Investigation on Magnetorheological Effect of Novel Self-healing Magnetorheological Elastomers

Magnetorheological elastomers(MREs)hold significant promise in various fields such as automotive engineering,and civil engineering,where they serve as intelligent materials.Depending on the application of an external magnetic field,these materials exhibit varying magnetorheological and viscoelastic properties,including shear stress,yield stress,dynamic moduli,and damping.In this work,a new type of MRE,termed self-healing MREs(SH-MREs),has been developed by adding a novel self-healing agent into existing MREs.The dynamic modulus and loss factor of SH-MREs with different compositions have been characterized under various conditions of frequency,temperature,and strain.The results show that as the strain value increases,the loss factor also increases.Moreover,the loss factor initially increases and then decreases with increasing magnetic field strength.Although higher concentrations of ferromagnetic particles increase the loss factor,they enhance the operational range due to their better responsiveness to magnetic fields.SH-MREs demonstrate improved damping capabilities,attributed to the formation of coordination bonds between ferromagnetic particles and the self-healing agent.The stable structure increases the viscosity of MREs.The results of the regression model suggest a direct proportionality between sensitivity to the magnetic field and the ferromagnetic particle concentration.

Effect of ionic strength and mixing ratio on complex coacervation of soy protein isolate/Flammulina velutipes polysaccharide

Soy protein isolate(SPI)is a commercial protein with balanced amino acids,while the poor solubility impedes its use in traditional foods.To overcome the problem,the complex coacervation of SPI/Flammulina velutipes polysaccharide(FVP)were investigated.Initial results revealed that the suitable amounts of FVP contributed to reducing the turbidity of SPI solution.Under electrostatic interaction,the formation of SPI/FVP coacervates were spontaneous and went through a nucleation and growth process.Low salt concentration(C_(NaCl)=10,50 mmol/L)led to an increase in the critical pH values(pHc,pHφ1)while the critical pH values decreased when C_(NaCl)≥100 mmol/L.The concentration of NaCl ions increased the content ofα-helix.With the increase of FVP,the critical pH values decreased and the content ofβ-sheet increased through electrostatic interaction.At SPI/FVP ratio of 10:1 and 15:1,the complex coacervation of SPI/FVP were saturated,and the coacervates had the same storage modulus value.SPI/FVP coacervates exhibited solid-like properties and presented the strongest storage modulus at C_(NaCl)=50 mmol/L.The optimal pH,SPI/FVP ratio and NaCl concentration of complex coacervation were collected,and the coacervates demonstrated a valuable application potential to protect and deliver bioactives and food ingredients.

Rheological behavior of fumed silica suspension in polyethylene glycol

The rheological behavior of fumed silica suspensions in polyethylene glycol(PEG) was studied at steady and oscillatory shear stress using AR 2000 stress controlled rheometer. The systems show reversible shear thickening behavior and the shear-thickening behavior can be explained by the clustering mechanism. The viscosity and the degree of shear-thickening of the systems strongly depend on the mass fraction of the silica, the molecular weigh of PEG and the frequency used in the rheological measurement. The silica volume fraction of the systems is 1.16% 3.62%, corresponding to the mass fraction of 4%9%. The shear-thickening taking place in the low volume fraction may contribute to the fractal nature of the silica. At oscillatory shear stress, when the shear stress is less than the critical stress, the storage modulus decreases significantly, meanwhile the loss modulus and the complex viscosity almost remain unchanged; when the shear stress is larger than the critical stress, the storage modulus, the loss modulus and the complex viscosity increase with the increase of shear stress. The loss modulus is larger than the storage modulus in the range of stress studied and both moduli depend on frequency.

Visco-elastic Properties of VES Diverting Acid for Carbonate Reservoirs

Storage modulus and loss modulus is the main performance index of visco-elastic properties.In this paper the storage modulus and loss modulus of a new diverting acid and their influencing factors were systematically investigated.Besides,the constitutive equations of the diverting acid at different temperatures were elicited from shearing experiments,which show that the visco-elastic surfactant(VES)acid system is a non-Newtonian power law fluid at low temperature and a Newtonian fluid at high temperature.The storage modulus and loss modulus at different temperatures,pH,and VES content in the acid are critical for the design of acid stimulation for oil well,especially when the VES acid is used in this field only on trial and the basic data are in urgent needed for the design and construction of the acidification stimulation.

Experimental Study on the Viscoelastic Behaviors of Debris Flow Slurry

The rheological properties of most liquid in nature are between liquids and solids, including both elastic changes and viscosity changes, that is socalled ＂viscoelastic＂. Dynamic oscillatory test was used to quantitatively study the distinct viscoelastic behaviors of debris flow slurry in the shear stress conditions for the first time in this study. The debris flow slurry samples were from Jiangjiagou Ravine, Yunnan Province, China. The experimental results were found that at the low and middle stages of shearing, when the angular velocity 09〈72.46 s-1, the loss modulus （G was greater than the storage modulus （G3, i.e. G＂〉G＇. At the late stage of shearing, when the angular velocity co-72.46 s-x, the storage modulus was greater than or equal to the loss G = G, tan -〈 1 （where phase-shift modulus, i.e. ＇ 〉 ＂ angle 5=G＂,/G3, and the debris flow slurry was in a gel state. Therefore, the progress of this experimental study further reveals the mechanism of hyperconcentrated debris flows with a high velocity on low-gradient ravines.

POLYMER NETWORK-POLY(ETHYLENE GLYCOL)COMPLEXES WITH SHAPE MEMORY EFFECT

The complexes of poly(methacrylic acid-co-methyl methacrylate) network with poly(ethylene glycol) stabilized byhydrogen bonds were prepared. By introducing the poly(ethylene glycol), a large difference in storage modulus below andabove the glass transition temperature occurred and the complexes exhibited shape memory behaviors. The morphology ofcomplexes was studied by using DSC, WAXD, and DMA. The results indicate that the fixed phase of this kind of novelshape memory materials is the network, and the reversible phase is the amorphous state of PEG:PMAA complex phase. Theshape recoverability almost reaches 100%. This type of complexes can be regarded as a novel shape memory network.

Reinforcing Effect of Organo-Modified Fillers in Rubber Composites as Evidenced from DMA Studies

The use of organically enhanced kaolin clay as reinforcing filler for NR(natural rubber)and blends of NR with NBR(nitrile-butadiene rubber)and poly BR(butadiene rubber)system were investigated on the basis of DMA(dynamic mechanical analysis).Kaolin clay was modified using a chemical complex of HH(hydrazine hydrate)and SRSO(sodium salt of rubber seed oil).Intercalation of SRSO into kaolin under optimized condition showed an inter-lamellar layer expansion to 4.668 nm,compared to the characteristic d001 XRD(X-ray diffraction)peak of pristine kaolin at 0.714 nm.The morphology,visco-elastic behavior,modulus property,polymer miscibility and Tg(glass transition temperature)of nano-kaolin filled NR and its blend with synthetic rubbers have been studied in detail.DMA showed a diminution in tanδpeak height and a modulus shift in correspondence with increased CLD(crosslink density).Pure NR shows only~1%increase in storage modulus(E′)while adding nanoclay rather than micron sized pristine clay under experimental conditions,because of the feeble interaction between filler and matrix,as compared to blend.An increment of~76%and~117%in E′was recognized by the addition of 4 wt%nanoclay in blends such as BR mK and NBR mK.With loss modulus(E″)pure NR shows only~7%decrease while adding nanoclay,compared to blend.A decrement of~54%and~55%in E″by the addition of 4 wt%nanoclay in BR mK and NBR mK blends were observed.As a whole,DMA was performed to figure out the effect of surface modification enabling to materialize composite.

Simulation of viscoelastic behavior of defected rock by using numerical manifold method

Numerical simulations of longitudinal wave propagation in a rock bar with microcracks are conducted by using the numerical manifold method which has great advantages in the simulation of discontinuities.Firstly,validation of the numerical manifold method is carried out by simulations of a longitudinal stress wave propagating through intact and cracked rock bars.The behavior of the stress wave traveling in a one-dimensional rock bar with randomly distributed microcracks is subsequently studied.It is revealed that the highly defected rock bar has significant viscoelasticity to the stress wave propagation.Wave attenuation as well as time delay is affected by the length,quantity,specific stiffness of the distributed microcracks as well as the incident stress wave frequency.The storage and loss moduli of the defected rock are also affected by the microcrack properties;however,they are independent of incident stress wave frequency.

Effect of ammonium based ionic liquids on the rheological behavior of the heavy crude oil for high pressure and high temperature conditions

Heavy crude oil(HCO)production,processing,and transportation forms several practical challenges to the oil and gas industry,due to its higher viscosity.Understanding the shear rheology of this HCO is highly important to tackle production and flow assurance.The environmental and economic viability of the conventional methods(thermal or dilution with organic solvents),force the industry to find an alternative.The present study was constructed to investigate the effect of eco-friendly ionic liquids(ILs)on the HCO's rheology,at high temperature and high pressure.Eight different alkyl ammonium ILs were screened for HCO's shear rheology at the temperatures of 25-100℃ and for pressures 0.1e10 MPa.The addition of ILs reduced the HCO's viscosity substantially from 25 to 33%from their original HCO viscosity.Also,it aids to reduce the yield stress to about 15-20%at all the studied experimental conditions.Furthermore,the viscoelastic property of the HCO was studied for both strain-sweep and frequencysweep and noticed the ILs helps to increase HCO's loss modulus(G00)by reducing storage modulus(G0),it leads to the reduction of the crossover point around 25-32%than the standard HCO.Mean the ILs addition with HCO converts its solid-like nature into liquid-like material.Besides,the effect ILs chain length was also studied and found the ILs which has lengthier chain length shows better efficiency on the flow-ability.Finally,the microscopic investigation of the HCO sample was analyzed with and without ILs and witnessed that these ILs help to fragment the flocculated HCO into smaller fractions.These findings indicate that the ILs could be considered as the better alternative for efficient oil production,processing,and transportation.

Strain Amplitude Effect on the Viscoelastic Mechanics of Chloroprene Rubber

This paper establishes an empirical formula to predict the strain amplitude effect.A viscoelastic constitutive model-the superposition of a hyperelastic model and a viscoelastic model-is constructed based on the laws of thermodynamics.The Mooney Rivlin model and the Prony series are employed for uniaxial tension testing.The empirical formula is derived using a hysteresis loop;it obtains results that are in agreement with the experimental results of dynamic mechanical analysis(DMA).The empirical formula proposed in this paper has certain accuracy in predicting the dynamic modulus under different strain amplitudes.