Mg-Y-Zn-Al alloys processed by rapidly solidified ribbon consolidation(RSRC)technique exhibit an exceptional mechanical performance indicating promising application potential.This material has a bimodal microstructure...Mg-Y-Zn-Al alloys processed by rapidly solidified ribbon consolidation(RSRC)technique exhibit an exceptional mechanical performance indicating promising application potential.This material has a bimodal microstructure consisting of fine recrystallized and coarse non-recrystallized grains with solute-rich stacking faults forming cluster arranged layers(CALs)and nanoplates(CANaPs),or complete long period stacking ordered(LPSO)phase.In order to reveal the deformation mechanisms,in-situ synchrotron X-ray diffraction line profile analysis was employed for a detailed study of the dislocation arrangement created during tension in Mg-0.9%Zn-2.05%Y-0.15%Al(at%)alloy.For uncovering the effect of the initial microstructure on the mechanical performance,additional samples were obtained by annealing of the as-consolidated specimen at 300 and 400℃ for 2 h.The heat treatment at 300℃ had no significant effect on the initial microstructure,its evolution during tension and,thus,the overall deformation behavior under tensile loading.On the other hand,annealing at 400℃ resulted in a significant increase of the recrystallized grains fraction and a decrease of the dislocation density,leading to only minor degradation of the mechanical strength.The maximum dislocation density at the failure of the samples corresponding to the plastic strain of 10-25% was estimated to be about 16-20×10^(14)m^(-2).The diffraction profile analysis indicated that most dislocations formed during tension were of non-basal and pyramidal types,what was also in agreement with the Schmid factor values revealed independently from orientation maps.It was also shown that the dislocation-induced Taylor hardening was much lower below the plastic strain of 3% than above this value,which was explained by a model of the interaction between prismatic dislocations and CANaPs/LPSO plates.展开更多
With a surge in the university’s student and staff population, parking problems and congestion have rapidly intensified. The recent inclusion of women drivers, particularly during official working hours, has exacerba...With a surge in the university’s student and staff population, parking problems and congestion have rapidly intensified. The recent inclusion of women drivers, particularly during official working hours, has exacerbated these challenges. This pressing issue underscores the critical necessity for a structured approach to managing university entries and overseeing parking at the gates. The proposed smart parking management system aims to address these concerns by introducing a design concept that restricts unauthorized access and provides exclusive parking privileges to authorized users. Through image processing, the system identifies available parking spaces, relaying real-time information to users via a mobile application. This comprehensive solution also generates detailed reports (daily, weekly, and monthly), aiding university safety authorities in future gate management decisions.展开更多
Mangroves are crucial for protecting coastal areas against extreme disasters such as tsunamis and storm surges.An experimental study was conducted to determine how mangroves can mitigate the tsunami wave propagation.T...Mangroves are crucial for protecting coastal areas against extreme disasters such as tsunamis and storm surges.An experimental study was conducted to determine how mangroves can mitigate the tsunami wave propagation.The test was performed in a flume, where mangrove models were installed on a slope, and dam-burst waves were used to simulate tsunami waves. To study how mangrove forests reduce the impact of tsunamis, this paper measured the heights of the incoming waves under different initial conditions(tsunami wave intensity and initial water depth) and plant factors(arrangement and distribution density) and described the reduction process. The results show that, after passing through the mangrove, the tsunami bore height will decrease within a certain range as the initial water depth increases. However, there is no correlation between the increase of inundation level and the drop of water level. The bore height attenuation is more significant at higher density of mangroves,but after tsunami passing through the mangroves, the relative bore height will decrease. When the distribution density of mangroves is constant, the wave attenuation at different locations(before, on and after the slope)shows different relationships with the initial water depth and wave height for different models. The transmission coefficient(K_(i)) shows a parabolic correlation with its density. The proportion of the energy loss caused by the mangrove resistance to the total energy(E_(b)) is defined as C_(m2). The variation trend of C_(m2) corresponds to the tsunami wave energy attenuation rate(C_(a)) and K_(i).展开更多
基金financially supported by the International Visegrad Fund(project V4-Japan Joint Research Program,Ref.JP3936)the National Research,Development and Innovation Office(Contract No.:2019-2.1.7-ERANET-2021-00030)+1 种基金Support by the Ministry of Education,Youth and Sports of Czech Republic in the framework of Visegrad Group(V4)-Japan Joint Research Program-Advanced Materials under grant No.8F21011supported by JST SICORP Grant Number JPMJSC2109,Japan。
文摘Mg-Y-Zn-Al alloys processed by rapidly solidified ribbon consolidation(RSRC)technique exhibit an exceptional mechanical performance indicating promising application potential.This material has a bimodal microstructure consisting of fine recrystallized and coarse non-recrystallized grains with solute-rich stacking faults forming cluster arranged layers(CALs)and nanoplates(CANaPs),or complete long period stacking ordered(LPSO)phase.In order to reveal the deformation mechanisms,in-situ synchrotron X-ray diffraction line profile analysis was employed for a detailed study of the dislocation arrangement created during tension in Mg-0.9%Zn-2.05%Y-0.15%Al(at%)alloy.For uncovering the effect of the initial microstructure on the mechanical performance,additional samples were obtained by annealing of the as-consolidated specimen at 300 and 400℃ for 2 h.The heat treatment at 300℃ had no significant effect on the initial microstructure,its evolution during tension and,thus,the overall deformation behavior under tensile loading.On the other hand,annealing at 400℃ resulted in a significant increase of the recrystallized grains fraction and a decrease of the dislocation density,leading to only minor degradation of the mechanical strength.The maximum dislocation density at the failure of the samples corresponding to the plastic strain of 10-25% was estimated to be about 16-20×10^(14)m^(-2).The diffraction profile analysis indicated that most dislocations formed during tension were of non-basal and pyramidal types,what was also in agreement with the Schmid factor values revealed independently from orientation maps.It was also shown that the dislocation-induced Taylor hardening was much lower below the plastic strain of 3% than above this value,which was explained by a model of the interaction between prismatic dislocations and CANaPs/LPSO plates.
文摘With a surge in the university’s student and staff population, parking problems and congestion have rapidly intensified. The recent inclusion of women drivers, particularly during official working hours, has exacerbated these challenges. This pressing issue underscores the critical necessity for a structured approach to managing university entries and overseeing parking at the gates. The proposed smart parking management system aims to address these concerns by introducing a design concept that restricts unauthorized access and provides exclusive parking privileges to authorized users. Through image processing, the system identifies available parking spaces, relaying real-time information to users via a mobile application. This comprehensive solution also generates detailed reports (daily, weekly, and monthly), aiding university safety authorities in future gate management decisions.
基金The National Natural Science Foundation of China under contract Nos 51809047 and U22A20585the Fujian Provincial Natural Science Foundation under contract No.2019J05029.
文摘Mangroves are crucial for protecting coastal areas against extreme disasters such as tsunamis and storm surges.An experimental study was conducted to determine how mangroves can mitigate the tsunami wave propagation.The test was performed in a flume, where mangrove models were installed on a slope, and dam-burst waves were used to simulate tsunami waves. To study how mangrove forests reduce the impact of tsunamis, this paper measured the heights of the incoming waves under different initial conditions(tsunami wave intensity and initial water depth) and plant factors(arrangement and distribution density) and described the reduction process. The results show that, after passing through the mangrove, the tsunami bore height will decrease within a certain range as the initial water depth increases. However, there is no correlation between the increase of inundation level and the drop of water level. The bore height attenuation is more significant at higher density of mangroves,but after tsunami passing through the mangroves, the relative bore height will decrease. When the distribution density of mangroves is constant, the wave attenuation at different locations(before, on and after the slope)shows different relationships with the initial water depth and wave height for different models. The transmission coefficient(K_(i)) shows a parabolic correlation with its density. The proportion of the energy loss caused by the mangrove resistance to the total energy(E_(b)) is defined as C_(m2). The variation trend of C_(m2) corresponds to the tsunami wave energy attenuation rate(C_(a)) and K_(i).
