Natural Solar Drying and Charcoal Production by Pyrolysis of Empty Shells of Cocoa Pods Using a Carbonisation Stove Fitted with a Chimney

The world’s production of cocoa highly has grown since 1960.In West Africa,the production reached about 3,000,000 tons in 2012.More than 50%of the world’s production of cocoa comes nowadays from Côte d’Ivoire and Ghana and Côte d’Ivoire is the biggest producer.After harvesting,the empty shells,considered as non-useful wastes,are abandoned in the fields where they become a source of pollution.That yields millions of tons of biomass that can be converted into charcoal,instead of being sources of pollution.In the present work,the drying kinetics of the empty wet shells were studied.Then,charcoal production by pyrolysis of those empty shells of cocoa pods was performed,using a carbonisation stove fitted with a chimney.The study showed that the empty shells have a high moisture content.The different phases of the drying were observed.The study compared the drying rates and the diffusion coefficients of a small sample and a big sample.Two experiences of carbonisation of the empty shells were successfully carried out.For the first experiment,the pyrolysis temperatures were recorded and the charcoal mass efficiency calculated.For the second experiment,the temperatures were higher and the result was colored charcoals.The colorations disappeared after some hours.

野生茄子(Solanum torvum)抗黄萎病相关基因StoVe1的克隆与分析

采用RT-PCR和RACE技术从野生茄子中扩增克隆到一个抗黄萎病相关基因,命名为StoVe1,其cDNA全长3400bp,含有3153bp的完整开放阅读框,编码1051个氨基酸,该基因编码的蛋白序列与刚果野茄、类番茄和番茄Ve1编码的氨基酸序列同源性分别为82%、81%和80%,且有很高的功能区段保守性。将该cDNA全长序列提交GenBank,登陆号为DQ020574。半定量PCR表明该基因为组成型表达,在根中表达最多,叶中最少。

Performance of a Score-Stove with a Kerosene Burner and the Effect of Pressurization of the Working Fluid

Score-StoveTM a clean-burning cooking stove that also generates electricity was tested using a pressurized kerosene burner. The Score-Stove works on the principle of thermo-acoustics to gen- erate small-scale electricity. The device having hot-end, cold-end and regenerator acts in a way similar to a stirling cycle generating acoustic power, which is then converted to electricity using a linear actuator. It can supply small power for applications such as LED lighting, mobile phone charging and radios particularly in rural areas without grid electricity as well as improving house- hold air pollution. After assessing the needs of the rural communities through a survey, tea-stalls and small restaurants owners were identified as clients with the most potential of using the stove in Bangladesh. Bangladesh University of Engineering and Technology ((BUET) modified a Score- Stove to use both wood and a pressurized kerosene burner of a design that is widely used for cooking in rural areas of Bangladesh. The design was adapted to meet performance needs such as: heating rate, cooking efficiency, energy distribution, electric power generation, exhaust emissions and time taken to boil water using standardized water boiling tests. Performance was also compared with conventional (non-electrically generating) stoves that use a pressurized kerosene burn- er. The Score-Stove performance was then evaluated while increasing the pressure of the sealed working fluid (air in this case) from atmospheric to about 1.4 bar. The pressurization was found to almost double the power generation. An arrangement for utilizing cooling water waste heat was also devised in order to improve the thermal performance of the stove by 18%. Technical deficiencies are documented and recommendations for improvements and future research in order to obtain wider end-user acceptance are made.

Influencing Factors of Properties of Castables for Hot Blast Stove Pipes

In order to prolong the service life of castables for hot blast stove pipes,effects of SiO2 micropowder addition and aggregate kind on properties of castables for hot blast stove pipes,and properties of silica sol bonded castables were researched using homogenized bauxite,andalusite particles,andalusite fines,white fused corundum fines,α-Al2O3 micropowder,pure calcium aluminate cement,SiO2 micropowder,and silica sol as starting materials. The results show that：（1） as SiO2 micropowder addition increases,the shrinkage rate of fired specimens increases; BD increases firstly,reaches the highest at 4 mass%,and then decreases; CMOR and CCS of all specimens increase gradually; so the appropriate SiO2 micropowder addition is 4 mass%;（2） the specimens with bauxite aggregate have better CCS and volume stability,but specimens with andalusite aggregate have better thermal shock resistance;（ 3） for castables for hot blast stoves using silica sol as binder,the addition of pure calcium aluminate cement can decrease the linear change rate after treatment at 1 400℃ and can slightly enhance CCS and CMOR,but has very little influence on AP and BD; and the introduction of citric acid worsens the thermal shock resistance of specimens.

Development of Anti-Creep Andalusite-Based Bricks for Blast Furnace Stove

Secondary nudlitization and mineral phase compositions of reacting andalusite of different gain sizes with fine alumina powders are studied. By adopting reasonable process technology to control nudlitization behavior during firing, good anti-creep andalusite bricks have been developed.

Resistance characteristics of the ball packed-bed regenerator of the new-type swirl flow hot blast stove

A renovation project of miniaturization and high efficiency is provided for the hot blast stove .The experimental data tested feasibility of the new-type swirl flow hot blast stove. The normal and hot state experiments have been done through changing the angle of gas entering into the regenerator. Factors influencing pressure drop have been studied and analyzed. The experimental results can be formulated in the form of the Ergun equation. The regression equation is obtained. And two modified coefficients are offered to the regenerator pressure drop of the new-type swirl flow hot blast stove.

Development and Assessment of Thermoacoustic Generators Operating by Waste Heat from Cooking Stove

This paper presents the development and assessment of two low-cost, travelling wave, thermoacoustic generators operating by waste heat energy from cooking stove. One powered by waste heat from a propane-driven stove, the other powered by waste heat from a wood-burning stove. The propane-driven thermoacoustic generator was successfully demonstrated to produce approximately 15 watts of electricity using a commercial audio loudspeaker. The wood-burning thermoacoustic generator was successfully constructed and tested to generate a maximum of 22.7 watts of electricity under a pressurised condition. The latter has a high potential to be used by over 1.5 billion people in rural communities for applications such as LED lighting, charging mobile phones or charging a 12V battery. A comprehensive power assessment of the propane-driving generator as well as the development and performance assessment of the wood-burning generator are described throughout this article.

Development of Thermal Shock Resistant and Low Creep Bricks for Hot Blast Stove

The paper describes the ries with high thermal shock development of brick seresistance and low creep rate for hot blast stove, including research target and research plan on the basis of analysis on how to enhance the thermal shock resistance and to lower creep rate of the bricks. Efforts have been made on the selection of starting materials such as corundum, mullite, andalusite and sillimanite etc., together with some measures taken on multi-grade formulation, homogenizing of the matrix of bricks and addition of some special additives. The results indicated that the bricks were with characteristics such as higher thermal shock resistance of 〉 30 cycles under quenching in water from 1000℃, and creep rate of 0. 2 under 1400℃ for 20 -50hrs with load of 0.2 MPa. Now a series of products of this kind have been developed and produced. The application of the products in Wuhan Iron and Steel Co. showed very prospective results. Now most of domestic large sized blast furnaces say ≥- 1000m^3, including those of Baoshan Iron and Steel Co. , have selected the series products made by Gongyi No. 5 Refractories Head Factory（GYWN） for their hot blast stoves.

Development of Andalusite Bricks for Hot Blast Stove

Low-creep andalusite bricks are characterized by high refractoriness under load, good anti-creep property, high mechanical strength, low porosity, good thermal shock resistance, etc. In this study, low-creep andalusite brick specimens were investigated in the lab using mullite, bauxite and andalusite. Andalusite with the different particle sizes were used in the experiment and the specimen with the best property was selected us the production standard. In addition, the industrial produced low-creep andalusite bricks were compared with other low-creep bricks. The results show that the developed low-creep andalusite bricks is an excellent material for hot blast stove.

Numerical calculation of flow and heat transfer process in the new-type external combustion swirl-flowing hot stove

It is clarified that the important method to improve the blast temperature ofthe small and the middle blast furnaces whose production is about two-thirds of total sum of Chinafrom 1000℃ to 1250-1300℃ is to preheat both their combustion-supporting air and coal gas. The airtemperature of blast furnaces can be reached to 1250-1300℃ by burning single blast furnace coal gasif high speed burner is applied to blast furnaces and new-type external combustion swirl-flowinghot stove is used to preheat their combustion-supporting air. The computational results of the flowand heat transfer processions in the hot stove prove that the surface of the bed of the thermalstorage balls there have not eccentric flow and the flow field and temperature field distribution iseven. The computational results of the blast temperature distribution are similar to thosedetermination experiment data. The numerical results also provide references for developing anddesigning the new-type external combustion swirl-flowing hot stoves.

Exposure to Emissions from Kerosene Cooking Stoves and the Pulmonary Health Status of Women in Olorunda Community, Ibadan, Nigeria

Exposure to high PM10 by women and children for hours on a daily basis in poor ventilated kitchen may lead to respiratory morbidity among this vulnerable group. In Nigeria, data on the levels of air pollutants associated with kerosene stove combustion are very scarce. Like-wise little had been documented on the pulmonary health of women exposed to kerosene stove emission. This study was carried out to measure the levels of kerosene combustion emissions within kitchen environments and also assess the pulmonary function status of the exposed women at baseline. Particulate matter (PM10) and gaseous emissions (GE) were measured in six purposively selected clusters of regular kerosene stove users (KSU) using gravimetric sampler and gas monitors, respectively and their values compared with WHO guideline limits. 167 randomly selected KSU were surveyed to elicit their socio demographic features. A spirometer was used to assess the lung function status (FEV1) of 72 KSU in six neighbourhood kitchen clusters. Data were analysed using descriptive statistics, and Pearson’s correlation tests. Respondents’ mean age was 38 + 12.9 years. Mean duration of exposure to GE was 18.9 + 9.8 years. Mean PM10 was 248.1 + 14.1 μg/m3 and ten folds higher than WHO guideline limit of 25 μg/m3. Mean GE in ppm were: CO (0.00), CO2 (200.1 + 12.4), SO2 (0.01 + 0.00) and NO2 (0.00). Mean FEV1 among KSU was 2.0 + 0.5 litres which was significantly lower than the mean predicted value of 2.7 ± 0.5 litres. There was a negative correlation between PM10 and FEV1 (r = -0.7539, p > 0.05). Safer cooking methods and practices to obviate health hazards are advocated.

Refractory Pellet for Hot Blast Stove

1 Scope This standard specifies the term, definition, classification, specification, technical requirements, test methods, quality appraisal procedures, packing, marking, transportation, storage, and quality certificate of refractory pellet for hot blast stove.

Fireclay Refractory Bricks for Hot Blast Stove

This standard specifies the classification, shape, dimension, technical requirements, test method, inspection rules, packing, marking, transportation, storage and quality certification of fireclay refractory bricks for hot blast stove.

Design and Testing of Biochar Stoves

Biochar is a solid material obtained from the carbonization of biomass. Biochar is used on agricultural lands as a soil amendment to improve the fertility of the soils. Currently the most common method of producing biochar is through biochar stoves. There are two basic stove operations in the production of biochar. The first type of stove produces biochar by direct combustion of biomass. Here biomass is burnt inside a chamber in an oxygen limited environment. The resulting residue is the bio-char. The second type involves burning the biomass in one chamber and housing the biomass to be charred in the annular portion of an outer chamber. Heat is transferred from the burning fuel on the inner chamber to the material to be charred in the outer chamber. While the process of biochar production in these stoves is known, the basic principles of the stove design are not readily available. The design methodology for both the types was developed from first principles. Prototypes of both types were constructed based on the design developed and tested. The paper lists the basic principles in the design of biochar stoves and the test results.

The Efficiency of the Energy Saving Stoves in Amboseli Ecosystem-Analysis of Time, Energy and Carbon Emissions Savings

It is estimated that more than 2.5 billion people worldwide use biomass for cooking. Burning biomass is one of the major contributors to carbon dioxide (CO2) emission—a principle gas in global warming and climate change. One way of cutting down the CO2 emissions is adaptation of efficient and clean energy technologies. This study examined the efficiency of the energy saving stoves in Amboseli ecosystem by comparing the cooking time, energy use, wood fuel and carbon emissions to the traditional three stone open fire set ups. The result indicates a statistical difference in the time spent cooking on energy stoves and three stone open fire (t = 5.3055;n = 60;p = 0.00117). Energy saving stoves saved 12.7% - 33.3% of wood fuel compared to the traditional three stones set ups. Water boiling tests to determine the energy savings, revealed that energy saving stoves saved between 25.74% and 26.16% energy/joule per session in-house and outdoor settings respectively. Based on the two meals prepared per day by each household, the total Carbon Emission Savings for the 1000 local beneficiaries of energy saving stoves varied from 102,200 kg CO2 (indoor cooking) to 357,700 kg CO2 (outdoor cooking) per year. It is therefore concluded that energy saving stoves saves time, fuel wood and energy, and reduces carbon emissions. The study findings refute the claims that open fire when carefully operated can be fuel efficient and clean burning to rival energy saving stoves. To improve the performance of the energy saving stoves, it is recommended that a design modification be done to include a chimney to emit excess smoke during indoor cooking;and the stove should be fixed to the floor with mortar to minimise heat loss and breakages.

Application of Statistical Design of Experiments to Performance Analysis of Charcoal Cooks Stoves

The Design of Experiments (DOE) and the Analysis of Variance (ANOVA) are used to determine the effect of fuel type, fuel initial load, secondary air inlet and ventilation on thermal efficiency and CO emission of two biomass fire cookstoves during boiling or simmering. Analysis of variance with Fischer’s statistical test (F-test) and Newman-Keuls test were applied to establish the influence of the independent parameters on the studied responses. The results of this study are useful to application of charcoal cooks stoves.

Silica Brick for Hot Blast Stove

This standard specifies the glossary and definition, marking, shape and dimension, technical requirements, test method, quality appraisal procedure, packing, label, transportation, storage and quality certification of silica brick for hot blast stove.

Bauxite Based Refractory Bricks for Hot Blast Stove

This standard specifies the technical require-ments, test method, inspection rules, packing, marking, transportation, storage and quality certificate of bauxite based refractory bricks for hot blast stove.

Cordierite Bricks for Ceramic Burner of Hot Blast Stove

1 Scope This standard specifies the classification, brand, technical requirements, shape and dimension, test method, quality appraisal procedure, packing, marking, transportation, storage and quality certificate of eordierite bricks for ceramic burner of blast furnace and hot blast stove.

The influence of particle size on the thermal performance of coal and its derived char in a Union stove

For low-income communities in South Africa,coal is the most common solid fuel which is burnt in a variety of devices,including imbaulas and cast-iron stoves.The present work was conducted with the aim of determining the effect of the fuel particle size on the performance of coal,typically sourced in low-income households in townships in South Africa,and to subsequently compare the performance with a feed char of a common cast iron stove.Four fuel particle sizes of 15,20,30,and 40 mm,as well as a composite of the sizes were tested at 550C,against their untreated coal analogues to evaluate the thermal performance of each fuel.The thermal performance assessment metrics are ignition time,water boiling time,heat transfer and combustion efficiencies,while CO and CO_(2)emissions were measured for the calculations of CO/CO_(2)ratios.Ignition times were found to decrease from coals to chars and to decrease with increasing particle size.The effects of fuel type on the water boiling time were only observed in the later stages of the burn cycle,with the char boiling a 2 L batch of water in an average 24 min,while the coals reported an average boiling time of 20 min.Heat transfer efficiencies showed no significant variation with fuel type or particle size,with the average efficiency for the coals and that of the chars being around 66%.The fuels’performance was better gauged by the combustion efficiency,which was found to improve marginally from the coal fuels to the chars,and to increase with increasing particle size.Results from this testwork could contribute to the performance inventories from the combustion of domestic coal mined in South Africa in a typical cast iron stove which is used in informal settlements.