.8% (control) to 3.57% (50% replacement LA). Scanning electron microscopy (SEM) revealed micro gaps between CHF and LA concrete. The study, therefore, concludes that the use of LA and CHF positively influenced the strength properties of concrete. 10% LA replacement of coarse aggregate and 0.25% CHF is recommended to practitioners for use.展开更多
Most of the construction materials research now concerns on investigation of construction materials that is locally produced at a rate and cost compatible with the pace of construction. The present paper is concerned ...Most of the construction materials research now concerns on investigation of construction materials that is locally produced at a rate and cost compatible with the pace of construction. The present paper is concerned with investigation of fresh and hardened properties of self-compacting concrete (SCC) produced from local available materials in JORDAN. The produced SCC contains the local stone cut waste powder which is called Al-KHAMKHA in JORDAN with different replacement of (0%, 10%, and 25%) of fine silica aggregate;?the study also investigatesthe effects of SP33 super?plasticizer which is used by different doses (1%, 1.5% and 2%) for cement. The slump flow and the compressive strength of SCC were studied and the experimental results indicate the possibility of using Al-KHAMKHA in the production of SCC as the results showed that the compressive strength of the SCC with 10 % replacement by al-khamkha together with 1% SP33?super plasticizer was higher compared to pure SCC without al-khamkha;?the results also showed that as al-khamkha content increased the slump flow decreased.展开更多
文摘Natural stone aggregate forms the bulk volume of concrete and has contributed to the increased cost of concrete production. This has led to the search for alternate aggregates such as lateritic stone for concrete production. This paper investigates the engineering properties of concrete produced with lateritic aggregate (LA) as the coarse aggregate replacement and coconut husk fibre (CHF) as reinforcement. Natural stone aggregate was replaced by LA at 0%, 10%, 20%, 30%, 40%, and 50%, with 0.25% constant CHF by weight. A mix proportion of 1:1.5:3 with a water-cement ratio of 0.6 was used for producing concrete. A total of 162 specimens (90 cubes and 72 beams) were prepared and tested at the 7, 14, 21, and 28 days of curing. The highest compressive strength was 43.36 N/mm2 (10% LA replacement) as compared to the control of 41.51 N/mm2. The 10% LA replacement obtained the highest flexural strength of 5.35 N/mm2 as compared with the 5.29 N/mm2 for the control. The water absorption of the concrete increased from 2.8% (control) to 3.57% (50% replacement LA). Scanning electron microscopy (SEM) revealed micro gaps between CHF and LA concrete. The study, therefore, concludes that the use of LA and CHF positively influenced the strength properties of concrete. 10% LA replacement of coarse aggregate and 0.25% CHF is recommended to practitioners for use.
文摘Most of the construction materials research now concerns on investigation of construction materials that is locally produced at a rate and cost compatible with the pace of construction. The present paper is concerned with investigation of fresh and hardened properties of self-compacting concrete (SCC) produced from local available materials in JORDAN. The produced SCC contains the local stone cut waste powder which is called Al-KHAMKHA in JORDAN with different replacement of (0%, 10%, and 25%) of fine silica aggregate;?the study also investigatesthe effects of SP33 super?plasticizer which is used by different doses (1%, 1.5% and 2%) for cement. The slump flow and the compressive strength of SCC were studied and the experimental results indicate the possibility of using Al-KHAMKHA in the production of SCC as the results showed that the compressive strength of the SCC with 10 % replacement by al-khamkha together with 1% SP33?super plasticizer was higher compared to pure SCC without al-khamkha;?the results also showed that as al-khamkha content increased the slump flow decreased.
