Boosting Hydrogen Storage Performance of MgH_(2) by Oxygen Vacancy-Rich H-V_(2)O_(5) Nanosheet as an Excited H-Pump

MgH_(2) is a promising high-capacity solid-state hydrogen storage material,while its application is greatly hindered by the high desorption temperature and sluggish kinetics.Herein,intertwined 2D oxygen vacancy-rich V_(2)O_(5) nanosheets(H-V_(2)O_(5))are specifically designed and used as catalysts to improve the hydrogen storage properties of MgH_(2).The as-prepared MgH_(2)-H-V_(2)O_(5) composites exhibit low desorption temperatures(Tonset=185℃)with a hydrogen capacity of 6.54 wt%,fast kinetics(Ea=84.55±1.37 kJ mol^(-1) H_(2) for desorption),and long cycling stability.Impressively,hydrogen absorption can be achieved at a temperature as low as 30℃ with a capacity of 2.38 wt%within 60 min.Moreover,the composites maintain a capacity retention rate of~99%after 100 cycles at 275℃.Experimental studies and theoretical calculations demonstrate that the in-situ formed VH_(2)/V catalysts,unique 2D structure of H-V_(2)O_(5) nanosheets,and abundant oxygen vacancies positively contribute to the improved hydrogen sorption properties.Notably,the existence of oxygen vacancies plays a double role,which could not only directly accelerate the hydrogen ab/de-sorption rate of MgH_(2),but also indirectly affect the activity of the catalytic phase VH_(2)/V,thereby further boosting the hydrogen storage performance of MgH_(2).This work highlights an oxygen vacancy excited“hydrogen pump”effect of VH_(2)/V on the hydrogen sorption of Mg/MgH_(2).The strategy developed here may pave a new way toward the development of oxygen vacancy-rich transition metal oxides catalyzed hydride systems.

Phase structure and electrochemical properties of La_(0.7)Ce_(0.3)Ni_(3.75)Mn_(0.35)Al_(0.15)Cu_(0.75-x)Fe_x hydrogen storage alloys

La0.7Ce0.3Ni3.75Mn0.35Al0.15Cu0.75-xFex （x=0-0.20） hydrogen storage alloys were synthesized by induction melting and subsequent annealing treatment, and phase structure and electrochemical characteristics were investigated. All alloys consist of a single LaNi5 phase with CaCu5 structure, and the lattice constant a and the cell volume （V） of the LaNi5 phase increase with increasing x value. The maximum discharge capacity gradually decreases from 319.0 mA？h/g （x=0） to 291.9 mA？h/g （x=0.20） with the increase in x value. The high-rate dischargeability at the discharge current density of 1200 mA/g decreases monotonically from 53.1% （x=0） to 44.2% （x=0.20）. The cycling stability increases with increasing x from 0 to 0.20, which is mainly ascribed to the improvement of the pulverization resistance.

Metal organic framework supported niobium pentoxide nanoparticles with exceptional catalytic effect on hydrogen storage behavior of MgH_(2)

Nb_(2)O_(5)nanoparticles with an average particle size of 10 nm supported on a rhombic dodecahedral metal organic framework(MOF)were successfully synthesized by a facile one-pot hydrothermal reaction and subsequent calcination process.Experimental results demonstrated that the prepared catalyst drastically improved the hydrogen storage behavior of MgH_(2).7 wt%Nb_(2)O_(5)@MOF doped MgH_(2)started to desorb hydrogen at 181.9℃and 6.2 wt%hydrogen could be released within 2.6 min and 6.3 min at 275℃and 250℃,respectively.The fully dehydrogenated composite also displayed excellent hydrogenation by decreasing the onset absorption temperature to 25℃and taking up4.9 wt%and 6.5 wt%hydrogen within 6 min at 1750C and 1500C,respectively.Moreover,the corresponding activation energy was calculated to be 75.57±4.16 kJ mol^(-1)for desorption reaction and 51.38±1.09 kJ mol^(-1)for absorption reaction.After 20 cycles,0.5 wt%hydrogen capacity was lost for the MgH_(2)+7 wt%Nb_(2)O_(5)@MOF composite,much lower than 1.5 wt%of the MgH_(2)+7 wt%Nb_(2)O_(5)composite.However,the addition of Nb_(2)O_(5)@MOF had limited effect on reducing the dehydrogenation enthalpy of MgH_(2).Microstructure analysis revealed that Nb_(2)O_(5)particles were uniformly distributed on surface of the MgH_(2)matrix and synergistically improved the hydrogen storage property of MgH_(2)with MOF.

Effects of Strip Casting and Annealing on Electrochemical Properties of LPCNi_(3.55)Co_(0.75)Mn_(0.4)Al_(0.3) Hydrogen Storage Alloys

The effect of thickness (1 similar to 10 mm) of the ingots on the electrochemical properties of as-cast and annealed strip cast LPCNi3.55Co0.75Mn0.4Al0.3 hydrogen storage alloys was investigated. It is found that the 0.2 C discharge capacity of as-cast LPCNi3.55Co0.75Mn0.4Al0.3 alloy increases with the increase of the thickness of the ingots. As-east alloy with the thickness of 10 mm shows better activation property, higher 1C discharge capacity and better cyclic stability than others. It is mainly contributed to its larger unit cell volume and less internal stress. Annealed LPCNi3.55Co0.75Mn0.4Al0.3 alloy with the thickness of 3 mm shows much better comprehensive electrochemical properties than as-east one; The cyclic. stability of the alloy with the thickness of 6 mm and the activation properties of the alloys with the thickness of 3 similar to 6 mm are improved after annealing. It is mainly owing to the great release of internal stress and the decrease of the segregation of Mn in the alloys.

Hierarchically Structured Nb_(2)O_5 Microflowers with Enhanced Capacity and Fast-Charging Capability for Flexible Planar Sodium Ion Micro-Supercapacitors

Planar Na ion micro-supercapacitors(NIMSCs) that offer both high energy density and power density are deemed to a promising class of miniaturized power sources for wearable and portable microelectron-ics. Nevertheless, the development of NIMSCs are hugely impeded by the low capacity and sluggish Na ion kinetics in the negative electrode.Herein, we demonstrate a novel carbon-coated Nb_(2)O_5 microflower with a hierarchical structure composed of vertically intercrossed and porous nanosheets, boosting Na ion storage performance. The unique structural merits, including uniform carbon coating, ultrathin nanosheets and abun-dant pores, endow the Nb_(2)O_5 microflower with highly reversible Na ion storage capacity of 245 mAh g^(-1) at 0.25 C and excellent rate capability.Benefiting from high capacity and fast charging of Nb_(2)O_5 microflower, the planar NIMSCs consisted of Nb_(2)O_5 negative electrode and activated car-bon positive electrode deliver high areal energy density of 60.7 μWh cm^(-2),considerable voltage window of 3.5 V and extraordinary cyclability. Therefore, this work exploits a structural design strategy towards electrode materials for application in NIMSCs, holding great promise for flexible microelectronics.

Research of heat treatment of low-Co AB_5 type hydrogen storage alloys for MH-Ni batteries

The effects of low-Co AB_5 type hydrogen storage alloys prepared by quenchingand annealing on the performances of MH-Ni batteries were investigated, and the characteristics ofthe low-Co AB_5 type hydrogen storage alloys were compared with those of the high-Co AB_5 typehydrogen storage alloy as well. The results showed that the faster the cooling of the low-Cohydrogen storage alloy is, the better homogeneity of the chemical composition for the alloy and thelonger cycle life of the battery are, but the electrochemical discharge capacity and high-ratedischarge ability are reduced. The high-rate discharge ability and charge retention of MH-Nibatteries for the conventional as-cast annealed low-Co hydrogen storage alloy were superior to thosefor the rapidly quenched low-Co hydrogen storage alloy and the high-Co hydrogen storage alloy, buta little inferior in the cycle life.

Optimal configuration for photovoltaic storage system capacity in 5G base station microgrids

Base station operators deploy a large number of distributed photovoltaics to solve the problems of high energy consumption and high electricity costs of 5G base stations.In this study,the idle space of the base station’s energy storage is used to stabilize the photovoltaic output,and a photovoltaic storage system microgrid of a 5G base station is constructed.Aiming at the capacity planning problem of photovoltaic storage systems,a two-layer optimal configuration method is proposed.The inner layer optimization considers the energy sharing among the base station microgrids,combines the communication characteristics of the 5G base station and the backup power demand of the energy storage battery,and determines an economic scheduling strategy for each photovoltaic storage system with the goal of minimizing the daily operation cost of the base station microgrid.The outer model aims to minimize the annual average comprehensive revenue of the 5G base station microgrid,while considering peak clipping and valley filling,to optimize the photovoltaic storage system capacity.The CPLEX solver and a genetic algorithm were used to solve the two-layer models.Considering the construction of the 5G base station in a certain area as an example,the results showed that the proposed model can not only reduce the cost of the 5G base station operators,but also reduce the peak load of the power grid and promote the local digestion of photovoltaic power.

Optimal configuration of 5G base station energy storage considering sleep mechanism

The high-energy consumption and high construction density of 5G base stations have greatly increased the demand for backup energy storage batteries.To maximize overall benefits for the investors and operators of base station energy storage,we proposed a bi-level optimization model for the operation of the energy storage,and the planning of 5G base stations considering the sleep mechanism.A multi-base station cooperative system composed of 5G acer stations was considered as the research object,and the outer goal was to maximize the net profit over the complete life cycle of the energy storage.Furthermore,the power and capacity of the energy storage configuration were optimized.The inner goal included the sleep mechanism of the base station,and the optimization of the energy storage charging and discharging strategy,for minimizing the daily electricity expenditure of the 5G base station system.Additionally,genetic algorithm and mixed integer programming were used to solve the bi-level optimization model,analyze the numerical example test comparison of the three types of batteries and the net income of the configuration,and finally verify the validity of the model.Furthermore,the sleep mechanism,the charging and discharging strategy for energy consumption,and the economic benefits for the operators were investigated to provide reference for the 5G base station energy storage configuration.

Crystal structure and hydrogen storage properties of(La,Ce)Ni_(5-x)M_x(M = Al, Fe, or Co) alloys

The effects of partial substitution of La by Ce and Ni by Al, Fe, or Co in LaNi_5-based alloys on hydrogen storage performance were systematically studied. All samples were prepared using vacuum arc melting in an argon atmosphere. The results showed that for LaNi_(5-x)M_x(M = Al, Fe, or Co) alloys, the lattice constants and unit cell volumes increased with an increasing amount of Al and Fe. On the other hand, these parameters decreased upon partial substitution of La by Ce. In addition, the lattice constant remained almost constant in the La_(0.6)Ce_(0.4)Ni_(5–x)Cox alloys regardless of the value of x(x = 0.3, 0.6, or 0.9), as Ce might enhance the homogeneity of the CaCu_5-type phase in Co-containing alloys. The hydrogen storage properties of the alloys were investigated using pressure, composition, and temperature isotherms. The experimental results showed that the plateau pressure decreased with an increasing content of Al, Fe, or Co, but it increased with Ce addition. Furthermore, the plateau pressures of all Co-containing alloys were almost identical upon substitution with Ce. Finally, the enthalpy(ΔH) and entropy(ΔS) values for all alloys were calculated using van't Hoff plots. The relationship between the lattice parameters and enthalpy changes for hydrogenation will be discussed.

基于前吸收理论0~6℃的5%葡萄糖喷雾用于胃肠肿瘤患者术后口干症的效果

目的:评价0~6℃的5%葡萄糖喷雾对胃肠肿瘤患者术后口干症的效果。方法:选择2019年11月—2022年5月择期行胃肠肿瘤手术的患者220例,性别不限,年龄22~78岁,体质量指数(BMI)≤30 kg/m^(2),美国标准协会(ASA)Ⅰ或Ⅱ级,将其分为喷雾组(R组)和对照组(S组)。R组给予0~6℃的5%葡萄糖喷雾干预,S组给予常规棉签湿化干预。比较两组患者术前(t_(0))、拔管即刻(t_(1))、出麻醉复苏室(PACU)(t_(2))、术后2 h(t_(3))、术后6 h(t_(4))五个时间点的静息唾液流率、口腔黏膜湿润度和口腔舒适度评分;比较两组患者术后烦躁、焦虑等并发症的发生情况及患者满意度。结果:与S组相比,干预后R组患者的唾液流率明显提高,口腔黏膜湿润度明显提升,口腔舒适度评分明显增高,术后呛咳、烦躁和焦虑发生率明显下降,患者的满意度提升(P<0.05)。结论:0~6℃的5%葡萄糖喷雾较常规棉签湿化口腔护理干预可更有效减轻口渴程度,提高患者口腔黏膜湿润度和口腔舒适度,减少术后并发症,提高患者的满意度。

Electrochemical Properties of Strip Casting LPCNi_(3.55) Co_(0.75) Mn_(0.4) Al_(0.3) Hydrogen Storage Alloys

LPCNi 3.55 Co 0.75 Mn 0.4 Al 0.3 hydrogen storage alloy was investigated, and the effects of thickness of its strip casting ingots(as cast) on the electrochemical performances were discussed. It was found that the 0.2 C discharge capacity increased with the increase of the thickness (from 1 mm to 10 mm) of the ingots, mainly due to the enlargement of the unit cell volume; Among the thickness of the ingots in our study, 10 mm sample showed a better activation property; LPCNi 3.55 Co 0.75 Mn 0.4 Al 0.3 alloy with 10mm showed higher comprehensive properties than those with other thickness under 1C rate.

The Popularization and Application of Cold Storage Red Blood Cells or Whole Blood at -80 ℃ of the Rh(D) Negative Patients in Surgical Operation

Summary: The efficiency of cold storage red blood cells (CSRBC) or whole blood at -80 ℃ used in 27 Rh(D) negative patients during surgical operation was reported. The Rh(D) negative patients received the transfusion of CSRBC or whole blood stored at -80 ℃ for 180 to 360 days. The changes in the indexes, such as blood TB, DB, K +, Na +, BUN, Cr, urine protein (URPO), UOB, Hb, HCT, serum total protein, relative to hemolytic reaction and blood volume before and after transfusion were observed. The results showed that after transfusion of CSRBC or whole blood 27 cases were negative for urine protein and UOB, and the levels of BUN and Cr were normal (P>0.05). Blood TB, DB, Hb, and HCT were increased, while pH, blood K + and blood Na + was normal with the difference being not significant before and after operation (P>0.05). Plasma protein was decreased, but there was no significant difference before and after operation (P>0.05). It was suggested that CSRBC or whole blood at -80 ℃ could be safely infused to the Rh(D) negative patients without side effects during the surgical operation.

3D porous V2O5 architectures for high-rate lithium storage

The discovery of novel electrode materials promises to unleash a number of technological advances in lithium-ion batteries.V2O5 is recognized as a high-performance cathode that capitalizes on the rich redox chemistry of vanadium to store lithium.To unlock the full potential of V2O5,nanotechnology solution and rational electrode design are used to imbue V2O5 with high energy and power density by addressing some of their intrinsic disadvantages in macroscopic crystal form.Here,we demonstrate a facile and environmental-friendly method to prepare nanorods-constructed 3D porous V2O5 architectures(3 D-V2O5)in large-scale.The 3D porous architecture is found to be responsible for the enhanced charge transfer kinetics and Li-ion diffusion rate of the 3D-V2O5 electrode.As the result,the 3D-V2O5 surpasses the conventional bulk V2O5 by showing enhanced discharge capacity and rate capability(delivering 154 and 127 m Ah g^-1 at 15 and 20 C,respectively).

Electronic Structure of Hydrogen Storage Compounds, LaNi_5 and Its Micro-Hydrogenated Compounds

The electronic structures of LaNi5 hydrogen storage alloys and its micro-hydrogenated compounds with two hydrogen atoms in the center of two octahedral interstices and two tetrahedral interstices, were investigated by the first principles discrete variational method （DVM）. The results of density of states and the difference of charge distribution clearly show that the s electrons of H mainly interact with the s electrons of hydride-non-forming element Ni, despite there being a larger affinity of La for hydrogen than that of Ni in pure metal-hydrogen system. From the cohesive energy of systems, we also found two systems have almost same stability with occupation of H atoms.

AB_5-type Hydrogen Storage Alloy Modified with Ti/Zr Used as Anodic Materials in Borohydride Fuel Cell

Fuel cell using borohydride as the fuel has received much attention. AB5-type hydrogen storage alloy used as the anodic material instead of noble metals has been investigated. In order to restrain the generation of hydrogen and enhance the utilization of borohydride, Ti/Zr metal powders has been added into the parent LmNi4.78Mn0.22 （where Lm is La-richened mischmetal） alloy （LNM） by ball milling and heat treatment methods. It is found that the addition of Ti/Zr metal powders lowers the electrochemical catalytic activity of the electrodes, at the same time, restrains the generation of hydrogen and enhances the utilization of the fuel. All the results show that the hydrogen generation rate or the utilization of the fuel is directly relative to the electrochemical catalytic activity or the discharge capability of the electrodes. The utilization of the fuel increases with discharge current density. It is very important to find a balance between the discharge capability and the utilization of the fuel.

F-doped orthorhombic Nb_(2)O_(5) exposed with 97% (100) facet for fast reversible Liþ-Intercalation

Orthorhombic Nb_(2)O_(5)(T-Nb_(2)O_(5))is attractive for fast-charging Li-ion batteries,but it is still hard to realize rapid charge transfer kinetics for Li-ion storage.Herein,F-doped T-Nb_(2)O_(5) microflowers(F-Nb_(2)O_(5))are rationally synthesized through topotactic conversion.Specifically,F-Nb_(2)O_(5) are assembled by single-crystal nanoflakes with nearly 97%exposed(100)facet,which maximizes the exposure of the feasible Li^(+)transport pathways along loosely packed 4g atomic layers to the electrolytes,thus effectively enhancing the Li^(+)-intercalation performance.Besides,the band gap of F-Nb_(2)O_(5) is reduced to 2.87 eV due to the doping of F atoms,leading to enhanced electrical conductivity.The synergetic effects between tailored exposed crystal facets,F-doping,and ultrathin building blocks,speed up the Li^(+)/electron transfer kinetics and improve the pseudocapacitive properties of F-Nb_(2)O_(5).Therefore,F-Nb_(2)O_(5) exhibit superior rate capability(210.8 and 164.9 mAh g^(-1) at 1 and 10 C,respectively)and good long-term 10 C cycling performance(132.7 mAh g^(-1) after 1500 cycles).

基于ERA5-Land数据的1961-2020年喜马拉雅山地区气温变化特征

喜马拉雅山地区气温对全球气候变化敏感。由于海拔高、数据获取难度大,已有研究对喜马拉雅山区气候变化的认识并不充分。本研究基于高分辨率ERA5-Land数据,分析1961—2020年喜马拉雅山地区气温时空变化特征,评估其在喜马拉雅山地区的适用性。结果表明:(1)1961—2020年喜马拉雅山整体以0.13℃/10a的速率升温,但自1990年后升温速率显著增大至0.20℃/10a,以秋冬季变暖最为显著。(2)空间上,北坡升温高于南坡,东段升温快于西段。升温导致年平均0℃等温线上升100 m,且0℃等温线季节差异显著,其中秋季升高可达161 m,而春季升高仅70 m。(3)喜马拉雅山地区气温垂直变化存在海拔依赖性特征,中、东段升温峰值区位于海拔4000~5500 m处,而西段升温峰值区位于海拔3000~4000 m处。1961—2020年喜马拉雅山高海拔地区积雪面积快速减少,导致地表反照率降低进而地表吸收太阳辐射增加,形成气温升高—反照率降低—气温进一步升高的正反馈过程,这是高海拔升温显著的重要原因。全面认识喜马拉雅山高海拔地区气温的时空演变规律有利于应对变暖所导致的环境问题并提出相应策略。

Efficiently enhanced energy storage performance of Ba_(2)Bi_(4)Ti_(5)O_(18) film by co-doping Fe^(3+)and Ta^(5+)ion with larger radius

We present an efficient strategy,that is the co-substitution of Fe^(3+)and Ta^(5+)ions with large radius for Ti^(4+)ion,to enhance energy storage performance of Ba_(2)Bi_(4)Ti_(5)O_(18) film.For the films co-doped with Fe^(3+)and Ta^(5+)ions,the maximum polarization under the same external electric field is improved because the radius of Fe^(3+)and Ta^(5+)ions is larger than that of Ti^(4+)ion.Moreover,due to the composition and chemical disorder,the relaxor properties are also slightly improved,which can not be achieved by the film doped with Fe^(3+)ions only.What is more,for the films doped with Fe^(3+)ion only,the leakage current density increases greatly due to the charge imbalance,resulting in a significant decrease in breakdown strength.It is worth mentioning that the breakdown strength of Fe^(3+)and Ta^(5+)ions co-doped film does not decrease due to the charge balance.Another important point is the recoverable energy storage density of the films co-doped with Fe^(3+)and Ta^(5+)ions has been greatly improved based on the fact that the maximum external electric field does not decrease and the maximum polarization under the same external electric field increases.On top of that,the hysteresis of the polarization has also been improved.Finally,the co-doped films with Fe^(3+)and Ta^(5+)ions have good frequency and temperature stability.

Surface Modification of AB_2 and AB_5 Hydrogen Storage Alloy Electrodes by the Hot-Charging Treatment

The effect of the hot-charging treatment on the performance of AB(2) and AB(5) hydrogen storage alloy electrodes was investigated. The result showed that the treatment can markedly improve the voltage plateau ratio (VPR), the high rate discharge ability (HRDA), the diffusion coefficient of hydrogen DH and the discharge capacity of the AB2 hydrogen storage alloy electrode. The SEM analysis showed that the hot-charging treatment brings about a Ni-rich surface due to the dissolution of Zr oxides. It is also very helpful for the improvement of the kinetic properties of AB2 hydrogen storage alloy electrode because the microcracking of the surface results in fresh surface. This can be the basic modification treatment for NiMH battery used in electric vehicles (EVs) in the future. But for AB(5) type alloys, the treatment has the disadvantage of impairing the comprehensive electrochemical properties, because the surface of the alloy may be corroded during the treatment. The mechanism of the surface modification of the electrode is also proposed.

Research on the New Mobile Development Paradigm based on HTML5 and Database Storage Optimization Techniques

In this paper, we conduct research on the new mobile development paradigm based on the HTML5 and core database storage optimization techniques. With the development of mobile Internet technology and the popularity of smart mobile devices, mobile Internet is becoming more and more obvious in the importance of life, mobile application development is also becoming more and more important. The current mainstream development include the mode of traditional native application development, Web application development based on it, and based on the mixed mode of third-party framework development. The practice of software engineering, points out that productivity of the software breakthrough is the introduction of basic software reuse. Object-oriented framework is an important research content in modern software engineering. Under this basis, we propose the related optimization countermeasures for systematic modifi cation that is meaningful.