The influence of welding parameters of butt joints, made by three processes (MMA, MAG and T.I.M.E), on their geometric characteristics has been evaluated, which in turn caused a change of the fatigue strength. That fo...The influence of welding parameters of butt joints, made by three processes (MMA, MAG and T.I.M.E), on their geometric characteristics has been evaluated, which in turn caused a change of the fatigue strength. That fore the statistic analysis and FEM were used and a method developed in the Institute of Welding, which consist in a direct connection of parameters used during welding with the fatigue strength of joints welded by various processes. It has been proven, among others, which by using more advanced welding processes (T.I.M.E) the fatigue strength of welded joints can be increased in comparison to joints welded by MMA and MAG.展开更多
This study is carried out to appreciate the coarse elements influence of the gravel lateritic soils on the pavement behavior. The material involves not only the 0/20 mm granular particles considered in the specificati...This study is carried out to appreciate the coarse elements influence of the gravel lateritic soils on the pavement behavior. The material involves not only the 0/20 mm granular particles considered in the specifications and on the laboratory tests, but also all of the material that is actually used in the construction sites. Geotechnical characterization was leaned on five differentiated granular classes of 0/20;0/25;0/31.5;0/40 and 0/63 mm diameters. The sample of 0/40 mm gets the best compaction aptitude, while that of 0/31.5 mm reaches the greatest bearing strength and a good Optimum Moisture Content. According to the requirements and its bearing strengths, the material is usable up to subbase layer and its behavior depends on the grain size.展开更多
文摘The influence of welding parameters of butt joints, made by three processes (MMA, MAG and T.I.M.E), on their geometric characteristics has been evaluated, which in turn caused a change of the fatigue strength. That fore the statistic analysis and FEM were used and a method developed in the Institute of Welding, which consist in a direct connection of parameters used during welding with the fatigue strength of joints welded by various processes. It has been proven, among others, which by using more advanced welding processes (T.I.M.E) the fatigue strength of welded joints can be increased in comparison to joints welded by MMA and MAG.
文摘This study is carried out to appreciate the coarse elements influence of the gravel lateritic soils on the pavement behavior. The material involves not only the 0/20 mm granular particles considered in the specifications and on the laboratory tests, but also all of the material that is actually used in the construction sites. Geotechnical characterization was leaned on five differentiated granular classes of 0/20;0/25;0/31.5;0/40 and 0/63 mm diameters. The sample of 0/40 mm gets the best compaction aptitude, while that of 0/31.5 mm reaches the greatest bearing strength and a good Optimum Moisture Content. According to the requirements and its bearing strengths, the material is usable up to subbase layer and its behavior depends on the grain size.
