An alternative form of energy density demonstrating the severe strain-stiffening in thin spherical and cylindrical shells

The present article investigates an elastic instability phenomenon for internally pressurized spherical thin balloons and thin cylindrical tubes composed of incompressible hyperelastic material.A mathematical model is formulated by proposing a new strain energy density function.In the family of limited elastic materials,many material models exhibit strain-stiffening.However,they fail to predict severe strainstiffening in a moderate range of deformations in the stress-strain relations.The proposed energy function contains three material parameters and shows substantially improved stain stiffening properties than the limited elastic material models.The model is further applied to explore the elastic instability phenomenon in spherical and cylindrical shells.The findings are compared with other existing models and validated with experimental results.The model shows better agreement with experimental results and exhibits a substantial strain-stiffening effect than the current models.

Determination of Material Parameters of EVA Foam under Uniaxial Compressive Testing Using Hyperelastic Models

The objective of this research was to determine the mechanical parameter from EVA foam and also investigate its behavior by using Blatz-Ko,Neo-Hookean,Mooney model and experimental test.The physical characteristic of EVA foam was also evaluated by scanning electron microscopy(SEM).The results show that Blatz-Ko and Neo-Hookean model can fit the curve at 5%and 8%strain,respectively.The Mooney model can fit the curve at 50%strain.The modulus of rigidity evaluated from Mooney model is 0.0814±0.0027 MPa.The structure of EVA foam from SEM image shows that EVA structure is a closed cell with homogeneous porous structure.From the result,it is found that Mooney model can adjust the data better than other models.This model can be applied for mechanical response prediction of EVA foam and also for reference value in engineering application.

LARGE DEFORMATION OF INCOMPRFSSIBLE RUBBER CYLINDER UNDER PLANE STRAIN

The large deformation of incompressible rubber cylinder under inner pressure is ana- lyzed by a kind of new rubber materials strain energy function.The theory formulation for the dis- placement and stress is presented.The penalty finite element formulation is established in order to ana- lyze nonlinear rubber materials,and the results of finite element method agree well with theoretical ones.A new method for controlling the calculating stability and convergence rates is put forward.The selection of the appropriate penalty factor and its influence on calculated results are discussed.

Growth of a Void in a Rubber Rectangular Plate under Uniaxial Extension

The finite deformation and stress analyses for a rectangular plate with a center void and made of rubber with the Yeoh elastic strain energy function under uniaxial extension were studied in this paper. An approximation solution was obtained from the minimum potential energy principle. The numerical results for the growth of the cavitation and stresses along the edge of the cavitation were discussed. In addition, the stress concentration phenomenon was considered.

A comparative study of 85 hyperelastic constitutive models for both unfilled rubber and highly filled rubber nanocomposite material

Nonlinear finite element analysis is widely used for structural optimization of the design and the reliability analysis of complex elastomeric components.However,high-precision numerical results cannot be achieved without reliable strain energy functions(SEFs)of the rubber or rubber nanocomposite material.Although hyperelastic constitutive models have been studied for nearly 80 years,selecting one that accurately describes rubber's mechanical response is still a challenge.This work reviews 85 isotropic SEFs based on both the phenomenological theory and the micromechanical network theory proposed from the 1940s to 2019.A fitting algorithm which can realize the automatic fitting optimization and determination of the parameters of all SEFs reviewed is developed.The ability of each SEF to reproduce the experimental data of both the unfilled and highly filled rubber nanocomposite is quantitatively assessed based on a new proposed evaluation index.The top 30 SEFs for the unfilled rubber and the top 14 SEFs for the highly filled rubber nanocomposite are presented in the ranking lists.Finally,some suggestions on how to select an appropriate hyperelastic constitutive model are given,and the perspective on the future progress of constitutive models is summarized.

Void Formation and Growth for a Class of Compressible Hyper-Elastic Sphere

In this paper, the strain energy function proposed by Shang and Cheng was generalized by introducing a nonlinear term. Void formation and growth in the interior of a sphere composed of compressible hyper-elastic material, subjected to a prescribed uniform displacement, was examined. A parametric cavitated bifurcation solution for the radial deformed function was obtained. Stability of the solution of the cavitated bifurcation equation was discussed. With the appearance of a cavity, an interesting feature of the radial deformation near the deformed cavity wall is the transition from extension to compression.

Mechanical performance and negative pressure instability for venous walls

Mechanical properties, such as the deformation and stress distributions for venous walls under the combined load of transmural pressure and axial stretch, are examined within the framework of nonlinear elasticity with one kind of hyper-elastic strain energy functions. The negative pressure instability problem of the venous wall is explained through energy comparison. First, the deformation equation of the venous wall under the combined loads is obtained with a thin-walled circular cylindrical tube. The deformation curves and the stress distributions for the venous wall are given under the normal transmural pressure, and the regulations are discussed. Then, the deformation curves of the venous wall under the negative transmural pressure or the internal pressure less than the external pressure are given. Finally, the negative pressure instability problem is discussed through energy comparison.

AN ANALYSIS MODEL OF PULSATILE BLOOD FLOW IN ARTERIES

Blood flow in artery was treated as the flow under equilibrium state (the steady flow under mean pressure)combined with the periodically small pulsatile flow.Using vascular strain energy function advanced by Fung,the vascular stress_strain relationship under equilibrium state was analyzed and the circumferential and axial elastic moduli were deduced that are expressed while the arterial strains around the equilibrium state are relatively small, so that the equations of vessel wall motion under the pulsatile pressure could be established here.Through solving both the vessel equations and the linear Navier_Stokes equations,the analytic expressions of the blood flow velocities and the vascular displacements were obtained.The influence of the difference between vascular circumferential and axial elasticities on pulsatile blood flow and vascular motion was discussed in details.

Constitutive modeling of particle reinforced rubber-like materials

The present study is focused on the constitutive modeling for the mechanical behavior of rubber reinforced with filler particles.A filler-dependent energy density function is proposed with all the continuum mechanics-based necessities of an effective hyperelastic material model.The proposed invariant-based energy function comprises a single set of material parameters for a material subjected to several modes of loading conditions.The model solution agrees well with existing experimental results.Later,the effect of varying concentrations of filler particles in the rubber matrix is also studied.

Improved Carroll’s hyperelastic model considering compressibility and its finite element implementation

In engineering component design,material models are increasingly used in finite element simulations for an expeditious and less costly analysis of the design prototypes.As such,researchers strive to formulate models that are less complex,robust,and accurate.In the realm of hyperelastic materials,phenomenological-based Carroll’s model is highly promising due to its simplicity and accuracy.This work proposes its further improvement by modifying the strain energy density function to comply with the restriction that it should vanish at reference configuration and adding a compressible term to capture the practical behavior of elastomeric materials and to avoid numerical problems during finite element implementation.The model constants for both the original and the modified versions were obtained by fitting their respective expressions to the classical Treloar’s experimental data using the Levenberg-Marquardt algorithm.The modified model was implemented using Abaqus CAE 2016 via a vectorized user material(VUMAT)subroutine.Comparisons of the model predictions with Treloar’s experimental data demonstrated the superiority of the modified version particularly in the equibiaxial loading mode.Moreover,the simulated and the experimentally observed behavior agreed to a great accuracy thus making the modified model suitable for simulating the loading response of components fabricated of elastomeric materials.