Interaction between in situ stress states and tectonic faults:A comment

Understanding the in situ stress state is crucial in many engineering problems and earth science research.The present article presents new insights into the interaction mechanism between the stress state and faults.In situ stresses can be influenced by various factors,one of the most important being the existence of faults.A fault could significantly affect the value and direction of the stress components.Reorientation and magnitude changes in stresses exist adjacent to faults and stress jumps/discontinuities across the fault.By contrast,the change in the stress state may lead to the transformation of faulting type and potential fault reactivation.Qualitative fault reactivation assessment using characteristic parameters under the current stress environment provides a method to assess the slip tendency of faults.The correlation between in situ stresses and fault properties enhances the ability to predict the fault slip tendency via stress measurements,which can be used to further refine the assessment of the fault reactivation risk.In the future,stress measurements at greater depths and long-term continuous real-time stress monitoring near/on key parts of faults will be essential.In addition,much attention needs to be paid to distinguishing the genetic mechanisms of abnormal stress states and the type and scale of stress variations and exploring the mechanisms of pre-faulting anomaly and fault reactivation.

Tectonic Stress State Changes Before and After the Wenchuan M_s 8.0 Earthquake in the Eastern Margin of the Tibetan Plateau

Crustal tectonic activities are essentially the consequences of the accumulation and release of in situ stress. Therefore, studying the stress state near active faults is important for understanding crustal dynamics and earthquake occurrences. In this paper, using in situ stress measurement results obtained by hydraulic fracturing in the vicinity of the Longmenshan fault zone before and after the Wenchuan Ms 8.0 earthquake and finite element modeling, the variation of stress state before and after the Wenchuan M. 8.0 earthquake is investigated. The results show that the shear stress, which is proportional to the difference between principal stresses, increases with depth and distance from the active fault in the calm period or after the earthquakes, and tends to approach to the regional stress level outside the zone influenced by the fault. This distribution appears to gradually reverse with time and the change of fault properties such as frictional strength. With an increase in friction coefficient, low stress areas are reduced and areas with increased stress accumulation are more obvious near the fault. In sections of the fault with high frictional strengths, in situ stress clearly increases in the fault. Stress accumulates more rapidly in the fault zone relative to the surrounding areas, eventually leading to a stress field that peaks at the fault zone. Such a reversal in the stress field between the fault zone and surrounding areas in the magnitude of the stress field is a potential indicator for the occurrence of strong earthquakes.

2-D elastic FEM simulation on stress state in the deep part of a subducted slab

Based upon some simplified numerical models, a 2-D plain strain elastic FEM program is compiled to study the distributions of the stress fields produced by the volume change of the phase transformation from olivine to spinel, by the volume change from temperature variation, and by density difference and boundary action in a piece of subducted slab located in transition zone of the mantle. Thermal stress could explain the fault plane solutions of deep focus earthquakes, but could not explain the distribution of deep seismicity. When large extent metastable olivine is included, the stress field produced by the density difference contradicts with the results of fault plane solutions and with the distribution of deep seismicity. Although the stress produced by volume change of the phase transformation from olivine to spinel dominates the stress state, its main direction is different from the observed results. We conclude that the deep seismicity could not be simply explained by elastic simulation.

Effect of stress state on deformation and fracture of nanocrystalline copper:Molecular dynamics simulation

Deformation in a microcomponent is often constrained by surrounding joined material making the component under mixed loading and multiple stress states. In this study, molecular dynamics （MD） simulation are conducted to probe the effect of stress states on the deformation and fracture of nanocrystalline Cu. Tensile strain is applied on a Cu single crystal, bicrystal and polycrystal respectively, under two different tension boundary conditions. Simulations are first conducted on the bicrystal and polycrystal models without lattice imperfection. The results reveal that, compared with the performance of simulation models under free boundary condition, the transverse stress caused by the constrained boundary condition leads to a much higher tensile stress and can severely limit the plastic deformation, which in return promotes cleavage fracture in the model. Simulations are then performed on Cu single crystal and polycrystal with an initial crack. Under constrained boundary condition, the crack tip propagates rapidly in the single crystal in a cleavage manner while the crack becomes blunting and extends along the grain boundaries in the polycrystal. Under free boundary condition, massive dislocation activities dominate the deformation mechanisms and the crack plays a little role in both single crystals and polycrystals.

Inversion of breakout data from inclined boreholes for stress state of the upper crust in Jizhong depression

The forward and inverse problems of studying crustal stress state from breakout data of inclined boreholes are concisely stated. direction of the maximum horizontal principal stress (compressive) and relative magnitudes of the horizontal stresses to the vertical stress in the upper crust in two regions of the Jizhong depression, the North of China, are obtained by analyzing the breakout data of 6 inclined wells. To get stable results in the analysis wesearched for the unknown parameters both forwardly and inversely. The results show that the maximum azimuths of the horizontal Principal compressive stresses in the central and southern part of the Jizhong depressionare N86°E and N77°E, respeCtively, while the relative magnitudes of the three principal stresses in the uppercrust (about 1000-4000 m) of the depression are variable. In the centra; part of the Jizhong depression we havefound SH : Sv: SK= 1. 38: 1. 00: 0. 57, where SH, SV and Sh are the maximum horizontal, vertical and minimum horizontal stress, resistively. This indicates that the present stress regime in this area is of strike-slipfaulting type. In the southern part of the depreSSion we have obtained SH: Sv: Sh=0. 80: 1. 00 1 0. 62, indicating a normal faulting stress regime in the shallow Part Of the crust.

Hydromechanical behaviors of andesite under different stress states during fluid injection

Water reinjection into the formation is an indispensable operation in many energy engineering practices.This operation involves a complex hydromechanical(HM)coupling process and sometimes even causes unpredictable disasters,such as induced seismicity.It is acknowledged that the relative magnitude and direction of the principal stresses significantly influence the HM behaviors of rocks during injection.However,due to the limitations of current testing techniques,it is still difficult to comprehensively conduct laboratory injection tests under various stress conditions,such as in triaxial extension stress states.To this end,a numerical study of HM changes in rocks during injection under different stress states is conducted.In this model,the saturated rock is first loaded to the target stress state under drainage conditions,and then the stress state is maintained and water is injected from the top to simulate the formation injection operation.Particular attention is given to the difference in HM changes under triaxial compression and extension stresses.This includes the differences in the pore pressure propagation,mean effective stress,volumetric strain,and stress-induced permeability.The numerical results demonstrate that the differential stress will significantly affect the HM behaviors of rocks,but the degree of influence is different under the two triaxial stress states.The HM changes caused by the triaxial compression stress states are generally greater than those of extension,but the differences decrease with increasing differential stress,indicating that the increase in the differential stress will weaken the impact of the stress state on the HM response.In addition,the shear failure potential of fracture planes with various inclination angles is analyzed and summarized under different stress states.It is recommended that engineers could design suitable injection schemes according to different tectonic stress fields versus fault occurrence to reduce the risk of injection-induced seismicity.

Effect of hydrogen content and stress state on room-temperature mechanical properties of Ti-6Al-4V alloy

This work aims to investigate the effects of hydrogen content(in the range of 0%-0.5%,mass fraction)and stress state (tension and compression)on the room-temperature mechanical properties of Ti-6Al-4V alloy through mechanical properties tests. The effects of hydrogen content on microstructure evolution of Ti-6Al-4V alloy is also examined by optical microscopy,X-ray diffractometry,transmission electron microscopy and scanning electron microscopy.The results show that hydrogen content and stress state have important effects on the room-temperature mechanical properties of Ti-6Al-4V alloy.Tensile strength and ultimate elongation decrease with increasing the hydrogen content,while compressive strength and ultimate reduction are improved after hydrogenation.The reason is that the intergranular deformation dominates at the state of tension.Hydrogen atoms in solid solution and hydrides at grain boundaries increase with increasing the hydrogen content and they can promote the initiation and propagation of cracks along grain boundaries.While the intragranular deformation dominates at the state of compression.The plastic beta phase and hydrides increase with increasing the hydrogen content and they improve the ultimate reduction and compressive strength.

Effect of intermediate principal stress on strength of soft rock under complex stress states

A series of numerical simulations of conventional and true triaxial tests for soft rock materials using the three-dimensional finite difference code FLAC3D were presented. A hexahedral element and a strain hardening/softening constitutive model based on the unified strength theory(UST) were used to simulate both the consolidated-undrained(CU) triaxial and the consolidated-drained(CD) true triaxial tests. Based on the results of the true triaxial tests simulation, the effect of the intermediate principal stress on the strength of soft rock was investigated. Finally, an example of an axial compression test for a hard rock pillar with a soft rock interlayer was analyzed using the two-dimensional finite difference code FLAC. The CD true triaxial test simulations for diatomaceous soft rock suggest the peak and residual strengths increase by 30% when the effect of the intermediate principal stress is taken into account. The axial compression for a rock pillar indicated the peak and residual strengths increase six-fold when the soft rock interlayer approached the vertical and the effect of the intermediate principal stress is taken into account.

Experimental study of seepage characteristics of single rock fracture based on stress states and stress history

Through seepage tests under different loading and unloading confining pressures and different hydraulic gradients,the authors studied the effects of stress states and stress history on fracture permeability evolution for single granite fracture and sandstone fracture. The results show that there exists a linear relationship between the seepage discharge and osmotic pressure in sandstone fissure under each level of confining pressure. With the increasing in the confining pressure,the permeability of the fracture decreases,but the decreasing rate is changeing. During the unloading process,the fracture seepage velocity cannot be fully recovered to the size of the loading process. Therefore,in the unloading process of the confining pressure,the recovery of fracture permeability shows obvious hysteresis effects. The flow rate of the fracture remains unchanged during five cycles of loading and unloading processes of the confining pressure. In each cycle,the evolution character of the flow rate with the confining pressure remains unchanged. These experiments show that the seepage characteristics of sandstone and granite fractures are not the same under the same stress state.

The stress state of geological structure and mining dynamic disaster in Fuxin basin

Further evidences show that most mining dynamic disasters are mainly oc- curred nearby NNE and near SN geological structures.In-situ stress measurement in Fuxin basin shows that the orientation of major compressed stress is near EW.At this stress field,geological structures with deferent strike have deferent stress state and dis- place mode.NNE and near SN geological structures are compressed to thrust and come into being high stress zone.NWW and NEE geological structures are tensile to separate and not prone to being low stress zone.NW structure is intervenient of them.So NEE and near SN structures are easy to occurre mining dynamic disasters and NWW and NEE structures is 'safety' comparatively.The mining dynamic disaster is controlled by stress state of geologic structure,which is determined by its strike.

Reexamining the Seismological Implications of the Present-day Stress State of the Yingxiu-Beichuan Fault after the Wenchuan Earthquake

The present-day stress state of the Yingxiu-Beichuan fault after the Wenchuan earthquake was re-estimated using measured in-situ stress data obtained after the Wenchuan earthquake. The results reveal that the gradient coefficients of principal stresses versus depth decrease from south to north along the Yingxiu-Beichuan fault, revealing that the stress level decreases from south to north. The consistency between the present-day stress levels and surface ruptures generated during the earthquake indicates that the accumulated tectonic stress beneath the Yingxiu-Beichuan fault before the Wenchuan earthquake was relieved in form of surface ruptures. This resulted in the stress remaining high in the southern section of the Yingxiu-Beichuan fault but relatively low in the northern section. Abnormal high pore pressure conditions and an extremely low frictional coefficient play important role in the interpretation of the stress field adjustment and seismic events observed after the Wenchuan earthquake along this fault, according to the estimation results using the Coulomb frictional-failure theory incorporating frictional coefficients ranging from 0.4 to 1.0. To accurately estimate the seismological hazard of the Yingxiu-Beichuan fault by analyzing fault instability using the Coulomb frictional-failure theory, much attention should be focused on the pore pressure conditions and the evolution state of the frictional coefficient under the present-day stress state.

Effect of Poisson’s ratio on stress state in the Wenchuan M_S8.0 earthquake fault

The Wenchuan Ms8.0 earthquake occurred on the Longmenshan fault which inclines at a dip angle exceeding 60 degrees. Since most thrust earthquakes occur on faults with dip angles of about 30 degrees, it is enigmatic why the Wenchuan earthquake occurred on such a steep fault. In this study we use a simple finite element model to investigate how the stress state in the fault changes with the variation of Poisson＇s ratio. The results show that, with the Poisson＇s ratio in the fault increasing, the magnitudes of the principal stresses increase and the maximum Shear stress decrease, and, especially, the angle between the maximum principal stress and the fault plane decreases, which will enhance the driving force to overcome the frictional resistance on the fault. The increase of Poisson＇s ratio in the fault may be an important factor to affect the occurrence of the fault earthquakes with large angles between maximum principal stress and fault plane.

2-D viscoelastic FEM simulation on stress state in the deep part of a subducted slab

The characteristics of the stress fields in deep subducting slabs are studied using viscoelastic plain strain finite element method. When introducing the new rheology structure given by Karato, et al into our computation, there emerge two regions with great shear stress just below the olivine-spinel phase transition zone, which encompass the low viscosity zone below the lower tip of the metastable wedge. Further, the directions of the main compressional stress of these two regions are all along the dip direction of the slab. These are in accordance with the seismic observations that there are two deep seismic zones in a slab and the directions of the main compressional stress in these two seismic zones are along the dip direction of the slab. Smaller effective viscosity probably caused by smaller grain size in the phase transformation zone does not have great influence on the stress state in the deep part of the slab. There is the maximum of shear stress at the transition region from olivine to spinel and the direction of the main compressional stress in this region is roughly perpendicular to the trend of the phase boundary no matter whether there exists metastable wedge, which nevertheless do not correspond to some well-known seismic observations.

Mutual impact of true triaxial stress, borehole orientation and bedding inclination on laboratory hydraulic fracturing of Lushan shale

Unconventional resources like shale gas has been the focus of intense research and development for two decades. Apart from intrinsic geologic factors that control the gas shale productivity (e.g. organic matter content, bedding planes, natural fractures, porosity and stress regime among others), external factors like wellbore orientation and stimulation design play a role. In this study, we present a series of true triaxial hydraulic fracturing experiments conducted on Lushan shale to investigate the interplay of internal factors (bedding, natural fractures and in situ stress) and external factors (wellbore orientation) on the growth process of fracture networks in cubic specimens of 200 mm in length. We observe relatively low breakdown pressure and fracture propagation pressure as the wellbore orientation and/or the maximum in situ stress is subparallel to the shale bedding plane. The wellbore orientation has a more prominent effect on the breakdown pressure, but its effect is tapered with increasing angle of bedding inclination. The shale breakdown is followed by an abrupt response in sample displacement, which reflects the stimulated fracture volume. Based on fluid tracer analysis, the morphology of hydraulic fractures (HF) is divided into four categories. Among the categories, activation of bedding planes (bedding failure, BF) and natural fractures (NF) significantly increase bifurcation and fractured areas. Under the same stress regime, a horizontal wellbore is more favorable to enhance the complexity of hydraulic fracture networks. This is attributed to the relatively large surface area in contact with the bedding plane for the horizontal borehole compared to the case with a vertical wellbore. These findings provide important references for hydraulic fracturing design in shale reservoirs.

Advanced test methods of material property characterization:high strain-rate testing and experimental simulation of multiaxial stress states

Optimum utilization of the loading capability of engineering materials is an important and active contribution to protect nature's limited resources,and it is the key for economic design methods.In order to make use of the materials' resources,those must be known very well;but conventional test methods will offer only limited informational value.The range of questions raised is as wide as the application of engineering materials,and partially they are very specific.The development of huge computer powers enables numeric modelling to simulate structural behaviour in rather complex loading environments-so the real material behaviour is known under the given loading conditions.Here the art of material testing design starts.To study the material behaviour under very distinct and specific loading conditions makes it necessary to simulate different temperature ranges,loading speeds, environments etc.and mostly there doesn't exist any commonly agreed test standard.In this contribution two popular,non-standard test procedures and test systems will be discussed on the base of their application background,special design features as well as test results and typically gained information:The demand for highspeed tests up to 1000 s^(-1) of strain rate is very specific and originates primarily in the automotive industry and the answers enable CAE analysis of crashworthiness of vehicle structures under crash conditions.The information on the material behaviour under multiaxial loading conditions is a more general one.Multiaxial stress states can be reduced to an equivalent stress,which allows the evaluation of the material's constraint and criticality of stress state.Both discussed examples shall show that the open dialogue between the user and the producer of testing machines allows custom-tailored test solutions.

DETERMINATION OF STATES OF STRESS AND STRAIN AT POLE OF HYDRAULIC BULGE ORTHOTROPIC SHEET SAMPLE

ＤＥＴＥＲＭＩＮＡＴＩＯＮＯＦＳＴＡＴＥＳＯＦＳＴＲＥＳＳＡＮＤＳＴＲＡＩＮＡＴＰＯＬＥＯＦＨＹＤＲＡＵＬＩＣＢＵＬＧＥＯＲＴＨＯＴＲＯＰＩＣＳＨＥＥＴＳＡＭＰＬＥ￥Ｚｈｏｕ，Ｗｅｉｘｉａｎ；Ｚｈｏｕ，Ｘｉｎ（ＤｅｐａｒｔｍｅｎｔｏｆＡｅｒｏｎａｕｔ...

Preliminaries for a New Mathematical Framework for Modelling Tumour Growth Using Stress State Decomposition Technique

The main goal of the present paper is to present a mathematical framework for modelling tumour growth based on stress state decomposition technique (SSDT). This is a straightforward extension of the model for multi-phase nonsaturated soil consolidation with pollutant transport presented by the authors and may be regarded as an alternative to classical frameworks based on TCAT theory. In this preliminary work, the Representative Volume Element (RVE) for tumour is proposed along with its comparison with the corresponding one for soils modelling developed formerly by the authors. Equations standing for tumour phase are flawlessly brought into correspondence with those of gaseous phase in the soil problem showing that a similar task may be carried out for the remainders phases taking part in both RVEs. Furthermore, stresses induced by nonlinear saturation and permeability dependence on suction for soil interstitial fluids transport finds its counterpart on the contact between the cancer cell membrane and interstitial fluids rendering a higher primary variables coupling degree than what was attained in TCAT theory. From these preliminaries assessments, it may be put forward that likewise the stress state decomposition procedure stands for an alternative for modelling multi-phase nonsaturated soil consolidation with pollutant transport;it does for modelling cancer as well.

Crack growth time dependence analysis of granite under compressive-shear stresses state

The curves of crack relative length lib and crack growth time t of granite were gained under compressive stresses state according to subcritical crack growth parameters and crack stability growth equation by double-torsion constant displacement load relaxa- tion method.The relations between crack relative length and the crack growth time were discussed under different stresses and different crack lengths.The results show that there is a turning point on curve of crack relative length//b and crack growth time of granite.The slope of curve is small when crack relative length is less than the vertical coordinate of the point,and crack grows stably in this case.Cracks grow,encounter and integrate catastro- phically when crack relative length is more than the vertical coordinate of the point,and there is not a gradual stage from crack stability growth to crack instability growth,i.e.rock mass instability is sudden.The curves of crack relative length lib and crack growth time t of granite move to right with decrease of stress σ_1 or crack length a,which implies that limit time increases consequently.The results correspond to practicality.

Stress-Deformed State of Geological Environment and Prognosis of Antropogenic-Tectonic Earthquakes

The highest priorities of any civilized country are in providing interests of social safety.The anthropogenic influence on geological environment is becoming greater because of the human activities increase. That’s why anthropogenic-tectonic earthquake problem has become important recently.It appeared as a hypothesis in the 30 s and became much clearer in 60 s.The anthropogenic-tectonic earthquake epiceneters are located not far from the surface and,as a rule。